Workspace boundary issue in Illustrator CS5 ... should not be one!!!

Hi guys and Girls,
      At my workplace we have upgraded a while ago now to Adobe Suite CS5, which is fantastic and such a powerful tool. The continued problem we are having being in the signage industry is that there is a workspace limit of 5779.55mm x 5779.55mm. my question is can this be removed in any way or if the programmer boffins at Adobe ever read this could you get rid of this by making it limitless.
a lot of signage is a lot bigger than this standard size, and to be quite honest it is not just magazine designers and the like who use Illustrator, we in the design industry like it a great deal as well.
Thank you in advance for any answers, comments or assistance.

uhm.. User to User forum.
No. You can't remove the maximum document size restrictions.

Similar Messages

  • Illustrator Cs5 will not open.  Recently upgraded hard Drive and upgraded to Maverick OS 10.9.3.  Where should I start troubleshooting?

    Illustrator Cs5 will not open.  Recently upgraded hard drive and upgraded to Maverick OS 10.9.3.  Where should I start troubleshooting?

    gj,
    Unless it has worked since the upgrading, I believe you should uninstall, run the Cleaner Tool, and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Adobe Illustrator CS5 does not show PDF thumbnails when browsing

    When I am browsing through PDF files to open one of them in Adobe Illustrator CS5 it does not show the thumbnail.  When I am browsing in Adobe Acrobat it does show the thumbnails.  If I have Adobe Acrobat open and am browsing through files and the thumbnails are showing then if I open Adobe Illustrator and browse for a file the thumbnail does show up. 
    How can I get Illustrator to always show the PDF thumbnails.  I have to frequently browse through thousands of PDF files and it is imperative that I can see the thumbnail for these PDF files.  I primarily use Illustrator to edit PDF files.
    The computer is Windows 7 Enterprise 64 bit edition.  Thumbnails barely work when browsing files through Explorer.  Some thumbnails will show, but not very many of them and it is extremely slow to load the thumbnails that will display.

    Bob,
    So I am assuming you are talking about viewing the files using this method first:
    To use the 32-bit version of Windows Explorer, follow these steps:
    Click Start, click Run, type the following in the Open box, and then click OK:
    Drive_Letter:\windows\syswow64\explorer.exe /separate
    Note The placeholder Drive_Letter represents the drive where the x64-based version of Windows is installed.
    Please let me know if I am missing what you are saying here.

  • Material once issued thru' PM order,Should not be Deleted From The PM Order

    Dear all,
    IN PM ORDER, ONCE MATERIAL IS ISSUED THROUGH IT, SYSTEM ALLOWS TO DELETE MATERIAL. THIS SHOULD NOT
    HAPPEN AS IT WOULD LEAD TO WRONG COST CALCULATION.
    Order Status : gmps,cnf
    can anybody give me solution to restrict the deletion of component in PM Order.
    From
    Vishal

    Hi,
    You cannot control this through Auth.
    You can prevent this by assigning the message type for message  number 750(cn) to "E= Error" through the config for message control.
    Regards
    Narasimhan

  • Issues with Illustrator CS5 Actions

    Hello All,
    I'm trying to create an illustrator action that isn't functioning properly on playback. I'm using Illustrator CS5 on a Macbook. In setting up for print production of CD's and DVD's, on what's called an OMAP; I have to copy, paste and then place the image at a specific point on the artboard. Then I repeat 143 times. I'd like to create an action that pastes and moves each of the 144 disc images to the precise x and y coordinates given. I've tried creating this action through the steps outlined below, but the result of the playback is never consistent and the images end up off the artboard. Any tips or answers are welcome.
    1. Copy disc image from an existing illustrator file.
    2. In the action panel of my OMAP template document I create a new action, give it a name and click Record.
    3. I hit command>V to paste.
    4. In the transform panel I put in the x and y coordinates
    (Then repeat)
    Update: I was able to create the action in Illustrator CS4 and playback works perfect. However, my client uses Illustrator CS 5 on a PC (as  I use most of the time); and, the action will not play back properly in CS 5. I've updated both mine and their software to the latest version of  CS 5 (illustrator 15.0.2 i believe) and this action still will not function right. I've tried re-creating the action in CS 5 with no success on playback. For a demonstration of this, please watch: http://www.youtube.com/watch?v=zo_avyQLAFw&feature=youtu.be. Any advice/solution would be appreciated.

