Workspace Preferences -- Setting the right default values

Good afternoon --
We are in the midst of rolling out Hyperion Planning 9.3.x along with Financial Reporting, SmartView, etc. to a large population (~1000 users). We would like to be able to set and/or reset certain user preferences.
The most salient example is Financial Reporting > General > User Point of View > Preview --- default setting is "Off" but this causes user confusion and support calls the first time users log in. Is there a way for us to set the default to "On" for all users instead?
[Other potential examples -- default start-up content, PDF vs. HTML Preview, position of the POV]
Thanks,
Jason

user10174749 wrote:
Good afternoon --
We are in the midst of rolling out Hyperion Planning 9.3.x along with Financial Reporting, SmartView, etc. to a large population (~1000 users). We would like to be able to set and/or reset certain user preferences.
The most salient example is Financial Reporting > General > User Point of View > Preview --- default setting is "Off" but this causes user confusion and support calls the first time users log in. Is there a way for us to set the default to "On" for all users instead?
[Other potential examples -- default start-up content, PDF vs. HTML Preview, position of the POV]
Thanks,
JasonOur Oracle consultants helped us to setup the preference "Preview" be "On" by scripts.

Similar Messages

How to set the radiogroup default value?

I have created a radiogroup named P521_SIZE_NUM(Dealsize, DealNum) and want DealSize is checked when the page is showed. how can I set default value in the page Definition?

If you made a radio group off of the following static LOV:
STATIC2:One;1,Two;2,Three;3if you set the default value of your radio group to 2, the radio button with the label Two will be selected. You have to make sure to set the default value to the actual return value not the display value.
-Ghoulies

HOW TO SET A ITEM DEFAULT VALUE to today

I have a item using select list and I like to set this item default value as
today's date , such as "select to_char(sysdate,'YYYY-MM-DD') from dual"
HTMLDB failed recongnize the default value, or throw error Error ERR-9132 Error in PLSQL expression for item default code, ...". I have tried each of 3 avaialable Default Value Types
Per http://forums.oracle.com/forums/thread.jspa?messageID=443287, it is used to be doable, but the default value type (sql) is no longer avaialble in HTMLDB 2.0
I would appreaciate it very much if anyone has successfully done this before, either set to today or current month

Ching - Did you try a PL/SQL Expression using to_char(sysdate,'YYYY-MM-DD')?
There have been no changes to the item default types available in HTML DB. The thread you referenced is for Oracle Portal, a separate and unrelated product.
Scott

How do I set the IFSshell timeout value?

How do I set the IFSshell timeout value?
I open an ifsshell and move to a directory.
Do something. Come back in 10 minites and the shell has timed
out. Have to logout and log back in and move to the directory
again.
Thanks
-Mitch

FYI,
IFS.PROTOCOLSERVER.SESSION.DEFAULT.Timeout
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
in cup server configuration

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

How to set radio group default value

Hi,
I have a radio group in a portal form. How do I set one of them as checked when the form comes up?
Thanks;
Kelly.

It might be possible with javascript. since a radio group is an array, you should loop
through the index to set the correct
checked value.
<BLOCKQUOTE>quote:<HR>Originally posted by [email protected]:
Kelly,
I tried that already, and it still didn't work. Any idea? I am using portal version 3.0.6.
Thanks;
Kelly.
<HR></BLOCKQUOTE>
null

Limit the no of segments per IDOC to less than the current default value

Hi friends,
please help me in the following issue.
The possibility to limit the number
of segments per IDOC to less than the current default value.
Purpose is to limit the traffic of IDOCs between systems.
How to solve this issue to avoid traffic
Thanks in advance.
Regards
Sandeep

Hi Kiran,
Actually we are using standard ones at that time we are getting prolems. When using custom developed ALE's
we are putting segment size is less.To decrease segment size is there any filtering at the sender side? To change segment size may be nedd to take help form SAP.
But if have filtering at any level from sender side need to confirm before consult SAP.
Regards
Sandeep

When I set the right date, it blocks my yahoo mail

My date time is one day ahead, when i set the right date, my yahoo mail gets crazy and stop sending mails.

It would be best to respond to [email protected] as I can't get to me regular e-mail.
Jim Wolf

Setting the container element values

Hi Experts,
While I am trying to set the container element values, it is resulting in an error.
We are designing a leave request WF using WS12300111. We are using ABAP classes.
Inside a method, I have written the following code :
swc_set_element container 'PERNR' lv_pernr.
It is giving an error. It says 'SWC_SET_ELEMENT' not defined.
First of all i would like to know if we can use this statement in ABAP classes. If we have to set a value of a container element, how can we go about doing the same in ABAP classes.
Kindly guide me on the same.
Cheers,
Belinda Clarke

Hi,
No, you cannot use those in the ABAP classes. (EDIT: Or you can, put it doesn't make really any sense.)
Just make exporting parameters into your method. Put your variables (PERNR, etc.) in those. Then do the binding from method to the task container (in the task editor). This way you will get the values from a method to the task container.
Regards,
Karri
Edited by: Karri Kemppi on Sep 9, 2011 9:24 AM

