Workspace problem in DW MX 2004

I inadvertently moved the Property Inspector (usually at the bottom of window) around so that it is no longer docked to the document window.
I tried \Window\Arrange Panels to recover the workspace but Arrange Panels was grayed out. I cannot Group the P.I. with the Appication, as all the Group Properties With choices are grayed out.
Currently the top of my P.I. has a small space between it and the bottom of the document window. As a result, the very bottom of the screen just barely shows the line in the P.I. with the link box, which I use all the time.
How can I recover my old workspace or dock the P.I. with the document window so that more of the P.I. is on screen?
Thanks, CMA

Are the changes made in the local sites after you cange the
Library items?
Look at the page locally and see. If the local files are
changed and if you
have uploaded them, then you will see the changes on the
remote site
PROVIDED your have refreshed your browser cache.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ab9hz" <[email protected]> wrote in message
news:fevh6b$ksj$[email protected]..
> I've recently changed from MX to MX 2004 and it's
causing me a few probs.
>
> When i update a library item it seems to have updated on
all the relevant
> pages, however, when I upload the pages to the server
the change to the
> Library
> item doesn't come through.
>
> anyone any ideas why?
>

Similar Messages

Problems Installing Microsoft Office 2004 on 10.4.3!

Hi all,
A friend of mine just purchased 10.4.3 from the Apple Store for use with his G5 (the original single 1.8). My friend is not very skilled with computers, so I have been helping him get 10.4 running.
• We wrote zeros to his hard drive.
• We then did a fresh installation.
• We then ran software update.
• Apps like Photoshop Elements have installed without problems.
Microsoft Office 2004 (Student and Teacher) will not install using the installer or drag-and-drop.
• The installer finishes but the Office 2004 apps are not on the Hard Drive!
• Drag-and-Drop encounters an error (-36 I think) and stops installing.
Obviously, my friend is disappointed that Office will not install on a fresh OS - Please help!
PowerBook G4 Mac OS X (10.4.3)

Hi all,
Templeton Peck may have been correct after all! I just got this message from Microsoft Support moments ago:
Thank you for requesting support for Microsoft Office 2004 for Mac. My name is Mike and I will be working with you to resolve this issue.
As I Understand you are Recieving an Error when installing Office 2004, which is not allowing you to Complete the installation.
With Error 36 There is only one thing to do, you will need to contact our Replacment Product Department for a new disc, you can contact them by calling 1-800-360-7561
Please let me know if this resolves your issue.
Thank you for using Microsoft Technical Support...
I guess I'll give a new disk a try -- I'll report back once I've tried that. :~)
rawbertow789

Snow Leopard Problems with Microsoft Office 2004

I installed Snow Leopard about two months ago. Ever since I have nad problems opening Microsoft Worrd 2004. Every time I try to open Word it hangs up at "Optimizing font menu performance..." Before I installed Snow Leopard I had no problems with any Office 2004 applications. I also have a lot of problems with fonts when I open Safari.

This message occurs whenever your installed fonts change. I work for a publisher so was getting it all the time as I turned fonts on and off for different projects.
In Office 2004, do this:
1. Go to */Applications/Microsoft Office 2004/Office/Support Files/*
2. Rename or move FontCacheTool. (Requires administrator access)
In Office 2011, do this:
1. Go to *~/Library/Preferences/Microsoft/Office 2011/*
2. Delete *Office Font Cache*
3. From Terminal, type touch" then drag in the Office 2011 folder
4. Back in the Finder, do Get Info on the new, empty *Office Font Cache* file. Make it read only and lock it.
Notes:
1. WYSIWYG menus will now just show the font name in standard font.
2. You may be able to disable the 'optimising' message more easily by going to Word's preferences and turning off the 'WYSIWYG font and style menus' tick box in the General section. This takes affect in all Office applications but doesn't seem as reliable at preventing the caching problem.
4. Newly added fonts should still appear when you next start an Office application.
3. However you have Office set up, it can't see certain fonts. They are the ones logged to Console, e.g.:
12/04/2011 09:58:14 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[21782] ATS Font family could not be created for Abaton ITC Std - Legacy Applications may not see this font

