Workspace login performance issues
Hi folks,
Thousand of users are using my fm application and they are hitting servers by smart view,workspace..once it's reach peak stage my server was getting hung and we were impliment no.of performnce tunning ( Vertical clustering,cahing,compression,hfm performcne tunning,reg setting )..we appiled performnce tunning all possible ways ..still we are facing performance issues..
we are using 11.1.1.3 version..can anybody suggest me whta i need to do apart above changes..
Hi Denis,
To add on to the query, Basis have applied patch around two days back. As the thread you specified, member who was seeking the solution has not mentioned if the notes helped him finally. I think increasing the memory cache size might help. Also, the time taken to load the home page is irrespective of the load on the server, it takes same amount of time at off peak hours.
Regards,
Chitwanjit
Similar Messages
-
Windows 7 Enterprise login performance issue RODC site
Hi,
We are deploying windows 7 enterprise to all our computers in our domain and we didn't have any performance issue on any site with Full DC. Now we are facing a problem with our multiple sites with RODC but only with new deployed windows 7 (WinXp is not having
this slow login problem). The problem is very strange. Whatever a user start a session on a desktop or laptop with Windows 7, wireless or cabled, when the user enter his credential and press the "validation arrow" next to the password nothing happen
(well it look like nothing happen). After 5 to 10 minutes at this logon screen, we finally see the logon process start applying domain policy, preparing the desktop etc etc and this take less then 10 seconds but remember, we just wait 5 to 10 minutes until
the computer process the "process my log in" botton. Sometime, the CTRL+ALT+DEL screen come back and when we press them we got nothing, we have to wait for the "logon" to occur before doing anything else with the computer.
I've looked to many way to solve this but for now nothing worked.Hi,
Sorry for my dilatory reply. How about using a same user account to log on XP computer? Will it logon fast?
Have you tried to add a user account into Allowed RODC Password Replication Group for test? This problem probably caused by the password authentication problem In RODC host.
For further investigation, you can try to use Network Manitor at RODC host to capture package of client machine authenticate to a domain controller.
The blog about Understanding "Read Only Domain Controller" authentication
may be helpful.
After the above steps, We can narrow the cause of this problem.
If problem persists, this problem may caused by Windows 7 Client performance. Generally speaking, the problem like this most probably caused by sercurity application problem. You can try to disable or uninstall security application temportaily for test.
If there is any progress, please feel free let us know.
Roger Lu
TechNet Community Support -
Performance issues logging on to Workspace 11.1.2.1
Hi All,
We have a distributed install of 11.1.2.1 (2 HSS, 3 PLN, 3HFM, 3 Workspace, 2 FDM servers) and facing significant performance issues:
- Logging on to the Workspace as an external user takes 5 min
- Logging on to the AAS console as an external user takes over 2 min
- Opening HBRs in AAS takes a couple of minutes
- Logging on to HSS as an external user takes over a min
Logging on as a native user takes around 30 seconds.
We have disabled compoments we do not use under the Workspace server properties and applied patch Set Exception (PSE): 13327628 which addressed the following perfomance issues:
• 12913216 – Intermittent login error is observed while attempting to log into EPM System Workspace. Workspace displays the error message “You must supply a valid User Name and Password to log onto the system.” However, user can log in by clicking OK.
• 13341789 – Poor login performance (delay of 3-5 minutes) is observed at the first user login if Workspace web application has been inactive for an hour. Subsequent login performance is not impacted.
• 13388864 – In deployments where a firewall is configured to time out idle applications (for example, after 30 minutes) users can login once, but subsequent login times out.
In Shared Services we have also set Evict Interval and Allowed Idle Connection Time to 5 mins.
Is there anything else we could try to improve performance?
Thanks for your help.
Regards
SebIf you already have deactivated the non used services from WS, it's weird. As I can see you may be using an external directory for authenticating, check on these.
* have you checked the response time from the external directory... sometimes for example in Active directory the user hierarchy is too complex to navigate on it. you can use an LDAP tester to see
* Are you using SSL? if yes, try wtihout SSL
* For workspace Start the non used services, and activate back the services in the WS to see if there it improves with all the apps up ( this will help you to narrow the debugging)
* go directly to java based servers, for instance in the shared services server go directly to the port 28080 for interop, instead of going by http server and check if you can login quick or not. This will help you also to isolate the issue (if it's related or not to Workspace).
Hope this help u to narrow your search
Motor -
Workspace login issue with Firefox
Hi all,
I have run across an issue where the cursor for logging into Workspace does not appear in Firefox when coming from a redirection link in a Task email.
The scenario is as follows: We have a long-lived process that emails a user when a task is assigned to them to log into Workspace. The email contains a link for the user to click on which will open up a browser window to the Workspace login screen. If the user's browser default is Firefox, the browser window will open but the cursor for entering User ID and Password is not immediately available. You can click on the User ID box and it gets highlighted, but there is no cursor available. I can get the cursor to appear if I take the focus away from the login boxes. For example, I click into the address bar, then click back into the User ID box or if I minimize the browser window then restore the browser and click into the User ID box. This would be counter-intuitive to the user who is expecting the cursor to be available when the browser opens up for them.
Has anyone else run into this issue? Is this a known Firefox or Adobe issue that has a fix? I've update to the latest Firefox version and Flash, but still have this issue. There are no problems with IE opening up from the link in the email and the cursor is always available. I don't want to have to force users to use IE as their default browser because of this issue with Firefox. Any help would be appreciated.
