Workpace 11.1.2.2 shows just shared services

Hi,
I've installed EPM 11.1.2.2 in a windows 2008 64x machine, the components I've installed are: Shared Services, Planning, CalcManager, EPMA and Reporting. When I open workspace I can see just if I open Administer: Shared Services Console and I can't see Hyperion Planning or calculation Manager even if the services are up. For planning par example if I use the direct url it's working fine and I will add also that my admin user have the highest levels of provisioning so he's dimension editor + Planning Application creator + calculation manager administrator + ...etc
Did someone please have an idea about this?
Thanks
Edited by: user10367483 on 12 nov. 2012 08:22

I have the same result if I use http://server:19000/workspace/, I will add that if I use Calculation Manager direct url http://server:19000/calcmgr/index.htm the system reorient to workspace and after login I get the warning message: *"Please make sure that the Application you are trying to launch is registered with SharedServices. Shared Services must be running for the feature you are trying to access. Close the current browser window and try logging into workspace again after a little while. Contact your administrator for further information*." and my user is a calculation manager administrator I don't know if it's something linked to this new version 11.1.2.2
Any idea?
Cheers,
Abder

Similar Messages

Planning project not showing in shared services and planning app wizard

I installed planning ver 9.3.1 and now when want to create a planning application, the 'planning' option is not showing in app wizard. It is also not showing in shared services project list. Can you please guide...
Thanks & Regards.

Thanks for the reply. I can login to planning AppWizard but when want to create a planning application, in the drop down of shared services project, the 'planning' option is not coming.
As I have installed planning afresh, so right now no planning application I have in my computer. so, no meaning to login to http://localhost:8300/HyperionPlanning/ because it is showing 'no application'.
Please revert back for any clarifications.
Thanks & Regards.

EPM Architect not showing in Shared Services Application list

I have installed and configured system 11.1.1.3 and created and deploy applications in Workspace using EPMA. However when I open the Foundation list, I do not see EPM Architect in the list. Is there something I need to do to create EPM in shared services? All the functions of EPMA seem to be working properly.
Thanks,

Thanks for the reply. I can login to planning AppWizard but when want to create a planning application, in the drop down of shared services project, the 'planning' option is not coming.
As I have installed planning afresh, so right now no planning application I have in my computer. so, no meaning to login to http://localhost:8300/HyperionPlanning/ because it is showing 'no application'.
Please revert back for any clarifications.
Thanks & Regards.

Cannot Connect to Shared Services DB after 11.1 installation

I uninstalled 9.3.1 and then installed 11.1
When I start the configuration process, the foundation services asks to connect to the Shared Services Database. I don't get the option of selecting Perform 1st Time Configuration (it is greyed out), the only choice is connect to previously configured shared services database. When I put in the name of the other shared services database, from the 9.3.1 installation, I get the following error:
Shared Services database content not found in the specified database
I am go to the uninstaller, but there is not an option to uninstall just shared services.
Any ideas would be appreciated

John,
I renamed the file in the C:\Program Files\Common Files\InstallShield\Universal\common\Gen1\_vpddb directory. When I ran the configuration again, I still do not get the option to configure a new db, and I still get the error from the original post.
I have attached the vpd.properties file the was just created
#HSQL database
#Tue Feb 03 12:51:13 EST 2009
sql.strict_fk=true
readonly=false
sql.strong_fk=true
hsqldb.version=1.7.1
version=1.7.1
hsqldb.cache_scale=14
sql.compare_in_locale=false
sql.month=true
hsqldb.log_size=200
modified=no
hsqldb.cache_version=1.7.0
hsqldb.original_version=1.7.1
hsqldb.compatible_version=1.7.0
sql.enforce_size=false
Russ

Essbase Application Doesn't show up in Selected Roles in shared services

Hello all,
I have few essbase applications which donot show up in the"Selected roles" column in Shared services though the user has been provisioned with the application. Infact the provisioned users can access the application based on the provisioning, but just that I as an administrator donot see it there in the selected roles department. Again this is only in "Selected roles" column meaning I can see it in the "Available roles" column. The application has been registered in EAS and I have also refreshed the security in EAS. We are on 11.1.1.4. Any ideas anyone?
Thanks,
Ted.
Edited by: Teddd on Jan 10, 2013 9:43 AM

Working with Oracle on it, they think it is a bug.