SharePoint Foundation 2010 Workspace problem

I've installed sharepoint foundation 2010 in a Windows server 2008 R2 standard environment. I've added some site collections and added some libraries to the site pages. Ive put in various permissions and groups and tested no problem using
Sharepoint workspace 2010 on a Windows 7 32 bit client.
But when I do a remote desktop connection to another server with 2008 R2 standard installed I can't get Sharepoint workspace 2010 to work properly. It opens an account and connects to my sharepont site but in the pane to the right where I would normally
see library documents listed all that comes up is an error stating - Error: Cannot Display Tool.
Also if I try to sync I get the following error:-
The parameter is incorrect
HResult: 0x80070057 (0x386d7565)
Process: Groove.exe (ID:17936(0x00004610))
No amount of googling has found a solution, no similar postings had any resolutions.
Any help would be much appreciated

My apologies. I'd focused on the error and hadn't adequately read the information you provided on the environment. The issue is probably with using SharePoint Workspace on the remote computer, not with SharePoint Foundation.
Here is what I understand you to be doing:
You use Remote Desktop to connect to the Windows Server 2008 R2 computer, where you log in with your domain account, which is a member of the local Users group.
On the remote computer, you start SharePoint Workspace.
On the Launchbar, you click New, click SharePoint Workspace, select your site, and then click
OK.
The workspace is created and appears (from the progress bar) to download content.
When you click Open Workspace, no content is displayed. Instead, you see the "Cannot Display Tool" error.
Is that correct?
There are three areas where SharePoint Workspace is complicated to run remotely:
Where SharePoint Workspace will be run by a user other than the one installing it, it must not be lauched during the installation. This seems the most likely to be the issue, as we have seen the same failure and error at a customer site where several
users had been given a computer image created on a computer where SharePoint Workspace had been launched before image creation.
Only one user should run SharePoint Workspace (Groove.exe) at a time. (Sometimes multiple instances work, but it's not reliable.)
You need to have a local profile on the computer which is running SharePoint Workspace. SharePoint Workspace is not supported with Roaming or Temporary profiles. Usually, this problem would prevent you from starting SharePoint Workspace, but some
environments with custom permissions can lead to other errors.
SharePoint Workspace uses the current user's permissions for SharePoint server access, In the case of Forms-Based authentication, it prompts for credentials at workspace creation, but then uses the credentials in the active browser session when opening
the workspace. I think this could only be related to your problem if you are logged in as another user in your browser, and that user has access to some, but not all, of the site your workspace connects to.

Problem with install TestDrive 2004 on Suse 9.1

I have problems with try install SAP NetWeaver 04 TESTDRIVE 2004 on Suse 9.1
The sapdb-db-files-7.5-2.i386.rpm say this.
error: unpacking of archive failed on file /sapdb/NW4/sapdata/DISKD0001;45e6dbc9: cpio: symlink failed - Imput/output error
The partition have 25GB free
I hope help
Best Regards
Alejandro.

Natalia
the dbmcli -d NW4 -u control,<password> param_getvolsall not work, is possible ?
Suse-SAP1:/ # sdbregview -l
DB Analyzer         /sapdb/programs    7.5.00.10    32 bit    valid
Base                /sapdb/programs    7.5.00.10    32 bit    valid
Loader              /sapdb/programs    7.5.00.10    32 bit    valid
PCR 7403            /sapdb/programs    7.4.03.31    32 bit    valid
PCR 7500            /sapdb/programs    7.5.00.10    32 bit    valid
Server Utilities    /sapdb/programs    7.5.00.10    32 bit    valid
JDBC                /sapdb/programs    7.5.01.00              valid
Database Kernel     /sapdb/NW4/db      7.5.00.10    32 bit    valid
PCR 7300            /sapdb/programs    7.3.00.46              valid
PCR 7301            /sapdb/programs    7.3.01.15              valid
ODBC                /sapdb/programs    7.5.00.10    32 bit    valid
Suse-SAP1:/ #
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -s inst_enum
OK
7.5.0.10     /sapdb/NW4/db
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -s db_enum
OK
NW4     /sapdb/NW4/db   7.5.0.10        fast    running
NW4     /sapdb/NW4/db   7.5.0.10        quick   offline
NW4     /sapdb/NW4/db   7.5.0.10        slow    offline
Suse-SAP1:/ # dbmcli -d NW4 -u control, aksec param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -d NW4 -u control,param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ # dbmcli -d NW4 -u control, sapstar param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ #
Suse-SAP1:/ # xinstinfo NW4
IndepData           : /sapdb/data
IndepPrograms       : /sapdb/programs
InstallationPath    : /sapdb/NW4/db
Kernelversion       : KERNEL    7.5.0    BUILD 010-121-066-665
Rundirectory        : /sapdb/data/wrk/NW4
Suse-SAP1:/ #
Best Regards and thanks for helpppp
Very sorry, but my english is not good.
Alejandro.

