Works but not x2 iPad2.  WiFi network is the same for printer and all Apple devices.  Help.

We are unable to print from ipad2 using Epson Artisan 730 printer.  Software download to Macbook was successful but unable to download software to x2 iPad2.  All Apple devices are on the same WiFi.  I followed the Epson instructions but message box pops up stating Safari unable to download file.  Any suggestions.

Welcome to Apple Discussions.
The iPad and iPad 2 using iOS do not use the same software as your Mac using OS X.
They are entirely different operating systems.
Look in the iPad Apps Store for Epson iPrint app for iPad. It is free.
The Artisan 730 is one of the printers the app supports, so this app should allow you to print from your iPad.
If you're looking from the Mac side, open iTunes, and the iTunes Store, then the App Store, and search for Epson iPrint for iPad

Similar Messages

  • HT3529 I have had my iPhone unlocked properly but now on my new network, with the same number, iMessage and push notifications have stopped working. Any solutions?

    I have tried restoring my iphone twice as recommened by my local apple store staff, still no luck

    Is the new carrier you're using an official iPhone carrier? Apple warns that not all features of an iPhone will be available when using an iPhone with a non-supported carrier.
    Who is your new carrier?

  • AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

    To use AirPlay, you need the following:
    1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
    2. Apple TV (2nd or 3rd generation)
    3. AirPort Express
    4. Wi-Fi (802.11a/g/n) network
    http://support.apple.com/kb/ht4437

  • HT1555 My Apple TV wasn't working so I returned it. I kept the same remote from my previous Apple TV and it's not responding to it. What should I do?

    My Apple TV wasn't working so I returned it. I kept the same remote from my previous Apple TV and it's not responding to it. What should I do?

    Don't you have 2 Apple remotes now?
    Either way, hold menu and down key together for 6 secs and that should fix it unless the remote is broken or battery is flat.
    AC

  • HT4623 I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

    I am trying to update my iPad 32 with retina display and whenever I do it tells me that I am not connected to the Internet even though I am. I have tried several different wifi spots with the same results. Any suggestions would be helpful. Thanks

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • "Material is not the same for confirmation and delivery"

    Hello
    If this is not the right forum, my apologies. Direct me to the correct one if it is not ....
    Have been doing automated test development (HP's QTP) against SAP systems for over a year. I am not an application expert - very much a newbie when it comes to application knowledge but trying to gain some. I have "googled" the phase "Material is not the same for confirmation and delivery" and have not been able to find any references. What does this mean?
    I see this message for an iDoc using WE02. Have looked and looked but don't really know what I'm looking for.
    Clues?
    Thanks,
    DW

    DW,
    I have never seen that exact message, but I have seen similar ones.  Generically, the message probably means that you are attempting to perform a transaction against a document (perhaps a Purchase order?) and the Material number (Part Number) contained in the transaction is not the same as the Material number in the originating document in SAP.
    An example might be you have previously created a confirmation against a Purchase order, which now exists in SAP.  This Confirmation is for a specific Purchase order, item, and material.  Now, when you attempt to create an inbound delivery for the Confirmation, the material number contained in the new IDOC is different from the material number that was contained in the original Confirmation.
    I don't know what IDOC Message type you are having the problem with, but generically you can do some troubleshooting. Find the SAP Material number in the IDOC (MATNR probably).  Find the appropriate reference document number in the IDOC (confirmation number?  Purchase order number? or...?), and then manually review the document in SAP to ensure that the Material numbers are the same.
    If you are totally lost, you should really consult with an SAP App expert.  I am guessing that this is part of the Materials Management module, so you would be asking for an MM expert.
    Or, you can send more details, and we can try to help.
    What is the IDOC message type?
    What is the Message number of the error message?  Functionally, what is this IDOC trying to do, from a business perspective?
    Rgds,
    DB49

  • I bought garage band from the app store and downloaded it to my mac mini. When i try to open a screen comes up explaining i need to down load missing files. I do this but when try to open GB again the same thing keeps happening! Can anyone help.