Thanks,
MikeIt sounds like a issue with FireFox and Workspace.
LiveCycle Workspace 9.0 - End User Issues
** New for LiveCycle ES2 SP1 ** Problem logging into Workspace 9.0 using Firefox 3.6.x in Windows
When you log into Workspace 9.0 using the Firefox 3.6.x web browser in Windows, you are unable to enter text in the User ID or Password fields. The current workaround is to select another window (or empty area on the desktop), reselect the web browser to reset the focus, and then enter text in the User ID or Password fields.
You can see it in the release notes at http://help.adobe.com/en_US/livecycle/9.0/releasenotes.html#EndUserIssues.
Hope that helps!
...Gil -
Unable to reach Workspace Login Page
Hi,
First some background - I am an Apex developer / administrator. I do not have a DBA background. DBAs install the Apex software and I administer the webserver (although my experience with webservers is that which I've picked up using Apex) and develop applications.
We are currently upgrading our DEV, QA and PROD APEX installations from 2.2.1 to 3.1.1 (specifically 3.1.1.00.09).
We are using Oracle HTTP Server from the Oracle 10.1 companion disk.
We completed this for our DEV and QA environments without a problem. We have not done this for our PROD environment yet.
We also installed APEXLIB 1.7 in both DEV and QA. This was working successfully in DEV. We had not tried it yet in QA.
Both 3.1.1 upgraded environments have been running successfully for about 10 days since the upgrade.
However our QA environment (Oracle 10.2.0.3 running on HP-UX B.11.11 ) experienced a problem yesterday - we can no longer access any Apex applications including the Workspace login pages or application login pages.
The error we get in the browser is:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application ().
We experienced a problem with our QA environment before (prior to upgrade) and we needed to flush the shared pool a few months ago as a temporary fix for this as has been noted on this forum. The problem in question was addressed in this forum post: Re: ORA-06502:PL/SQL: numeric or value error: NULL index table key value
However, with the current problem, flushing the shared pool has not solved the issue. It may not be related.
When we access the workspace login page: http://our_url/apex/crmqa/f?p=4550:1, I see nothing in the Apache logs to indicate an error.
The access_log.xxx file in the Apache logs lists this ...
ip_address_here - apex_public_user [16/Jul/2008:15:15:15 -0500] "GET /apex/crmqa/f?p=4550:1 HTTP/1.1" 200 455
The error_log.xxx file is empty.
I temporarily turned on mod_plsql logging
When I tried to access http://our_url/apex/crmqa/f?p=4550:1
The cid1.log file contained...
<337703562 ms>[ReqStartTime: 16/Jul/2008:15:23:43]
<337703562 ms>Request ID ReqID:6136_1216239823
<337703562 ms>Connecting to database with connect string : "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ip_address_here)(PORT=1526)))(CONNECT_DATA=(SID=crmqa1)))"
<337704171 ms>Doing alter session set nls_language= "AMERICAN" nls_territory= "AMERICA"
<337704171 ms>OpenCursor
<337704234 ms>Altered session to nls_language=AMERICAN nls_territory=AMERICA
<337704234 ms>DeinitCursor
<337704234 ms>OpenCursor
<337704453 ms>DBCharSet is AMERICAN_AMERICA.WE8ISO8859P1, OWAVersion 10.1.2.0.6, 1001020006 (rc=0)
<337704453 ms>DeinitCursor
<337704453 ms>OpenCursor
<337704453 ms>(wpd.c,1757) Logged in as (unknown)
<337704453 ms>(wpx.c,559) Going to select...
<337704453 ms>(wpx.c,613) Have been asked to execute a request
<337704453 ms>(wppa.c,326) Building Arglist based on Parsed Content from WRB
<337704453 ms>(wppa.c,1007) Enter ParseUrlData
<337704453 ms>GET
<337704453 ms>(wppa.c,1056) Getting Values from QUERY_STRING
<337704453 ms>[headers begin]
<337704453 ms>[headers end]
<337704453 ms>p=4550:1
<337704453 ms>(wppa.c,1499) indx = 1, entryCnt = 1
<337704453 ms>(wppa.c,1849) Listing distinct actual names:
<337704453 ms>(wppa.c,1851) p
<337704453 ms>(wppa.c,1853) Listing actuals of array with large entries:
<337704453 ms>(wppa.c,1858) Listing distinct actual names and values:
<337704453 ms>(wppa.c,1890) p, type = 0, value (7) = 4550:1
<337704453 ms>(wppa.c,421) Arglist built, 1 unique entries
<337704453 ms>(wpx.c,620) Going to wpprodb_OciDoBlock...
<337704453 ms>(wpd.c,2734) Cache enabled. Gathering cache information.
<337704453 ms>(wpd.c,2752) Language for this request is en-us
<337704453 ms>(wpd.c,2803) Using user apex_public_user for caching.
<337704453 ms>cache: Checking for user level hit
<337704453 ms>cache: Cache MISS user - D:\oracle\product\10.1.0\db_1/Apache/modplsql/cache\plsql\712\2063
<337704453 ms>cache: Checking for system level hit
<337704453 ms>cache: Cache MISS system - D:\oracle\product\10.1.0\db_1/Apache/modplsql/cache\plsql\sys\878\4773
<337704453 ms>(wppr.c,393) start working with f
<337704453 ms>(wppr.c,1005) The CALL block: len=503, bind_count=9
declare
rc__ number;
start_time__ binary_integer;
begin
start_time__ := dbms_utility.get_time;
owa.init_cgi_env(:n__,:nm__,:v__);
htp.HTBUF_LEN := 84;
null;
null;
null;
null;
f(p=>:p);
if (wpg_docload.is_file_download) then
rc__ := 1;
wpg_docload.get_download_file(:doc_info);
null;
null;
null;
commit;
else
rc__ := 0;
null;
null;
null;
commit;
owa.get_page(:data__,:ndata__);
end if;
:rc__ := rc__;
:db_proc_time__ := dbms_utility.get_time - start_time__;
end;
<337704453 ms>(wppr.c,462) Pl/sql block parsed...