Problem when upgrading to 2004s - Table Tree

Hello everyone,
I'm having a problem with a project that i made in 2004 and now i need to migrate to 2004s.
In a view, i have a table with tree using a master column. When i choose o child to process, i do something like this:
     IPrivateTestView.INodeElement select;
     select = wdContext.currentNodeElement();
     IPrivateTestView.INodeElement elem;
     elem = select.currentChildNodeElement();
But in some cases, with 2004s, i get this error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: DataSource attribute of table not valid. [Table Table in view class com.sap.tc.webdynpro.progmodel.generation.DelegatingView]
Anyone can help, or had this same problem ?
        Thank you,
             Nuno

Hi Dzmitry Laptsionak ,
Need your help in Webdynpro Java Using Tree UI.
We need to capture the currently selected node of the tree. We tried using Leadselection as we do in Tables UI but in Tree UI its not giving the currently opened node. We tried using getTreeSelection() method but it returns nothing. Do we need to do some properties setting to use getTreeSelection() method?
Appreciate your response.
Kind Regards,
Nirmal

New problems after installing Netweaver 2004s Portal

After I have installed the Netweaver 2004s Portal, I have noticed there are two problems:
1) a script error is showing on the browser: "htmlb_217_searchForm_htmlbElements' is null or not an object"
2) When I right click on the folder Portal content - It does not show any of the choices that is suppose to show such as to create an new iView; page; workset; roles.
Thanks.

Hi
i think it is something concerned with browser
try the following
IE Browser Settings:
Modifying the client-settings in the IE:
Tools -> Internet Options -> advanced -> http-1.1.settings "use http 1.1through proxy connections".
b. Cache:
Increasing the caching for this particular URL
Also try restarting the server .
Regards,
vijay.
Edited by: vijayakumar kanniah mohan on May 25, 2008 6:00 PM

Photoshop CS5 64 bits Workspaces problem (Win 7 64 bits)

Hello.
Top bottom menu window at right of the screen starts minimized everytime I launch Photoshop, although workspaces (default and personalized) have all the windows maximized.
Is any other user experiencing the same problem?
Although I deleted, bring back the default ones, and created new workspaces, the problem persists.
Please see screen captures attached, thanks.

Try this:
1. Restore the Photoshop window (i.e., click on the middle caption button, so that Photoshop is a window that is NOT maximized).
2. Get the panels looking the way you want them.
3. While the app is still Restored (NOT Maximized), close and reopen Photoshop. Are the panels still the way you want them?
5. If so, maximize Photoshop.
6. Close and Reopen Photoshop. Are the panels still proper?
I've noticed that something is saved when Photoshop is in Restored view that is not saved when Maximized.
-Noel

Mac FTP problem with DW MX 2004

Hi, I've checked the boards on this one and nothing is
working. Checked Passive and Secure FTP and that didn't work
either. This is a problem I only get when uploading somewhat large
(23mb) mp3's. The other smaller files go up easily. Also, when I
upload the mp3's, DW doesn't actually place the mp3 on the server
until I disconnect the connection. Otherwise it will re-upload what
has already uploaded, over and over again, something like a broken
record with a "waiting for the server" for about 30 secs in
between.
Can anyone please help. It is very annoying and not very
efficient use of time. I end up uploading all the files in my
folders by hand, so you can imagine how long it takes.
Thanks In Advance,
Jason

Are the changes made in the local sites after you cange the
Library items?
Look at the page locally and see. If the local files are
changed and if you
have uploaded them, then you will see the changes on the
remote site
PROVIDED your have refreshed your browser cache.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ab9hz" <[email protected]> wrote in message
news:fevh6b$ksj$[email protected]..
> I've recently changed from MX to MX 2004 and it's
causing me a few probs.
>
> When i update a library item it seems to have updated on
all the relevant
> pages, however, when I upload the pages to the server
the change to the
> Library
> item doesn't come through.
>
> anyone any ideas why?
>

Edit Workspace Problem

How do I get my photo in the edit work
space over to the far left?. I can't get it out of the mid
dle of the workspace. It makes it very difficult to use my rulers when cropping?