        I bought garage band from the app store and downloaded it to my mac mini. When i try to open a screen comes up explaining i need to down load missing files. I do this but when try to open GB again the same thing keeps happening! Can anyone help.
    Thanks
    Hugh Lockwood

    Hi, Hugo,
    In similar cases it helped to remove the GarageBand "Preferences" file from the User Library.
    Open the folder
        your home folder > Library > Preferences
    and move the file "com.apple.garageband.plist" to the Desktop.
    Then try again to launch GarageBand.
    Regards
    Léonie

  • Two separate enterprise WiFi networks in the same building

    I work in a building that currently has Cisco controller based access points. The access points aren't managed by us and are actually part of another campus. We are given access to them but they don't work quite like we want them to. So we are wanting to bring in our own Cisco WLC 2504 with 3702 APs. But when we brought this up with the main campus they said we can't have two separate enterprise wireless networks in the same building. That their APs will mark our APs as rogues and try to shut them down. There was also mention that they can't share the same channel and that the radios will negotiate with each other to determine how much power they need for coverage. But from what I've read none of that is true. So maybe I misunderstanding something and hoping someone here with more experience can shed some light on this. The only reason we would want to keep their wireless in the building is so when their staff come to our office they can use it. 
    So can two separate WLC/AP systems on different subnets and broadcasting different SSIDs exist in the same building with out causing any issues?

    By default, the WLC code does not try to contain rogue AP's.  Just lots of alarm's and unclassified rogue's.
    In this case you hosts may have actually enabled containment but would have also received a screen full of warning about the public nature of the unlicensed wifi band.
    Here the Superior Court system is side by side with the County system even to the extent that the AP's are next to each other.  Gets fun.  Since each SSID constitutes a rogue, each unit represents a LOT of rogues to report.
    Good Luck

  • When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

    When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Screen in the ipad 2 is not working but not warranty because of scratches in the back?

    I recently bought an Ipad 2 with apple care, suddenly few days ago the screen stopped working. I reset, restored everything with no success.
    After speaking with the customer support over the phone several times (almost 100$ in phone bill!!!) they told me that I could not substitute the product within the due warranty because of some scratches in the back of the devices.
    Although they realized that the scratches have nothing to do with the screen issue, they said that these scratches are categorized as "accidental damages" and therefore the warranty doesn't cover that!
    I tried to explain that I don't care if my Ipad as some scratches and i don't want that to be covered, I only want the screen to be working and this is an obvious problem of manifacturing!
    Bottom line they are now asking 500$ in order to change my 3 weeks old IPAD 2 malfunctioning only because the external part has got some scratches!
    Is this standard?

    Hey Baelt,
    Thanks for the question. I understand that you are experiencing issues with the multi-touch display on your iPad 2. The following resource outlines troubleshooting steps for this symptom:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Restart your device
    Hold the On/Off button until "slider to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
    Thanks,
    Matt M.

  • My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?

    I have a Macbook Pro and it works perfectly fine on my AirPort extreem until I try and put a different computer, ipod, or phone on the wireless. When I try and put more than one device on the network only one device will receive internet access and the other(s) will get a message saying it is because of a shared ip address. Is there a way to change it so they can all share an ip address? Please help me configure my wifi and devices so that I can use more than one device on the wifi at a time.
    Thanks!

    Hmm... Those two screen shot disagree. the first shows that the duplication was on 192.168.1.64, while the second showed you were using 192.168.1.63. That confuses matters further.
    From the screen that you show, click on the "Advanced..." button in the lower right, then the "TCP/IP" tab.
    SHow us a shot of the screen or copy the text from the "Configure IPv4" line and the three under that (IPv4 Address, Subnet Mask, and Router).
    Then launch AirPort Utility.
    If you have one of the old 5.6.x versions:
    * Click on the icon for your Extreme.
    * Click on the "Manual Setup" button and supply the password if needed.
    * Click on the "Internet" icon at the top.
    * Click on the "DHCP" tab.
    * Give us a screen shot or transcribe the results.
    If you have AirPort Utility 6.2 (the latest):
    * Click on the icon for your Extreme.
    * Click on the "Edit" button in the balloon that pops up, supply the password if needed.
    * Click on the "Network" tab.
    * Give us a screen shot or transcribe the results.

