Workspace URL parameter issue!

I have an URL like this:
http://localhost:8080/workspace?startEndpoint=HelpDeskProcess.InitiationForm
The process name is HelpDeskProcess and the endpoint name is InitiationForm
But when I type this URL in browser it opens workspace but shows an error "Invalid endpoint Id".
Any suggestions?
Nith

Hi Vikas,
version is LiveCycle ES2 (9.0.0.0) and SP1 not updated.
Process is deployed and running on server.
ps: the process is placed under a application folder named workflows. Is that cause this issue?
Nith

Similar Messages

ABAP -WebDynpro - Read URL Parameter

Hi,
We have a Custom 'Catalog' that needs to be called from SRM using OCI (Open Catalog Interface). We are developing this custom catalog using ABAP Web Dynpro. We have following issues because of which we are unable to communicate back to Shopping cart from the Custom Catalog:
1. Unable to read the value of 'HOOK_URL' in WebDynpro application. We need this value so that it can be used as Exit URL. How and where do we read this URL parameter in ABAP WebDynpro ?
2. How can we return the 'HTML Form' to SRM with the values from Custom Catalog to fill the shopping cart ?
I would appreciate your help...
Thanks
Meenal

Hi Menal,
I had the same problem.
Did you define the HOOK_URL parameter in your webservice ? If not, do this 1st.
2nd
In you Webdynpro read the HOOK_URL in your handledefault method your window. Store it e.g. as attrribute in you assistance class.
method handledefault .
*&- Add FOF and HOOK_URL to assistanceclass attributes
wd_assist->hook_url = hook_url.
endmethod.
After this you can read your HOOK_URL e.g in a view via:
concatenate 'HOOK_URL=' wd_assist->hook_url zlv_hook_url into zlv_hook_url
I hope your question is answered.
What I want to now is: How to controll the HOOK_URL so that the formfields of the extenal catalog is added to the shopping card. Do you now that ?
John

Call View controller with some URL parameter

Hi
I have a 3rd party system which need to send some data to my CRM system.
One approch which is being suggested is by sending data by URL parameter.
I have made a new component for this and have provided the 3rd party with its URL .
The issue with calling a view controller URL along with some specific URL parameters is that i am not able to access its parameters.when i call method GET_PAGE_URL from the DOINIT method of the controller it does not provide me with the parameter list .
How can i access these URL parameters ?
Regards
Ajitabh

HI,
have a look at component CRM_UI_FRAME. In the page default.htm they extract URL parameters.
You have got the REQUEST variable in your view controller as well.
cheers Carsten

Different behavior when URL Parameter clientDebug is set

Hi experts
I'm facing a strange behavior in my WebDynpro application.
Whenever I launch it with the URL parameter sap-wd-clientDebug set to X the interactiveForm element on one of my views works flawlessly (i.e. the assigned context nodes on my view get updated on each roundtrip and changes in the context are reflected in the interactiveForm). When sap-wd-clientDebug is not set however the interactiveForm still communicates with the WD (a breakpoint in a dummy OnSubmit action is triggered correctly when the submit button on the interactiveForm is pressed) but contex changes are no longer reflected in the interactiveForm. Only after navigating back and forth between my views does the interactiveForm get updated.
Any hints or ideas on how to solve this issue would be great.
ADS Version: 800.20090130093518.519793
Verion of ZCI Script: 802.20090903061432.597600.590319
Only the attributes dataSource and templateSource of the interactiveForm element are set.
Regards
Chris

any clue ???

Missing URL parameter: IterationId

Error: Missing URL parameter: IterationId
I get this error when I add a footer to my report. Is there a fix?
Report viewer 2010
Visual Studio 2008 sp 1
.Net 3.5
Browser = firefox, have not tried ie.
IIS = whatever ships with Windows 7 prof.
Thanks,
Sam

(Apologies for bumping this old, old thread; it was the first hit in Google when searching for this problem myself, so I thought I'd post how I resolved my issue in case others stumble upon it.)
Are you sure this is just from adding a footer? I was getting this error message myself, and it was due to the Line control. For whatever reason, the Line control tries to include a standard blank image right after it, but the URL is missing
that parameter in FireFox and Chrome (but not IE, as far as I can tell). When I remove all the Line controls, the error goes away. Make sure you don't have any Lines in your footer (or anywhere else on your report, for that matter.)

How to change the fields in a JSF form based on a URL parameter

I am trying to build a generic JSF form of parameters which I want to dynamically change (i.e.
change which field is visible, what the label text should be, etc) based on a URL parameter.
I can set the fields using logic in the backing bean as an action on a command button pressed.
But how do I do it based on the URL parameter ? I can retrieve the URL parameter but I
don't know where to put (or hook) the Java code to do this initialization prior to
the page being rendered for the first time.
The fields in the JSF is being configured dynamically using a database table.
BTW I am using Jdeveloper 10.1.3.5
Thanks
CK

Thanks. I decided to set a Session bean to store the value of the URL parameter (if it is set)
and then to use the session bean to initialize the attributes of the fields on the JSF Page.
There also seems to be some caching of the inputText fields (i.e. it reverts back to the first
initialized value) even though I tried to change it using the URL parameter in the requestScope
backing bean. So, setting the values into the Session bean and retrieving it back from there
seems to be more reliable.