Barb B.,
Thank you for your response. However, I tried to do what you said. I can't seem to get the part about ripping the tab (what tab?) of the image down from the top of the workspace. Please understand when it comes to this particular software I'm a little slow. I really appreciate your trying to help me with this problem. I'm sure the problem is me. Thanks again.

Problems with installing Netweaver 2004s SR1 Developer Workplace with MS

I get the following errors when I try to install Netweaver 2004s SR1 Developer Workplace with MS SQL Server:
saploc does not exist
FJS--0003 TypeError: this._name has no properties in script NW_Workplace

Hi
I think you must be geting this error soon after givening the java cd path.If this is true then the problem is with your JDK.Usually this kind of error appears during the installation if there is some incompatibility between what is required and written in the instaaltion scriot and what actually you have installed(i mean version incompatibility also)
Please make sure that you have taken correct CD's and JDK
Reward points for my explanation if it is useful for you

Workspace problems, please help

When I start Indesign, the only window pane I see is the application bar, but it only takes up half the screen. When I toggle through the workspace presets, nothing changes or appears. If I choose to show a specific window pane such as "layers", it appears in the center of the screen but is stacked with a bunch of other random window panes (but in a way unlike you would normally see when you drag a window into another, they are lieterally inside one another). I can however, drag them out and rearrange them, but when I relaunch ID, the same problem appears. I've tried trashing the prefs to no avail. Any ideas?

have you tried the Reset <workspace name> command?
if that works to rearrange the panels properly, and it doesn't stick, then you probably have a conflict with some other software. Any third party plugins? Background utilities?

Build option export to different workspace - problem

Hi All,
I have a page with two regions. Logically, the two regions are mutually exclusive, only one should ever appear. I've created a build option called "Simulated Login" and set the build option of region 1 to "{Not Simulated Login}" and the build option of region 2 to "Simulated Login". When I run the page and the build option is excluded, I see only region 1. When the build option is included, I see only region 2.
I have a problem when I export my application to another workspace. Region 2's build option is still set the same as the original application, but region 1's build option is not set after the import - it should be "{Not Simulated Login}" but instead it is blank. Now, when I run the page and the build option is excluded, I see only region 1 and when it's included, I see both regions.
In the meantime I'll create another build option as the obvious workaround - I'll just have to make sure that I keep the two build options set to the opposite of eachother!
Application Express 3.0.1.00.07. Database: 10.1.0.5.0 - Production
Regards,
Jerry

For anyone that's interested, I think I've got it...
In the export file I can see the build option:
--application/shared_components/logic/build_options/simulated_login
wwv_flow_api.create_build_option (
p_id=> 123207604215572408 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_build_option_name=> 'Simulated Login',
p_build_option_status=> 'EXCLUDE',
p_default_on_export=>'EXCLUDE',
p_build_option_comment=> 'When this build option is enabled...');And the two regions:
wwv_flow_api.create_page_plug (
p_id=> 123523626092022134 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_page_id=> 101,
p_plug_name=> 'Region 1',
p_region_name=>'',
p_plug_template=> 239523132600564333+ wwv_flow_api.g_id_offset,
p_plug_display_sequence=> 10,
p_plug_display_column=> 3,
p_plug_display_point=> 'AFTER_SHOW_ITEMS',
p_plug_source=> s,
p_plug_source_type=> 'STATIC_TEXT',
p_translate_title=> 'Y',
p_plug_query_row_template=> 1,
p_plug_query_headings_type=> 'COLON_DELMITED_LIST',
p_plug_query_row_count_max => 500,
p_plug_display_condition_type => '',
p_plug_customized=>'0',
p_plug_caching=> 'NOT_CACHED',
p_required_patch=> '-123207604215572408' + wwv_flow_api.g_id_offset,
p_plug_comment=> '');
wwv_flow_api.create_report_region (
p_id=> 123527026425025070 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_page_id=> 101,
p_name=> 'Region 2',
p_region_name=>'',
p_template=> 239523132600564333+ wwv_flow_api.g_id_offset,
p_display_sequence=> 20,
p_display_column=> 3,
p_display_point=> 'AFTER_SHOW_ITEMS',
p_source=> s,
p_source_type=> 'SQL_QUERY',
p_display_error_message=> '#SQLERRM#',
p_customized=> '0',
p_translate_title=> 'Y',
p_query_row_template=> 239534019006572870+ wwv_flow_api.g_id_offset,
p_query_headings_type=> 'COLON_DELMITED_LIST',
p_query_desc_image_attr=> 'width="10" height="11" alt=""',
p_plug_query_strip_html=> 'Y',
p_required_patch=> '123207604215572408' + wwv_flow_api.g_id_offset,
p_comment=>'');The build option has the ID: 123207604215572408 + wwv_flow_api.g_id_offsetRegion 1 has the parameter: p_required_patch=> '-123207604215572408' + wwv_flow_api.g_id_offsetRegion 2 has the parameter: p_required_patch=> '123207604215572408' + wwv_flow_api.g_id_offsetSo the {Not <Build Option Name>} is stored as the negative of the build option ID. I manually changed the export file so that Region 1 has the parameter:p_required_patch=> '-123207604215572408' - wwv_flow_api.g_id_offsetSo I subtract the offset for the build option on Region 1. Then I imported it and it worked correctly.
Think this is a bug in Apex!
Jerry
Edited by: Jerry Ahern on Jan 9, 2009 3:29 PM

