Workspace Configuration Issue

Hello All,
Some time back I was trying my hand with migrating Hyperion components from one server to another (lets say A to B). In one instance I copied all the configured repositories as it is from A to B. Then I tried configuring the products at B. I realized it was a big mistake and removed everything from B and did a clean migration with correct steps.
I realized, that the first configuration of B has goofed up configuration at A because everything was still pointing to A. I was able to fix everything except Workspace at A. Now, everytime I start Workspace service at B, Workspace at A starts showing me different errors when I launch HF reports: userID/pwd not correct; error at token #xxx; a blank screen after report is executed.
Everything works fine at A as long as the Workspace Agent and Web Application services are stopped at B. None of the other services/components cause any issue.
I guess I might need to redeploy Workspace at A. I tried re-configuring but it did not work. Can anyone please help me with the steps of re-deploying?
OR
Is there any other way to fix the issue?
Version: 11.1.1.3
Env: Windows Server
Thanks!
Nitin

Phew...this is turning out to be a nightmare!
So I dropped the DB and recreated it and then reconfigured. But I guess there was some problem with the deployment. I saw some folders and files missing under the workspace deployed webapp folder.
Then I uninstalled workspace and re-installed it. This time the deployment went fine but I started facing new problems:
1) Essbase service was not starting. Was giving this error "Network Error [10048]: Unable to Bind Host Server Socket On Port [1423]" and was stopping. Following another thread on this forum I renamed the ESSBASE.BAK file to .SEC. This issue was fixed.
2) Cannot register with HSS since it says product already exists.
3) When I login to workspace, it does not show me HFR and some other admin features. I checked the access is fine. This is happening with all users - none of them can see HFR. I have reconfigured workspace 2-3 times but it is not helping.
4) I cannot login to HFR Studio. It says you do not have previlige.
Is it step 1 which screwed up everything else?
Any word of advise please?!
Thanks.

Similar Messages

BPM WorkSpace login issue

Hello
I was trying to login to my BPM Console: http://localhost:8001/bpm/workspace/faces/loginPage.jspx
After logging in the page looks blank, does not show up any info in the page.
Following is the log that has got reflected @ Weblogic level:
Any issue with WIN7 OS on this.
log:
<24 Jan, 2013 2:20:35 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com
.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DOracleBPMWorkspac
e%2CType%3DAppDeployment%22%29.>
<24 Jan, 2013 2:21:54 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=AppControlPages.>
Please help me out
Regards
Raj
When Searched in Oracle Support Here is the information that they specified. But This is also not working.
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.lookupUser(AbstractIdentityServiceClient.java:195)Cannot log in to workspace( BPM 11g).
Fix
One of the reasons this issue might happen is when the application (in this case the Workspace) was not able to connect to the Identity services.
And the cause of bug was network configuration issues which prevented connection to IdentityService SOAP endpoint using the configured server hostname.
So to overcome this issue, set the ServerURL property in the soa-infra config mBean to http://127.0.0.1
This should resolve the issue.
An alternative option is to use any other valid server IP address / port.
In future the bug fix will have log messages which will post warnings in the logs if the host name used in the URL is not resolved.
How to set the MBean:
1. Login to the em console
2. Right click on soa-infra
3. Goto Administration ->SystemMBean Browser
4. Goto Application Defined MBeans
5. Find Oracle.as.soainfra.config ->Expand "Server: <your server name>"
6. Goto SoaInfraConfig -> click on soa-infra
7. Find the Property ServerURL, enter value as http://127.0.0.1
8. Click on Apply
References
BUG:9815699 - BPM 11G:NOT ABLE TO LOGIN TO WORKSPACE
Edited by: rajMS on Jan 24, 2013 4:18 PM

This is related to the authentication providers you have configured in WebLogic. Check that the providers are configured property for whatever identity store you need to use - integrated WebLogic, OID, AD, etc. - and that they are in the correct order.