    I think I may have it solved... or perhaps just a workaround. I duplicate the x axis coordinate in the action's playback. Then rearrange the playback to: paste> x axis coordinate> y axis coordinate> x axis coordinate. This seems to be working for some odd reason. Unfortunately, this doesn't work if the x axis is simply put after the y axis: paste>  y axis coordinate> x axis coordinate. The x has to be given before y, then x again: paste> x axis coordinate> y axis coordinate> x axis coordinate = desired result. This is really strange. If anyone has a better solution, please reply. I'll update the actions for my client and see if this works in it's entirety, on windows and mac, and then update this post.

  • With out goods issue for order system should not allow for order confirmati

    Dear all
    with out goods issue system should not allow for order/operation confirmation.
    how it is possible.
    Regrads
    Srinivas

    Dear ,
    In some cases we required to do confirmation or TECO without GI .
    We can change it as per req using user exit
    Regards,
    Ishwar

  • Illustrator CS5 Error - "Not enough memory to save the file"

    Hey guys,
    I'm experiencing difficulties in exporting website from .AI to .PSD using Illustrator CS5.1 under Windows7 Home Premium 64bit. The error message says "Not enough memory to save the file".     
    I can assure you that i've got enough memory for scratch disks and my computer is powerful enough to handle this operation. The funny thing is that i am able to export the very same .Ai file using Illustrator CS5.1 under Windows XP 32bit on different PC.
    I've tried to find a solution online, but it gave no satisfying results so far. So, i think the problem comes from the operating system, but i don't know how to fix it... any suggestions?
    Thanks, Steve.

    Sad to say I'm running into the same problem with a 40KB file.....
    (download the following file and use it)
    http://upload.wikimedia.org/wikipedia/commons/8/8c/2.4_GHz_Wi-Fi_channels_%28802.11b%2Cg_W LAN%29.svg
    File -> Open
    Modify the file slightly:
    doubleclick the image
    remove the channel 14 info  (the text block "14" & "2.484",  the T shaped path, the dotted half circle path)
    drag a square around the "Channel", "Center Frequency", "(GHz)" text blocks and hold left shift and press the left arrow until the selected items are tighter to the rest of the image
    select the bold base line, grab the right middle point to shrink the line (dragging from right to the left) until 'intersect' shows up, then release
    click the top left "Back One Level" arrow 2 times so that you are back to the top level (out of isolation mode)
    File -> Export -> Choose PSD
    Export Options (all default settings)
    Color Model RGB
    Medium (150ppi)
    Write Layers
      Preserve Text Editability
      Maximum Editability
    Antialias
    Click OK.....
    POOF! ERROR!
    "Not enough memory to save the file"
    note: saving as .ai file before exporting doesn't solve the problem
    My Environment:
    Adobe Illustrator 15.0.2
    Win7x64 SP1
    6GB free RAM (8GB installed)
    55GB Free HDD space (256GB total, it's a SSD)
    4GB pagefile
    Please try the test method provided for yourself and advise, thank you

  • Illustrator CS5.5 Not working due to unsupported architecture?

    Currently running OS 10.5.8 on an intel based mac- do I need to upgrade to Lion for this to work? Illustrator CS5.1 Trial worked fine.

    Did you uninstall your trial properly? If something went wron, run the Creative Suite Cleaner Tool. Other than that I could only imagine the licensing system messing up and/or one of the installer components like AIR. Anyway, if you still have the trial package, you can always try and install that, then simply hack in the serial number to turn it into a full product.
    Mylenium

  • Upgraded to Yosemite (10.10.1) my Adobe Illustrator CS5 will not load.

    When I open my CS5 it says "to open 'Adobe Illustrator CS5' you need to install the legacy Java 6 runtime". Don't know what that means or how to find it and I've tried.
    I'm somewhat compter  saviez but this I cannot figure out.
    Please help!

    jl,
    It is here:
    http://support.apple.com/kb/DL1572
    Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
    Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case.
    Apart from that, I believe the right order/way is to update the OS, then reinstall the applications. Was that how you did it?

  • Adobe Illustrator CS5 - Fonts not found

    We are changing our user from a Mac to a Windows (7) based computer and we are running in to issues with files that she created on the Mac version of Adobe Illustrator. She used some fonts (AGaramond-BoldItalic for example) and it works great on the Mac. I copied all the font files to the windows computer and made sure they work (opened Illustrator and created a document with the fonts).
    The issue now is that when we open the old documents from the Mac on the Windows computer it gives an error "Font not found on the system; missing font has been substituted."
    I am not sure how to tell the file that the fonts Are there because when it opens all the fonts are to a default Arial.
    So far I have tried:
    Removing all Adobefnt*.lst files
    Resetting adobe settings by holding ctrl+alt+shift and opening the program
    Testing the file on a brand new user account
    uninstall and reinstall the program
    None of these have worked.