  • Would Like to get an iPod but not sure which one would be the best for me..

    i have done some research on the iPods, the easiest to use, which ones are best for fitness workouts, etc. I had an iPod Classic sometime ago but I ruined it because I tried to install the program it came with but it was already installed and the second install I did ruin it. At least this is what the genius bar guy said.
    Anybody who knows iPods fairly well. I am new to my MacBook Pro and I would like to be able to synch the music in iTunes with the iPod for music for various activities. I also have trouble with the ear phones that come with the iPods, so I was looking at a website that had earphones ranging from $300 to $500 approx for people who have various needs in addition to using them at studios while mixing new music. I just want a pair that will stay in my odd shaped ears, have great quality, and work well with the iPods.
    Any recommendations on iPod for exercise. I am not big on videos but having some good music gets me through a hard workout. One problem I have is that the genus guys could not fix the multiple setting, software, preference settings, etc. that had become corrupted in my old Mac and because several genius guys could not fix the numerous problems they gave me a new MacBook Pro. However, they recommended that since my problems were all setting, software issues and problems I have add with adding music in iTunes, that none of my pictures, music or setting be transferred to the new MBP but to start over. They did not even save any of my iTunes and pictures which I thought was odd but what could I say since they were giving me a new MBP. If anybody has a legal way of transferring from my friend;s iTunes the music he has that I can use for the yoga and mind-body classes I teach, which I am getting nervous on because I start the classes next week. I do not have the money to buy the yoga and other fitness music in hours like I use to have. My friend will let me transfer some of his music that he had from his own cds and some but few from iTunes, but that I could get them on myTunes if I could find out how to do that.
    I researched that and since my friend did not care about atwork, artists of the songs on one cd, for example, the genre, tracks, artists, etc. he does have some but I would want to do the research and get the artwork and the titles of the various songs, the tracks, and all the info one gets when they transfer a new cd to iTunes. I had this problem with some of my old music but with google images, and finding the cd online I was able to get all the CDs accurate, even the double CDs that iTunes would have as one cd, but I figured out how to get them to one cd.
    The ways ITunes Help advices on moving songs from one iTunes to another computer with iTunes, they recommend an iPod, transferring them to a DVD and burn the DVd on to my new MacBook Pro, with several other option that were beyond my ability to understand. If anybody has suggestions how to get my friend;s songs to my iTunes so I can have enough New Age and Yoga music for the classes that start next week, I would really appreciate it.
    I also want to start backing up using time Machine and LaCie Rugged hard disk FW, USB, 400 0r 800 FW, 7200 speed, usb, etc. I am not up-to-date on the speed of the LaCie and if the 7200 speed would be a waste of money. Any recommendations for getting this device, not hooking it up to a wireless devise but to the Time Machine. If it does not come formatted for the new MacBook Pro and is it a big deal formatting the hard drive so I would be able to start using it right out of the box. Any suggestions n the iPod, and the LaCie rugged external hard drive would be a hugh help. I cannot afford a Time Capsule right now so I though the LaCie would be the next best thing
    Thanks!!

