Workprocess in hold

Hi guys,
In R/3 systems(4.7 with SQL) when i saw workprocess in SM50 which are in PRIV mode with Hold status but i saw same workprocesses in SM66 they are same PRIV mode but with stopped status.
why same workprocesses are showing different status in different SM50 and SM66.
any body know reason please let me know...
regards,
Pulla Rao

stoped/hold statuses means process is waiting for samething
(for example OS), there is a good explanation on each state in SM50/SM66, by pressing F1 on the process mode,
The status of hold in SM66 is equivalence to status stopped in SM50.
please notice that user that got to PRIV mode,
means he took quite a lot of memory,
the the WAS can not release the memory (by doing roll-out),
untill the user would leave the transaction
that's the reason why users, who get to PRIV, gets the meesage "please leave transaction before taking a brake"

Similar Messages

Workprocess goes in hold

Hello Forum,
I am running a job in background. i have to releas it from SM37.
Sometimes, when a brarchive start parallel, the workprocess of this job goes to status hold and does nothing more. The Error
occurs always at the same time- when brarchive running. Otherwise the Interfacejob runs without errors (several times a day).
You have an explanation for this?
Thank a lot on advance.
Best reggards
Lutz

Did you look into the work process trace? is there any error messages? In SM50, double click it, what does it say it's doing?
Are all of your work processes busy? Are there at least 1 available of each type (BTC, DIA, UPD, UP2)?

Status Hold in SM50 reason Private mode

Dear all,
BIP PROD system , one of the work process got status shows hold (Reason private mode)
3    DIA     12699     On Hold     PRIV     Yes     1               11070     SAPMSSY1     400     MASOND
In SM04 i have checked that particular user , i got below details .
400     MASOND     0200-00020     SESSION_MANAGER     14.25.41     1     GUI     0
No Transaction                          Time
1   Session Manager Menu Tree Display    14:25:41
i have checked trace file in SM50 its shows below details log of that particular WP.
last few lines of Trace Data: dbcipwp_BWP_02dev_w3 :
M Mon May 2 09:31:56 2011
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server ap01jrp_JRP_20 on host ap01jrp (wp 6)
M * ERROR       Warning: EM-Memory exhausted: Workprocess gets PRIV
M *
M * TIME        Mon May 2 09:31:56 2011
M * RELEASE     700
M * COMPONENT   EM
M * VERSION     37
M * RC          7
M * MODULE      emxx.c
M * LINE        1897
M * COUNTER     274285
M *
M *****************************************************************************
M
S
S Mon May 2 09:34:25 2011
S found spool memory service RSPO-ACTIONS at c000000083446750
B table logging switched off for all clients
C build_stmt: reallocating stmt buffer: 2000 -> 3002 characters
B
B Mon May 2 09:41:26 2011
B create_con (con_name=R/3*TIMESTAMP)
B New connection 2 created
B Mon May 2 09:41:30 2011
B create_con (con_name=R/3*WB)
B New connection 3 created
B
B Mon May 2 09:41:39 2011
B create_con (con_name=R/3*)
B New connection 4 created
C
C Mon May 2 10:16:07 2011
C Disconnecting from connection 1 ...
C Closing user session (con_hdl=1,svchp=6000000002fbc578,usrhp=6000000002fbbfe8)
C Now I'm disconnected from ORACLE
B Disconnected from connection con_da={R/3*,1028657,4}
C
C Mon May 2 10:16:56 2011
C application info callback registered
C Client NLS setting (OCINlsGetInfo): connection handle 1 -> 'AMERICAN_AMERICA.WE8DEC'
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@BWP on connection 1 (nls_hdl 0) ... (dbsl 701 220409)
C Nls CharacterSet                 NationalCharSet                   EnvHp      ErrHp ErrHpBatch

