Worklist: User Input using UI rather than supplying XML

I'm not sure I understand your exact question, but in general, the
worklist manager is accessed via the Task and Task Worker controls.
In BEA WLI, you would add a Task Worker control to your Pageflow and use
it to work with created tasks.
The Task control is used to create tasks inside a Process.
Steve
Rashmi wrote:
Hi,
I went through the tutorial for Worklist for WLI.
In the example the input from the user was received using XML, if I want to provide
a User Interface (JSP) for submitting such input, is it possible? If so how can
it be done using WLI? Any refrences will be highly appreciated.
Thanks
Rashmi

Similar Messages

How do I ensure user name is shown rather than 'another user' on the 'File in Use' dialog box?

How can I ensure user names are shown rather than just 'another user' on the 'File in Use' dialog box that appears when attempting to edit a checked out document in Microsoft Word/Excel?
All suggestions welcome.

If I recall correctly, that dialog is generated by the Office client product supporting that file type. There would be no way to modify it.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Why won't Compressor let me submit? And why use compressor rather than FCP?

Hey I'm using Compressor with Final Cut Hd and a Powermac g5.
So from Final Cut I've gone to 'Export' using 'Using Compressor', for a piece of Quicktime that I want to convert to Mpeg 4. IN compressor, I've set a MPEG 4 conversion, and I've set a destination. But the 'submit' button hasn't come on, and I can't go ahead with the operation. Can anyone tell me the basic things that would prevent me going ahead with the conversion here - no matter how obvious? I'm a new user, and I don't know what I'm doing wrong... any hints?
Secondly, why do I need to use compressor for this - what's the advantage of using Compressor rather than using the QTconversion panel export from Final Cut Pro?
Thanks for your help with these issues - you guys rock!
Best
Richard

You may not have enough free hard drive spacein your destination folder or your destination folder is Write protected. I've had that problem and compressor will not always tell you why its not giving you the ok to submit yu kind of have to figure it out. *** far as the benifit of useing it the only rel one is that you can continue to use final cut to do other work while compressor is working, ut that only works if you first export it as a fcp Quick time move and then open compressor and drag and drop the fcp full dv or hdv quick time movie into compressor for compression. affter that you can quite compressor without even saving it and it will continue to work in the background only using what ever cpu power you aren't using allowing you to continue to work on other parts or projects.

[svn:fx-3.x] 9493: Applying patch (SDK-22435) submitted by Aaron Boushley which updates ObjectUtil to use toXMLString rather than toString for XML objects .

Revision: 9493
Author:   [email protected]
Date:     2009-08-23 16:09:56 -0700 (Sun, 23 Aug 2009)
Log Message:
Applying patch (SDK-22435) submitted by Aaron Boushley which updates ObjectUtil to use toXMLString rather than toString for XML objects.
QE notes: None
Doc notes: None
Bugs: SDK-13919
Reviewer: N/A
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22435
    http://bugs.adobe.com/jira/browse/SDK-13919
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/utils/ObjectUtil.as

I am trying to add a wireless printer and it keeps asking for an "Ipadmin" user name and password rather than my adminstrator password. Any ideas what this is??

I am trying to add a wireless printer and it keeps asking for an "Ipadmin" user name and password rather than my adminstrator password. Any ideas what this is?

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

[svn:fx-trunk] 5061: Changed the skin to use hostComponent rather than fxComponent so that binding happens on a strongly typed instance .

Revision: 5061
Author: [email protected]
Date: 2009-02-24 14:18:51 -0800 (Tue, 24 Feb 2009)
Log Message:
Changed the skin to use hostComponent rather than fxComponent so that binding happens on a strongly typed instance. By doing this we save the overhead of calling describeType() and doing RTTI. Also updated the backgroundColor to be cast to uint until the getter/setter is updated to return that (currently it is object)
QE: No
Doc: No
Checkintests: Pass
Reviewer: Ryan F & Glenn
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxApplicationSkin.mxml

Revision: 5061
Author: [email protected]
Date: 2009-02-24 14:18:51 -0800 (Tue, 24 Feb 2009)
Log Message:
Changed the skin to use hostComponent rather than fxComponent so that binding happens on a strongly typed instance. By doing this we save the overhead of calling describeType() and doing RTTI. Also updated the backgroundColor to be cast to uint until the getter/setter is updated to return that (currently it is object)
QE: No
Doc: No
Checkintests: Pass
Reviewer: Ryan F & Glenn
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxApplicationSkin.mxml

[svn:osmf:] 14927: Refactor sample to use MediaPlayer rather than traits.

Revision: 14927
Revision: 14927
Author:   [email protected]
Date:     2010-03-22 17:12:29 -0700 (Mon, 22 Mar 2010)
Log Message:
Refactor sample to use MediaPlayer rather than traits. Fix typo in another example.
Modified Paths:
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml
    osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/traceproxy/TraceListene rProxyElement.as

Why should i use JSF rather than Struts?

