Workload Analysis and Exception Analysys Overview data n/a
Hello,
About Root cause analysis.
In Workload Analysis and Exception Analysys, the KPI data, in right pane of overview tab,
is always n/a.
In the other tab, e.g. ABAP and Java instance tab, the data is diplayed.
So I think data could be properly stored in BI.
Please give me some advice what setup is missing.
Regards
SAPNote1032461
Similar Messages
-
End-to-End Workload Analysis: Architecture
Hi there,
I have read in training material about E2E Workload Analysis (from SAP) the following statement:
"On ABAP-based components, the workload related data is extracted from statistical files and is written in BI"
The picture in the training material shows, that e.g. Java and .Net needs a Diagnostics Agent. But for ABAP-based components only a RFC Interface is necessary.
Is it possible to use the E2E Workload Analysis without installing any Agent on the ABAP-System?
And are there any jobs which must be scheduled on the ABAP-System alternatively on the Solution Manager?
If I start the Workload Analysis and chose a ABAP-System, there are no statistical data.
Thanks for your reply!
Best regards,
AndreasHi there,
The ABAP systems connect using RFC, but it is just one of the required connections that are maintained among satellite and managing system. (this is actually established in the managed system configuration, step 1).
The actual data is collected by SMD Agent, that pools several other services in the sattelite system itself, such as SAPOSCOL and SAP CCMS.
There's a PDF attached to SAP note 1332428 called TroubleShootingGuideEhP1.pdf, go to page 4. The picture in this page is great to show how everything works. There you can see all the connections.
The answer to your question is no, unfortunately. Make sure you follow the "Managed System Configuration" in the solman_setup, this will ensure you have everything that is needed for workload analysis, including SMD Agent.
Please refer to note 1435043 to address what is needed for Workload Analsysis. Managed system configuration fits in item 5 of this note.
I hope this is helpful for you.
Best regards,
Guilherme Balbinot -
No data in Workload Analysis overview in E2E Analysis for TREX
Hi,
I'm not getting any data in E2e Workload analysis Overview screen for TREX system. Data is available in all other screens and extractors are running fine. I'm using Solution Manager 7.1 SP10. Kindly help me.
Regards,
PragadeesHi Pragadeesh,
Your system landscape definition in SMSY seems to be wrong. The products selected at the Setup Wizard for the managed system must exist in SMSY in order to run the extractos correctly.
Please refer to the Root Cause Analysis Landscape Guide available
at http://service.sap.com/diagnostics -> media library for additional information.
1) Upgrade CIM model according to note 669669.
2) Download the latest version of note 1468591 and apply it using SNOTE
3) Check note 1259109, download the latest configuration file and apply it
Additionally, it is highly recommended to patch your LM-SERVICE SP09
with the latest patch (1) according to note 1599627.
Thanks
Vikram -
SMD: no data for E2E Workload Analysis are shown
Hello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 3) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors and I could see the data in all the steps (E2E Workload, E2E Change Analysis).
Unfortunately since 2 months I can see any data in (E2E Workload, E2E Change Analysis, E2E Exception Analysis).
The E2E_EXTRACTOR_CONTROLLER job runs and is enclosed here
16.04.2008 E2E: Extractor Controller 1
EC: 16.04.2008 14:05:11 UTC Extractor Controller started for SID E11
EC: 16.04.2008 16:05:11 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 14:05:11 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:11 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:12 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:14 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:14 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:14 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:16 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:16 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:16 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
16.04.2008 E2E: Extractor Controller 2
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:16 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:18 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:18 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:18 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:18 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:20 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:20 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:20 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:20 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
16.04.2008 E2E: Extractor Controller 3
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:21 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:21 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Can some one help to solve this problem.
Thank you very much
regards
ThomHello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 3) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors and I could see the data in all the steps (E2E Workload, E2E Change Analysis).
Unfortunately since 2 months I can see any data in (E2E Workload, E2E Change Analysis, E2E Exception Analysis).
The E2E_EXTRACTOR_CONTROLLER job runs and is enclosed here
16.04.2008 E2E: Extractor Controller 1
EC: 16.04.2008 14:05:11 UTC Extractor Controller started for SID E11
EC: 16.04.2008 16:05:11 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 14:05:11 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:11 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:12 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:14 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:14 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:14 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:16 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:16 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:16 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
16.04.2008 E2E: Extractor Controller 2
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:16 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:18 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:18 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:18 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:18 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:20 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:20 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:20 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:20 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
16.04.2008 E2E: Extractor Controller 3
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:21 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:21 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Can some one help to solve this problem.