EPM 11.1.1.2 Configuration issue

Hello All,
I am trying to configure EPM 11.1.1.2 on my laptop and failed at the below step. Can anyone please help if they have faced a similar issue. Please let me know if you would like me to provide any logs that would help resolve this. TIA.
---- Product Configuration Summary.....
( Jun 10, 2009 11:02:12 PM ): ---- Hyperion Foundation Configuration......
( Jun 10, 2009 11:02:22 PM ): Configure Database :: pass
( Jun 10, 2009 11:02:22 PM ): Common Settings :: pass
( Jun 10, 2009 11:04:06 PM ): Deploy to Application Server :: pass
( Jun 10, 2009 11:04:45 PM ): ---- Performance Management Architect Configuration......
( Jun 10, 2009 11:04:56 PM ): Register with Shared Services :: fail
( Jun 10, 2009 11:05:07 PM ): Configure Database :: pass
( Jun 10, 2009 11:13:15 PM ): Deploy to Application Server :: pass
( Jun 10, 2009 11:13:23 PM ): Interface Datasource Configuration :: fail
( Jun 10, 2009 11:13:25 PM ): ---- Studio Configuration......
( Jun 10, 2009 11:13:34 PM ): Register with Shared Services :: fail
( Jun 10, 2009 11:13:41 PM ): Configure Database :: pass
( Jun 10, 2009 11:13:41 PM ): ---- Calculation Manager Configuration......
( Jun 10, 2009 11:13:49 PM ): Register with Shared Services :: fail
( Jun 10, 2009 11:13:53 PM ): Configure Database :: pass
( Jun 10, 2009 11:14:40 PM ): Deploy to Application Server :: pass
( Jun 10, 2009 11:14:41 PM ): ---- Essbase Administration Services Configuration......
( Jun 10, 2009 11:14:45 PM ): Configure Database :: pass
( Jun 10, 2009 11:14:53 PM ): Register with Shared Services :: fail
( Jun 10, 2009 11:15:35 PM ): Deploy to Application Server :: pass
( Jun 10, 2009 11:15:35 PM ): ---- Essbase Configuration......
( Jun 10, 2009 11:15:43 PM ): Essbase Custom Configuration :: pass
( Jun 10, 2009 11:15:44 PM ): ---- Planning Configuration......
( Jun 10, 2009 11:15:53 PM ): Register with Shared Services :: fail
( Jun 10, 2009 11:22:14 PM ): Configure Database :: pass
( Jun 10, 2009 11:23:04 PM ): Deploy to Application Server :: pass
( Jun 10, 2009 11:23:05 PM ): ---- Smart Search Configuration......
( Jun 10, 2009 11:23:21 PM ): Deploy to Application Server :: pass
( Jun 10, 2009 11:23:22 PM ): ---- Workspace Configuration......
( Jun 10, 2009 11:23:31 PM ): Register with Shared Services :: fail
( Jun 10, 2009 11:24:46 PM ): Configure Database :: pass
( Jun 10, 2009 11:26:42 PM ): Deploy to Application Server :: pass
( Jun 10, 2009 11:26:48 PM ): Configure Web Server :: pass
Edited by: user10992336 on Jun 11, 2009 5:33 PM

