Workspace folder could not be created

I have updated to Version 2014, but now the media encoder will not start correctly....?
can someone help me? i had uninstalled the former version CC...

Thanx Todd,
i have tried another idea:
Delete this folder: MAC [drive]/Users/[user_name]/Library/Preferences/Adobe/Adobe Media Encoder
i used the bash und change user to su
then rm -r Adobe\ Media\ Encoder
now it works!

Similar Messages

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice.

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

"The home folder could not be created because the network name cannot be found" error in AD users and computers

Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value.
This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share. This behaviour can't be modified.
Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties ?
The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

The Application Data folder for Visual Studio could not be created

Hi! My laptop was working fine but someone recently installed Malware Bytes to my laptop and supposedly found 4 problems and "fixed" them afterwards Visual Studio Professional 2013 and Chrome stopped launching. When I realized this happened I uninstalled
Malwarebytes but it was too late. Every time I tried launching Visual Studio I would get a message that said something like: "Two or more components could not be found. Please reinstall". I did a "fix" on Visual Studio but this solved nothing
only changed the message, the new message was "The Application Data folder for Visual Studio could not be created" so I uninstalled the program and all the extras I found on my Control Panel. Downloaded Visual Studio Community 2013 I'm trying to
install it but I got the same exact message again. Why is this happening? What does it mean? Before I uninstalled Visual Studio Professional 2013 I looked for ways others solved it but nothing seemed to work. Please help. Thanks!

Hello Danny,
The Malware Bytes may have already modified some files/registry values/environment variable which is used by Visual Studio and may be the setup cannot create it for you again.
Please try the workaround here in this blog:http://tutewall.com/application-data-folder-for-visual-studio-could-not-be-created/ and remember to backup your
registry key before you do any actions to the registry table.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The project could not be created,please check the webroot folder(it may overlap with an existing project)

Error msg: "The project could not be created, please check
the webroot folder (it may overlap with an existing project)." This
occurs in the CF/Flex Application Wizard Pproject Information
Window on a Flex3 application. I checked to make sure that there
were no overlapping applications and the message still persists.
There are old threads on this from Flex 2 but the problem still
exists in newly released Flex 3. Please help!

I can't help you with this, but you are not alone. A friend
of mine has exactly the same problem

Unable to Delete Folder, Could not find this item

Currently, I'm having problem deleting an old Folder. Previously, I used its parent as a shared folder, but one day when I tried to clear that folder there is one folder that has duplicate. The problem is one of them (the old one) can't be deleted even after
I deleted all files/folders in that folder, I can't remove/rename that folder (could not find this item) not even with cmd as Administrator. I've tried to defrag my Windows Sever 2012 but the problem still persists. How to fix this problem?
Thanks in advance.

I had this same problem using Server 2012 Std. I tried various options of taking ownership of the parent folder because the Security properties of the folder I was trying to delete were blank, using CMD and Dir /x etc. I even tried sharing
the parent folder and then using Server 2008 R2. None of them worked. When I tried Dir /x Server 2012 doesn't show the 8 character filename with the ~1. I tried typing it in myself, but that didn't work either. I then found that there was a space at the end
of the folder name. I then tried all the CMD options again using a space, still no luck. Then I finally stumbled upon this solution:
Open CMD and then type:
rd /s "\\?\D:\bad\folder\path "
example: rd /s "\\?\D:\Sharedata\folder1\folder2 " - note the space after folder2 as per the space in the folder name. Obviously D: is the drive that has the folder on it.
This worked for me
I've had a similar problem as detailed above; a power shell script that I wrote incorrectly tested for the existence of a directory and created multiple instances of the same directory.
I can confirm that the post from Rayza73 works like a charm!
@Rayza73: First up thanks for the information. Would it be possible for you to describe how the command is able to find and delete the directory?
Many thanks
Shaun

Microsoft.Exchange.WebServices.Data.ServiceResponseException : The specified folder could not be found in the store

In office365, I am trying to access conversation history folder of another user using EWS api.The user that is trying to access has full access rights of the mailbox . If i connect to the mailbox using owa, i can access the conversation history folder
including all other folders. But when i try to connect from the code using ews api below exception is being thrown:
Microsoft.Exchange.WebServices.Data.ServiceResponseException occurred HResult=-2146233088 Message=The specified folder could not be found in the store. Source=Microsoft.Exchange.WebServices StackTrace:
Here is the relevant code
var mailbox = new Mailbox(lyncUser.UserName);
var lyncFolderId = new FolderId(WellKnownFolderName.ConversationHistory, mailbox);
var lyncFolder = Folder.Bind(_exchangeService, lyncFolderId);
Also, the exception doesn't occur if connected to WellKnownFolderName.Inbox.