Thank you very much
regards
Thom -
SMD on SP15: no data for E2E Workload Analysis are shown
Hello!
I have successfully run Setup Wizard for the satellite solution "EP Portal on 6.40".
Unfortunately no data for E2E Workload Analysis are shown since more than one month.
I use SAP Solution Manager with SP 15, BI CONT 9
I have implemented the following SAP notes:
1088163, 1107804, 110782, 1119766
The jobs E2E_EXTRACTOR_CONTROLLER are running without errors.
Enclosed one of those for portal solution:
09.04.2008 E2E: Extractor Controller 1
EC: 09.04.2008 13:05:52 UTC Extractor Controller started for SID B11
EC: 09.04.2008 15:05:52 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 13:05:52 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:52 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:52 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:54 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/APPLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/APPLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/APPLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/DUMP_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
09.04.2008 E2E: Extractor Controller 2
ME: 13:05:54 UTC Calling Extractor /SDF/DUMP_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/DUMP_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/SYSLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/SYSLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/SYSLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/UPDATE_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/UPDATE_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
09.04.2008 E2E: Extractor Controller 3
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:55 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:55 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 13:05:56 UTC Receiving return code 6 from
E2E_JAVA_EXTRACTOR_IF
ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 13:05:56 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:57 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:57 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR
09.04.2008 E2E: Extractor Controller 4
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 08.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 08.04.2008 12 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 08.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR ,
Extractor Class:
ME: 13:05:58 UTC Receiving return code 98 from
/SDF/IDOC_THROUGHPUT_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:58 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:00 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_C_TRANSPORTS
09.04.2008 E2E: Extractor Controller 5
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:01 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
09.04.2008 E2E: Extractor Controller 6
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:06:02 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:02 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F55_XI_IDOC_ADAPTER
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:02 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:02 UTC Calling Extractor F55_XI_IDOC_ADAPTER
ME: No Data Found.
ME: 13:06:02 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_C_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
09.04.2008 E2E: Extractor Controller 7
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_SSR_EXTRACTOR_IF
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: Local Execution of Extractor.
EC: ME called in Multi-Mode.
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor E2E_SSR_EXTRACTOR_IF ,
Extractor Class:
E2E_SSR_EXTRACTOR_0CCMSATPH
ME: 13:06:06 UTC Receiving return code 0 from
E2E_SSR_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:06 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Any helpful information will be appreciated
regards
ThomSame problem being observed in our Solman system (SP15). Below are the errors observed in the spool output of E2E framework jobs,
1] ME: Data Loader Error occurred.
EC: 21:05:44 UTC Main Extractor raises exception. No Data returned by extractor.
2] No action - TSL parameter detected.
This extractor is not allowed to run outside time frame
3] ME: 21:05:45 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 21:05:45 UTC Main Extractor raises exception. No Data returned by extractor.
4] ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 21:05:46 UTC Main Extractor raises exception. No Data returned by extractor.
Tried referring E2E workload analysis guide...no use..the issues have not been covered in that. -
WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection
Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas ChangGosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang, -
No data in RunSAP workload analysis
Hi Experts,
I've installed solution manager 7.0 EHP1 and configured to execute End-to-End Analysis.
And I can use Wily Introscope Workstation to display realtime data and history data.
But in solution manager workcenter, I can't get any data from workload analysis.
I've used t-code CCMSBISETUP to setup BI and everything looks fine.
What other things should I check?
Thanks!Hello,
Please make sure that your system fulfills all the pre-requisites. The following note will point you to the right one depending on the release level of your system:
1274287 End-to-End Diagnostics
Make sure your systems are well defined, as of EHP1 is mandatory the use of SLD. Please check the following document:
http://service.sap.com/diagnostics
Media Library...
SAP Solution Manager Landscape Setup Guide
Further information can be found ate SAP Note 1435043.
1435043 E2E Workload Analysis - No applicable data found
Regards,
Allam Drebes -
Hi!
Win 8.1 pro, domain workstation. How Block all access, except for a fews users/groups and domain controller information/date.
Nuance:
From domain AD is locked Workstation Firewall "Domain profile" edit.
Possible?
cenubitHi GirtsR,
I am not sure the command to use the SID to accomplish what you want to achieve, if you only know the SID, you could take use Powershell to find the related information, more information, please check:
Working with SIDs
And a similar thread for reference:
How to find user/group known only SID
More reference: Default local groups.