Below are a couple of lines from the configtool log file. Please help.
(Jun 10, 2009, 11:40:41 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardState, DEBUG, Workspace DB string = FOUNDATION_SERVICES_PRODUCT/WORKSPACE/DATABASE_CONN
(Jun 10, 2009, 11:40:41 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardState, DEBUG, FOUNDATION_SERVICES_PRODUCT/WORKSPACE/DATABASE_CONN is present, trying to get old repository location
(Jun 10, 2009, 11:40:41 PM), com.oracle.cmc.registry.HITRegistryUtil, DEBUG, HITRegistryUtil instance returned.
(Jun 10, 2009, 11:40:41 PM), com.oracle.cmc.registry.HITRegistryUtil, DEBUG, Getting CMC setup parameters.
(Jun 10, 2009, 11:40:41 PM), com.oracle.cmc.registry.HITRegistryUtil, DEBUG, Parameters:ExistingBIPlusHomes:null|isConfigIR:false|isConfigWorkspace:false|isConfigWorkspaceAppServer:false|isUpgrade:false|RepositoryLocation:C:\Hyperion_EPM11\products\Foundation\workspace\data\RM1_desktop.workgroup.com|ServerXMLLocation:null|AgentPort:6860|RMIPort:6860|IRPortRange:6810-6817|IRBIPortRange:6812,6813|IRDASPortRange:6814,6815|IRJobPortRange:6816,6817|IRCSPortRange:null|IRLogginPortRange:6810,6811|WorkspacePortRange:6800-6805|SQRConnectString:null
(Jun 10, 2009, 11:40:41 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardState, DEBUG, Returned repository location is C:\Hyperion_EPM11\products\Foundation\workspace\data\RM1_desktop.workgroup.com
(Jun 10, 2009, 11:40:41 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardState, DEBUG, Repository location is C:\Hyperion_EPM11\products\Foundation\workspace\data\RM1_desktop.workgroup.com
(Jun 10, 2009, 11:40:41 PM), com.oracle.cmc.registry.HITRegistryUtil, DEBUG, HITRegistryUtil instance returned.
(Jun 10, 2009, 11:40:41 PM), com.oracle.cmc.registry.HITRegistryUtil, DEBUG, Getting CMC setup parameters.
(Jun 10, 2009, 11:40:41 PM), com.oracle.cmc.registry.HITRegistryUtil, DEBUG, Parameters:ExistingBIPlusHomes:null|isConfigIR:false|isConfigWorkspace:false|isConfigWorkspaceAppServer:false|isUpgrade:false|RepositoryLocation:C:\Hyperion_EPM11\products\Foundation\workspace\data\RM1_desktop.workgroup.com|ServerXMLLocation:null|AgentPort:6860|RMIPort:6860|IRPortRange:6810-6817|IRBIPortRange:6812,6813|IRDASPortRange:6814,6815|IRJobPortRange:6816,6817|IRCSPortRange:null|IRLogginPortRange:6810,6811|WorkspacePortRange:6800-6805|SQRConnectString:null
(Jun 10, 2009, 11:40:41 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardState, DEBUG, Workspace port range is 6800-6805
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, Here is panel validation logic
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, repositoryLocation is: C:\Hyperion_EPM11\products\Foundation\workspace\data\RM1_desktop.workgroup.com
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, repositoryLocationParent is not null
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, is first config
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, repositroy root does exist
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6800 is NOT avalible
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6801 is NOT avalible
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6802 is NOT avalible
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6803 is NOT avalible
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6804 is NOT avalible
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6805 is NOT avalible
(Jun 10, 2009, 11:40:44 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, Avalible ports number: 0
(Jun 10, 2009, 11:40:44 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Not enough available ports in range, invalid port number, or format error
(Jun 10, 2009, 11:40:59 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, Here is panel validation logic
(Jun 10, 2009, 11:40:59 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, repositoryLocation is: C:\Hyperion_EPM11\products\Foundation\workspace\data\RM1_desktop.workgroup.com
(Jun 10, 2009, 11:40:59 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, repositoryLocationParent is not null
(Jun 10, 2009, 11:40:59 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, is first config
(Jun 10, 2009, 11:40:59 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, repositroy root does exist
(Jun 10, 2009, 11:41:00 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6900 is avalible
(Jun 10, 2009, 11:41:01 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6901 is avalible
(Jun 10, 2009, 11:41:02 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6902 is avalible
(Jun 10, 2009, 11:41:03 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6903 is avalible
(Jun 10, 2009, 11:41:04 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6904 is avalible
(Jun 10, 2009, 11:41:05 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, localhost:6905 is avalible
(Jun 10, 2009, 11:41:05 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule, DEBUG, Avalible ports number: 6
(Jun 10, 2009, 11:41:05 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule$1, DEBUG, Here is commit logic
(Jun 10, 2009, 11:41:05 PM), com.hyperion.avalanche.config.WorkspaceServiceConfiguratorWizardRule$1, DEBUG, Storing custom WS configuration
(Jun 10, 2009, 11:41:05 PM), com.hyperion.cis.config.wizard.ProductCustomInputPanel, DEBUG, managerClassName: com.hyperion.awb.config.HSSInfoPanel
(Jun 10, 2009, 11:41:05 PM), com.hyperion.awb.config.HSSInfoPanel, DEBUG, The panel should not show with Registry available
(Jun 10, 2009, 11:41:05 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
(Jun 10, 2009, 11:41:05 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5; deployment type = auto
(Jun 10, 2009, 11:41:05 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Oracle 10g; deployment type = both
(Jun 10, 2009, 11:41:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
(Jun 10, 2009, 11:41:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: Tomcat 5
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, serverLocation:
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [0]: Shared Services
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [1]: CALC
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [2]: EPMADataSynchronizer
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [3]: EPMAWebTier
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [4]: Workspace
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [5]: eas
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [6]: SmartSearch
(Jun 10, 2009, 11:41:22 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [7]: Planning
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, serverLocation:
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [0]: Shared Services
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [1]: CALC
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [2]: EPMADataSynchronizer
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [3]: EPMAWebTier
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [4]: Workspace
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [5]: eas
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [6]: SmartSearch
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [7]: Planning
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Server Name: HyperionPlanning
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Listen Port: 8300
(Jun 10, 2009, 11:41:33 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, port in use error
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, serverLocation:
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [0]: Shared Services
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [1]: CALC
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [2]: EPMADataSynchronizer
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [3]: EPMAWebTier
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [4]: Workspace
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [5]: eas
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [6]: SmartSearch
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Deploy component [7]: Planning
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Server Name: HyperionPlanning
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, Listen Port: 8301
(Jun 10, 2009, 11:41:40 PM), com.hyperion.cis.config.wizard.AppServerDeploymentPanel, DEBUG, port in use error
(Jun 10, 2009, 11:41:47 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
(Jun 10, 2009, 11:41:47 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5; deployment type = auto
(Jun 10, 2009, 11:41:47 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Oracle 10g; deployment type = both
(Jun 10, 2009, 11:54:24 PM), com.hyperion.install.util.MappingTreeHelper, DEBUG, Getting resource: mappingTree.xml
(Jun 10, 2009, 11:54:24 PM), com.hyperion.install.sw.SoftwareRegistry, DEBUG, Adding Hyperion Home entry...
(Jun 10, 2009, 11:54:24 PM), com.hyperion.install.sw.SoftwareRegistry, DEBUG, Creating set Hyperion Home script: C:\Documents and Settings\Dharmesh\set_hyphome_1.bat
(Jun 10, 2009, 11:54:24 PM), com.hyperion.install.sw.SoftwareRegistry, DEBUG, Adding Hyperion Home entry...
(Jun 10, 2009, 11:54:24 PM), com.hyperion.install.sw.SoftwareRegistry, DEBUG, Creating set Hyperion Home script: C:\Documents and Settings\Dharmesh\set_hyphome_1.bat
(Jun 10, 2009, 11:54:24 PM), sun.reflect.NativeMethodAccessorImpl, INFO, Selected locale: en_US

