Workshop 10.3, Axis2 and Databinding (XMLBEANS and JIBX missing)
In Workshop 10.3 (Windows) when I try to generate a Web Service Client (FIle -> New -> WebService Client ) from a WSDL, I see a window where I can choose Databinding from a select box, but there are ONLY "ADB" and "NONE".
Is it possible to choose "XMLBEAN" or "JIBX" somewhere ?
Thanks
Andrea
If you are using Axis, then you are using the wtp WebService tooling. You would need to check the eclipse wtp related forums.
Is this the Web Service Client option under WebLogic WebServices ? In this case you are using the WebLogic WebService stack. This option allows for XMLBeans.
Similar Messages
-
Xmlbean and ws8.1 ant tasks
hi,
i am looking to use xmlbeans to generate stubs for the input arameters and the output returned by the webservice designed using XSD schemas.
I am not planning to use weblogic workshop and will be using only weblogic server 8.1 sp3 server to implement the webservice.
From the weblogic server documentation I observed that using xmlbean is not supported. is that true ?
Please provide a sample of how to integrate xmlbean and weblogic server ant tasks to implement a webservice. The ant task <autotype> generates the types.xml to be included in the wsdl file.. is there is a similar facility in xmlbeans.
TIA
karthik
[[email protected]]Kiran,
Did you happen to get this solution to work?
I'm currently trying to use XMLBeans 2.x to create web services for ws8.1. My thought is that I would need to modify the types.xml to point to the XMLBeans custom serializer/deserializer class? I would then need to run the "wsdl2service" ant task to create the web-services.xml and web service implementation skeleton.
It appears difficult to create weblogic web services outside of Workshop that use XMLBeans! Any advice that you can offer would be appreciated.
-Shawn -
Xmlbeans and ws8.1 ant tasks
hi,
i am looking to use xmlbeans to generate stubs for the input arameters and the output returned by the webservice designed using XSD schemas.
I am not planning to use weblogic workshop and will be using only weblogic server 8.1 sp3 server to implement the webservice.
From the weblogic server documentation I observed that using xmlbean is not supported. is that true ?
Please provide a sample of how to integrate xmlbean and weblogic server ant tasks to implement a webservice. The ant task <autotype> generates the types.xml to be included in the wsdl file.. is there is a similar facility in xmlbeans.
TIA
karthik
[[email protected]]Kiran,
Did you happen to get this solution to work?
I'm currently trying to use XMLBeans 2.x to create web services for ws8.1. My thought is that I would need to modify the types.xml to point to the XMLBeans custom serializer/deserializer class? I would then need to run the "wsdl2service" ant task to create the web-services.xml and web service implementation skeleton.
It appears difficult to create weblogic web services outside of Workshop that use XMLBeans! Any advice that you can offer would be appreciated.
-Shawn -
I have created an xmlbean, and I am storing html code in one of the elements. I am getting inconsistent results when I call the toString() method of the bean, sometimes the html is enclosed in a CDATA tag and sometimes it is not. Is there something that I can do to get consistent results. This is a critical issue for my development
It might be in response to the length of the string (HTML) you are passing. My guess is that strings over a certain length would go as CDATA whereas others would go as Text nodes.
http://www.mail-archive.com/[email protected]/msg00693.html
A (partial) workaround might be here, but I did not read it fully:
http://marc2.theaimsgroup.com/?l=xmlbeans-dev&m=111404481811361&w=2
- Saish -
Can someone from BEA explain the relationship and/or differences between the proposed
Java standard API for XML binding, JAXB, and XMLBeans? Obviously XMLBeans offers
additional APIs, such as cursors and XQuery support (which is neat), but it seems
to be non-standard and BEA-specific.
In this context, are there any clear statements from BEA product marketing how
the technology will be productized? Without that, it seems a bit dangerous to
use...
Thanks,
PMXMLBeans and JAX-B are complementary technologies. JAX-B is a good technology
for loading XML documents into Java objects – in constructing XMLBeans, we have
attempted to be compatible with JAX-B naming conventions. However, JAX-B cannot
necessarily preserve the full fidelity of XML documents, nor does it support 100%
of schema. This is where XMLBeans is complementary - document preservation and
support for extensibility are explicit goals of XMLBeans. Though JAX-B does not
make this possible today, it is conceivable that XMLBeans will be an implementation
of a future JAX-B spec as both technologies may converge together.
Given the above statement, one may ask then why is that preserving full fidelity
of the original XML document may be important? Consider the following advantages:
(1) Sequencing and interleaving information is not lost in XMLBeans. There are
schemas where you care whether <input> comes before <output> or <buy> comes before
<sell> or the other way around. If you just give people a Java .getBuy() and
a .getSell(), they've lost the ability to tell which came first. In XMLBeans,
after the .get you always have the ability to grab an XML cursor on the <buy>
and another one on the <sell> and ask which one came first.