<337704453 ms>(wpdenv.c,1495) CGI Environment has 29 vars. Max name len 128, Max Value Len 128
<337704453 ms> PLSQL_GATEWAY(14)=(6)WebDb
<337704453 ms> GATEWAY_IVERSION(17)=(2)2
<337704453 ms> SERVER_SOFTWARE(16)=(59)Oracle-Application-Server-10g/9.0.4.0.0 Oracle-HTTP-Server
<337704453 ms> GATEWAY_INTERFACE(18)=(8)CGI/1.1
<337704453 ms> SERVER_PORT(12)=(3)80
<337704453 ms> SERVER_NAME(12)=(12)server_name_here
<337704453 ms> REQUEST_METHOD(15)=(4)GET
<337704453 ms> QUERY_STRING(13)=(9)p=4550:1
<337704453 ms> PATH_INFO(10)=(3)/f
<337704453 ms> SCRIPT_NAME(12)=(12)/apex/crmqa
<337704453 ms> REMOTE_ADDR(12)=(14)remote_ip_address_here
<337704453 ms> SERVER_PROTOCOL(16)=(9)HTTP/1.1
<337704453 ms> REQUEST_PROTOCOL(17)=(5)HTTP
<337704453 ms> REMOTE_USER(12)=(17)apex_public_user
<337704453 ms> HTTP_USER_AGENT(16)=(95)Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
<337704453 ms> HTTP_HOST(10)=(12)hostname_here
<337704453 ms> HTTP_ACCEPT(12)=(4)*/*
<337704453 ms> HTTP_ACCEPT_ENCODING(21)=(14)gzip, deflate
<337704453 ms> HTTP_ACCEPT_LANGUAGE(21)=(6)en-us
<337704453 ms> HTTP_ORACLE_ECID(17)=(37)1216239823:ecid_ip_address_here??:7200:6136:1,0
<337704453 ms> WEB_AUTHENT_PREFIX(19)=(1)
<337704453 ms> DAD_NAME(9)=(6)crmqa
<337704453 ms> DOC_ACCESS_PATH(16)=(5)docs
<337704453 ms> DOCUMENT_TABLE(15)=(23)wwv_flow_file_objects$
<337704453 ms> PATH_ALIAS(11)=(1)
<337704453 ms> REQUEST_CHARSET(16)=(5)UTF8
<337704453 ms> REQUEST_IANA_CHARSET(21)=(6)UTF-8
<337704453 ms> SCRIPT_PREFIX(14)=(6)/apex
<337704453 ms> HTTP_IV_USER(13)=(1)
<337704453 ms>StrArrPosBind pos 2 Charset Id : 871
<337704453 ms>StrArrPosBind pos 3 Charset Id : 871
<337704453 ms>StrArrPosBind pos 6 Charset Id : 871
<337704781 ms>(wpd.c,1954) Begin header parsing...
<337704781 ms>(wpd.c,2003) Got a line (47 bytes): X-ORACLE-IGNORE: IGNORE
<337704781 ms>(wpd.c,2021) X-ORACLE-IGNORE parsed
<337704781 ms>(wpd.c,2003) Got a line (47 bytes): X-ORACLE-IGNORE: IGNORE
<337704781 ms>(wpd.c,2021) X-ORACLE-IGNORE parsed
<337704781 ms>(wpd.c,2003) Got a line (47 bytes): X-ORACLE-IGNORE: IGNORE
<337704781 ms>(wpd.c,2021) X-ORACLE-IGNORE parsed
<337704781 ms>(wpd.c,2003) Got a line (47 bytes): X-ORACLE-IGNORE: IGNORE
<337704781 ms>(wpd.c,2021) X-ORACLE-IGNORE parsed
<337704781 ms>(wpd.c,2003) Got a line (77 bytes): Content-type: text/html; charset=UTF-8
<337704781 ms>(wpd.c,2102) Parsed header - Content-Type:text/html; charset=UTF-8
<337704781 ms>(wpd.c,2003) Got a line (49 bytes): X-DB-Content-length: 443
<337704781 ms>(wpd.c,2162) Parsed header - X-DB-Content-length:443
<337704781 ms>(wpd.c,2003) Got a line (1 bytes):
<337704781 ms>(wpd.c,2010) End of headers detected
<337704843 ms>(wpcs.c, 76) Executed 'begin dbms_session.reset_package; end;' (rc=0)
<337704843 ms>(wpd.c,1812) Going to close cursor
<337704843 ms>DeinitCursor
<337704843 ms>(wpx.c,626) Normal completion
<337704843 ms>(wpx.c,654) Shutdown has been called
<337704843 ms>(wpx.c,666) Going to logoff
<337704843 ms>Logoff: Pooling this connection
<337704843 ms>[ReqEndtime: 16/Jul/2008:15:23:44]
<337704843 ms>[ReqExecTime: 1281 ms]
and the 6136.log file contained...
