Workspace

My photoshop window/workspace is 'glued' to the top and left hand sides of my screen obscuring some of the options at the top and hiding the tools. I have tried a variety of things to 'unglue it' but none of them have worked. Any suggestions gratefully received. Thank you

I still have one of those darkened rooms but it hasn't been used since 2011 even though I still plan on using it again...
I discovered that at some point Photoshop allowed the application frame to be dragged to another monitor - I had tried doing that when I added the Cintiq last year and it wouldn't let me, so that's when I started switching the menu bar in System Prefs to make the Cintiq my main monitor so Photoshop would open on that screen, and then I had a special workspace set up for it that I switched into. It worked fine until a few weeks ago when the application frame slipped up under the menu making the options inaccessible.
Today, when I discovered that the application frame could be dragged to another monitor without changing anything in System Prefs, I was able to set it to fit that monitor using the green dot to maximize the working area (if you're not on Mac, I don't know the equivalent). Working that way is not as convenient ad switching the monitor priority in System Prefs and since I was able to kind of reset the application frame, I left it there, quit Photoshop and went back to System Prefs and did the same monitor-switch thing I've been doing for the past year. This time, everything was fine and the options were no longer under the menu bar.
I think what happened to me was that I left the workspace I had set up for using the Cintiq in place and used it on my main, larger, monitor which allowed me to maximize the application frame for the larger size and stayed that way when I returned to using it on the Cintiq screen. I got lazy and didn't bother to switch to the workspace I had set up for my larger monitor. I have three displays and use two (the main one in the center and a smaller one to the right for tool palettes) for most of the work. When I need to use the Wacom Cintiq for detailed work I have a workspace that puts everything onto that one screen, without using either of the other screens. I think I may be a bit obsessive... Or just an old hippie artist who somehow broke ranks with his generation and embraced the digital world.

Similar Messages

  • OEPE causes Eclipse Kepler to start with wrong workspace, overrides Eclipse's workspace configuration

    I'm a new OEPE user, and found that after installing it, Eclipse (Kepler) now starts up with the wrong workspace every time. I have to explicitly do File > Switch Workspace... to get Eclipse to restart with the correct workspace. Also, the workspace I want to use is the only one listed in the Workspaces preferences panel (Window > Preferences > General > Startup and Shutdown > Workspaces). So I can't figure out why Eclipse is using the wrong workspace, and why it's even finding this wrong one.
    I found that many other users of OEPE with Kepler are having this same problem:
    Eclipse Community Forums: Eclipse Platform » Kepler: On start up, I no longer get prompted for workspace locat…
    And this sounds curiously like this old problem reported right here on the OTN Community site:
    https://forums.oracle.com/thread/2191740
    Any suggestions for how to get around this? I assume this is a bug, but don't know the correct process for reporting OEPE bugs.

    77e559c0-cd28-48cd-916f-3f755e9683b5 wrote:
    Hi.
    I suspect that some action by the OEPE code somehow modifies the OSGi Cache so that it no longer asks you what workspace you'd like to use (and forces usage of the workspace in top user directory.)  I found that if you put in "-clean" in your eclipse.ini, then you get asked what workspace you'd like to use.  This flag clears out the OSGi cache (hence my theory that it is this cache that is messed up)
    That said, there are arguments for not doing this all the time.  See this discussion: java - How to run eclipse in clean mode? and what happens if we do so? - Stack Overflow
    Finally, I suspect you have another workspace on your system now.  Presuming you are on a PC, go to your user dir - I'd wager there is a "workspace" dir there now.  That is where OEPE wants to work.
    Good Luck!
    OEPE should be able to work with any workspace; it has in the past!  If a specific workspace is required with this release, that is a step backward in my opinion.  That said, if that is the direction of the product, so be it.  I find it hard to believe that is the direction of the product, however!

