Workshop 10.2 for mac os x 10.5
Wouldn't happen to have some lessons learned on installing and running Workshop 10.2 for a mac os x 10.5? I am testing and developing Portlets.
thanks!
Hey sri243,
There were a number of changes in Mac OS 10.7.1 that have made adapting our 488.2 drivers difficult. I can't give any specific information about when the driver will be released but it should be in the coming months. In the mean time there is a fix you can try that involves running OS 10.7 in 32 bit mode which solves some of the issues, but it is not guarenteed to work because 488.2 relies on a protocol that Mac OS 10.7 no longer has called Rosetta . The possible fix can be found in the link below.
http://digital.ni.com/public.nsf/websearch/C6E3E969DD8742E0862578A7007B7105?OpenDocument
Regards,
Eric L.
Applications Engineer
National Instruments
Similar Messages
-
Microsoft Hallmark Greetings Workshop for Mac OS X 10.4.11?
I'm switching from a PC to a Mac and have Microsoft Hallmark Greetings Workshop files that I'd like to keep. (Unix Executable Files or .gwp. Is there any software for Mac that will open and manipulate these files?
Thanks.It doesn't look like it, unless maybe Word or such understands them.
You can run Windows on you Mac though...
Parallels...
http://www.parallels.com/
VmWare Fusion...
http://www.vmware.com/mac
VirtualBox...
http://www.virtualbox.org/wiki/Downloads
And Wine...
http://wiki.winehq.org/MacOSX -
Workshop keep waiting for server's startup
1. just downloaded and installed WebLogic Server and workshop 8.1.
2. created a doamin using workshop
3. created a default app using workingshop
4. start weblogic server from workshop
Although server has been started successfullyk, workshop seems does not know this and keeps waiting. Finally workshop give up and "server stopped" is still displayed in workshop.
I did not have such problem before. anyone can help? thanksAll I have at home is my linksys router.
I loaded Dreamweaver on my Windows XP version on my Mac and
didn't test a Dreamweaver for Mac install yet. -
Opening animated gif in PSE 8 for Mac
I am switching from PSE for PC to PSE 8 for Mac.
I have always been able to open animated gif as layers and work with them, then resave as an updated animated gif.
WIth PSE 8 for Mac, I get a pop up that the file is animated and can only see the top frame. Any ideas on how to open up all of the frames in layers?Do I need to enable this process for my Mac? Maybe I'm missing a plug-in or update?
I have been opening these files from others, tweeking and resaving for almost 2 years in PSE. It definitely will not shuffle the individual panels on an animated gif into the layers box.
My tweeking usually involves adjusting frame speed. Is that what you mean by 'frame rate'?
Thank you for your help. -
How do i add multiple lines in a cell (like a list) in Excel for MAC?
I'm trying to add multiple lines (in the form of a list) in a individual cell in Excel for MAC. I used ALT Enter on my PC but that doesn't work on the iMac. Does anyone know how to do this?
Thanks!It's been a while but I think you hold SHIFT while typing a page break (RETURN) to make a new line without shifting to another cell.
However, as Excel isn't an Apple product, I am sure you will get a faster and more current answer by using Microsoft's Office:Mac forums here:
Office for Mac forums
They are very good. -
Hey everyone,
We released SAV for Mac 9.2.7 to all home users late last week.
This release at a glance:
Compatible with OSX 10.6 - 10.10
Stability and performance improvements
Updated threat engine and threat data (release notes for threat detection engine)
Provides an updated version of OpenSSL
Fixed SophosUIServer.app crashes
Fixed streaming issues from francetv.fr website
How to get the update?
If you're already running SAV, you should have automatically recieved the update courtesy of Sophos AutoUpdate
You can also manually trigger an update by clicking the Sophos sheild tray icon and clicking Update Now
Download a copy from our website
What about OSX 10.11 "El Capitian"?
In the last few weeks I've seen some folks asking about 10.11, which is currently available as a pre-release. At the moment, SAV 9.2.7 *should* work if SAV is already installed before you upgrade, but the install will fail if you attempt to install a fresh copy post-upgrade. That said, we'll be releasing another update for SAV prior to the official release of 10.11 "El Capitain" which will ensure full compatibility, so at the moment we recommend upgrading with caution.
Questions? Feedback on SAV 9.2.7?
