Worksetmap: more then one level possible?

Hi all,
Does anyone know if there is a possibility to have multiple levels in a worksetmap iView? Or how we can achieve this?
Default you can only go one level deep but this results in some clicks too much for the endusers.
SAP states on help.sap.com: "...Workset Map is the equivalent of a site map...". However the lack of going deeper then one level makes it difficult to accept for endusers.
Already in 2006 this was raised - I hope time brought raad:
Purpose of workset map iView?
Cheers,
Geert

Hi,
unfortunately I don't think much has changed since then. The workset map iView will only display the current (or better one) level. However, you can put worksetmap iViews on every level to accomplish what you are looking for.
I have done this at several customers. It is a lot of one time effort, but than it looks nice.
Regards,
Holger.

Similar Messages

Origin 15 more then one sample (possible?)

Hello Experts
We have a problem with the creation of an additional sample for an existing inspection lot (origin 15).
The process::
1- QPR1 Sample creation
2- QPR5 Inspection lot creation (origin 15)
3- Results recording
4- Now we would like to have the possibility to create an additional sample during the results recording. Its not possible for origin 15!! Why??
For example for origin 89 its possible with the same material, plan, sample drawing etc etc...
Plz help. Any solution welcome!
Yavuz

Inspection 15 is the testing of an existing physical sample. You can't create another sample from within the inspection lot because you would be taking a sample of a sample.
What you have to do is go to QPR1 and create a new sample. Then you pull a sample from that material and test that.
Or you go to QPR5 and create a new inspection lot for existing sample.
FF

Printing salesinvoices, is it possible to do it for more then one invoice?

Is there a method to use VF03 with a selection for more then one sales invoices?
I want to print them as pdf file, so I have to fill in the field billingdocument, but I need it for more then one invoice at the same time.
I tried but it seems not to work. Is it not possible? Or is there another solution to print more then one invoices at the same time?

Hi,
check in the Commnication method of your Output type whether In the NUMBER OF MESSAGES field was maintained as 4
No of messages field will control the Number of invocies to print
check this and revert
thanks
santosh

Is it possible to retrieve report for more then one record at Bi Pub

is it possible to retrieve report for more then one record at a time using BI Publisher on siebel Application

Hi Sudhir,
We have tried this.
I think currently you can query for records you want on UI and run report , then you can see the result set of query in report.
But i think in future releases of BIP the feature to run a report for selected & Multiple Selected records will be provided.
Thanks,
Vamsi

Can catamorphism or anamorphism or other morphism generalize code to combinatorial level from one example or more then one example code

can catamorphism or anamorphism or other morphism generalize code to combinatorial level from one example or more then one example code
if they can not, which methods or algorithm can generalize logic or code to combinatorial level ?
computing nightmare

can catamorphism or anamorphism or other morphism generalize code to combinatorial level from one example or more then one example code
if they can not, which methods or algorithm can generalize logic or code to combinatorial level ?
computing nightmare

Hdiutil and creation of more then one partition in a dmg and sparse image?

Hello,
My main question,
after reading the man page and googling, I can't find any way to create a DMG file with more then one partition. Is this even possible?
My finaly goal is to attach those with -mountRandom and - nobrowse from inside a cocoa.app.
I need the return value to get the random path to those partitions.
hdiutil attach test.dmg -mountrandom /Users/dev/Desktop/testdmg
/dev/disk7 GUIDpartitionscheme
/dev/disk7s1 Apple_HFS /Users/dev/Desktop/testdmg/dmg.A43MrA
But I see that when I use a mutli partition dmg ( here simulated ) I will have to look for one or more random paths, something like this.
hdiutil attach test.dmg -mountrandom /Users/dev/Desktop/testdmg
/dev/disk7 Applepartitionscheme
/dev/disk7s1 Applepartitionmap
/dev/disk7s2 Apple_HFS /Users/dev/Desktop/testdmg/dmg.A43MrA
/dev/disk7s3 Apple_HFS /Users/dev/Desktop/testdmg/dmg.7IaUpK
What is the best way?
to grep a line wich contains '/dmg./ and then awk print $3 ?
path=/Users/dev/Desktop
hdiutil attach $path/test.dmg -mountrandom $path/testdmg | grep '/dmg.' | awk '{ print $3 }'
but what when I attach f.e a sparse image not using the -mountRandom, then I have no '/dmg.' just volumes?
Is that doable in one universal piece of code?

