Workset repeate when I asigned two roles

Hola
I have a problema  I have been created  two roles (Role 1, Role 2)
Role1 will have three tabs:
Nivel 1: Projects Management
Workset: Models
Nivel 1: Portfolio Management
Workset: Portfolio Management, Item Management,Resources Management, Reports and Analitics, Administrator
Nivel 1: Cfolders
Workset:Standares
Role2 will have one tab
Nivel 1: Portfolio Management
Workset:  Item Management
When I assigned one rol to user,  it's working fine,  my problem is  when  these roles are in  only one user in the portfolio Management  in this case  there are  twice the workset Item management.
Is possible when one user  has both  roles , the  workset  doen't repeat???????
Any suggestion  for this
Thanks
Danny
Edited by: Danny Sanchez on Jan 27, 2010 5:32 PM

Hola Danny,
Como estas...You can use the merge id concept here when you are assigning more than 1 role to the user. I guess it is the item management workset which is repeating. Open the workset(/worksets) in the property editor and assign a merge id say 'itemmanagement'(without the quotes) and the two worksets would merge. If the common items within the workset are now showing more than once then use the merge id concepts for those portal objects too. So if the objects are common and shouldnt  appear more than once , then by using the merging they would merge and show up as only 1 object.
Hope it helps,
Prath
que tenga buen dia..
Edited by: prathamesh dalvi on Jan 27, 2010 1:41 PM

Similar Messages

  • Portal Run time error when created a seperate role for Transport package.

    Hi Experts,
    I have created a seperate role for Transport Package(import/export iviews).
    Normally we have transport package functionality in system admin.
    Below steps i followed for creating the new role(trans admin)
    1.Copied SAP provided system admin role to a seperate folder.
    2.Deleted reamining portal objects(like UWL, portal display etc ..) except transport packege workset.
    3.Renamed the role to trans admin.
    I have assigned that role to my self, it is working fine to me when i clcik on export and import.I have super admin role.
    when i assign this role to some portal users, Export is not working.
    when user clicks on Export role they are getting below error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/medium_safety/com.sap.portal.appdesigner.contentcatalog/components/Framework).
    Exception id: 12:10_31/08/09_0031_21763550
    See the details for the exception ID in the log file
    By looking into exception iD also, same error access denied it is showing.
    Please Advice.
    Thanks
    Sony.

    Hi Raghu,
    Thanks for the reply.
    I have given full permissions to all users to this trans admin role before itself.
    Thanks in advance.
    Sony.
    Edited by: ambica sony on Aug 31, 2009 1:53 PM

  • My iphone 4s connects and disconnects (repeatedly) when connected to my computer

    my iphone 4s connects and disconnects (repeatedly) when connected to my computer, it works perfectly fine when connected to regular chargers, everytime i connect it to my computer it shows the charging symbol and then disconnects and reconnects in less then a second, it will repeat this process forever unless disconnected, sometimes it works perfectly fine and most of the times it does the same thing, I know for a fact its not the wire because i recently bought an ipad mini with retina and its usb is new, it worked with the retina for a day or two and then it kept connecting and disconecting repeatedly, my computer is two months old and i have new hardware in that machine, is it a problem in the usb power fluctuation? i am currently using windows 8.1 and i need solutions, this is super annoying, all my other devices work perfectly fine with the usb ports, all my usbs (2.0 and 3.0) do the connecting and disconnecting sometimes it even works ,what is the problem?

    Hello Aqib2024,
    Thank you for providing the details of the issue you are experiencing with your iPhone 4s.  You have taken some really good steps to isolate the issue.  I recommend following the steps in the article below to further isolate and troubleshoot this issue:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When we connect two bw systems to one R/3 system?