    There are more cache files than the adobefnt files.  See here for more detailed instructions on cleaning your font caches. That said, it sounds likely that the issue is that your fonts are mac only, as Larry said above.  You should be able to use Type -> Find Font... to replace them with whatever version you have on the PC but watch for formatting/flow changes.  Also, my condolences to your designer. ;-)

  • Font looping issue in Illustrator CS5

    My Ilustrator either loops fonts (1 - 10 approx.) or it stop at one font and can't move forward. Photoshop doesnt have this problem. My friend has all the same fonts as me, but his works fine. Once i opened a the original document i created on my coputer, his computer he was subject to this problem. I have no idea what i should do.

    Hi, I'm getting the same issue, but cleaning the font caches hasn't seemed to work.
    It's only illustrator which has this problem, when scrolling font's if it comes to a font it doesn't like (even if these fonts load fine in other programs) it skips down to the bottom of the list and just cycles through them instead.
    (using CS5, on a Windows 7, 64bit HP Laptop)
    thanks,

  • Radial fill gradient issue in Illustrator CS5

    Recently created an illustration with an element — a compound path comprised of hundreds of small squares — filled with a radial gradient.  The image displays properly, prints properly, and exports properly as a PDF.  However, if I close the file and reopen it later, the element is no longer filled (although the fill is retained in the SWATCHES palette.

    I am having the exact same problem. Illustator CS5 file previews correctly, saves to pdf correctly. But, when you close and reopen the Illustrator file, my gradient blend that was on the compound path is gone and the path is black. Gradient fill is still in my pallette and still assigned to another path in the file. Seems to be an issue with the compound path and the gradient fill. Any thoughts?

  • Font issue in Illustrator CS5

    I upgraded to CS5 a little while back and since then I have been having "font" problems. I like to type out a word and then go to the charater pallet and then scroll thru the font list to see how that word will look in diffrent fonts. Well it use to work GREAT and now it's hit or miss (more miss) when it works......now when I'm scrolling down thru them it will all the sudden jump to the bottom of the list where there is about 5 fonts and just scroll thru those but even there it will mix the fonts up un the word (so each letter is potentially a diffrent font).
    Any advise would be greatful!!
    Nick

    Hi, I'm getting the same issue, but cleaning the font caches hasn't seemed to work.
    It's only illustrator which has this problem, when scrolling font's if it comes to a font it doesn't like (even if these fonts load fine in other programs) it skips down to the bottom of the list and just cycles through them instead.
    (using CS5, on a Windows 7, 64bit HP Laptop)
    thanks,

  • Adobe Illustrator CS5 SDK not working with Xcode on Mac OS X Lion 10.7.1

    I recently was interested in developing an illustrator plug-in. I downloaded all the required files listed on the adobe site, including the pdf files.
    I was following the "getting started guide" while working on Xcode 4.1 when I saw that it required a "Carbon Bundle", since there wasn't one. I did my research and found out that I could download the bundle, which would only work on Xcode 3.2. However, when any of the sample files which are Carbon-based are loaded, Xcode 3.2 crashes while Xcode 4.1 notifies me with "Base SDK Missing".
    I would just love to have the sample code running, and I'm pretty sure I can handle it from thereon.
    Thanks in advance!

    I can get it to build on Lion with Xcode 4.1. The steps I went through were to first set all the "Build Settings" > Base SDK to Mac OS X 10.6 like below:
    Then when I built I found it would get stuck on TwirlFilter think there is a problem with Xcode as after force quiting and restarting the computer it was able to compile successfully.
    If you get any LLVM errors like error: extra qualification ... to do with AIPlatformFileDlgOpts then you just have to go to the line with the error and delete AIPlatformFileDlgOpts:: though I think that only happens if you have not done a clean before you built and there are still projects with Base SDKs set as 10.5
    Let me know how you get on,
    Robert

  • Illustrator CS5 will not print full file

    I'm trying to print drawings made in autocad that were modified in illustrator, when I go to print the file ends up stoping halfway through the page. This is infrequent, some times files work and sometimes they don't, aswell often times when files don't print correctly, the title blog will appear at the end of the page.
    Specs:
    Windows 7 64
    Illustrator CS
    Printer:
    Xerox Work centre 7556

    Is Print Tiling on (View > Show Print Tiling)? If not, turn it on. The printable part of the page may not be where you expect it to be.
    --OB

Maybe you are looking for