<337703562 ms>[ReqStartTime: 16/Jul/2008:15:23:43]
<337703562 ms>Request ID ReqID:6136_1216239823
<337703562 ms>(wpdenv.c,663) script_name='/apex/crmqa' path_info='/f'script_prefix='/apex' dad_name='crmqa'
<337703562 ms>(wpdenv.c,776) User-Agent is Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
<337703562 ms>(wpdenv.c,1388) dadname = 'crmqa', path_info = 'f'
<337703562 ms>(wpdenv.c,1427) Service will NOT use dynamic auth
<337703562 ms>(wpx.c,387) Initialized successfully 0
<337703562 ms>(wpx.c,309) SetRemoteUser : Remote User set to apex_public_user for this request.
<337703562 ms>(wpx.c,476) Auth info from .APP file is being used
<337703562 ms>(wpd.c,1724) Attempting to logon with '(unknown)'
<337704843 ms>Maximum memory allocated by the request is 75158 bytes
<337704843 ms>[ReqEndtime: 16/Jul/2008:15:23:44]
<337704843 ms>[ReqExecTime: 1281 ms]
The DAD config file contains the following entries...
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# /i contains version 221 images
Alias /i "D:\oracle\product\10.1.0\db_1\Apache\Apache\images"
Alias /i31 "D:\oracle\product\10.1.0\db_1\Apache\Apache\images311"
<Location /apex/crmqa>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlCGIEnvironmentList HTTP_IV_USER
PlsqlDatabaseUsername apex_public_user
PlsqlDatabasePassword xxx
PlsqlDatabaseConnectString ip_address:port_number:crmqa1
PlsqlDefaultPage apex
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.UTF8
</Location>
<Location /apex/crmdev>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlCGIEnvironmentList HTTP_IV_USER
PlsqlDatabaseUsername apex_public_user
PlsqlDatabasePassword xxx
PlsqlDatabaseConnectString ip_address:port_number:crmdev1
PlsqlDefaultPage apex
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.UTF8
</Location>
The DAD entries above point to databases on which Apex is version 3.1.1 and we have modified the image prefix on these database to be a value of /i31, using the script reset_image_prefix.sql.
This DAD file also contains DAD entries (not included above) for other database running Apex 2.2.1 which are using the default image prefix value of /i
I can ping the database ip address from the machine on which the OHS webserver is running.
I have installed OHS on my local laptop and have the same problems.
I can however execute a procedure on the database using the same OHS / DAD configuration running something like http://our_url/apex/crmqa/schema_name.test_connection?v_wait=1where the proc test_connection proc sleeps for v_wait seconds before returning a simple html page confirming that it worked.
I can login to the apex_public_user account via my SQL Developer client
At this point I do not know what else to try to resolve this issue. I am about to start trawling through metalink for related issues if I can find anything.
Any assistance is very much appreciated...
Thank you.
AlanI also see this post on Metalink - could it be related?
https://metalink.oracle.com/metalink/plsql/f?p=130:14:12042222629340980284::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,429261.1,1,1,1,helvetica
Subject: After upgrading database to 10.2.0.X, getting ORA-06502: PL/SQL: numeric or value error:
Doc ID: Note:429261.1 Type: PROBLEM
Last Revision Date: 08-MAY-2008 Status: MODERATED
In this Document
Symptoms
Changes
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle Application Express (formerly HTML DB) - Version: 2.0.0.0.49
This problem can occur on any platform.
Symptoms
On the Application builder page, when attempting to click details to view the applications, the following error occurs:
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
However, the problem seems to disappear after a while..
Changes
Upgrade of database (from any version to 10.2.0.1 or 10.2.0.2)
Cause
The reason is due to database Bug 4752541 Abstract: APPSST 10G: ORA-6550 AFTER UPGRADE TO 10.2.0.1. However Patch 47552541 is obsoleted and not available via metalink, it was superceded by Patch 5705795.
This bug is fixed in patchset 10.2.0.4 and above. For current and older versions, Patch 5705795 must be applied. If the patch cannot be found for a particular version or O/S , log a service request with Oracle Support to obtain the patch.
This is also documented in the Apex forum page: Re: wwv_flow.accept error lists the following bug as
root cause.
Solution
Interim solution:
Flush the database shared pool when the problem occurs
Permanent solution:
Upgrade database to 10.2.0.4 or above
OR
Download and apply database Patch 5705795. If the version for your database is not available , create a new Service request from metalink under product RDBMS to request for a patch
References
Bug 4752541 - APPSST 10G: ORA-6550 AFTER UPGRADE TO 10.2.0.1
Keywords
UPGRADE~DATABASE; UPGRADE~TO~10.2.0.4; UPGRADE~TO~10.2.0.1; APPLICATION~DETAILS; UPGRADE~FROM~10.2.0.2; UPGRADE~TO~10.2.0.3; VIEW~DETAILS; -
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance issues with version enable partitioned tables?
Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
Object Name Rows Bytes Cost Object Node In/Out PStart PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE 1 249
UPDATE SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI 1 266 249
PARTITION RANGE ALL 1 9
TABLE ACCESS FULL SIG.SIG_QUA_IMG_LT 1 259 2 1 9
VIEW SYS.VW_NSO_1 1 7 247
NESTED LOOPS 1 739 247
NESTED LOOPS 1 677 247
NESTED LOOPS 1 412 246
NESTED LOOPS 1 114 244
INDEX RANGE SCAN WMSYS.MODIFIED_TABLES_PK 1 62 2
INDEX RANGE SCAN SIG.QIM_PK 1 52 243
TABLE ACCESS BY GLOBAL INDEX ROWID SIG.SIG_QUA_IMG_LT 1 298 2 ROWID ROW L
INDEX RANGE SCAN SIG.SIG_QUA_IMG_PKI$ 1 1
INDEX RANGE SCAN WMSYS.WM$NEXTVER_TABLE_NV_INDX 1 265 1
INDEX UNIQUE SCAN WMSYS.MODIFIED_TABLES_PK 1 62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben -
Performance issue with Hyperion Interactive Reporting Report
Hi,
We created a report in Hyperion Interactive reporting using Hyperion Essbase as database connection file .