Contiune of log details :
C    0 WE8DEC                                                    60000000028940c0 600000000289ba40 600000000289f428
C Starting user session: OCISessionBegin(con_hdl=1, usr='/',svchp=60000000030a5a18, srvhp=60000000028a16a8, usrhp=6000000003ce5ae8)
C Now '/@BWP' is connected: con_hdl=1, nls_hdl=0, session_id=132.
C Got SAPR3's password from OPS$-user
C Disconnecting from connection 1 ...
C Closing user session (con_hdl=1,svchp=60000000030a5a18,usrhp=6000000003ce5ae8)
C Now I'm disconnected from ORACLE
C Connecting as SAPR3/<pwd>@BWP on connection 1 (nls_hdl 0) ... (dbsl 701 220409)
C Nls CharacterSet                 NationalCharSet                   EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    60000000028940c0 600000000289ba40 600000000289f428
C Starting user session: OCISessionBegin(con_hdl=1, usr=SAPR3/<pwd>, svchp=60000000030a5a18, srvhp=60000000028a16a8, usrhp=60000000
C Now 'SAPR3/<pwd>@BWP' is connected: con_hdl=1, nls_hdl=0, session_id=132.
C DB instance BWP is running on dee with ORACLE version 10.2.0.4.0 since DEC 12, 2010, 19:35:29
B Connection 1 opened (DBSL handle 1)
B Wp Hdl ConName                        ConId     ConState     TX HC PRM RCT FRC TIM MAX OPT Date     Time   DBHost
B 003 000 R/3                            000000000 ACTIVE       NO NO YES NO NO 000 255 255 20110502 091949 dee
B 003 001 R/3*BWMON                      003014083 ACTIVE       NO NO NO NO NO 004 255 255 20110502 101656 dee
B 003 002 R/3*TIMESTAMP                  003014075 DISCONNECTED NO NO NO NO NO 004 255 255 20110502 095141 dee
B 003 003 R/3*WB                         003014076 DISCONNECTED NO NO NO NO NO 004 255 255 20110502 095212 dee
B 003 004 R/3*                           001028657 DISCONNECTED NO NO NO NO NO 000 255 255 20110502 101607 dee
C
C Mon May 2 10:16:58 2011
C build_stmt: reallocating stmt buffer: 3328 -> 4329 characters
C build_stmt: reallocating stmt buffer: 4329 -> 5331 characters
C
C Mon May 2 10:17:06 2011
C build_stmt: reallocating stmt buffer: 1792 -> 2798 characters
C build_stmt: reallocating stmt buffer: 2798 -> 3800 characters
M
M Mon May 2 10:18:17 2011
M *** WARNING => PfSetGuiTime: gui time too large, discard (gui=1319609000/resptime=0)
A
A Mon May 2 10:25:35 2011
A WP has reached abap/heaplimit = 40000000 bytes
C
C Mon May 2 10:41:07 2011
C Disconnecting from connection 1 ...
C Closing user session (con_hdl=1,svchp=60000000030a5a18,usrhp=6000000003ce5ae8)
C Now I'm disconnected from ORACLE
B Disconnected from connection con_da={R/3*,3014086,4}
C
C Mon May 2 14:23:21 2011
C application info callback registered
C Client NLS setting (OCINlsGetInfo): connection handle 1 -> 'AMERICAN_AMERICA.WE8DEC'
C Logon as OPS$-user to get SAPR3's password

WPs are in On Hold RFC status

Dear all,
In SM50, very often I see the WPs in On Hold status and RFC as reason. For DIA WPs, the status changes after I refresh. But for SPO WPs, that status stayslonger.
a.) May I know what is this On Hold RFC status about ?
b.) Will this pose performance problem to the system ?
c.) Is there anything I can check or change to improve it ?
Your comment and advice will be appreciated.
Thanks.
Regards,
Kent

Dear Kent,
1. In general ON Hold status of the workprocess is that during processing if RFC calls or waits for another RFC or some process is supposed to get complete,those cases staus will be in on hold.This is only an example,there can be many reason for on hold status of the Wp.More details can be obtained in Wp trace files.
2.Sometimes it leads to performace problems,especially if there are more wp's are in on hold status results in the bottlenecks of the availablity of wp's, as a result transactions that were running or if new users got logged in are effected.
3.Check the trace files of the work process in SM50 and also from where these RFC's got initiated.If possible check dev_rfc<wp no> files in work directory for more details.
Best Regards,
Shyam Dontamsetty

Holding and restarting background jobs

We are going perform a code page conversion of our SAP system this weekend. The conversion is expected to run Friday at 5:00pm thru Sunday at 8:00pm. We are planning to run program btctrns1 to hold the jobs on Friday at 5:00pm and then run btctrns2 to release the jobs on Sunday. My question is what happens to jobs that were scheduled to run on Friday evening or Saturday. Will these jobs get run as soon as they are released on Sunday? What if they were workday only jobs and Saturday or Sunday are not workdays. Thank you in advance for any insight you can provide on this.

Hi Russ.
all the jobs which are in status "released" will start to run, if the job scheduler finds an empty workprocess for them.
The date and time of the jobs is not affected if you execute btctrns1 they will just get a special status.
So after running btctrns2 everything works as normal again. This of course means workday jobs still will be scheduled only on workdays. But the rescheduling is done right before the job is executed. So a worday-only job normaly should not be scheduled for Sunday (if this is no workday).
I hope I made myself clear...
By the way, the ABAP Batch scheduling is explained in SAP class ADM100.
Regards,
Sascha

RFC calls in DIA workprocess

Dear All,
    bacth jobs are active and communicate to dia workprocess via RFC .
    All the jobs are runing batch user :batch _admnin
    Issue:some jobs are occupied more dia workprocees and no resource availble (SARFC)
    How to find out which jobs holding More dialog workprocess via RFC
   No of jobs running under batch _admin :55
Thanks,
Thiru