    i have done some research on the iPods, the easiest to use, which ones are best for fitness workouts, etc. I had an iPod Classic sometime ago but I ruined it because I tried to install the program it came with but it was already installed and the second install I did ruin it. At least this is what the genius bar guy said.
    Anybody who knows iPods fairly well. I am new to my MacBook Pro and I would like to be able to synch the music in iTunes with the iPod for music for various activities. I also have trouble with the ear phones that come with the iPods, so I was looking at a website that had earphones ranging from $300 to $500 approx for people who have various needs in addition to using them at studios while mixing new music. I just want a pair that will stay in my odd shaped ears, have great quality, and work well with the iPods.
    Any recommendations on iPod for exercise. I am not big on videos but having some good music gets me through a hard workout. One problem I have is that the genus guys could not fix the multiple setting, software, preference settings, etc. that had become corrupted in my old Mac and because several genius guys could not fix the numerous problems they gave me a new MacBook Pro. However, they recommended that since my problems were all setting, software issues and problems I have add with adding music in iTunes, that none of my pictures, music or setting be transferred to the new MBP but to start over. They did not even save any of my iTunes and pictures which I thought was odd but what could I say since they were giving me a new MBP. If anybody has a legal way of transferring from my friend;s iTunes the music he has that I can use for the yoga and mind-body classes I teach, which I am getting nervous on because I start the classes next week. I do not have the money to buy the yoga and other fitness music in hours like I use to have. My friend will let me transfer some of his music that he had from his own cds and some but few from iTunes, but that I could get them on myTunes if I could find out how to do that.
    I researched that and since my friend did not care about atwork, artists of the songs on one cd, for example, the genre, tracks, artists, etc. he does have some but I would want to do the research and get the artwork and the titles of the various songs, the tracks, and all the info one gets when they transfer a new cd to iTunes. I had this problem with some of my old music but with google images, and finding the cd online I was able to get all the CDs accurate, even the double CDs that iTunes would have as one cd, but I figured out how to get them to one cd.
    The ways ITunes Help advices on moving songs from one iTunes to another computer with iTunes, they recommend an iPod, transferring them to a DVD and burn the DVd on to my new MacBook Pro, with several other option that were beyond my ability to understand. If anybody has suggestions how to get my friend;s songs to my iTunes so I can have enough New Age and Yoga music for the classes that start next week, I would really appreciate it.
    I also want to start backing up using time Machine and LaCie Rugged hard disk FW, USB, 400 0r 800 FW, 7200 speed, usb, etc. I am not up-to-date on the speed of the LaCie and if the 7200 speed would be a waste of money. Any recommendations for getting this device, not hooking it up to a wireless devise but to the Time Machine. If it does not come formatted for the new MacBook Pro and is it a big deal formatting the hard drive so I would be able to start using it right out of the box. Any suggestions n the iPod, and the LaCie rugged external hard drive would be a hugh help. I cannot afford a Time Capsule right now so I though the LaCie would be the next best thing
    Thanks!!

  • Two Iphones on the same WiFi network, using the same Apple ID receive calls meant for only one of the phones.

    My husband and I each have an IPhone 6.  We are using the same WiFi network and the same Apple ID, the phone numbers are different.  When we are at home, both phone receive calls meant for one of the phones.  Call can be answered from either phone.  Is this a new feature and How can I turn it off?

    go into settings then FaceTime then turn off iPhone cellular calls

  • HT201210 hi i am trying to update my phone and it will not work i have talked to your reps on the phone for hours and have not gotten a solution yet !! after i got off the phone i got error code 3256 !  it will not allow me to update it i have tried over

    hey i am trying to restore my phone as i did once before but the update never worked and i have tried updating my phone bout 12 times now nd i keep getting error codes ! I need elp fixing this so i can get my phone to work as i am having alot of troubles with it and can't seem yp update it thinking the update may help it work can you help me

    What are the exact error codes that are appearing when trying to update?
    Have the steps for troubleshooting those errors as listed in the article from which the question was posted been tried?

  • From mac mail,  I can send but not receive mail. Also, on the same mac, I can run mail through Entourage and no issues with sending or receiving

    only found this problem with mac mail , when new hard drive waqs installed!!
    i CAN SEND from mac mail
    When I first set it up, i could receive mail but not send and now its the other way around
    I cannot receive mail.
    However, under Entourage mail, i have not problems with similar settings!!
    Can you help, this is wrecking my head!!

    What do you see if you invoke Mail's menu option Window > Connection Doctor?

Maybe you are looking for