OC4J Configuration issue. when trying to enable OEM on 10g

Good Morning to all ;
Just now i posted question related to OEM (when getting error).
I can't connect my OEM with any user
Here i created DB using DBCA with OEM but i couldn't login via BROWSER ...
Please ignore this question here .. ( Not a Duplicate Question)
This question is different , but related to OEM ( Ok . I am explaining my issues here. I created Database using DBCA without enabling OEM.
then i set ORACLE_SID and tried to execute OEM but getting error.
$ emctl start dbconsole
TZ set to Asia/Calcutta
OC4J Configuration issue. /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_linuxserver_orcltest not found.
NOTE : I want to know answer for 2nd question. what is OC4J Configuration issue. - How can i resolve that ? or
Thanks in advance ..

Hello Sb
I perfectly upgraded my DB with OEM to 10.2.0.4.0 on OEL4. i'm going to do on rhel-5
*$ export ORACLE_SID=orcl*
[oracle@oel ~]$ sqlplus /nolog
SQLPlus: Release 10.2.0.4.0 - Production on Sun Apr 21 00:59:53 2013*
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> conn /as sysdba
Connected.
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> cl scr
SQL> select comp_name , version , status from dba_registry;
COMP_NAME
VERSION STATUS
Oracle Database Catalog Views
10.2.0.4.0 VALID
Oracle Database Packages and Types
10.2.0.4.0 VALID
Oracle Workspace Manager
10.2.0.4.3 VALID
COMP_NAME
VERSION STATUS
JServer JAVA Virtual Machine
10.2.0.4.0 VALID
Oracle XDK
10.2.0.4.0 VALID
Oracle Database Java Packages
10.2.0.4.0 VALID
COMP_NAME
VERSION STATUS
Oracle Expression Filter
10.2.0.4.0 VALID
Oracle Data Mining
10.2.0.4.0 VALID
Oracle Text
10.2.0.4.0 VALID
COMP_NAME
VERSION STATUS
Oracle XML Database
10.2.0.4.0 VALID
Oracle Rule Manager
10.2.0.4.0 VALID
Oracle interMedia
10.2.0.4.0 VALID
COMP_NAME
VERSION STATUS
OLAP Analytic Workspace
10.2.0.4.0 VALID
Oracle OLAP API
10.2.0.4.0 VALID
OLAP Catalog
10.2.0.4.0 VALID
COMP_NAME
VERSION STATUS
Spatial
10.2.0.4.0 VALID
Oracle Enterprise Manager
10.2.0.4.0 VALID
17 rows selected.
Thanks ..