I can only answer your question re:multi partition on a .dmg with:
doug-penningtons-power-mac-g4:Desktop dougp$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *57.3 Gi disk0
1: Applepartitionmap 31.5 Ki disk0s1
2: Apple_Driver43 28.0 Ki disk0s2
3: Apple_Driver43 28.0 Ki disk0s3
4: AppleDriverATA 28.0 Ki disk0s4
5: AppleDriverATA 28.0 Ki disk0s5
6: Apple_FWDriver 256.0 Ki disk0s6
7: AppleDriverIOKit 256.0 Ki disk0s7
8: Apple_Patches 256.0 Ki disk0s8
9: Apple_HFS Joe 57.1 Gi disk0s10
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *10.0 Mi disk1
1: Applepartitionmap 31.5 Ki disk1s1
2: Apple_HFS me 10.0 Mi disk1s2
doug-penningtons-power-mac-g4:Desktop dougp$ diskutil partitionDisk disk1 2 HFS+ leroy 5M HFS+ madge 5M
Started partitioning on disk disk1
Creating partition map
Formatting disk1s2 as Mac OS Extended with name leroy
Formatting disk1s3 as Mac OS Extended with name madge
[ + 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..100% ]
Finished partitioning on disk disk1
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *10.0 Mi disk1
1: Applepartitionmap 31.5 Ki disk1s1
2: Apple_HFS leroy 5.0 Mi disk1s2
3: Apple_HFS madge 5.0 Mi disk1s3
Message was edited by: doug pennington

SAP is allowing miro more then one time against the single GRN

Hi All
Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen.
i want to ristrict his .
can any body tell me the process
Regards
Prakash

Hi,
Option-1:Use T.Code:OMRM & maintain the message M8 -081 as error,Quantities invoiced greater than goods receipt quantity as error [maintain GR-based IV in the PO item level ]
Option-2:Use T.code: OMRM & Maintain the message M8 -087 - Invoice quantity greater than PO quantity [item without GR] as error.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jan 29, 2009 1:59 PM

How to use 'BAPI_GOODSMVT_CREATE' for more then one row selected ???

Hi,
I am using bapi , BAPI_GOODSMVT_CREATE , my requirement is that first perform ALV display with check boxes & then user can selsct any number of rows & then on clicking execute button this bapi is triggered , now my ques is that if i am selecting rows one by one & executing , then am able to post data successfully, but if am selecting more then one row at a time then its giving me error
" exactly one serial no must be selected (instead of more then two / three ) ."
plz help me .
this is how i am filling data in BAPi & bapi call
FORM FILL_BAPIDATA .
wa_GOODSMVT_HEADER-PSTNG_DATE = sy-datum.
wa_GOODSMVT_HEADER-doc_DATE = sy-datum.
wa_goodsmvt_code-gm_code = c_gmcode.
LOOP AT it_final INTO wa_final.
    wa_GOODSMVT_ITEM-MOVE_TYPE = c_movtype.                 " '313'.
    wa_GOODSMVT_ITEM-material = WA_final-MATNR.
    wa_GOODSMVT_ITEM-ENTRY_QNT = wa_final-verme.
    wa_GOODSMVT_ITEM-plant = WA_final-WERKS.               "'DB10'.
    wa_GOODSMVT_ITEM-STGE_LOC = WA_final-LGORT.
    wa_GOODSMVT_ITEM-BATCH = WA_final-CHARG.
wa_GOODSMVT_ITEM-BATCH = l_charg.
    append wa_GOODSMVT_ITEM to IT_GOODSMVT_ITEM.
    clear: wa_GOODSMVT_ITEM.
ENDLOOP.
LOOP AT it_final INTO wa_final.
    wa_serialnumber-SERIALNO = wa_final-sernr.
    APPEND wa_serialnumber to it_serialnumber.
    CLEAR wa_serialnumber.
ENDLOOP.
LOOP AT it_position2 INTO wa_position2.
    wa_serialnumber-MATDOC_ITM = wa_position2-wepos .
    MODIFY it_serialnumber INDEX sy-tabix from wa_serialnumber TRANSPORTING MATDOC_ITM .
ENDLOOP.,
data: begin of mthead.
        include structure bapi2017_gm_head_ret.
data: end of mthead.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      GOODSMVT_HEADER               = wa_GOODSMVT_HEADER
      GOODSMVT_CODE                 = wa_GOODSMVT_CODE
   IMPORTING
      GOODSMVT_HEADRET              = mthead
    MATERIALDOCUMENT              = w_MATERIALDOCUMENT
    MATDOCUMENTYEAR               = w_MATDOCUMENTYEAR
    TABLES
      GOODSMVT_ITEM                 = IT_GOODSMVT_ITEM
      GOODSMVT_SERIALNUMBER         = IT_SERIALNUMBER
      RETURN                        = IT_RETURN
GOODSMVT_SERV_PART_DATA       =
EXTENSIONIN                   =
APPEND w_MATERIALDOCUMENT to it_GOODSMVT1 .
IF sy-subrc = 0 .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*MESSAGE text-016 TYPE 'I'.
PERFORM msg_log .
ENDIF.