Report performance was good in Interactive reporting Studio we don't have any problem in studio.
when we open the report in Hyperion Workspace report performance is very very slow. We are using system 11.1.1.3
Any suggestions to resolve performance issue will be really helpful.
Thanks in advance
Regards
VamsiThank you so much, It is working fine when the report is in table structure (List Report. I mean insert a table and drag and drop the fact items and dimention items in to the table)
The requirement is looks like that, it is not a pivot table. Now I want apply the different color or shadow for Item1 and Item 2 in all groups... Please help me.
Total Fact Fact 1 fact 2 Fact 3 ......
Group 1
Item 1 Item 1 000 000 000 000 ...
Item 2 Item2 000 000 000 000 ....
Group 2
Item 1 Item 1 000 000 000 000 ...
Item 2 Item2 000 000 000 000 ....
Group 3
Item 1 Item 1 000 000 000 000
Item 2 Item2 000 000 000 000
Thanks and Regards,
Murugan -
Major performance Issues after upgrading to 10.9.2
Hi,
I have been having major performance issues almost preventing me from using the computer at times. I suspect I don't have enough memory to run Maverick as the computer was great before I upgraded.
If any experts or people with ideas for me to speed up the computer, please respond. If you think the only way to improve performance is add memory or revert back to a previous version of OSX that I have a backup for, let me know.
Here is the info on my system, thank you in advance!!
Hardware Information:
MacBook Pro (15-inch, Late 2008)
MacBook Pro - model: MacBookPro5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 3 days 21:20:10
Disk Information:
Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
:c (disk0s2) / [Startup]: 249.2 GB (67.82 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Configuration files:
/etc/sysctl.conf - Exists
/etc/hosts - Count: 29
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.LaCie.ScsiType00 (1.2.0) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.leapfrog.codeless.kext (2) Support
[not loaded] com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
[not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
[not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.leapfrog.connect.shell.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.brother.LOGINserver.plist Support
[running] com.google.keystone.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[failed] [email protected]
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
Google Chrome
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.1.18536 Support
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
OfficeLiveBrowserPlugin: Version: 12.2.9 Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.201 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.3.1.18536 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.9 Support
GarminGpsControl: Version: 2.6.4.0 Release Support
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
Dashlane: Version: 2.4.0.55923
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
Move_Media_Player: Version: npmnqmp 071705000010 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
Picasa: Version: 1.0 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Growl Support
Time Machine:
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
2% SystemUIServer
1% diskimages-helper
1% mds
0% Google Chrome Helper EH
Top Processes by Memory:
94 MB Google Chrome
59 MB GoogleSoftwareUpdateDaemon
57 MB Google Chrome Helper EH
52 MB Google Chrome Helper
39 MB Finder
Virtual Memory Information:
40 MB Free RAM
499 MB Active RAM
481 MB Inactive RAM
465 MB Wired RAM
7.33 GB Page-ins
502 MB Page-outsThe performance issues are due to third party software. Mavericks at the minimum requires 2GB's of RAM but I don't think that's the issue. And you can upgrade RAM anytime.
MacKeeper should be uninstalled. It does far more harm than good.
Do not install MacKeeper: Apple Support Communities
Uninstall instructions > how to uninstall MacKeeper
249.2 GB (67.82 GB free)
Keep an eye on available disk space.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space. Less can slow your Mac down.
You also need to uninstall CleanMyMac > How To Uninstall CleanMyMac
Third party so called Mac cleaning utilities are not necessary on a Mac. Your Mac runs maintenance in the background for you.
Mac OS X: About background maintenance tasks -
Performance issue while opening the report
HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande -
Performance issues since upgrade
I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
I have also removed TotalFinder and have noticed no improvement and still have the above issue.
Thanks in advance!