Post it here and we'll get back to you ASAP!
in case you didn't see it
https://supportforums.cisco.com/thread/2252436?tstart=0
That should help you out. -
I have nook for mac loaded on my macbook pro. When I try to open a book or magazine nothing happens. I`ve downloaded the nook program twice thinking it was a bad download but to no avail. Any help?
I found the following suggested fix, posted by a user on Barnes & Noble's site:
1. Create a folder in your Applications folder, call it: NOOKforMac
Once you've done this, copy the Nook app to this folder. This should allow the app to run on the 1st or possibly second attempt to launch it.
2. Once you're done using the app always quit it by clicking on the X (red in some cases) button of the application window (upper left hand corner)
This seems to have resolved the issue and my guess is that somehow the .dmg volume path is somewhere hard coded in the app configuration.
Elsewhere in that thread, the administrator advises calling Customer Service Team at 1-800-THE-BOOK (1-800-843-2665) and choose option 2 for Digital Support.
Good luck. -
Want to use my ipod for Mac @ home and PC @ work....
I have a Mac at home and have my ipod set up for the Mac I guess. So I brought the ipod to work today to hook it up to itunes here on my PC, but itunes says only Windows formatted ipods can be used and that I have to do a restore on my ipod to use it.
I thought you could use the ipod on multiple computers? I thought it didn't matter if it was set for Mac or PC because you could still use it on both.
Any help? I want to connect my ipod at work so I can get the music on this computer. Thanks!!Windows computers cannot read the file format the iPods are in when they are formatted for Mac use. However, Macs can read the Fat32 file format that the iPods go in when they are formatted for Windows.
To use the iPod with both computers, you'll have to first restore the iPod on your Windows computer (putting the iPod into Windows format).
The only downside is if there is an iPod software update, you won't be able to install that to the iPod from the Mac, just from Windows computers. -
How to format an external drive for mac AND pc use
i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix -
I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS. -
I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/ -
My PC hard drive died and I have replaced it. Need to import the music on my classic iPod, but get a message that it's synced with another library (old hard drive). How do I import the music onto the new hard drive? Senuti (one respondent's suggestion) is just for macs. I have no old hard drive to copy to the new hard drive (another respondent's suggestion.)
See this older thread from another forum member Zevoneer on different ways to copy music from your iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock -
Any hope for an update for Mac OS 10.6.5 compatibility - Resolved!
Just received the Adobe Photoshop Elements 9 / Premiere Elements 9 bundle and found out the hard way that Premiere Elements 9 is not compatible with my iMac OS 10.6.5. I mistakenly thought that it was. Now what to do? I'm hoping that there is a fix on the near horizon....anyone know?
Thanks,
PattiProblem solved! Okay, I'm relieved but embarrassed...it was a user error. Premiere Elements 9 is compatible with Mac osx 10.6.5 and it was a big oversight on my part in the install process. There are 2 discs for Mac, 2 for Windows versions. The first one contains both PE9 and PEP9 programs, while the second disc contains extra content for Premiere. I had loaded the PE9 and then put the 2nd disc in, thinking I was installing PEP9 program. Because I hadn't finished installing from the first disc (it doesn't automatically take you back to the beginning to get the other program), the data needed for the 2nd disc was absent. So was my mind, apparently! I do think that if there were more detailed install instructions in the booklet, it would have been helpful. However, reading your responses spurred me to on to find the root of the issue...thanks for all your help. My little advice...try not to venture into unknown computer territory when overtired.
-
Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.
Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?
thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again. -
Exporting selected contacts from Outlook 2011 for Mac
I've wanted to easily export a set of selected contacts from Outlook in Microsoft Office for Mac 2011. I've been through many threads about synching to Address Book and then exporting, but I've found a host of troubles, including duplicate copies of contacts being created.
So, I finally broke down and wrote an AppleScript script to export all of the currently selected contacts from Outlook to a file in either vcf (vcard) or csv (comma separated value) format. The best use of this script is to:
-- Install this as a script in Microsoft Outlook by saving the script below to Documents>Microsoft User Data>Outlook Script Menu Items
-- Change to your Contacts in Outlook. Use the Outlook search bar to find the contacts you want to export. You might search by name, category, company, or anything else that identifies the contacts you want to export. Or, you might just leave the view showing all contacts.