Hi,
Did u check the serial numbers table before calling the BAPI. Might be the case tht same serial number is assigned for all items, in this case the goods movement may be possible with same serial number for all items.
Reagrds,
Aditya
Edited by: aditya on Aug 11, 2009 11:46 AM

Dashboards - More than one level deep

Is there a way to create a Dashboards more than one-level deep. Currently I can put a Dashboard within another Dashboard (Getting the flyout menu when I select the top-level dashboard in the Interface). However, what if I want to go one level deeper? So have Dashboard Header show as the link, a flyout menu with Dashboard 1, then another flyout menu off of Dashboard 1 having the link for Dashboard 2.
I saw this tag DashboardMaxBeforeMenu but don't know if this resolves the issue above as I tried to implement and still was not able to set up the above scenario.
Thanks.

Hi Mike,
Sorry for the delay. The whole team has been busy with JavaONE for the past week.
We currently do not support reverse engineering of an operation to a sequence diagram more than one level deep. I opened an enhancement request for you:
http://www.netbeans.org/issues/show_bug.cgi?id=103780
The UML pack is now part of NetBeans. Check out these links for the latest info regarding UML:
http://www.netbeans.org/products/uml/
http://uml.netbeans.org/
Thanks,
George

Select more then one row in value help (multi selecting)

Hi Everybody,
how is it possible to configure a value help, so that the user can choose more then one row?
regards
Sid
Edited by: sid_mopo on Mar 6, 2009 11:54 AM

Hi Lekha,
i have a textedit UI-Field with a value help on it. After clicking on the value help there appears a value help table. At this point the user shold have the possibility to choose/mark more then one row. How can i give the user the possibilty to choose more then one row.
At this time only one row can be selected by a user.
regards,
Sid

How to create a service call for more then one item

Hi All,
How to create a service call for more then one item. i.e. the service call should be logged for more then one item

As you noticed this is not possible by design.
Maybe you could have a dummy item for that purpose and register the real items to be handled in a UDT...
HTH

Can we assign more then one abap system to one bpc server?

Hi my question is short an d simple.
can we assign more then one abap system to one bpc server?
Regards Stefan

Stefan,
My understanding is that this is not possible. However, I believe you can have multiple BPC .NET servers and point them to different dialog instances of the same ABAP system. You would then put a load balancer in front of the .NET servers and requests will be distributed across the ABAP dialog instances.
Ethan

Send messengers from More then one mail account...

Hi
I have more then one mail account in mail - one for private, one for work 1 and one for work 2. I want to avoid that I send a message via the wrong mail account to a person that I don't want to show that I have other mail accounts.
Is it possible to make some kind of rule that says if I send to [email protected] mail will only use mail account 1 and if I would like to send a message to [email protected] it will only use mail account 2?
I hope you understand my question
Best Lars Kudsk

It's not possible to set a rule based on recipient-since rules are only processed on incoming messages or at least those in your inbox..
You can set the default account in Mail preferences, beyond that, you just have to double check to make sure the correct account is selected.

Transformations with more then one source data structure?

Hi,
is there a best practice to include more then one data source (e.g. DSO, InfoSource, ...) in a transformation?
My approach was to merge the needed sources by creating an InfoSet. Afterwords I took this InfoSet as source for the transformation.
Is this the recommended approach? Are there alternatives to this approach? Pros and cons?
Regards,
Axel

Hi,
as I unterstood a virtual characteristic is computed when you query the data. In our case we'd also like to export the data via open hub instead of only querying it, so the value would stay empty. Is this correct? Works a virtual characteristic with a third party analysis tool like Cognos?
So implementing a custom extractor in R/3 would be the recommendation?
Currently I've implemented the scenario via left outer joins in the InfoSet with an additional abap routine in the transformation to determine the right material number. The big downside of this approach is probably bad performance with big tables, that delta extraction isn't possible from an InfoSet and more data as needed for reporting has to be loaded (lookup tables). Right? The only upside I can see with this solution is that after joining the tables only a few if statements are needed in the ABAP-Routine to do the job.

Sync to more then one computer

Hello,
this may sound like a silly question, but I was wondering if you can sync the iPhone to more then one computer.
I have a laptop, and a iMac, both are synced to keep each others content merged and up to date.
I want to get some of the music which is on both locations on my iPhone. in the photos and music areas .
can this be done?

No, not for music. The phone can only be synced to ONE music library, but contacts, calendars, and ohotos can be synced to multiple computers easily (Windows, Mac, or both, doesn't matter).
I think it's possible to copy the files form one of your computers to the other (almost like you would do if you got a new computer and were transfering your music library to the new one) to consolidate your library all on one machine.
-SB

Worksetmap: more then one level possible?

Similar Messages

Maybe you are looking for