Best regards
Michael Shao
TechNet Community Support -
Vendor due date analysis and vendor aging wise analysis
Could u please explain vendor due date analysis and vendor aging wise analysis. what is the differnce between and with t code y specify
Hi Venkatkumar,
Vendor due date analysis refers to the date on which the bill becomes due for payment based on the payment terms and base date. It gives a detailed report of all vendors whose bill have become due for payment on a particular date (Key Date).
Vendor agewise analysis refers to the grouping of amounts due to vendors for various periods, for e.g. 0-30 Days, 31-60 Days, 61-90 Days & so on.
T code for Vendor due date analysis is S_ALR_87012078 - Due Date Analysis for Open Items.
T code for Vendor agewise analysis S_ALR_87012084 - Open Items - Vendor Due Date Forecast
Thank You.
Regards,
Ameet -
Hey, i have an iphone 4, and it is upto date, the problem is that my phone does not play any videos online except on facebook, all other videos do not play instead a crossed play sign appears on the video. Please help.
I watch YouTube videos on a regular basis - mostly with the YouTube app but also with Safari.
Some YouTube videos are supported to be viewed on a computer only or with a Flash capable device, which is becoming few and far between since Adobe no longer supports Flash on any mobile platform.
Sometimes I get this video cannot be played on this platform, but rarely. -
Time based chunks error - WORKLOAD ANALYSIS (INTROSCOPE DATA)
Hi All,
I'm getting time based chunks error for WORKLOAD ANALYSIS (INTROSCOPE DATA) extractor repeatedly. None of the extractor run is successful. I'm using Solution Manager 7.1 SP10.
Any kind advise is most welcome.
Regards,
PragadeesHi Pragadees,
the string "... time based chuncks ..." indicates that you have a backlog which is processed by the EFWK currently. Normal process is indeed to improve the resource capacity of SolMan (as Roland suggested) or at the managed system.
Please have a look at the link below for further explanation.
EFWK_TROUBLESHOOTING - Technical Operations - SCN Wiki
Best regards, Alexander -
Significance of Rescheduling Date and Exception group
Hi Guys:
could you somebody explain the significance of reschedule date and exception group in MD04 Transaction?.
thanks
swethHi,
Rescheduling dates are not stored, they are calculated dynamically every time you execute or refresh MD04.
Rescheduling date is based on the Stocks Requirement date. It does not take into account the parameters in Procurement and Scheduling in the Material Master. In the net requirements calculation, the system checks whether warehouse stock or firmed receipts are available to cover requirements. If a material shortage exists, the system usually creates a new procurement proposal.
Most catchable runtime errors are assigned to exception groups. For this go through the link. Thanking you.
http://www.sapnet.ru/abap_docu/ABENSYSEXC-ERRKL.htm -
Phone went through wash and everthing is now working except for the data. Phone keeps searching...
My phone went throught the wash and everything is now working except for the data. It keeps searching...
You can try getting a new microSIM for it. How long did you let it dry?
-
Diagnostics Workload Analysis - Java Memory Usage gives BI query input
Dears
I have set up diagnostics (aka root cause analysis) at a customer side and I'm bumping into the problem that on the Java Memory Usage tab in Workload analyis the BI query input overview is given
Sol Man 7.0 EHP1 SPS20 (ST component SP19)
Wily Introscope 8.2.3.5
Introscope Agent 8.2.3.5
Diagnostics Agent 7.20
When I click on the check button there I get the following:
Value "JAVA MEMORY USAGE" for variable "E2E Metric Type Variable" is invalid
I already checked multiple SAP Notes like the implementation of the latest EWA EA WA xml file for the Sol Man stack version.
I already reactivated BI content using report CCMS_BI_SETUP_E2E and it gave no errors.
The content is getting filled in Wily Introscope, extractors on Solution Manager are running and capturing records (>0).
Did anyone come accross this issue already?
ERROR MESSAGE:
Diagnosis
Characteristic value "JAVA MEMORY USAGE" is not valid for variable E2E Metric Type Variable.
Procedure
Enter a valid value for the characteristic. The value help, for example, provides you with suggestions. If no information is available here, then perhaps no characteristic values exist for the characteristic.
If the variable for 0DATE or 0CALDAY has been created and is being used as a key date for a hierarchy, check whether the hierarchies used are valid for this characteristic. The same is valid for variables that refer to the hierarchy version.