Configuration Issue in User Mapping ..

Hi,
Pls help resolve this issue..
When i go to " UserMapping " option using the "Personalize " link , i get the following error msg..
"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
Also , if i go thru "User Administration -> User Mapping "
then it says,
--"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system .
Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
I am not able to solve this problem..Pls help
Thanks in advance

Hi Venkat,
Here the quick and dirty solution:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
I would rather recommend to install the unlimited strength jurisdiction policy files.
For more info on this, check this thread:
JCE Jurisdiction does not allow Portal to start
Hope this helps,
Robert

Configuration issue of syslog.conf

Dear All,
My client is facing a configuration issue of syslog.conf.
They have set a cacti on a Linux server for monitoring of all servers snmp & syslog.
The part of snmp has set up successfully but cannot send the syslog to the cacti.
My client want the syslog can keep on the localhost and send to cacti for monitoring
we have tried to do the following things for make it work:
Insert the information (*.* @10.251.99.74) in /etc/syslog.conf
Restart service of system-log
Deleted all word of loghost in the /etc/hosts file
But still not work. Anyone can give me suggestion or idea about this?

Thank you for your reply.
It is tab. But I think the problem is solaris cannot use *.* to represent all logs.
I have used the following is work
*.err;ker.debug;daemon.notice;mail.crit @10.251.99.74
If that is not the mail reason, please put me right.

Anti-relay filter configuration issues

Configuration issues with the anti-relay filter in Messaging Server 4.1x.
The following information addresses common questions about configuration issues
with the anti-relay filter in Messaging Server 4.1x: 

<OL>
<LI>Question: 
What is the difference between the delivery
and submission
options? 

Answer: 
The submission option
allows specified users to send email to any email address in the world.
These users are typically internal users.

The delivery option
allows specified users to receive email from anybody. These users
are also typically internal users.

A standard filter will appear something as follows: 

# This is the anti-relay config file written by Jay at iPlanet
# The first section sets default conditions
resolvehostnames:0
useauthinfo:0
advertiseauthinfo:1
# This section sets domains to be delivered to by anybody
delivery:*@my.domain.com
# This section sets domains that can send any place
submission:129.12.4.*


<LI>Question: 
The delivery
option works properly. However, why doesn't the
submission option
appear to be allowing emails from specified users to pass through?

Answer: 
The problem with the submission behavior could be due to the setting of the
the resolvehostnames
parameter. If this parameter is turned on
(resolvehostnames:1),
then all entries in this configuration file must be fully qualified
host names. Although wildcards will work, you cannot specify IP
addresses with this configuration setting.


<LI>Question: 
Is it possible to allow people outside of my network to connect to the server
and send mail out?

Answer: 
Yes. To allow outside users to connect to the server and send mail
to any address, without granting the same privilege to the rest of the world,
activate the authenticated SMTP portion of the filter via the
useauthinfo option.
Setting this parameter to "1" (i.e., useauthinfo:1
) will require a user who is not in a
submission address and who is attempting to send email to an address not in
the delivery range to authenticate with a user ID and password.
</OL>

For additional information on the anti-relay filter, please refer to the
Messaging Server 4.1 Administrator's Guide at 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677