How to set the parameter ID value for a range

I am trying to call transaction KSB1 (Display actual line items for cost center) by supplying all the default values for the selection options/parameters and skipping the selection screen from the calling program. However, for the cost center range, both HIGH and LOW field have the same PID (i.e. KOS). Same thing for the cost element range. When I set the value for PID "KOS", only the low value got populated.
I tried to pass a BDC table to the
CALL TRANSACTION 'KSB1' USING bdc_tab
, but the PID used before takes higher priority so the bdc_tab values got overwritten by the PID values for those fields.
Does anybody know how to find or set the PID for a selection range? I need PID for Cost center range, cost element range and the period (PID="VPE").
Any advice is appreicated. Thank you
Minami

otherwise try to make use of SUBMIT command.
Hi Preetahm ,
KSB1 is a Report , not a Tcode to maintain master data or any thing like that ?, u can also cross check?
by using SUBMIT command u have to RKAEP000 this program along with the selection screen.
regards
Prabhu
Message was edited by: Prabhu Peram

Possible to set the Created_by column value for File Browse?

I'm using database account authentication and then a user gets to upload a file. Then my stored procedure reads the file. I was investigating a problem, happened to search the apex_workspace_files view and noticed the created_by column is always set to APEX_PUBLIC_USER for the files my users upload. Is there some way I can set that value when they log in, so I can track who actually did the upload?
Thanks,
Stew

Dimitri,
I was just using the standard File Browse item, so getting the blob from the workspace view. Though I've seen notes here about loading to your own table, what I had seemed to work (and was done) fairly well. There were just these little features I wanted to use...
Thanks for the suggestion.
Dave, I'm not sure which stored procedure you're suggesting I add the apex_custom_auth.get_username value to? I hoped that the internal File Browse routine would pick up the get_username value automatically instead of the application definition Public User value.
Thanks,
Stew

#*$!%! Can't figure out how REALLY to set the printing defaults so they STICK for everything

PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348
On our 6-month old HP OfficeJet Pro 8500 Wireless A909g, we can't seem to figure out how to set the DEFAULT printing parameters so they really apply to all docs (unless we designate otherwise for a particular doc, of course). When we set them, sometimes they work for the next doc, and sometimes they revert back to an earlier setting.
There seem to be three ways to set parameters for the printer: Properties, Printing Preferences or Printing Defaults on the Advanced tab. (We really thought Printing Defaults on the Advanced tab would do it, since it's so hard to find, but ... NOT.)
My partner thinks it's an HP conspiracy to sell more ink because the reversion is to General with Color (the most ink-intensive, as far as I can figure out). We are trying to fix the machine to start always with Fast-Economical/Black Ink Only. Sometimes it's there and sometimes we have to re-jigger first. We still have to check every time.
Also, I want to fix every job to "Print Back to Front" because the printer shoots out the pages face up. Again, sometimes it's there, and sometimes we have to re-set before the job.
Also, whether we get the default we had set or we re-jigger first, the settings don't stick for every worksheet in an Excel workbook. Or sometimes not even every page.
So, who out there has the 100% foolproof guide to NAILING DOWN THOSE SETTINGS FOR EVERYTHING?
PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348

Locking this accidental double post and directing people to the linked original thread.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Set Radio Group Default Value Based on a Select List Change Event

Apex 4.2
I have a radio group that is source is below. It returns 3 radio group item All,Miv,Courier
SELECT type d, code r FROM vw_lov_depot
WHERE svc_name = :P320_DEPOT
ORDER BY 1
The radio group is only populated when :P320_DEPOT gets a value, this is a select list.
I am trying to set the radio group to default to this value Miv it would use the statement
SELECT type d, code r FROM vw_lov_depot
WHERE svc_name = :P320_DEPOT
and type ='Miv'
ORDER BY 1
I have tried creating a dynamic action on Select list change to populate the default value of the radio group...no joy I also tried a computation. how can I set this default value on when list changed.
Thanks
I have got the default Radio Group Selection working by doing a computation before region on the radio group and calling its select statement and setting the value. But the problem is now I cannot change the radtio group as I do it fire the before region trigger and sets it back to the default value....any help?

Hi,
Could you please create example to apex.oracle.com?
Regards,
Jari

Setting the XML tag value in Java script

Hi,
   I am trying to set a XML tag value in the initialize event of a text field.. The code works fine in FormCalc but I needed it to work in java script.
     FormCalc:
     $record.prospectApplication.typeName = "namedInsured";
     Java Script:
     xfa.record.prospectApplication.typeName = "namedInsured";
     The above JavaScript does not work. Can any one help on this?
Thanks
Srini

Hi Srini,
In JavaScript you don't get any default properties so you need to say;
xfa.record.prospectApplication.typeName.value = "namedInsured";
That is assign the value to the "value" property not the dataValue object.

Setting the right number of thread count

Hi,
What's the right number of thread for a server that has 2 CPU? I know the default setting for Dev is 15 and Production is 25. From what I read in the Performance Tuning Guide, it should be somewhere around the number of CPUs on the machine? Is that right? Or keep the default?

Statement st = con.createStatement();
st.setFetchSize(no_of_rows_here);
ResultSet rs = st.executeQuery(query);Sudha

Workspace Preferences -- Setting the right default values

Similar Messages

Maybe you are looking for