What makes JSF useful than Struts? In my project I am using like
<h:commandButton action="#{loginbean.execute}" actionListener="#{loginbean.handleEvent}" ..../>
In the above commandButton as you can see that i am not exposing the beanName. However i am exposing the beanMethod which are execute and handleEvent. Is there any other way to hide the name of the method because
From what i understand is Presentation Layer should be shielded from whatever is going on in the backend. So, this doesn't do good right?
Please suggest.
How does Component and Renderers help. I am using encodeEnd() method in Renderer to render what the input or the output should look like. Do we need to switch to JSF from Struts just because of this... I don't see how and why components and renderers could help me..

srikanthradix wrote:
What makes JSF useful than Struts? In my project I am using like
<h:commandButton action="#{loginbean.execute}" actionListener="#{loginbean.handleEvent}" ..../>
In the above commandButton as you can see that i am not exposing the beanName. However i am exposing the beanMethod which are execute and handleEvent. Is there any other way to hide the name of the method because
From what i understand is Presentation Layer should be shielded from whatever is going on in the backend.You can use "binding" and define everything in Java code if you want. You can rename your method to reflect what you want to see in the front end if you want. You can use JSFTemplating to use handlers which can be mapped to any name you want to see and do not have to match the method name of the java class (although I suspect this is the opposite direction from what you are suggesting you want).
EL in jsf (i.e. #{bean.login}) is meant to do the mapping in JSF pages rather than externalize this in a separate file and force the page developer to edit multiple files for simple tasks. Although in some cases navigation is broken out into a separate file (i.e. faces-config.xml file using the default NavigationHandler navigation rules), this can also be done inline. It's a different way of doing development and has its pros and cons (easier, but mixes up presentation and controller somewhat). That said... JSF is very flexible, it CAN externalize any of this information, it just requires you to provide a different ViewHandler information that allows you to enter the data the way you like to see it (imo, you won't realize any benefit from the separation, though -- I used to think it was worth doing but have changed my opinion).
So, this doesn't do good right?Perhaps in theory... but in practice, I don't think it really has a drawback. One caveat, I like how I implemented event handling in JSFTemplating as opposed to action/actionListener attributes which are not configurable and are more opaque than I prefer. My parameterized handlers allow for better code-reuse, but arguably mix up presentation and controller code even more (depending on how they're used).
Please suggest.
How does Component and Renderers help. I am using encodeEnd() method in Renderer to render what the input or the output should look like. Do we need to switch to JSF from Struts just because of this... I don't see how and why components and renderers could help me..The idea of a component helps tremendously as someone else can create a component for you and you can benefit from it. There are many great component sets available on the market (for free and for purchase). For example: Woodstock (which has drag/drop support inside NetBeans), RichFaces, IceFaces, Tomahawk, Scales, etc.
Renderers allow you to cleanly separate the presentation of a component with the data of the component. You can then switch out the presentation to support multiple markups (i.e. client devices). In addition, JSF's rich lifecycle provide logical places for certain types of operations to occur, the renderers participate in this so that they are performing their tasks at a well defined time. And finally, many different components may re-use the same renderer, or a single component may use one of several renderers. The separation of data and display (model and view) makes this very clean.
JSF is not Struts. If you expect it to be struts, you may be disappointed (or if you expect struts to be JSF, you'll be disappointed). JSF has a lot to offer (as does struts), you have to decide what is important to you and your organization. Some things to consider wrt to JSF: very strong vendor support; many large set of components to choose from; multiple standards-based tools to choose from; very flexible (most parts of the framework are pluggable); active growing development community; component-based model which encapsulates complexity for things like Ajax, pagination, and other things (often complicated in a non-component architecture); good integration with other frameworks.
I don't know if this makes your decision any easier, but hopefully it helps clarify how you should be viewing JSF & Struts.
Good luck!
Ken Paulsen
https://jsftemplating.dev.java.net

How do I change the examples to use Oracle rather than Cloudscape

I set up the JDBC connector and can ping my Oracle DB from WebLogic. I know what
to run the first EJB example using the Entity beans and persisting with the CMP.
I built a table in Oracle - just don't know the process for talking to Oracle
rather than to Cloudscape which seems to start automatically with the Examples
server. I have the JDBC code, but where do I put it? What config files need to
be modified?
Thanks!

rcolbroth wrote:
Is there anyway of creatiing a different name for this Folder rather than 2013?
If you are using one of Lightroom's "date-based" folder templates, then the folders are created in accordance with the image capture date, not the date that you happen to import it. If you specifically want to use the import date for your folder names then you probably don't want to use the Lightroom date template, and instead you'll need to setup your folder names manually.
The vast majority of users that use date-based folder naming schemes will use a standard Lightroom template, i.e. based on the much more meaningful image capture date.

Can I use thumbnails rather than the {sitename} to load different galleries?