Hello Thiru,
But my question is particaular time which jobs holding more dia work process .
- You should list out all background jobs which have run at that particular time and go through the job logs. Few jobs clearly displays in job logs that how many parallel processes are initiated by that job. If you don't see that information in the job details, please check with the owner of the job or program whether it's created to initiate parallel processing.
Hope your query is answered.
Thanks,
Siva Kumar

Maximum work process hold time exceed

Dear all,
One of my SAP user got the below error in SAP PROD server , kindly check below logs .
u201CIRP maximum work process hold time exceed. This may be caused by network problems or slow front-end-systems.u201D
Note : SAP Gui also latest installed , still the user got the above error .
Kindly suggest

This error message means that the SAP server (a workprocess) wanted to send data to the frontend (SAPGUI) but the frontend didn't either confirm that the data could be sent or the data didn'T reach the frontend at all.
As already specified in the error message itself this can be caused by a slow (swapping) frontend or by network problems.
Another reason can be local firewalls or firewalls between the server and the frontend.
Markus

Problem push and hold on a Surface Pro tablet's touch screen

Hi,
I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
Does anyone have a suggestion?
Any help would be greatly appreciated.
Chris

Previous Post.
http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

How much RAM can my Macbook Pro hold MAX?

Can my Macbook Pro hold a MAX of 8GB or is it just 4GB? I'm getting different answers online and I'm a little annoyed at this point. My computer specs currently are:
15 inch Laptop
MacBook Pro 2.6 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM.
Got my computer in 2009.
At Crucial.com it says it can hold up to 8GB when I select my computer processor speed from their list, but I noticed it saying DDR3 (and I don't know what that means to be honest). Here's the link:
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=7F3A5584A5CA7304
To the best of my knowledge I selected the correct computer, which I own, from their list.
Under "About This Mac", on my computer, it says DDR2 for the memory, on Crucial.com it says DDR3. As a result I'm confused and will that cause problems?
I'll be getting my RAM kit from Crucial.com, so do I buy the 4BG kit, because that's all my laptop can handle, or is it OK to get the 8GB kit, which says DDR3?
I do a lot of video and audio, so I would like to get my RAM up to 8 GB if it will.
Thanks

One more question friend....You've been so helpful
Will these two sticks work together on my machine?
2GB, 200-pin SODIMM, DDR2 PC2-5300 memory module
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=B54C51B4A5CA7304
along with a...
4GB 200-pin SODIMM DDR2 PC2-6400 Memory Module
http://www.amazon.com/Crucial-CT51264AC800-200-pin-SODIMM-PC2-6400/dp/B001RB21JE
So these two would add up to 6GB total. Now the ONLY DIFFERENCE that I see is the 2GB stick is PC2-5300(667Mhz)speed and the 4GB stick is PC2-6400(800Mhz)speed. I understand that my machine won't run at the 800Mhz speed that the PC2-6400 stick is designed for, cause my machine says 667 under the memory info. From what I read online, it's ok to put a higher Mhz stick in there, it will just cap at 667Mhz speed? But.......both sticks are DDR2, which is right for my computer, but will the 667 MHz with a 800 Mhz be a huge no-no to run together? At this point I think that is my main concern! If I can't do this, than I think I'll have to go with the 2x2GB kit for 4GB total, but I REALLY would like to run 6GB.
Shew.... :P
Thanks again!

How can multiple threads hold the same lock?