Prashant:
Are you using a UBE filter to configure domain-based anti-relayinging? We had better luck with the anti-relay plug-in. There is some info on this (for 4.15) at
http://docs.sun.com/source/816-6044-10/ubefiltr.htm#1069973
You have to enable the plug-in using configutil, per the above. The anti-relay plug-in is controlled by antirelay.conf. Be aware that the pattern matching rules are very limited, and not well documented. Fortunately, the source code to the plug-in is included, and you can see what it is doing. To pass the tests we had to add a hard-coded test for a "%" in the source and recompile:
*** antirelay.c.orig Thu Oct 31 04:42:13 2002
--- antirelay.c Thu Oct 31 04:22:07 2002
*** 934,939 ****
--- 934,940 ----
* Weight must be non-zero to begin with so that matches on just "*"
* will work.
+ if( strchr(text,'%') != NULL ) return ABORT;
weight = TRUE;
for ( ; *p; text++, p++) {
if (*text == '\0' && p != '')
Not a really elegant hack, but we didn't need a fully functional regex engine.

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
=============================================
Hi All,
I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
The heirarchy in which reports try to look for the REPORTS_PATH is
1) REPORTS.sh
2) rwserver.conf
3) Settings as per Oracle Enterprise Manager Configuration Settings.
My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
REP-51019: System user authentication is missing.
** the Singlesignon in rwservlet.properties is defined as no
But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
(which shows the report just run).
Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
Pls. feel free to ask me questions related to the environment set up.
Thanks

Your question belongs in {forum:id=84}
John

Profit cebter and copany code configuration issue

i am making one sales order in which the item number level when i put profit center GB03100004 earlier i was getting company
code in profit segment as GB03, but now i am getting as GB01.
is this related to any configuration issue, please let me know.

Hi,
Goto the T.Code KE53.
Enter the Controlling area.
Enter the profit centre.
Click on Company Codes.
Check for which company code the field "Assigned" is ticked.
Please check with your FICO consultant for more information and modifications.
Regards,
Krishna.

EM Configuration issue.

I have installed grid agent on different server. When i ran emctl status agent i am getting below error.
EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL.
OS is AIX
Thanks in advance...

I am in AGENT_HOME.You are under Agent installation that's one thing. You also need to make sure your environment variable ORACLE_HOME point to AGENT_HOME not the database installation.

OC4J Configuration issue

Hi,
I tried to put my database in Archivelog mode through EM , at the time of restarting the database it didnt start... instance is starting but database is not opening....
I tried this command but its giving error... ( I am running 10g r2 , on RHEL 5 which is install on Oracle virtual toolbox )
emctl start dbconsole
OC4J Configuration issue. /opt/oracle/oraclehome_112/db_1/oc4j/j2ee/OC4J_DBConsole_myhostname_orcl not found.
where orcl is the instance name.
and this directory, OC4J_DBConsole_myhostname_orcl, does not exist on the file system.
In some article I read ... the solution I tried to type...
http://kamranagayev.com/2011/03/21/step-by-step-installing-oracle11g-on-linux/
Feedback no. 19
./emca -deconfig dbcontrol db -repos drop
bash : ./emca : No Such file or Directory
./emca -config dbcontrol db -repos create
Thanks and regards...

Hello;
I'm thinking this step was either missed of you have a typo :
Change the entry of .bash_profile file of the oracle user and add following lines:
vi /home/oracle/.bash_profile
export ORACLE_HOME=/u01/home/oracle/product/11.2.0/db_1
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:$PATHIf your ORACLE_HOME is set it should find the "emca".
You can test by running these export commands at the Linux prompt.
The which command is your friend
which emca
/u01/app/oracle/product/11.2.0.2/bin/emcaBest Regards
mseberg
Edited by: mseberg on Feb 29, 2012 2:52 PM

InDesign CS5 ME - Workspace/Toolbars issue

hi all
i bought new computer with win 7 ultimate 64 bit
and i try to install indesign cs5 middle east (ME) and after i finnish it i get : Window -> Workspace" dropdown there are no available Workspaces to choose from
The Workspace settings are set to "untitled" and, while you can manually set them back to normal, upon reloading InDesign 5, it has reset and you are back to no toolbars.
and i dont get :
For example, Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? .... etc are not there, only the options to "Reset Untitled" and "New Workspace...".
in my old computer and in my leptop i dont have this problem
do you have any solution for me.
thanks
hanan