Hi all-
I'm new to Spry and all things Javascripting but I'm attempting to construct a image gallery using Spry in Dreamweaver CS3. I've used the "Original Photo Gallery" from the Spry Demo folder as a jumping off point and everything works correctly.
I would like to know if it is possible to use representative thumbnails rather than the select dropdown to launch the different galleries? I'm sure it is, but I'm a total neophyte and have no idea what to do. I'd like to set up a AP Div with 9 thumbnails in a table that would each launch a different gallery. How do I do that?
Jimmy

Hello, because you're SELECTing tournament.tourtype in the SELECT list, the answer is not really. If you didn't need t.tourtype in the SELECT list, you could have:
select m.memberid, m.lastname, m.firstname
from member m
where exists (select 1
        from entry e inner join tournament t on (e.tourid=t.tourid)
        where m.memberid=e.memberid
            and upper(t.tourtype)='OPEN');And you know the t.tourtype is 'OPEN' anyway, so you don't need to SELECT it. So you could have this, and the answer is yes:
select m.memberid, m.lastname, m.firstname, 'OPEN' tourtype
from member m
where exists (select 1
        from entry e inner join tournament t on (e.tourid=t.tourid)
        where m.memberid=e.memberid
            and upper(t.tourtype)='OPEN');Edited by: SeánMacGC on May 7, 2009 2:09 AM

How can I get iTunes to use voucher rather than credit card when downloading to iPod touch?

How can I set up an iPod touch so that it uses iTunes vouchers when downloading apps etc rather than charging to a credit card?

Hello, Helen.
Thank you for visiting Apple Support Communities.
Here is the best resource on how iTunes Store purchase are billed.
iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
Regards,
Jason H.

Why use JPDK rather than Pl/SQL PDK

Hi All,
currently I have deployed all my portlets using the Pl/SQL PDK which is very good, but slow to create portlets in that it takes time to create each portlet.
what are the advans / disadvans to using the Java PDK to create portlets ?
I perfer to wqork at the PDK level rather than the portal application level as I have found the PDK portlets much more portable / scalable when installoing on different servers.
Any information on the JPDK would be very helpful.
thanks Darragh

Hello,
Thanks for your answer, it's very helpful. I'm still looking for a strategy to link the VO and the EO though. I thought about registering the EO in the VO as normally, but not use it in the query (obviously) then override the ViewRow and do some funky stuff in the various 'set' methods to do something like:
setAttributeInternal(index, value);
// somehow push the value in the EOHowever, programatically pushing the value in the EO from the VO seems trivial so far, but I'm not sure how good the result will be. I'll test it to see how well it works, but if there's any documentation about that subject that you know of, it would be appreciated.
Thanks,
~ Simon

Log In using Query Rather Than a Table

I am using CS5.
I would to login but get the username and password from a query rather than a table.
I am using ASP Vbscript. The server behavior onlyl shows the tables, not the tables and queries.
I can change the SQL and it works but there must a better way,.
Thanks

I don't think there is a better way. Defining a recordset based on a query is fine, but it's not something that DW handles natively.

I want Firefox to open a new session each time I use it rather than to try to recover my previous one; how do I go about this?

What more details do you need? I want to open a new session when I use your product rather than have the product go through the slow tedious process of trying to recreate the previous session.

Please see this support article on [[Session Restore]]. Follow the instructions under the "Configuring session restore" header. When you get to the step where it says "Show my windows and tabs from last time" you can choose from showing your homepage or showing a blank page instead.

Accepting dynamiv user input using PL/SQL

Hi,
I need to accept dynamic number of user input values.
What i need is i will enter the number of employees to be created.
If i enter 2 then i need to dynamically accept 2 employee details.
DECLARE
   v_emp_cnt    NUMBER;
   v_emp_id     VARCHAR2 (15);
   v_emp_name   VARCHAR2 (200);
BEGIN
   v_emp_cnt := &v_emp_cnt;
   FOR i IN 1 .. v_emp_Cnt
   LOOP
      DBMS_OUTPUT.PUT_LINE('INSIDE LOOP');
      v_emp_id := &v_emp_id;
      v_emp_desc := &v_emp_Desc;
      INSERT INTO emp_details (process_id,
                                        column11,
                                        column12,
                                        column13)
        VALUES   ('EMPLOYEES',
                  'EMP-' || i,
                  v_emp_id,
                  v_emp_desc);
   END LOOP;
END;
/Can anyone let me know if this is the right approach to acheive my requirement. Please suggest alternatives.
Thanks
Vamsi Krishna

PL/SQL is a server-side language-- it doesn't have the ability to interact with a user. A client application such as SQL*Plus, can both prompt for input and submit SQL statements to the database. It's probably possible to hack together a SQL*Plus script that could do something like what you appear to be looking for but using SQL*Plus for this sort of thing would generally be the wrong architectural solution. You'd generally be better off with a small shell script that prompted the user for data and then called a stored procedure.
Justin

Worklist: User Input using UI rather than supplying XML

Similar Messages

Maybe you are looking for