I was always under the impression that no 2 threads could hold a lock for the same object, and yet the HotSpot traces say this is happening all the time.
For example Object 0x0a6c1bf8 is locked in 2 threads:
"10.129.24.35-1" daemon prio=6 tid=0x2836bad0 nid=0x9d4 runnable [0x2b28f000..0x2b28fc9c]
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
- locked <0x2493f6e0> (a java.net.SocksSocketImpl)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at org.jacorb.orb.factory.PortRangeSocketFactory.doCreateSocket(PortRangeSocketFactory.java:142)
at org.jacorb.orb.factory.AbstractSocketFactory.createSocket(AbstractSocketFactory.java:54)
at org.jacorb.orb.iiop.ClientIIOPConnection.createSocket(ClientIIOPConnection.java:313)
at org.jacorb.orb.iiop.ClientIIOPConnection.connect(ClientIIOPConnection.java:160)
- locked <0x0a6c1b98> (a org.jacorb.orb.iiop.ClientIIOPConnection)
at org.jacorb.orb.giop.GIOPConnection.sendMessage(GIOPConnection.java:934)
- locked <0x0a6c1bf8> (a java.lang.Object)
at org.jacorb.orb.giop.GIOPConnection.sendRequest(GIOPConnection.java:900)
at org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java:323)
at org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java:304)
at org.jacorb.orb.Delegate.invoke_internal(Delegate.java:1024)
- locked <0x0d434a88> (a java.lang.Object)
at org.jacorb.orb.Delegate.invoke(Delegate.java:939)
at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:80)
at com.company.MyApp._StateChangeListenerStub.newChanges(_StateChangeListenerStub.java:33)
at com.company.MyAppManager.ListenerOneway.send(ListenerOneway.java:65)
at com.company.MyAppManager.Sender.run(Sender.java:139)
"ClientMessageReceptor840" daemon prio=6 tid=0x2a3ab988 nid=0x6b4 in Object.wait() [0x2f70f000..0x2f70fb1c]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:474)
at org.jacorb.orb.giop.GIOPConnection.waitUntilConnected(GIOPConnection.java:278)
- locked <0x0a6c1bf8> (a java.lang.Object)
at org.jacorb.orb.giop.GIOPConnection.getMessage(GIOPConnection.java:318)
at org.jacorb.orb.giop.GIOPConnection.receiveMessages(GIOPConnection.java:464)
at org.jacorb.orb.giop.MessageReceptor.doWork(MessageReceptor.java:71)
at org.jacorb.util.threadpool.ConsumerTie.run(ConsumerTie.java:61)
at java.lang.Thread.run(Thread.java:595)
Have I miss-interpreted the HotSpot stack trace?

To summarise they are both in a synchronized block on the same mutex/Object, but one is in a wait and one isn't.
So then it follows that if the HotSpot thread reads " - waiting on <address>" like:
"SomeThread" daemon prio=6 tid=0x29a06658 nid=0xf28 in Object.wait() [0x2b18f000..0x2b18fa1c]
at java.lang.Object.wait(Native Method)
- waiting on <address> (a javax.swing.TimerQueue)
at com.comp.SomeThread.run(TimerQueue.java:236)
- locked <0x09539510> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
then it means that the thread is trying to enter the synchronized block on the same mutex/Object but it can't because there is another thread in there which is running, so it is waiting on the outside of the lock instead of the inside of the lock like "ClientMessageReceptor840".
Ok, I think I get it now. Thanks everyone for your help.

Email pdf to iPad - is there a way to open multiple pdfs at one time without having to hold each individually and open with adobe reader?

I have a large number of pdf files to send to an iPad and it is taking forever to hold down each one and then choose to open with adobe reader. Just wondering if there is a way to select all from the email to do the same action?

Not that i know of but an alternate would be to use something like dropbox instead of mail. Their app works very well.

I can't order more than one picture at a time in iphoto. I am holding the command key down and highlighting two but only the last one is showing up

Hi,
I need help placing an iphoto order online for prints. I have a few pictures I want in a few sizes and it seems to only allow me to select one at a time. I have held the command key down but it defaults to the last picture i selected. I appreciate your help.

What system and iPhoto versions are you using? As a quick test try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. See if you can get all of the selected photos in the order window as it should be.
If you can't then try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

My iPhone 4S can no longer hold a charge, had battery replaced once before and is only 2 years old

I've had my iPhone 4S for two years and I still have one more year in my contract.
The first month I had my phone I had similar battery issues where the phone was able to hold a charge over 3 hours. I never have wifi or Bluetooth on, I do not even have internet connection for Safari on. I tested charging it up to %100 and not touch it and after 2 hours it dies.
I would love to get a new iPhone 5c but then I would need to pay off the rest my contract and purchase the new phone and get a new contract. I do not have a warranty for my phone so would taking it to the Apple store and having them replace my battery be worth it? And would I have to pay for them to fix the battery again? Would they give me a replacement phone as well?

Who replaced the battery the first time? If it was anyone other than Apple, your phone is unsupportable. Apple won't touch it either in or out of warranty.

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

Can I config timesten not to hold all data in memory?

In our production environment we use a server with 32GB memory to run Timesten, but developer machine only have 2GB memory. Now we are going to fix some issue that require duplicate the production data to Developer machine, can we have config timesten not to hold all data in memory so that it is possible to duplicate the production data to Developer machine? Is timesten support something like cache table as hsql?
http://hsqldb.sourceforge.net/web/hsqlFAQ.html#BIGRESULTS

TimesTen is an in-memory database. All the data that is managed directly by TimesTen must be 'in memory' and the machine hosting the datastore must have enough physical memory or system performance will be severely degraded.
The only way to have a combined in-memory and on-disk solution is to introduce a backend Oracle database (10g or 11g) and use TimesTen cache connect. Of course, this then becomes a very different configuration and depending on what 'issue' it is that you need to investigate and fix the change to a Cache Connect configuration may hinder that investigation.
Chris

Workprocess in hold

Similar Messages

Maybe you are looking for