    Hi ,
    When we connect two bw systems to one R/3 system,
    could you please exlain what is the imact to SAP and BW in terms of query performance, batch performance,Develoment ,Quality system,security,BW Support.
    Thanks in advance.
    Regards,
    kranthi

    you can connect multiple BW to single R3 source system.
    In the delta queue (RSA7 in source system), you have a field with the target system, so you don´t have problem if you have many target bw system, because the data selection is done by system field.
    Challenge arises when you have multiple R3 feeding to single BW system and then you have to consolidate the master data say 0material fed from different source system R3 then you can consolidate data using consolidated infoobject.
    The following components concatenate to the key of a consolidated InfoObject:
    1)source system ID (two-character source system ID; permitted values are stored NW BI table RSSOURSYSTEM)
    2)one blank character
    3)backend object type (four-character backend object type; permitted values are stored BI table RSBWBEOTYP)
    4)master data key value as stored in the source system
    Note that the key of a consolidated InfoObject solely consists of non-integrated informations from the different source systems. Integration across source systems results from a (maybee repeatedly applied) data consolidation and cleasing process which unveils duplicate master data keys.
    Hope it Helps
    Chetan
    @CP..

  • Merging two roles

    Hi
    I have created two roles under each role i have created one folder and under each role. and i have added to pages under each folder.
    X Role --> New_Folder ---> Page1,Page2.
    Y Role --> New_Folder ---> Page3,Page4.
    How to merge with both roles from New_Folder.  So that New_Folder contains page1,page2, page3, page4.
    Reply ASAP.
    Thanks
    Ravi

    Hi Harini
    I exactly follow the steps which you have specified and the url which you have posted.
    I have created new roles X and Y
    under each roles i have created a folder with name New_Folder.
    under each Folder i have addded two pages
    page1,page2 for RoleX-->New_Folder.
    page3,Page4 for RoleY-->New_Folder.
    i mentioned same merge id sample for both New_Folders.
    and I have made entrypoint for Role X as yes.
    but when i added the above two roles the user, i can able to get only Role X and the pages related role X.
    But i couldn't get pages corresponding to Role Y.
    still any properties should i change
    Thanks
    Ravi

  • PFCG, two roles with the same object but different values

    Hi, Can you help me?
    I need to know if it's possible have two roles like this:
    role A - Object werks = L001 and LIKP-LFART = LF
    role B - Object werks = L005 and LIKP-LFART = ZLF
    If the some user have role A and role B it's possible that he doesn't have authorization for werks = L005 and LIKP-LFART LF?
    Thanks
    Dora

    I guess you made fat figure on the words: "it's possible that he doesn't have authorization for werks = L005 and LIKP-LFART ZLF", right?
    If so, it is impossible.
    When SAP doing the authorization check, it call the function "authority_check", input the Object, the filed and the value to check.
    if some one have role A and B, SAP will check authority both in Role A and Role B.
    What you need to do should be separating the Object into a subrole and assign it separately.
    >
    Jorge Sousa wrote:
    > Hi, Can you help me?
    > I need to know if it's possible have two roles like this:
    > role A - Object werks = L001 and LIKP-LFART = LF
    > role B - Object werks = L005 and LIKP-LFART = ZLF
    > If the some user have role A and role B it's possible that he doesn't have authorization for werks = L005 and LIKP-LFART LF?
    >
    > Thanks
    >
    > Dora

  • The letters on my iPad keep repeating when I use the keyboard

    The letters keep repeating when I use the keyboard

    Welcome to Apple Support Communities.
    Multiple letters result when you 'hold down' a key too long.
    For best results, touch the on-screen 'keyboard' lightly and quickly with your fingertips.
    I find it is easier to type with more accuracy on the larger 'landscape' keyboard, because the keys are spaced better for my fingers. 
    If you are trying to use a compatible iPhone or iPod Touch app, use the 2x button in the lower right corner to enlarge the iPhone keyboard. (But it still won't be the same layout as the iPad.)
    If you've never done much typing, it might help to use a typing tutor app. Several are available in the iTunes App store.
    If you have a lot of text to enter (writing papers, transcribing recordings, writing a novel), you might consider purchasing a compatible wireless keyboard.  In my experience, two different USB keyboards I own do work when plugged into the USB Camera Connection kit, even though the iPad may 'complain' about the keyboard being an unsupported device.
    Message was edited by: kostby

  • How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

    Hi all,
    i am facing problem while generating Test Result word document after successful execution of TestStand.
    The Problem is :
    i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
    Example:
    Page  No. 1
    |     Test case Number  |  Test Step number      |
    |      100                         |            100                   |
    Page  No. 2
    |     Test case Number  |  Test Step number      |
    |      200                         |            300                   |
    Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
    Please through light on this.
    Regards,
    Susa.