Notification Number BRAIN 643
Kind regards
Tom
Edited by: Tom Cenens on Mar 10, 2011 2:30 PMHello Paul
I checked the guide earlier on today. I also asked someone with more BI knowledge to take a look with me but it seems the root cause analysis data fetching isn't really the same as what is normally done in BI with BI cubes so it's hard to determine why the data fetch is not working properly.
The extractors are running fine, I couldn't find any more errors in the diagnostics agent log files (in debug mode) and I don't find other errors for the SAP system.
I tried reactivating the BI content but it seems to be fine (no errors). I reran the managed system setup which also works.
One of the problems I did notice is the fact that the managed SAP systems are half virtualized. They aren't completely virtualized (no seperate ip address) but they are using virtual hostnames which also causes issues with Root Cause Analysis as I cannot install only one agent because I cannot assign it to the managed systems and when I install one agent per SAP system I have the message that there are already agents reporting to the Enterprise Manager residing on the same host. I don't know if this could influence the data extractor. I doubt it because in Wily the data is being fetched fine.
The only thing that it not working at the moment is the workload analysis - java memory analysis tab. It holds the Key Performance Indicators for the J2EE engine (garbage collection %). I can see them in Wily Introscope where they are available and fine.
When I looked at the infocubes together with a BI team member, it seemed the infocube for daily stats on performance was getting filled properly (through RSA1) but the infocube for hourly stats wasn't getting filled properly. This is also visible in the workload analysis, data from yesterday displays fine in workload analysis overview for example but data from an hour ago doesn't.
I do have to state the Solution Manager doesn't match the prerequisites (post processing notes are not present after SP-stack update, SLD content is not up to date) but I could not push through those changes within a short timeframe as the Solution Manager is also used for other scenarios and it would be too disruptive at this moment.
If I can't fix it I will have to explain to the customer why some parts are not working and request them to handle the missing items so the prerequisites are met.
One of the notes I found described a similar issue and noted it could be caused due to an old XML file structure so I updated the XML file to the latest version.
The SAPOscol also throwed errors in the beginning strange enough. I had the Host Agent installed and updated and the SAPOscol service was running properly through the Host Agent as a service. The diagnostics agent tries to start SAPOscol in /usr/sap/<SID>/SMDA<instance number>/exe which does not hold the SAPOscol executable. I suppose it's a bug from SAP? After copying the SAPOscol from the Host Agent to the location of the SMD Agent the error disappeared. Instead the agent tries to start SAPOscol but then notices SAPOscol is already running and writes in the log that SAPOscol is already running properly and a startup is not neccesary.
To me it comes down the point where I have little faith in the scenario if the Solution Manager and the managed SAP systems are not maintained and up to date 100%. I could open a customer message but the first advice will be to patch the Solution Manager and meet the prerequisites.
Another pain point is the fact that if the managed SAP systems are not 100% correct in transaction SMSY it also causes heaps of issues. Changing the SAP system there isn't a fast operation as it can be included in numerous logical components, projects, scenario's (CHARM) and it causes disruption to daily work.
All in all I have mixed feelings about the implementation, I want to deliver a fully working scenario but it's near impossible due to the fact that the prerequisites are not met. I hope the customer will still be happy with what is delivered.
I sure do hope some of these issues are handled in Solution Manager 7.1. I will certainly mail my concerns to the development team and hope they can handle some or all of them.
Kind regards
Tom -
What is difference between bex analyser and bex browser
what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.
hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
· BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
· Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
· Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
· Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna
Maybe you are looking for
-
My iPhone is not showing up in iTunes, or Windows Explorer.
I have looked around searching and tried to uninstall everything that had anything to do with Apple and iTunes. Nothing worked. I also have gone into the computer managment and stopping and starting the apple managment and iPod service. Still, nothin
-
Hello: We are planning to begin technical upgrade in SAP, from 46C to ECC 6.0. I have the next landscape: -Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8 -New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10
-
Only reseting the cleared documents with exchange rate differences in FBRA
Hello, we want only reset the cleared documents . We dont want to reverse the cleard documents. But When we try to do it we get a message Exchage difference are posted do you want to reverse it. Want we want to reset are in Doc.. currency. postings f
-
Help with editing a cell in a JTable. DESPERATE
Hi! Is there someone out there that could help with some source code for editing a cell in my JTable when I run it as an applet?? It works fine when I run it as an application. I manage to select the row and write a number in it, but I can't get out
-
Ucm backup-archive-restore strategy
hi fellow oracle-stellent users, i wanna ask what's the best practice strategy for backup and restore of an ucm server: content, metadata, and configs. i'm in the middle of reading the docs (10gR3), but still confused about many components that must