Problems with microsoft office 2004

I have microsoft office 2004 installed on my macbook and excel and powerpoint no longer open. Word still works but when I try to open excel or powerpoint from the dock, a question mark appears and if from applications it doesnt exist. What could have happened and how can I fix it? Please help!

This message occurs whenever your installed fonts change. I work for a publisher so was getting it all the time as I turned fonts on and off for different projects.
In Office 2004, do this:
1. Go to */Applications/Microsoft Office 2004/Office/Support Files/*
2. Rename or move FontCacheTool. (Requires administrator access)
In Office 2011, do this:
1. Go to *~/Library/Preferences/Microsoft/Office 2011/*
2. Delete *Office Font Cache*
3. From Terminal, type touch" then drag in the Office 2011 folder
4. Back in the Finder, do Get Info on the new, empty *Office Font Cache* file. Make it read only and lock it.
Notes:
1. WYSIWYG menus will now just show the font name in standard font.
2. You may be able to disable the 'optimising' message more easily by going to Word's preferences and turning off the 'WYSIWYG font and style menus' tick box in the General section. This takes affect in all Office applications but doesn't seem as reliable at preventing the caching problem.
4. Newly added fonts should still appear when you next start an Office application.
3. However you have Office set up, it can't see certain fonts. They are the ones logged to Console, e.g.:
12/04/2011 09:58:14 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[21782] ATS Font family could not be created for Abaton ITC Std - Legacy Applications may not see this font

Multiple Adobe Premiere CS6 workspace problems Win 7

Here's a screenshot of my workspace [img]http://i.imgur.com/jseNN6c.jpg[/img] to help to describe the problems I'm facing.
1. Why can't I get the top right pane to match the top left's aspect by default?
After madly mouse clicking around the top right pane image crosshairs come up and I've managed to manually adjust the image onto a black background, see this screenshot [img]http://i.imgur.com/m2CccdH.jpg[/img]
And after all this fuss I'm worried my output video quality will not be the crisp resolution of the left hand frame, but the much more blurry right hand pane.
2. I'm trying to insert keyframes with stuff like people's names.
Adobe help keeps on telling me to locate a 'wrench shaped' icon in the bottom timeline frame - I can't find one and continue following the keyframe instructions.
3. If I undock a panel, and say drag it across my extended desktop to my second screen - how do I re-dock it? Can see an undock command but not a re-dock?

Hi,
After looking at the screenshot of the issue you have, I can say that you have not selected the correct sequence settings.
After Import all the clips in Premiere Pro please right click on one of the clips and choose the option "New Sequence from Clip". It will create a new sequence for you with the correct settings and you will have full image on the program monitor as well.
Hope that helps.
Thank you,
Mohd Naseem

Workspace problem in DW MX 2004

Similar Messages

Maybe you are looking for