Ok sure,
When loading up InDesign CS5 (v7.0.2) on either a Dell XPS 720, or a Dell Precision T3400, the toolbars don't appear. The Workspace settings are set to "untitled" and, while you can manually set them back to normal, upon reloading InDesign 5, it has reset and you are back to no toolbars.
After some troubleshooting, under the "Window -> Workspace" dropdown there are no available Workspaces to choose from. For example, .... etc are not there, only the options to "Reset Untitled" and "New Workspace..."
It seems as though the program is having trouble loading the Workspace defaults into CS5 ID...
However, when you run the program as either a local admin or set the compatibility to Windows 2000, it loads up just fine, toolbars/workspaces and all.
Hope this clarifies the situation, again thanks for your help thus far.
Adam

Lync 2013 to Exchange 2013 Oauth problem - Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer

Hi,
I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
I have read and following the instructions online and cannot see what I am doing wrong.
On the Exchange 2013 server, I get the following error when I run:
Test-OAuthConnectivity -Service EWS -TargetUri
https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
Task : Checking EWS API Call Under Oauth
Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
ago.
The token cache is being cleared because "use cached token" was set to false.
Exchange Outbound Oauth Log:
Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
Information:[OAuthCredentials:Authenticate] entering
Information:[OAuthCredentials:Authenticate] challenge from
'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
client_id="00000002-0000-0ff1-ce00-000000000000",
trusted_issuers="[email protected]",Negotiate,NTLM
Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
trusted_issuer: '[email protected]'
Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
[email protected]
Error:The trusted issuers contained the following entries
'[email protected]'. None of them are configured locally.
Exchange Response Details:
HTTP response message:
Exception:
System.Net.WebException: The request was aborted: The request was canceled. --->
Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
following entries '[email protected]'. None of them are
configured locally.
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain)
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain, ClaimProvider claimProvider)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
HttpAuthenticationChallenge challengeObject)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
webRequest, Boolean preAuthenticate)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
challenge, WebRequest request, ICredentials credentials)
at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
credentials)
at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
authInfo)
at System.Net.HttpWebRequest.CheckResubmitForAuth()
at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
at System.Net.HttpWebRequest.ProcessResponse()
at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
Boolean reloadConfig)
ResultType : Error
Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
IsValid : True
ObjectState : New
It appears to work fine from Lync 2013 to Exchange 2013.
When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
VERBOSE: Successfully opened a connection to storage service at localhost using
binding: NetNamedPipe.
VERBOSE: Create message.
VERBOSE: Execute Exchange Storage Command.
VERBOSE: Processing web storage response for ExCreateItem Success.,
result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
VERBOSE: Activity tracing:
2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
[email protected], Autodiscover
Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
Proxy=<NULL>
2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
type=AutodiscoverRequestHttpHeaders, message=<Trace
Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
POST /autodiscover/autodiscover.svc HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.004
</Trace>
2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
<wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
r/GetUserSettings</wsa:Action>
<wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
wsa:To>
</soap:Header>
<soap:Body>
<a:GetUserSettingsRequestMessage
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<a:Request>
<a:Users>
<a:User>
<a:Mailbox>[email protected]</a:Mailbox>
</a:User>
</a:Users>
<a:RequestedSettings>
<a:Setting>InternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsVersion</a:Setting>
</a:RequestedSettings>
</a:Request>
</a:GetUserSettingsRequestMessage>
</soap:Body>
</soap:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
type=AutodiscoverResponseHttpHeaders, message=<Trace
Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
HTTP/1.1 200 OK
Transfer-Encoding: chunked
request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
X-CalculatedBETarget: exchserver2.domainname.local
X-DiagInfo: EXCHSERVER2
X-BEServer: EXCHSERVER2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
path=/;
HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
X-FEServer: EXCHSERVER2
Date: Fri, 02 Jan 2015 19:15:55 GMT
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
todiscover/GetUserSettingsResponse</a:Action>
<h:ServerVersionInfo
xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<h:MajorVersion>15</h:MajorVersion>
<h:MinorVersion>0</h:MinorVersion>
<h:MajorBuildNumber>1044</h:MajorBuildNumber>
<h:MinorBuildNumber>21</h:MinorBuildNumber>
<h:Version>Exchange2013_SP1</h:Version>
</h:ServerVersionInfo>
</s:Header>
<s:Body>
<GetUserSettingsResponseMessage
xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>NoError</ErrorCode>
<ErrorMessage />
<UserResponses>
<UserResponse>
<ErrorCode>NoError</ErrorCode>
<ErrorMessage>No error.</ErrorMessage>
<RedirectTarget i:nil="true" />
<UserSettingErrors />
<UserSettings>
<UserSetting i:type="StringSetting">
<Name>InternalEwsUrl</Name>
<Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsUrl</Name>
<Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsVersion</Name>
<Value>15.00.1044.000</Value>
</UserSetting>
</UserSettings>
</UserResponse>
</UserResponses>
</Response>
</GetUserSettingsResponseMessage>
</s:Body>
</s:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
duration Ms=88, response=NoError
2015/01/02 19:15:55.706 Lookup user details,
sipUri=sip:[email protected], [email protected],
sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
tenantId=00000000-0000-0000-0000-000000000000
VERBOSE: Items choice type: CreateItemResponseMessage.
VERBOSE: Response message, class: Success, code: NoError.
VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
VERBOSE: Is command successful: True.
Test passed.
All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
from what I read this was what I was supposed to do.
is this correct?
I have tried so many things I don't know what do to next.
Should the OAuth certificate in exchange be the one exported from Lync?
In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
thank-you
jack