How can I pass URL parameter value to text field?

Dear Masters,
I have a text field. I want it to have a value based on the URL parameter, for example:
http://myapplication.net:7777/pls/apex/f?p=102:1:::::P1_RTNUM:9448,P1_EMAILADD:email.add.here
I want the value of the text field = P1_EMAILADD after the form was loaded. Also, please have it read-only.
Thanks a lot.
Edited by: user6368519 on Sep 16, 2009 11:39 PM

Thanks Saad,
Can I email you(I would need your email) for any concerns or just create a new thread for you to look?
This is ok now. I'm sorry but I just marked this one as an "answered" one last time.
Thanks for all the help again I appreciate it. ;)
Thanks,
Aaron
[email protected]

How can I pass empty value in URL Parameter

Hi,
I am passing different URL parameters to one page, to filter
the recordset on that page. How can I pass an empty value in the
URL parameter so that the recordset in unfiltered?
The URL parameter is based on one field of the database:
ContentType. So, the link would be to
default.asp?ContentType=Event
and then all records that have the ContentType field in the
DB as Event are displayed. Is it possible to use this system to
pass an empty parameter so that all records are displayed?
Thanks
Ian

?ContentType=All
<% if (ContentType == "All")
Build recordset w/o filtering
ASP is rusty, but those are the basics.
"iandobie" <[email protected]> wrote in
message
news:e8im80$q7m$[email protected]..
> Hi,
> I am passing different URL parameters to one page, to
filter the recordset
> on
> that page. How can I pass an empty value in the URL
parameter so that the
> recordset in unfiltered?
> The URL parameter is based on one field of the database:
ContentType. So,
> the
> link would be to
> default.asp?ContentType=Event
> and then all records that have the ContentType field in
the DB as Event
> are
> displayed. Is it possible to use this system to pass an
empty parameter so
> that
> all records are displayed?
> Thanks
> Ian
>

How can I add a url parameter to choose the right database row to delete using php in Dreamweaver CC

Hi all,
I have just upgraded to Adobe Creative Cloup. Though I find it very good there was one flaw and that was the omision of the database section. I got this sorted but now I find that once I have set up the connection to the database and want to eithger delete or update records there is no 'url parameter' button to do so. Can someone advise we how to get round this.
Seasons Greatings from
David J

The link will look similar to
myPage.php?ID=myVariable

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

How to catch URL parameter from Portal URL in Web Dynpro iView

Hi All,
I have a web dynpro application running as a portal iView successfully. Now the client wants to make it internationalized with 7 languages. Currently they access the portal - and via role assignment they get to the portal tab with the wd iView. Now they want to send a parameter for the language key with the portal URL. So when they are typing in http://myportal.mydomain.com now they want to type in http://myportal.mydomain.com?sap-locale=de or so. My question is how can I catch this parameter in the WD application when it is running inside a portal iView? Is it at all possible?
I have written a very small application which is trying to catch a URL parameter named PARAM. The code I have written is the default one as below:
String paramValue = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("PARAM");
When I run the application standalone and add the PARAM=something in last of the URL I can catch it. But when I create an iView and while previewing it I add the same PARAM value it is coming as null all the time. Same when I add this iView to a role and show it via role assignment in protal. Please help to let me know how to achieve this. I think if I can read the parameter value from Portal URL in the WD iView - then I can set it as the default locale of the application and then show language specific file to achieve internationalization.
Your urgent help will be highly appreciated.
Warm Regards,
Shubho

Hi Shubhadip
Even if you get the parameters, how do you internationalize your application? Are you not following the standard way as described in the following link. In this case you never need to capture any such parameter. This is done by the WD runtime automatically .
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/f4/d95664da179b4db731e21c2e470b72/frameset.htm">Internationalization of WD projects</a>
You can retrieve application parameters specified at the creation of iview by "adding parameters(with the same name as in iview application parameters) to the default plug of the Component Interface View of the WD application". "onDefaultPlug" method of the interface view controller you get these values as parameters, which you can save in the context node of component controller for later use.This is guaranteed to work.
But again this is not what you want exactly. You want the user to specify the value at runtime. If you have just 7 languages, you can create 7 set of iviews with different application parameter value indicating language key, and assign to 7 different set of roles, each representing one set of users with common language.
I hope you find a solution.
Regards
kk

How to pass mysql query id through url parameter to a detail page

Hi there,
I am a newbie to JSP and I am trying to pass a url parameter to a detail page so that it will query a mysql data query to show the details of that query. How can I write the query on the details page so that it will display the query results on the page. eg select * From data Where = "passed_url parameter_ value". Please i need urgent help on this please.