Here is my EtreCheck:
Problem description:
slow performance on Mavericks
EtreCheck version: 2.0.11 (98)
Report generated November 11, 2014 at 8:51:26 AM EST
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
Color LCD 1920 x 1200
LED Cinema Display 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:46:22
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 749.30 GB (256.69 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Tablet PTZ-630
Logitech Logitech USB Headset
Apple Inc. Display iSight
Apple Inc. Apple LED Cinema Display
Apple Inc. Display Audio
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
Iomega HDD unknown_device 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/Protector
[not loaded] com.symantec.kext.protector.panther (1.0f5) Support
[not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
/Library/StartupItems/SymAutoProtect
[loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
Startup Items: ℹ️
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
SMC: Path: /Library/StartupItems/SMC
SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
SymProtector: Path: /Library/StartupItems/SymProtector
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.jamfsoftware.jamf.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.symantec.quickmenu.application.plist Support
[running] com.wacom.wacomtablet.plist Support
[running] net.juniper.pulsetray.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.fitbit.fitbitd.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.jamfsoftware.jamf.daemon.plist Support
[not loaded] com.jamfsoftware.startupItem.plist Support
[loaded] com.jamfsoftware.task.1.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.rogueamoeba.instanton-agent.plist Support
[running] net.juniper.AccessService.plist Support
[loaded] net.juniper.UninstallPulse.plist Support
User Launch Agents: ℹ️
[loaded] com.valvesoftware.steamclean.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
Dropbox Application (/Applications/Dropbox.app)
Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
cdn Volume (/Volumes/cdn)
TotalFinder Application (/Applications/TotalFinder.app)
SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
Internet Plug-ins: ℹ️
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
AdobePDFViewer: Version: 10.0.2 Support
Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
iPhotoPhotocast: Version: 7.0
DirectorShockwave: Version: 11.5.9r620 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 4.0.60310.0 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
net.juniper.DSSafariExtensions: Version: (null) Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
User Internet Plug-ins: ℹ️
SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
Safari Extensions: ℹ️
1Password
Adblock Plus
Reddit Enhancement Suite
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
SymAutoProtect
Symantec\nQuickMenu Support
WacomTablet Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Destinations:
Iomega HDD [Local]
Total size: 500.04 GB
Total number of backups: 37
Oldest backup: 2014-10-14 14:11:11 +0000
Last backup: 2014-11-11 13:27:48 +0000
Size of backup disk: Excellent
Backup size 500.04 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
36% com.apple.WebKit.Plugin.64
34% SymAutoProtect
13% WindowServer
9% Unity
4% Activity Monitor
Top Processes by Memory: ℹ️
455 MB Safari
361 MB com.apple.WebKit.Plugin.64
292 MB Unity
77 MB com.apple.WebKit.Networking
77 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
2.08 GB Free RAM
2.39 GB Active RAM
1.34 GB Inactive RAM
1.40 GB Wired RAM
1.11 GB Page-ins
5.54 GB Page-outsActivity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Oracle BPM 11.1.1.5 Performance issues
Hi,
I have 2 Node Cluster of Oracle SOA 11.1.1.5 installed. Have a separate cluster for SOA/BPM, BAM, OSB, WSM. Here are the OS and Java versions
Java Vendor: HP
Java Version: 1.6.0.14
OS: HP-UX
OS Version: B.11.31
Running into an issue where Oracle BPM is performing very slow the task forms takes forever to come up and performing any actions takes too long to proceed som time it keeps timing out. I have over 100 SOA Process running plus some BPM Process but BMP Workspace application is running too slow as have customized tasks forms. But the same works a bit better in other instance which is non-clustered. Any idea what can be done on the server level to get around the performance issues. So far have modified Audit Levels and reduced soa-infra bpm log have the following settings in setDomainEnv.sh for USER_MEM_ARGS=-Xms2000m -Xmx6000m -XX:PermSize=1000m
But not help. Any idea what else to look into to get around these bpm performance issues. Here is what I have in setSOADomainEnv.sh
# 8395254: add -da:org.apache.xmlbeans... in EXTRA_JAVA_PROPERTIES
EXTRA_JAVA_PROPERTIES="${EXTRA_JAVA_PROPERTIES} -da:org.apache.xmlbeans..."
XENGINE_DIR="${SOA_ORACLE_HOME}/soa/thirdparty/edifecs/XEngine"
DEFAULT_MEM_ARGS="-Xms512m -Xmx1024m"
PORT_MEM_ARGS="-Xms768m -Xmx1536m"
if [ "${JAVA_VENDOR}" != "Oracle" ] ; then
DEFAULT_MEM_ARGS="${DEFAULT_MEM_ARGS} -XX:PermSize=128m -XX:MaxPermSize=512m"
PORT_MEM_ARGS="${PORT_MEM_ARGS} -XX:PermSize=256m -XX:MaxPermSize=512m"
fi
#========================================================
# setup LD_LIBRARY_PATH if directory is present...
#========================================================
if [ -d ${XENGINE_DIR}/bin ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${XENGINE_DIR}/bin"
export LD_LIBRARY_PATH
fi
#========================================================