Thomas,
thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
remove-PartnerApplication.
is there a way to completely remove everything that is confirmed when you run
Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
thanks
jack
[PS] C:\Windows\system32>Get-PartnerApplication |fl
RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
Enabled : True
ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
+zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
amTDdZY4h+QBqUvvY=}
AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
Realm : domainname.local
UseAuthServer : False
AcceptSecurityIdentifierInformation : True
LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
IssuerIdentifier :
AppOnlyPermissions :
ActAsPermissions :
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
ObjectClass : {top, msExchAuthPartnerApplication}
WhenChanged : 10/01/2015 17:14:55
WhenCreated : 10/01/2015 17:14:55
WhenChangedUTC : 10/01/2015 17:14:55
WhenCreatedUTC : 10/01/2015 17:14:55
OrganizationId :
Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
OriginatingServer : DomServer2.domainname.local
IsValid : True
ObjectState : Unchanged

Essbase 11.1.2.1 Configuration Issue

Hi ,
I am using windows xp 32 bit processor and installed Essbase 11.1.2.1 successfully.
Configured with one Oracle 11g data base user/Schema working fine and also tried to configure with Two Users/Schemas
in another system workig fine.I heard that if we configure only with one schema Essbase components and Shared
services will conflict.so I would like to know with how many users we have to configure only Hyperion Essbase to get
Better Performance.
Regards
Sekhar.

Hi John,
Then shall i proceed with one user/schema ?
If i proceed with two users/schema is there any problem will come or not ?
Is there any order to configure with one schema ?
like all Foundation components first after Essbase components.
Number of schema/users consideration is not an issue to me but i need best configured
Essbase Server without facing configuration issues in Future.
I had doubt on it may expect clarification ?
Regards
Sekhar

OC4J Configuration issue Oracle 11g R2 Windows XP and Windows 7

Hallo!I have installed Oracle Database 11.2.0.1.0 on both Windows XP and Windows 7 on 2 different machines.
Before installing on both OSs,I had installed Microsoft Loopback Adapter and had set hostname as JOEY-PC and IP address 192.168.0.X.Once the installations were complete and I restarted the machines,I could not start OEM and the error below appears
C:\Documents and Settings\JOEY>emctl start dbconsole
OC4J Configuration issue. C:\app\JOEY\product\11.2.0\dbhome_1/oc4j/j2ee/OC4J_DBConsole_JOEY-PC_orcl not found.
When I went to the C:\app\JOEY\product\11.2.0\dbhome_1\oc4j\j2ee directory,I found the folder OC4J_DBConsole_localhost_orcl instead of OC4J_DBConsole_JOEY-PC_orcl.
I assumed that by using Microsoft Loopback Adapter,I would avoid the error above and that the OC4J_DBConsole folder would permanently remain as OC4J_DBConsole_JOEY-PC_orcl instead of OC4J_DBConsole_localhost_orcl.
Why is this folder changing its name and how can I resolve this issue?
Thanks.

Pl post the contents of the file C:\WINDOWS\System32\drivers\etc\hosts on both servers
What steps did you take to set the hostname to JOEY-PC ?
Srini

Workspace Configuration Issue

Similar Messages

Maybe you are looking for