-- Select the contacts you want to export
-- Launch the script
The script will have you select between vcard and csv and select a destination file. This hasn't been optimized for speed, so if you're exporting 100's or 1,000's of contacts, be patient. And there isn't a progress bar at present, so you have to wait. It will display an alert when it's complete.
Sorry not to have a download location for you. You'll just have to copy the script text :-). Keep in mind there's been some but limited testing. Read the comments for details. And enjoy.
-- jsc
-- Export Outlook Contacts
-- (c) 2012 J. Scott Carr. The script is made available for free use, with no
-- warranty, under the Creative Commons license agreement.
-- This script has only been tested on Mac OS X 10.6.8 with Micrsoft Outlook for
-- Mac 2011 version 14.1.4.
property byCategory : "By category"
property byPattern : "Names matching pattern"
property vcardFormat : "VCard"
property csvFormat : "CSV"
-- main
set contactsToExport to {}
-- Get the contact selection
set contactsToExport to get_contacts_to_export()
if (count of contactsToExport) is 0 then
display alert "Please select contacts to export and rerun script" as warning
return
end if
-- Shall we export to vcard or CSV?
set theFormat to vcard_or_csv()
if theFormat is "" then
display alert "Error: Must select VCard or CSV format" as warning
return
end if
-- Get and open the output file
set oFile to open_output_file(theFormat)
if (oFile is equal to -128) then
display alert "Canceled"
return
else if (oFile < 0) then
display alert "File open failed (" & oFile & ")" as warning
return
end if
-- Export the contacts
display dialog "About to export " & (count of contactsToExport) & " contacts in " & theFormat & " format. Proceed?"
if button returned of result is not "OK" then
try
close access oFile
end try
return
end if
if theFormat is vcardFormat then
export_to_vcard(contactsToExport, oFile)
else if theFormat is csvFormat then
export_to_csv(contactsToExport, oFile)
else
display alert "Invalid format" as warning
end if
close access oFile
display alert "Complete"
return
-- get_contacts_to_export()
-- We're going to export the Contacts currently selected in Outlook.
-- Check that the current selection is Contacts and not some other Outlook
-- object. Snag the selected Contacts and return them as a list.
-- A side note. When I started this, I built options to enter a matching
-- name string or select a category. And then it hit me that those features
-- are much more robust in Outlook, and it would be easy to just use the
-- current selection.
-- There is some strange behavior that Outlook needs to have recently been
-- the front, active window.
on get_contacts_to_export()
set selectedContacts to {}
tell application "Microsoft Outlook"
set theSelection to selection
if class of theSelection is list then
if class of the first item of theSelection is contact then
copy theSelection to selectedContacts
end if
else
if class of theSelection is contact then
copy theSelection to selectedContacts
end if
end if
return selectedContacts
end tell
end get_contacts_to_export
-- vcard_or_csv()
-- Get the format to use when exporting contacts
on vcard_or_csv()
choose from list {vcardFormat, csvFormat} with prompt "Select export file format:"
if result is false then
return ""
else
return first item of result
end if
end vcard_or_csv
-- open_output_file()
-- Open the destination file for the export, returning the file descriptor or the error number
-- if the operation fails
on open_output_file(exportType)
-- Get the filename, letting "choose file name" deal with existing files.
set theDate to current date
set theTime to time of theDate
if exportType is csvFormat then
set fileName to "contacts.csv"
else
set fileName to "contacts.vcf"
end if
try
set outputFile to choose file name with prompt "Select export destination file" default name fileName
on error errText number errNum
return errNum
end try
-- Open the file
try
-- Open the file as writable and overwrite contents
set oFile to open for access outputFile with write permission
set eof oFile to 0
on error errText number errNum
display alert "Error opening file: " & errNum & return & errText as warning
try
close access oFile
end try
return errNum
end try
return oFile
end open_output_file
-- export_to_vcard()
-- Export each of theContacts to the open file outFile as a set of vcards. Note that the
-- vcard data is from the "vcard data" property of the theContacts. This routine
-- doesn't attempt to reformat an Outlook vcard, nor limit the fields included
-- in the vcard.