# setup platform specific environment variables
#========================================================
case ${PLATFORM_TYPE} in
# AIX
AIX)
if [ -d ${XENGINE_DIR}/bin ]; then
LIBPATH="${LIBPATH}:${XENGINE_DIR}/bin"
export LIBPATH
fi
USER_MEM_ARGS=${PORT_MEM_ARGS}
export USER_MEM_ARGS
# Fix for 7828060
POST_CLASSPATH=${POST_CLASSPATH}:${SOA_ORACLE_HOME}/soa/modules/soa-ibm-addon.jar
# Fix for 7520915 and 8264518 and 8305217
EXTRA_JAVA_PROPERTIES="${EXTRA_JAVA_PROPERTIES} -Djavax.xml.datatype.DatatypeFactory=org.apache.xerces.jaxp.datatype.DatatypeFactoryImpl -Djava.endorsed.dirs=${SOA_ORACLE_HOME}/bam/modules/org.apache.xalan_2.7.1"
export EXTRA_JAVA_PROPERTIES
# HPUX
HP-UX)
if [ -d ${XENGINE_DIR}/bin ]; then
SHLIB_PATH="${SHLIB_PATH}:${XENGINE_DIR}/bin"
export SHLIB_PATH
fi
LD_LIBRARY_PATH="${XENGINE_DIR}/bin:${LD_LIBRARY_PATH}"
export LD_LIBRARY_PATH
USER_MEM_ARGS="-d64 ${PORT_MEM_ARGS}"
export USER_MEM_ARGS
;;And here is what I have in setDomainEnv.sh
XMS_SUN_64BIT="256"
export XMS_SUN_64BIT
XMS_SUN_32BIT="256"
export XMS_SUN_32BIT
XMX_SUN_64BIT="512"
export XMX_SUN_64BIT
XMX_SUN_32BIT="512"
export XMX_SUN_32BIT
XMS_JROCKIT_64BIT="256"
export XMS_JROCKIT_64BIT
XMS_JROCKIT_32BIT="256"
export XMS_JROCKIT_32BIT
XMX_JROCKIT_64BIT="512"
export XMX_JROCKIT_64BIT
XMX_JROCKIT_32BIT="512"
export XMX_JROCKIT_32BIT
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_64BIT
WLS_MEM_ARGS_32BIT="-Xms256m -Xmx512m"
export WLS_MEM_ARGS_32BIT
else
WLS_MEM_ARGS_64BIT="-Xms512m -Xmx512m"
export WLS_MEM_ARGS_64BIT
WLS_MEM_ARGS_32BIT="-Xms512m -Xmx512m"
export WLS_MEM_ARGS_32BIT
fi
if [ "${JAVA_VENDOR}" = "Oracle" ] ; then
CUSTOM_MEM_ARGS_64BIT="-Xms${XMS_JROCKIT_64BIT}m -Xmx${XMX_JROCKIT_64BIT}m"
export CUSTOM_MEM_ARGS_64BIT
CUSTOM_MEM_ARGS_32BIT="-Xms${XMS_JROCKIT_32BIT}m -Xmx${XMX_JROCKIT_32BIT}m"
export CUSTOM_MEM_ARGS_32BIT
else
CUSTOM_MEM_ARGS_64BIT="-Xms${XMS_SUN_64BIT}m -Xmx${XMX_SUN_64BIT}m"
export CUSTOM_MEM_ARGS_64BIT
CUSTOM_MEM_ARGS_32BIT="-Xms${XMS_SUN_32BIT}m -Xmx${XMX_SUN_32BIT}m"
export CUSTOM_MEM_ARGS_32BIT
fi
MEM_ARGS_64BIT="${CUSTOM_MEM_ARGS_64BIT}"
export MEM_ARGS_64BIT
MEM_ARGS_32BIT="${CUSTOM_MEM_ARGS_32BIT}"
export MEM_ARGS_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_ARGS="${MEM_ARGS_64BIT}"
export MEM_ARGS
else
MEM_ARGS="${MEM_ARGS_32BIT}"
export MEM_ARGS
fi
MEM_PERM_SIZE_64BIT="-XX:PermSize=128m"
export MEM_PERM_SIZE_64BIT
MEM_PERM_SIZE_32BIT="-XX:PermSize=128m"
export MEM_PERM_SIZE_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_PERM_SIZE="${MEM_PERM_SIZE_64BIT}"
export MEM_PERM_SIZE
else
MEM_PERM_SIZE="${MEM_PERM_SIZE_32BIT}"
export MEM_PERM_SIZE
fi
MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=512m"
export MEM_MAX_PERM_SIZE_64BIT
MEM_MAX_PERM_SIZE_32BIT="-XX:MaxPermSize=512m"
export MEM_MAX_PERM_SIZE_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_MAX_PERM_SIZE="${MEM_MAX_PERM_SIZE_64BIT}"
export MEM_MAX_PERM_SIZE
else
MEM_MAX_PERM_SIZE="${MEM_MAX_PERM_SIZE_32BIT}"
export MEM_MAX_PERM_SIZE
fi
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
MEM_DEV_ARGS="-XX:CompileThreshold=8000 ${MEM_PERM_SIZE} "
export MEM_DEV_ARGS
fi
fi
# Had to have a separate test here BECAUSE of immediate variable expansion on windows
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_DEV_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "HP" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "Apple" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${debugFlag}" = "true" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -da:org.apache.xmlbeans... "
export JAVA_OPTIONS
fi
export USER_MEM_ARGS="-Xms4g -Xmx6g -XX:PermSize=2g -XX:+UseParallelGC -XX:+UseParallelOldGC"Here is the output of the top command
Load averages: 0.08, 0.06, 0.06
315 processes: 205 sleeping, 110 running
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.06 4.0% 0.2% 1.0% 94.8% 0.0% 0.0% 0.0% 0.0%
2 0.07 3.6% 5.0% 0.2% 91.2% 0.0% 0.0% 0.0% 0.0%
4 0.07 2.0% 0.2% 0.0% 97.8% 0.0% 0.0% 0.0% 0.0%
6 0.07 2.4% 0.2% 0.8% 96.6% 0.0% 0.0% 0.0% 0.0%
8 0.09 1.2% 0.2% 10.9% 87.7% 0.0% 0.0% 0.0% 0.0%
10 0.12 3.0% 0.0% 11.1% 85.9% 0.0% 0.0% 0.0% 0.0%
12 0.08 3.0% 0.2% 6.6% 90.3% 0.0% 0.0% 0.0% 0.0%
14 0.09 4.2% 1.2% 0.8% 93.8% 0.0% 0.0% 0.0% 0.0%
avg 0.08 3.0% 1.0% 3.8% 92.2% 0.0% 0.0% 0.0% 0.0%
System Page Size: 4Kbytes
Memory: 38663044K (38379156K) real, 149420048K (148978096K) virtual, 26349848K f
ree Page# 1/63
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
4 ? 3926 root 152 20 213M 70040K run 694:47 10.05 10.04 cimprovagt
4 ? 6855 user1 152 20 7704M 1125M run 4:36 9.31 9.29 java
0 ? 6126 user2 152 20 2790M 1863M run 22:57 4.16 4.15 javaHere is the Memory on the box
Memory: 98132 MB (95.83 GB)
ThanksAfter changing JVM settigns for soa cluster it's a bit better but still slow so wondering what other tweaks can be done on the JVM side. Here is what is for the SOA Cluster
USER_MEM_ARGS="-server -Xms12928m -Xmx12928m -XX:PermSize=3072m -Xmn3232m -XX:+SXTElimination -XX:+UseParallelGC -XX:+UseParNewGC -XX:+ExplicitGCInvokesConcurrent -XX:-TraceClassLoading -XX:-TraceClassUnloading"
We are running multiple instances on the same boxes and the total RAM on the machine is 95 GB on each box which is being shared across 4 cluster environments. For now other 3 cluster environments have the SOA Cluster JVM setting as
USER_MEM_ARGS="-server -Xms4096m -Xmx4096m -XX:PermSize=1024m -Xmn1152m -XX:+SXTElimination -XX:+UseParallelGC -XX:+UseParNewGC -XX:+ExplicitGCInvokesConcurrent -XX:-TraceClassLoading -XX:-TraceClassUnloading"
Any help on what else I can tweak or set in JVM to get a better performance.