    Hi Santiago,
    Thank you very much for your valuable reply.
    i want to generate MS-word report for TestStand after successful testing using MS-word2000.
    Test report contains Actual values, Expected values and Pass/Fail status.
    In my program i have customized all  fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
    To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
    insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header  but it start with  values of above said parameters.
    so i'm not able to repeat table row header for each page.
    Please find the attached file for your reference.
    Attched file expected.doc  :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
    Attached file Actual output from source code.doc   :  This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
    Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
    i think this information is sufficient for you,
    Still if you need some information please ask me.
    Thanks
    Susa.
    Attachments:
    Actual output from source code.doc ‏25 KB
    expected.doc ‏26 KB

  • When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

    When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

    I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
    But then again, in my old version, I can't play two clips at once.  But I figure if the newer FCP allow you to do that, then that's what I would do.

  • Creation of HR master record For a user when a time entry role is added

    Hi,
    Description summary:Automating creation of HR master record For a user when a time entry role is added to a user account
    Description detail:When time entry role is provisioned to a user account,the HR master record is linked,It is compleated after a user is created because a user id must exist .
    It is part of the record.In addition the user must be hired into SAP in order for the HR Master Record to Appear in SAP.
    What we need to do is when a 'Time and Personal Data Maintainer Role "is Added by the VIRSA_ADMIN user,automate the creation of the HR Master Record.
    Transaction code :SU01 to add the role to the Account.
    How to Create the User Exists For this Request…Its very urgent pls help me on this.
    Thanks.
    Vipin

    Why do you need a User Exit? You can create a BDC on PA40 & kick it off upon adding the role..
    ~Suresh

  • MacBook Display - Text Glows or Fades When Scrolling with Two Fingers

    I am currently using an early 2008 MacBook Black, OS X 10.5.5, 2.4GHz Penryn, 4GB RAM (CAS 4), 250 GB HDD. I recently came into an Apple Store for a Genius Bar appointment because of a problem with the screen. When I use two finger scrolling and view text on a white background, the text appears to glow (especially blue text) or fade (black fades to an almost imperceptible gray. This behavior appears in Apple's Safari, Pages, Numbers; as well as, Safari. I have not tested beyond this yet.
    The Genius at the store had no answer for this behavior and the other early 2008 MacBooks in the Apple Store (Walden Galleria, Buffalo, NY 14225) also exhibit this behavior. The Genius admitted this was annoying when viewing text and it appears to be a driver or OS problem because this behavior is also exhibited on the late 2008 MacBooks and MacBook Pros.
    Suggestions?

    It's a characteristic of LCD response time. There is nothing to be done about it except maybe experiment with different colors of text or backgrounds. That's not always practical, I know. Basically, we all have to live with it.

  • Trying to understand problems that occur when redistributing between two OSPF processes