on export_to_vcard(theContacts, outFile)
set vcards to {}
tell application "Microsoft Outlook"
repeat with aContact in theContacts
copy vcard data of aContact to the end of vcards
end repeat
end tell
repeat with aCard in vcards
write (aCard & linefeed) to outFile
end repeat
end export_to_vcard
-- export_to_csv()
-- Export each of theContacts to the open file outFile in csv format
on export_to_csv(theContacts, outFile)
set csvFields to {}
-- Get the fields of the contact to export
set csvFields to init_csv()
-- Write the header row
set nFields to count csvFields
write first item of csvFields to outFile
repeat with i from 2 to nFields
write "," & item i of csvFields to outFile
end repeat
write linefeed to outFile
-- Export the fields of the contacts in CSV format, one per line
repeat with aContact in theContacts
write build_csv_line(csvFields, aContact) & linefeed to outFile
end repeat
end export_to_csv
-- init_csv(): defines the fields to export when csv format is selected
-- Each of the fields in the list must match a name used in the routine build_csv_line().
-- The idea is to later create a a pick list so the user can select which contact properties
-- to export.
on init_csv()
set csvFields to {"first name", "last name", "middle name", "title", "nickname", "suffix", "phone", "home phone number", "other home phone number", "home fax number", "business phone number", "other business phone number", "busines fax number", "pager number", "mobile number", "home email", "work email", "other email", "company", "job title", "department", "assistant phone number", "home street address", "home city", "home state", "home country", "home zip", "business street address", "business city", "business state", "business country", "business zip", "home web page", "business web page", "note"}
end init_csv
-- build_csv_line(): format one line for the csv file
-- Parameter csvFields determins which fields to include in the export.
-- Unfortunately I've not figured out how to use perl-style generation of
-- indirect references. If I could, this would have been much more elegant
-- by simply using the field name to refer to a Contact properly.
-- Note that email address are a special case as they're a list of objects in
-- Outlook. So these are handled specially in the export function and can only
-- be selected by the column names "home email", "work email", and "other email".
-- Outlook allows a contact to have more than one of each type of email address
-- but not all contact managers are the same. This script takes the first of
-- each type. So if a contact has more than one "home" email address, you will
-- only be able to export the first to a csv file. Suggest you clean up your
-- addresses in Outlook to adapt. The alternative is to support multiple
-- columns in the csv like "other email 1" and "other email 2", but that's not
-- supported in this version.
-- Another note. In this version, any embedded "return" or "linefeed" characters
-- found in a property of a contact are converted to a space. That means that
-- notes, in particular, will be reformated. That said, this gets arond a problem
-- with embedded carriage returns in address fields that throw off importing
-- the csv file.
-- Also note that at this time IM addresses aren't supported, but it's an easy add
-- following the same logic as email addresses.
on build_csv_line(csvFields, theContact)
set aField to ""
set csvLine to ""
set homeEmail to ""
set workEmail to ""
set otherEmail to ""
tell application "Microsoft Outlook"
set props to get properties of theContact
-- Extract email addresses from address list of contact
set emailAddresses to email addresses of props
repeat with anAddress in emailAddresses
if type of anAddress is home then
set homeEmail to address of anAddress
else if type of anAddress is work then
set workEmail to address of anAddress
else if type of anAddress is other then
set otherEmail to address of anAddress
end if
end repeat
-- Export each desired fields of the contact
repeat with aFieldItem in csvFields
set aField to aFieldItem as text
set aValue to ""
if aField is "first name" then
set aValue to get first name of props
else if aField is "last name" then
set aValue to last name of props
else if aField is "middle name" then
set aValue to middle name of props
else if aField is "display name" then
set aValue to display name of props
else if aField is "title" then
set aValue to title of props
else if aField is "nickname" then
set aValue to nickname of props
else if aField is "suffix" then
set aValue to suffix of props
else if aField is "phone" then
set aValue to phone of props
else if aField is "home phone number" then
set aValue to home phone number of props
else if aField is "other home phone number" then
set aValue to other home phone number of props
else if aField is "home fax number" then
set aValue to home fax number of props
else if aField is "business phone number" then
set aValue to business phone number of props
else if aField is "other bsiness phone number" then
set aValue to other business phone number of props
else if aField is "bsuiness fax number" then
set aValue to business fax number of props
else if aField is "pager number" then
set aValue to pager number of props