<Acknowledged>
which should be strongly cautioned against even for "newbies".
</Acknowledged>
Right, but the code you posted will "work" in a very harmful wayNot always, I used normal Statements last year and I had no problems.
Even with pretty capible code brakers trying to cause $h!t with my application.
Just check for invalid datatypes, and for SQL Injections remove stuff like ' or replace with `
But yes PStat... are the better way.

URL parameter to a detail page

Hello,
I a m having trouble with my url parameter which is not fetching the correct record. The code works - and returns a word title and description; but it returns only the top record no matter which link is used. Please help.
1. I have a master page with three url links which are sent to the detail page:
<p><a href="sprydetail.html?word=integrity">integrity</a></p>
<p><a href="sprydetail.html?word=voice">voice</a></p>
<p><a href="sprydetail.html?word=argument">argument</a></p>
The sprydetail.html page looks like this:
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryURLUtils.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<div spry:region="ds1">
<h1>{word}</h1>
</div>
<div spry:region="ds2">
<p>{description}</p>
</div>
</body>
My xml file looks like this:
<tagwords>
<tagword>
<word>Integrity</word>
<description><![CDATA["in·teg·ri·ty [in-teg-ri-tee] Show IPA noun 1. adherence to moral and ethical principles; soundness of moral character; honesty. 2. the state of being whole, entire, or undiminished: to preserve the integrity of the empire. 3. a sound, unimpaired, or perfect condition: the integrity of a ship's hull."]]></description>
</tagword>
<tagword>
<word>Voice</word>
<description><![CDATA["voyss [voyss] Show IPA noun"]]></description>
</tagword>
<tagword>
<word>Argument</word>
<description><![CDATA["arg-u-ment[arg-u-ment] Show IPA noun"]]></description>
</tagword>
</tagwords>

1. I have a master page with three url links which are sent to the detail page:
<p><a href="sprydetail.html?word=integrity">integrity</a></p>
<p><a href="sprydetail.html?word=voice">voice</a></p>
<p><a href="sprydetail.html?word=argument">argument</a></p>
Please remember that the URL variables are case sensitive, ie if the variable that you are looking for is Integrity then the variable cannot be integrity.
The sprydetail.html page looks like this:
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryURLUtils.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<div spry:region="ds1">
<h1>{word}</h1>
</div>
<div spry:region="ds2">
<p>{description}</p>
</div>
</body>
Change the above to
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
<div spry:region="ds1">
<h1>{word}</h1>
</div>
<div spry:detailregion="ds1">
<p>{description}</p>
</div>
<script src="SpryAssets/SpryData.js"></script>
<script src="SpryAssets/xpath.js"></script>
<script src="SpryAssets/SpryURLUtils.js"></script>
<script>
var params = Spry.Utils.getLocationParamsAsObject();
var ds1 = new Spry.Data.XMLDataSet("myxml.xml", "tagwords/tagword[word ='"+params.word+"']");
</script>
</body>
</html>
First of all I prefer having the JS at the bottom of the document, not absolutely required. Next I have gone for one dataset showing a region and a detailregion. I have also extracted the URL variable placing this into params, the individual value params.word has been used in the xPath definition.
Gramps

How to get value of URL parameter

Hi,
If an ABAP Web Dynpro URL looks like this: http://<server>:<port>/sap/bc/webdynpro/sap/zny_test1?sap-client=100&sap-language=EN, how to get value of the URL parameter sap-client at runtime in the application?
Thanks,
Nancy

The framework currently strips all the framework specific params.
Perhaps the will be made available in a future release. Thomas, any comments ?
However, I dont understand the requriement to know the sap-client URL value.
If your code is running, a user has successfully connected to system a therefore he has a session open and this session is associated with exactly 1 client at any point in time.
See SYSTEM VARAIBLE SY-MANDT.
this represents the client in which the users session is running and negates the need to see
sap-client URL value.
regards
Phil.

HTTP Sender - how to read URL Parameter USER id into Mapping

Hi,
My scenario is HTTP - XI - ABAP Proxy.
I wanted to capture USER id of the person who posted(HTTP) into XI(Mapping). How to read/evaluate the value of sap-user from querystring of URL ?
http://HOST:8008/sap/xi/adapter_plain?namespace=http%3A//abc.com/sales_oa&interface=MI_sales_OA&service=DEV_D&party=&agency=&scheme=&QOS=EO&<b>sap-user=SM9999</b>&sap-password=xxxxx&sap-client=001&sap-language=EN
please help.

Mallik,
Try URL Parameters in HTTP sender communication channel.
In the sender communication channel set Adapter Specific Message Attributes. Click on Apply URL Parameters. In Parameter1 put sap-user (U can query any URL parameter by giving its name as in the HTTP URL).
Now in SXMB_MONI, in inbound payload SOAP Header, under Dynamic configuration u can see the value of the user. Query the same in Mapping using Dynamic Configuration using keyName as UrlParamOne.
Regards,
Sudharshan N A
Message was edited by:
Sudharshan Aravamudan

Workspace URL parameter issue!

Similar Messages

Maybe you are looking for