The WellKnowFolderEnum only works if the folder was created via the Lync 2013 client if the Mailbox is old and has been using older lync clients then you need to search for the folder via name eg see
https://msdn.microsoft.com/en-us/library/office/hh243707%28v=office.14%29.aspx . Generally you want to use both methods eg try to bind to the WellKnowFolderEnum first then use the search method if that fails.
Cheers
Glen

Sparsebundle could not be created (error 45)

I just bought my first ever Mac a little over 30 days ago and also purchased a 1TB Seagate FreeAgent GoFlex Home network storage system. I immediately installed the GoFlex software that included a full integration into Time Machine. This worked perfectly until about 4 days ago when all of a sudden it stopped backing up. I'm getting an error that reads: Time Machine could not complete the backup "...sparsebundle could not be created (error 45)".
I can still access the drive outside of the TM program (although not the ATM folder), so the drive itself perfectly installed and connected. I tried rebooting computer and hard drive; that didn't work. I tried re-selecting the drive from within TM; that didn't work either. I'm not really sure what to do...and am pretty pi$$ed at all those "I'm a Mac vs. I'm a PC" commercials right now because this is the same kinda stuff that got me to leave the Windows based systems in the first place. UGH...so WHY is my $4,000 Mac supposed to be any better that an equivelent $2,500 PC?????? Any suggestions on a fix would be greatly appreciated.

+I'm running 10.6.7, last I checked that was later then 10.5.6.+
Try reading a little more carefully. The server has to be a Time Capsule or a Mac running 10.5.6 or later, not the client. Your NAS is neither, so your configuration is unsupported, and predictably, it doesn't work.
+Mac lends their name and brand to the Seagate product, so I must therefore assume your comments are are ill-informed.+
Apple has nothing to do with the Seagate product. Seagate, not Apple, claims that it's compatible with Time Machine, and Seagate, not Apple, is responsible for that claim. If you think the claim is misleading, you have a point, and if you can't get satisfaction from Seagate I suggest you consult a lawyer.
For the benefit of anyone finding this topic, the Seagate NAS is *not safe to use with Time Machine*.

Cs5 camera raw: "this file could not be created" problem

When I'm attempting to save raw files in any format (jpeg, dng, tiff, etc) to a different directory from where they're intially opened from I get "this file could not be created" error. It saves fine if goes to the same directory where the file has been opened from.
The problem started happening for no apparent reason. There have been no changes to the system (no new installs, etc), except for recent adobe updates, but I can't find any other users complaining about this problem. This happens on admin and all other accounts. Any suggestions on how to fix it would be much appreciated. Thanks in advance.
photoshop cs5 / win7 64-bit

Hm, perhaps a folder closer to the root than the folder you have selected has a permissions issue.
Is the folder you're trying to use rooted on the hard drive (i.e., does the path begin with a drive letter)?
Keep in mind that whether you are an Administrator or not, with Windows UAC enabled the app is normally not running as an Administrator. That can affect permissions. You might want to either try running the app via Run As Administrator or temporarily disable Windows UAC to see if this is an issue.
How are you starting Camera Raw? From within Photoshop or Bridge?
Also, do you have the latest Camera Raw update?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4926
-Noel

Archive's list of contents could not be created

Just started having this problem today after running OS updates.
When I select a folder and create archive (file menu and contextual menu) I receive this error: "Archive's list of contents could not be created" and the zip archive fails to be created.
Tested empty folders, folders with various files, etc. and searched for answers here but couldn't find any similar posts.
Any help would be most welcome.
G5 Mac OS X (10.4.8)

Repair permissions with Disk Utility, restart, and see if the problem persists. If so, create another admin user account, log into it, and try to make an archive.

The Aperture Library could not be created at "/Volumes/Data/Aperture Library.aplibrary". Check the path and try again.

Hi,
I cannot reopen library. During opening aperture I can see a list of libraries. After selection "Aperture library.aplibrary" (default I guess) msg box is open
"Library info directory path contains a file where a folder was expected.
The Aperture Library could not be created at “/Volumes/Data/Aperture Library.aplibrary”. Check the path and try again."
Moreover, aperture library is not visible in other apps like Final Cut X Pro. I assume this is caused by the aperture problem.
Can anybody help me?

Sounds strange.
Did you try to double click your "Aperture Library.aplibrary"?
Maybe trying to open backuped library...
Or creating a new library by pressing the alt key when clicking on the Aperture Dock icon.

Time Machine couldn't complete the backup to "Time Capsule. The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"

We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neil

neillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here.

Trying to resolve 'error 45' sparsebundle could not be created while trying to use Time Machine to back-up to an external wireless harddrive

Hi,
I have been trying to resolve a repeated 'error 45' (Macbook Pro. sparsebundle could not be created) while trying to set up back-ups to run via Time Machine with an external wireless hard drive (Goflex Home by Seagate). I either get that message or a 'sparsebundle is already in use message. Anyone else come across this?

neillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here.

"Enclosing folder could not be modified" error

I work at a school and we've had an XServe for a while but only just got round to getting it set up (we were waiting for a new building to be built that went months behind schedule) and we can't get anything to stream. We're not sure why - and we get the same error message each time.
The error is "The file could not be created, because the enclosing folder could not be modified."
I've checked the folder permissions and yet everything seems like it should work, but as I'm new to XServe, I can't be sure.
Does anyone else have any ideas?
We're trying to make it so that staff and students within the school can access any of the videos on our XServe and stream them over the network. We've followed the instruction manual on how to create a hinted video and add them to the server but every time we try to apply the settings it throws up the error "The file could not be created, because the enclosing folder could not be modified."
This is why I thought it could be the permissions on the folders, but I've checked them and they seem to be okay - but there's obviously something simple that I'm blatantly missing?

Unfortunately not - yours is the first response I've had so far so we're still having the same problems. I just can't seem to figure it out at all.

Workspace folder could not be created

Similar Messages

Maybe you are looking for