else if aField is "mobile number" then
set aValue to mobile number of props
else if aField is "home email" then
set aValue to homeEmail
else if aField is "work email" then
set aValue to workEmail
else if aField is "other email" then
set aValue to otherEmail
else if aField is "office" then
set aValue to office of props
else if aField is "company" then
set aValue to company of props
else if aField is "job title" then
set aValue to job title of props
else if aField is "department" then
set aValue to department of props
else if aField is "assistant phone number" then
set aValue to assistant phone number of props
else if aField is "age" then
set aValue to age of props
else if aField is "anniversary" then
set aValue to anniversary of props
else if aField is "astrololgy sign" then
set aValue to astrology sign of props
else if aField is "birthday" then
set aValue to birthday of props
else if aField is "blood type" then
set aValue to blood type of props
else if aField is "desription" then
set aValue to description of props
else if aField is "home street address" then
set aValue to home street address of props
else if aField is "home city" then
set aValue to home city of props
else if aField is "home state" then
set aValue to home state of props
else if aField is "home country" then
set aValue to home country of props
else if aField is "home zip" then
set aValue to home zip of props
else if aField is "home web page" then
set aValue to home web page of props
else if aField is "business web page" then
set aValue to business web page of props
else if aField is "spouse" then
set aValue to spouse of props
else if aField is "interests" then
set aValue to interests of props
else if aField is "custom field one" then
set aValue to custom field one of props
else if aField is "custom field two" then
set aValue to custom field two of props
else if aField is "custom field three" then
set aValue to custom field three of props
else if aField is "custom field four" then
set aValue to custom field four of props
else if aField is "custom field five" then
set aValue to custom field five of props
else if aField is "custom field six" then
set aValue to custom field six of props
else if aField is "custom field seven" then
set aValue to custom field seven of props
else if aField is "custom field eight" then
set aValue to custom field eight of props
else if aField is "custom phone 1" then
set aValue to custom phone 1 of props
else if aField is "custom phone 2" then
set aValue to custom phone 2 of props
else if aField is "custom phone 3" then
set aValue to custom phone 3 of props
else if aField is "custom phone 4" then
set aValue to custom phone 4 of props
else if aField is "custom date field one" then
set aValue to custom date field one of props
else if aField is "custom date field two" then
set aValue to custom date field two of props
else if aField is "note" then
set aValue to plain text note of props
end if
if aValue is not false then
if length of csvLine > 0 then
set csvLine to csvLine & ","
end if
if (aValue as text) is not "missing value" then
set csvLine to csvLine & "\"" & aValue & "\""
end if
end if
end repeat
end tell
-- Change all embeded "new lines" to spaces. Does mess with the formatting
-- of notes on contacts, but it makes it cleans the file for more reliable
-- importing. This could be changed to an option later.
set csvLine to replace_text(csvLine, return, " ")
set csvLine to replace_text(csvLine, linefeed, " ")
return csvLine
end build_csv_line
-- replace_text()
-- Replace all occurances of searchString with replaceString in sourceStr
on replace_text(sourceStr, searchString, replaceString)
set searchStr to (searchString as text)
set replaceStr to (replaceString as text)
set sourceStr to (sourceStr as text)
set saveDelims to AppleScript's text item delimiters
set AppleScript's text item delimiters to (searchString)
set theList to (every text item of sourceStr)
set AppleScript's text item delimiters to (replaceString)
set theString to theList as string
set AppleScript's text item delimiters to saveDelims
return theString
end replace_textThank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
Maybe you are looking for
-
JLabel components not being displayed on the content Panel in Applet
Hi everyone!! Plz give a solution to the following problem: I have an applet in which i have JPanel component and on that component i am adding a lot of JLabel components but the problem is that the JLabel components are not displayed on the applet u
-
10.4.9 killed photoshop CS2 on my quad!
it opens ok, but when i try and open a file it freezes and never recovers. even after reboots. anyone else having this issue? thanks
-
Hello, im exporting a contextnode to an excel sheet using the ALV component. The problem is that in one field of the context, values with more than one blank between characters occur. For example "abc def". After export to excel the blanks are reduc
-
While doing the activity for "HFM" i got following error . Im doing sample activity, where i need to do changes? how i can rectify this issue ? Im trying to deploy application before that while validating the dimension i got the error Validation Log
-
does anyone have a lens profile for a Nikkor 24 - 85mm 2.8 - 4 D lens or where I can get one?