Thanks -
Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.Quote
Originally posted by AzaghalSEI
Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.
The startup problem might just be a screwy psu. Your antec *should* be able to power your stuff just fine, but maybe it is defective in some strange way.
What is your 3dmark03 score? If it is 3000-4000, (approx perf. level of ati 9600xt), then it is fine.
Check your memory using memtest86+, and try underclocking it to ddr333.
UNplug usb devices, and see if it speeds up boot. Also, I would not recommend bios 1.8 since people seem to have some troubles with it.
Also, try disabling agp fast writes, disabling spread spectrum, and maybe boosting ram voltage a tiny bit.
Try booting without your audigy plugged in, and try booting barebones (nothing but 1 hard drive with os) and see what happens.
I'm no expert, but you might get lucky trying these steps. -
Intermittent Workspace/Shared Services issue - 11.1.2.1
All
Version 11.1.2.1
Using Shared Services with Native (1) and MSAD (2) ; IDs are members of Native groups which are provisioned to the application
We are experiencing an intermittent problem in Workspace where one day we can login without issue, and the next, we are stuck at “Authenticating User..” for a long time before login finally fails with:
“EPMCSS-00387: Failed to authenticate user xxxxxxx from user directory MSAD. Invalid password. LDAP response read timed out, timeout used: 120000ms..Enter valid credentials.”
More details shows ”URI: http://.....:19000/workspace/login
Code: 1000
Description: An error occurred processing the result from the server”
Alternately, sometimes login will succeed, but will receive the message:
“The startup document does not exist in the repository. Select a new startup document in the General preferences tab”.
We have opened an SR with Oracle but can’t seem to make much progress resolving the issue. Any ideas?Hi,
Did you ever get to the bottom of this? We are on 11.1.2.1 and facing the exact same issue when logging on to HSS or Workspace:
EPMCSS-00387: Failed to authenticate user sebastien.lejarle from user directory EXWC. Invalid password. LDAP response read timed out, timeout used:120000ms.. Enter valid credentials.
We cant figure out what s wrong.
We have applied Oracle's recommended IE 7 and IE8 settings to no avail.
Thanks again.
Seb -
OAM 11g R2- Performance issue /oam/auth/cred
Hi Guys,
we are facing issues regarding oam performance we are seeing unusual time delay on load, at submission of /oam/auth/cred to the landing page. we have 2 managed server having 2gb of heap size.
Any pointers will really helpful.
Regards
975200Hi 975200,
This error occurs during login, if some credentials or request ID is not provided in post data. Your issue is because of performance issue only.
Try increasing cache size: OAM Console --> Access Manager --> Access Manager Settings --> Try increasing Resource Matching cache
Check Session Count: Check number of sessions present while running load run, which gives actual users successfully logging in.
Which tool you are using for performance test?
What are server usages during test? (all servers)
Try to login manually during test and check if you are able to login or not?
Thanks & Regards,
Chinni Ravitheja
Maybe you are looking for
-
Getting Java mapping errors when testing my Interface mapping
Hi, I'm trying to test my interface mapping from IR, I keep getting these exceptions. All I'm doing in my interface mapping is I have two mapping programs a XSLT mapping with java helper functions with the XSL and a message mapping. In the test it pa
-
Installing Oracle 10.2.0.3 on a Vista machine
Installing Oracle 10.2.0.3 on a Vista machine and received the following error message. "Checking for proper system clean-up.... Actual Result: :java.lang.UnsatisfiedLinkError:Native Library C:\Users\Main\AppData\Local\Temp\OraInstall2011-01-24_02-31
-
Can anyone explain why this site is so slow to load?
Strangely, it pops up fine in Safari but is excruciatingly slow to load in Firefox and IE (with graphics and some of the audio player icons not showing for literally multiple minutes, etc.): http://ddjackson.net/D.D.JacksonDemos.html Any help would b
-
Unable to sms in mandarin and english
I have click on the Chinese text keyboard but still unable to use it in the sms section. Please help.
-
JCAPS 5.1.3 backup project files
I'd like to schedule daily backup of my repository. Where are located project data? Which directory should I backup? Is it repository/objects?