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself

Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself

If you have Pages you can create customs pages for your book as TD suggested. If you have Pages from iWork 09 or 11 this app will add 80 or so additional frames to those offered: Frames and Strokes Installer. Don't use it on the latest Pages version, however.
This tutorial shows how to create a custom page with the theme's background: iP11 - Creating a Custom Page, with the Theme's Background for an iPhoto Book. Once the page is complete to get it into iPhoto as a jpeg file follow these steps:
Here's how to get any file into iPhoto as a jpeg file:
1 - open the file in any application that will open it.
2 - type Command+P to start the print process.
3 - click on the PDF button and select "Save PDF to iPhoto".
NOTE: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 300 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
4 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
5 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. For books to be printed choose 300 dpi.

HT1539 why does the download only show in shared content on my ipad? and can i access the shared content without wifi ( example driving in car?)

I am using the icloud from a pc, and sharing with my ipad ( 1st generation) new to this. I have downloaded some digital copies into my itunes account. On my Ipad one shows under movies and 2 show under shared. Y is this and can shared content be accessed without being contected to my home wifi?

I did a little bit more research, and if I go into iTunes and choose to display TV Shows and Movies as a List, I get a nice, sortable list of movies and shows to which I can add columns. A column that you can add is called "iCloud Status."
This column shows either Purchased or Ineligible for all of the titles. And this is where things get really confusing.
Sure enough, the items that are "missing" from the iPads, iPhone, Apple TV, etc. are the Ineligible items, but that's not the confusing part. What IS confusing is which items are Ineligible.
A good example is my Deadliest Catch collection -- I own the entire season 3 and 4 of DC; season 3 is Purchased and Season 4 is Ineligible. Back to the Big Bang Theory, I have five episodes from Season 4 -- 3 are Ineligible and 2 are Purchased.
It makes absolutely no sense that episodes from the same season of the same show would be a mix of Purchased and Ineligible!

HT1688 My iphone 3GS is showing no service your network is restriced you can choose a different network in settings ive tried a restore and upgrading software/downgrading still no fix just no service searching...

My iphone 3GS is showing no service your network is restriced you can choose a different network in settings ive tried a restore and upgrading software/downgrading still no fix just no service searching...
I have no idea why this has happend ive been using the phone for 2years bought it on pay as you go and now all of a sudden its stating the above error i have never come across this problem before and currently im using 3GS and Iphone 4S

Sounds like it's been blacklisted.
Even if it hasn't, downgrading voids any warranty and forfeits all rights to support. You hacked your phone. You can't get help here.

FAQ: Can I filter the photos to show just those taken by someone, or liked, or commented on?

FAQ: Can I filter the photos to show just those taken by someone, or liked, or commented on?
Answer:
Yes, GroupPix can show you just subsets of photos at a time.
To see just the photos from a particular person,
iOS: go into full screen view for a photo, then tap that person's name; you will see a grid showing only those photos contributed by that person.
Android: go into an event, select the menu under the Event name, and tap 'Photographer' to show a list of contributors to an event. Tap a person to see their photos.
To see photos that are liked or have comments, tap the Filter button in the upper-left of the screen. Then, choose just Liked Photos or Commented Photos.
Tap the back arrow to return to full the Group Album.

FAQ: Can I filter the photos to show just those taken by someone, or liked, or commented on?
Answer:
Yes, GroupPix can show you just subsets of photos at a time.
To see just the photos from a particular person,
iOS: go into full screen view for a photo, then tap that person's name; you will see a grid showing only those photos contributed by that person.
Android: go into an event, select the menu under the Event name, and tap 'Photographer' to show a list of contributors to an event. Tap a person to see their photos.
To see photos that are liked or have comments, tap the Filter button in the upper-left of the screen. Then, choose just Liked Photos or Commented Photos.
Tap the back arrow to return to full the Group Album.

Yahoo is my home page and News, Sports, Business links now shows a few sentences after each main URL link. How do I put it back to show just the URL links?

Yahoo is my home page and News, Sports, Business categories/links changed and now shows a few sentences after each main URL link/topic. How do I put it back to show just the URL links/topics without having to scroll down and down the page. All the extra sentences after the links causes too much scrolling to view the topics.