    Hi all, I'm currently brushing up on my OSPF and trying to understand the problems that can occur when redistributing between two OSPF processes. I have read and understand (I think!) the issues caused by the fact that the same route submitted by two different OSPF processes may not necessarily follow the OSPF rules that one would expect - for example, OSPF preferring intra-area routes to inter-area routes to external routes, but only within the same process. So, if the same route is submitted from two different processes, that rule goes out the window.
    But I'm having some difficulty getting my head around the idea of setting the administrative distance lower in one OSPF process to prefer one domain over the other. I just can't quite follow the example described in this document:
    http://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/4170-ospfprocesses.html#twored
    Specifically, in figure 4 where two external networks - external network "N" originating in OSPF domain 1, and external network "M" originating in OSPF domain 2 - are redistributed via two ASBRs. The explanation states:
    This sequence of events could occur occur:
    Router A (Router B) redistributes M into Domain 1, and external M will reach Router B (Router A).
    Because the administrative distance of Domain 1 is lower than Domain 2, Router A (Router B) will install M through Domain 1 and will set to maxage its previous originated LSA (event 1) into Domain 1.
    Because M has been set to maxage in Domain 2, Router A (Router B) will install M though Domain 2 and, therefore, will redistribute M into Domain 2.
    Same as event 1.
    I can't quite work my way through this. I guess it must have something to do with the redistribution of "M" from domain 2 into domain 1 being learned by both ASBRs due to the lower administrative distance assigned to external routes in domain 1, and the original routes through domain 2 being deleted, but then I can't follow the rest of the description. And I can't understand why this would be a problem for network "M" in OSPF domain 2, but NOT for network "N" in OSPF domain 1.
    Any explanation gratefully received!
    Thanks, Graham

    Hello.
    You are right - whenever A and B learns about "M" from Domain 2, they craft LSA for domain 1 and inject it simultaneously. They learn each other's LSAs simultaneously and withdraw (set timer to 3600) for previous LSAs. And it might flap infinitely.
    If they don't learn LSA simultaneously (let's say that A is much faster then B), then there will be no flaps, but B would learn all Domain 2 routes (not just redistributed) via Domain 1.
    And later you will observe routing loop (when you stop advertising M from D): A knows "M" from Domain 2 and injects into Domain 1, B knows from A via Domain 1 and injects into Domain 2... so "M" stays in the routing tables due to mutual redistribution.
    You don't have similar (flap) issue with network "N", because admin distance is lower for Domain 1, so both routers would never prefer OSPF via Domain 2! But having no issue with route flaps, you still will observe routing loop if you stop advertising "N" from C.

  • When I OCR two versions of the same document and then compare th documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago

    When I OCR two versions of the same document and then compare the documents in Acrobat Pro XI, I usually get the message that there are no changes to mark.  However, I know there a quite a few number of changes.  I raised this question more than a year ago, and the response I received had to do with the quality of the OCR and the scans of the documents.  However, if I use Acrobat Pro XI to save the same documents in Word and then run a comparison in Word all of the changes are marked.  When a PDF is saved as a Word document in Acrobat Pro XI, is a different OCR module being used than the one used in Acrobat Pro XI for text recognition?

    OCR is only for recoginition of the image / picture of text provided by an scanner.
    Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image  or picture of text - it is the digital text. So, no OCR involved.
    When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
    When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
    If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
    Once OCR is performed it is the OCR output that is exported.
    OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents". 
    Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
    Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
    Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
    being processed with Acrobat Pro's Compare can certainly be done.
    But - well you've described what can be observed.
    Be well...

  • I bought an ipod in 2006 and used it only for a few days, and i lost it when it fell two times from my hand and it wasn`t working, help me regarding this.

    i bought an ipod in 2006 and used it only for a few days, and i lost it when it fell two times from my hand and it wasn`t working, help me regarding this.
    REGARDS
    RISHABH AULIYA

    Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/
    ipod repair options - https://discussions.apple.com/thread/3900047 and https://discussions.apple.com/message/18867033
    Service Answer Center - iPod - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=ipod  <-- enter correct country once on page.

  • I downloaded IOS 7, but reminders' won't repeat when I set them to. They aren't connected to my icloud or an email account. *** is going on??

    I downloaded IOS 7, but reminders' won't repeat when I set them to. They aren't connected to my icloud or an email account. *** is going on??

    You really shouldn't be using the phone during an update...my thought is that your cables are the root issue. It is possible that because it was in the middle of the imparts and something went wrong it has been "bricked". I'd search the threads for restoring from recovery mode and you might have some luck.

Maybe you are looking for