(2) Information that comes into wildcards are not lost in XMLBeans. Consider
the regularly used <xsd:any> and <xsd:anyAttribute> features of schema that allow
any data to appear in the document. With JAX-B, for example, the specification
does not specify how an implementation handle content that it does not know how
to map to a Java representation. But with XMLBeans, you can see where and how
your document has been extended at the wildcards, and change or manipulate the
wildcarded data. Furthermore, something cool is that if you have compiled schemas
for the wildcarded data you can even coerce the wildcards to strongly-typed XMLBeans
and keep on drilling in conveniently. A common use case for this is processing
WSDLs: the w3c schema for WSDL uses wildcards for nearly every interesting piece
of data in a WSDL.
(3) Loading, modifying, and saving an XML document using XMLBeans, you won't lose
all the "other stuff" that human beings don't want to lose on human-readable XML
files, namely comments and all that extra pretty white space between things.
(Unless you want to lose it; XMLBeans can be put in a mode where it is used to
strip extra white space too.)
(4) The architecture is set up so that 100% of schema types can correspond one-to-one
with a Java type. This is perhaps a subtle benefit, but it is powerful because
it means that there are "no regrets" and "no dead-ends" later. You never run
into a schema type that can't be subclassed because of Java problems, or some
extension that has some data that can't be accessed from Java.
I hope this helps shed some light on the complementary relationship between XMLBeans
and JAX-B.
Regards,
Samir
"Peter Meyer" <[email protected]> wrote:
>
Can someone from BEA explain the relationship and/or differences between
the proposed
Java standard API for XML binding, JAXB, and XMLBeans? Obviously XMLBeans
offers
additional APIs, such as cursors and XQuery support (which is neat),
but it seems
to be non-standard and BEA-specific.
In this context, are there any clear statements from BEA product marketing
how
the technology will be productized? Without that, it seems a bit dangerous
to
use...
Thanks,
PM -
What is difference between sy-index and sy-tabix and where both are using ?
what is difference between sy-index and sy-tabix and where both are using ?
hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Customer/Vendor A/C with line item details and with opening and closing Bal
Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balancesHello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah -
Open sales orders and open deliveries and open billing doc to sap from legesy
Dear all
i have some open sales orders and open deliveries and open billing doc are there in the legesy system
so i want to know how to transfer the doc to sap by using lsmw plz tell meHi Amith,
it is always good to search in Google before posting .LSMW is very old topic and i am sure you will get lots of Documents on this .Please go through the below link .you will get some idea on this.
http://scn.sap.com/thread/1012472
there are 14 steps in LSMW and it is same for all (master data and Transaction Data)
Pls practice this in your sand box or quality system before working it in the client requirement.
Hope this helps to you
Regards
Sundar -
I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.
You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.
-
how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?
If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.
-
I am having difficulty XMIT/REC text messages to family members using Android phones? I have a 3GB data plan and all switches and buttons are set properly. Any suggestions?
Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i prevent this from happening again? can someone direct me to some info on multiple phones on one itunes i am lost.
Hey there 79usma79!
I have a couple of articles for you that can help you troubleshoot the issues you are seeing with iTunes on Windows XP. The first is a general troubleshooting article, which can be found right here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
This article can help you find out if there are any conflicts between your copy of Windows XP and iTunes, and can tell you what to do if there are. Before going down the troubleshooting route though, you should take a look at this article, which can help you back up your entire iTunes library to an external hard drive, so if this issue is recurring, you will be able to restore from that backup and will not have to worry about losing your playlists or music again:
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I downloaded my Elements 11 software and resitered it and now it won't open on my computer . . . . do I need to re-install it??
I am working off of Windows 7. My husband restarted the computer and it works fine now. But before you would click on the icon to open the program it would appear as if it were firing up and then just shut down with no message or anything. Not sure but it looks as if it's running ok now! Thanks for responding though!
-
I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.
Maybe you are looking for
-
Can I get IOS 7 on my ipod touch 5g?
I have a brand new ipod touch 5g and i saw that apple relesed ios 7. Can i get it on my Ipod? Please help...
-
OSX 10.6.8 issues with hp photosmart D110
I used to be able to print and scan from my iMac running 10.6.8 to the hp photosmart d110. Now, it doesn't show up as a bonjour device. When I ping it, I get access denied. Still air prints from iPhone and iPad. Works with win 7 machine. Any ideas
-
Sales Analysis Graph accessed from BP Master screen
Hi, can anyone confirm for me what the sales analysis graph numbers are based on when you use the 'chart' button on the BP Master screen? I suspect that the numbers for each month are a total of all purchases the customer has made for that month, reg
-
Whenever I start my computer I get an error message that my fan is not working properly. What Can I do to resolve this problem?
-
Can you change iMessage to not use the enter key to send a message on a macbook pro?
I'm using a mac with OS X Yosemite version 10.10.1 and I'm wondering if you can somehow change the settings of iMessage so that when you press the enter key it doesn't send the message. Thanks if you can help.