Those steps did not solve my problem. Here is an example of what I see although it's not exact copy/paste. All I want to see are the links but I get all the verbiage after the links
Firefox 17.0.1 version
''' '''Ask Stacy: How Can I Rebuild My Credit?''''''
Here’s a question familiar to millions of Americans… Stacy, My wife and I recently filed for bankruptcy due to high medical bills we were unable to pay. We purposefully didn’t add our Wells Fargo credit ...
Money Talks News
'''Analysis: High stakes for Cuba in Chavez's cancer battle'''
HAVANA (Reuters) - As Venezuelan President Hugo Chavez recovers in Havana from his fourth cancer operation, Cubans face renewed worries about their economic future if the country's top ally dies or has to step down from office. Cuba has staked its economic well-being on the success - and generosity…
41 mins agoReuters
[$$] Playing FICC or Treat With Bank Investors
'''Playing FICC or Treat With Bank Investors'''
The Wall Street Journal
AdChoices
'''Cybergeddon
A digital crime thriller from Anthony E. Zuicker, the creator of CSI. Only on Yahoo!
And here is what Internet Explore shows: All LINKS below
'''Molten gold signals mining's return to Calif.'s Mother Lode'''
'''Century-old fight for Budweiser name hits new snag'''
'''NRA goes silent after Connecticut school shooting'''
'''.Authorities: Kansas man who killed 2 cops dies'''

Active Directory not showing up in Shared Service Console

Hi,
I successfully installed EPM Version 11.1.1.1.0 in my PC, can able to access shared services through URL. But I have not seen Active Directory configured, i believe this will taken care automatically during software installation.
I was seeing AD last week, this monday I uninstalled and installed, this time missing AD showing up. I make use of NTLM directory.
Could you please suggest me how to add this AD in shared service console...Its kind of urgent ..please help.
Regards,
UB

But to my surprise, how come I am not able to see this now. I was seeing the AD last week and in fact, i did uninstalls and installs several times, did not face such kind of issues.
Could you please clarify how this has gone from the shared services.
Regards, UB

.: Modifing JSP View to show just part of a select with a WHERE :.

Friends,
I have a table and for this table I've created a view. I want to use this view in order to show just records for some id. I can do this using a where clause, but I would like to know where can I put this where clause. Anybody knos it?
Thanks!

If by "view" you mean ADF Business Components "View Object" then you can edit your view object component in JDeveloper and visit the "Query" panel to type in the WHERE clause that you need.
You can also set the Where clause at runtime if needed, by using the setWhereClause() API.
Both the design-time specified where clause, and the optional runtime-added where clause can have bind variables.
You have to set them programmatically using the setWhereClauseParam() or setWhereClauseParams() API on ViewObject.

Old Computer Name Shows in Shared

My wife's old iMac's name is showing in Shared on the other two macs on the network as well as the new iMac's name. The new name is correctly displayed on her mac and there is no sign of the old name on her new iMac.
How can I stop the old name appearing in Shared on the network.
Joe

Which machine shows your old computer name, the mac or the sony?
If the sony, try opening a dos window and enter
ipconfig /flushdns
I think the equivalent function on the Mac can be found in Network Utility

Mail shows just my first name. Please help me

Hello, if I write an email with my MAIL program, everybody can just see my first name. This is very unprofessional. In the Mail settings is in the Account information my full name stated. But it still shows just my first name. How can I change it, that my full name is showing up? Is there anybody who can help me? My actually mail program is GMX. Thank you!!

Hi Do,
In general: Good power supply is very important for xsan. My friend Lucas was called for help at a client which had an xsan volume which was completely broken after a few power outages within 1 day. All data was lost. So the general advise is to make sure your system always has power. Some hints:
1 Make sure the Xraid has batteries. This will keep the caches alive when power fails.
2 Behind the UPS you can put a power device (I do not know the english name, but I mean a device which burns Gasoline or Diesel and deliveres Watts)
Your questions:
1. What will hapend if Xserv Raid (controler )will restart or power off. ?
2. What will hapend if Swith is power off more than 1 minutes
3. What will hapend if XservRaid will power of+ data trafiic will stop. drop frames on Final Cut, But that does not matter much since these machines will have no power also.
+ writes are not finished. Indexes on metadata are not updated. your filesystem will be corrupted. A chkdsk might fix this.
4 Did i need to make some special configuration for Qlogic. or i can youse any ports and plug in Storage and Server in same port .
Yes you have to configure the ports.
Hosts and storage devices need different settings. This has to do with FC resets. On hosts : enable RSCN suppression, and disable device scan. On targets(xraid) do it vice versa.
Also I suggest you do zoning on your switches.
Hope this helps
Donald

Workpace 11.1.2.2 shows just shared services

Similar Messages

Maybe you are looking for