  • SharePoint Foundation 2010 Workspace problem

    I've installed sharepoint foundation 2010 in a Windows server 2008 R2 standard environment. I've added some site collections and added some libraries to the site pages. Ive put in various permissions and groups and tested no problem using
    Sharepoint workspace 2010 on a Windows 7 32 bit client.
    But when I do a remote desktop connection to another server with 2008 R2 standard installed I can't get Sharepoint workspace 2010 to work properly. It opens an account and connects to my sharepont site but in the pane to the right where I would normally
    see library documents listed all that comes up is an error stating - Error: Cannot Display Tool.
    Also if I try to sync I get the following error:-
    The parameter is incorrect
    HResult: 0x80070057 (0x386d7565)
    Process: Groove.exe (ID:17936(0x00004610))  
    No amount of googling has found a solution, no similar postings had any resolutions.
    Any help would be much appreciated
      

    My apologies. I'd focused on the error and hadn't adequately read the information you provided on the environment. The issue is probably with using SharePoint Workspace on the remote computer, not with SharePoint Foundation.
    Here is what I understand you to be doing:
    You use Remote Desktop to connect to the Windows Server 2008 R2 computer, where you log in with your domain account, which is a member of the local Users group.
    On the remote computer, you start SharePoint Workspace.
    On the Launchbar, you click New, click SharePoint Workspace, select your site, and then click
    OK.
    The workspace is created and appears (from the progress bar) to download content.
    When you click Open Workspace, no content is displayed. Instead, you see the "Cannot Display Tool" error.
    Is that correct?
    There are three areas where SharePoint Workspace is complicated to run remotely:  
    Where SharePoint Workspace will be run by a user other than the one installing it, it must not be lauched during the installation. This seems the most likely to be the issue, as we have seen the same failure and error at a customer site where several
    users had been given a computer image created on a computer where SharePoint Workspace had been launched before image creation.
    Only one user should run SharePoint Workspace (Groove.exe) at a time. (Sometimes multiple instances work, but it's not reliable.)
    You need to have a local profile on the computer which is running SharePoint Workspace. SharePoint Workspace is not supported with Roaming or Temporary profiles. Usually, this problem would prevent you from starting SharePoint Workspace, but some
    environments with custom permissions can lead to other errors.
    SharePoint Workspace uses the current user's permissions for SharePoint server access, In the case of Forms-Based authentication, it prompts for credentials at workspace creation, but then uses the credentials in the active browser session when opening
    the workspace. I think this could only be related to your problem if you are logged in as another user in your browser, and that user has access to some, but not all, of the site your workspace connects to.

  • Unable to open web analysis reports through workspace

    Hi,
    I am connecting web analysis with MSSQL server 2000 and generating reports. I am using essbase 9.3.1 version.
    But my problem now is that I can just open these reports from web analysis studio and cannot open them from workspace. In workspace, if I right click on the report and open it from web analysis studio it does open. But it does not open by double clicking the report in workspace. It just shows a blank report on just parts of the report.
    The issue is only there for the reports that are getting data from relational db (MSSQL server 2000). The other reports that are using the cube data are fine and opening from everywhere.
    Are there any other configuration settings involved in order to open a web analysis report(that uses relational db) from workspace?
    Thanks in advance,
    John

    Hi Atul,
    Try using the in built config checker:
    http://localhost:16000/WebAnalysis/config
    This has several tests you can perform to see what's running.

  • How do I get bridge CS5 to open up with my saved workspace settings?

    Every time I open bridge it opens with large thumbnails in an old folder.  I have to "reset" my workspace (even though it is highlighted at the top of the page already!) and then select the last folder I was working on again.
    Is there any way to get bridge to remember your last used folder and last used workspace setting and just re-open with those already set?
    The  current situation just leads to lots more unnecessary annoying clicking.
    I've tried all the options I can find in preferences and tried creating ans saving different workspace settings but nothing seems to effect how bridge opens up the first time I use it in a session.  I am running it on Windows 7.
    Thanks,
    Clive

    That seems to solve it.  I think your point about exiting bridge before shutting down is important, but you need to make sure bridge is showing the set-up you want to keep first.  I now have a sensible opening screen. Thanks a lot.

  • Error while creating a workspace and workspace user

    Hi Everyone
    I have installed oracle 11.1.0.7 on our server and the os is windows server 2008. I tried creating a new workspace and workspace user using the repository assistant on the server itself i mean i am using OWB which comes along with the 11g database. It is installing 60% and at the end it gives me this error:
    The warehouse builder workspace installation failed Java.Sql.SQLexception ora -00942 table or view does not exist
    How can i deal with this error? any suggestions ?
    Thanks & Regards
    Subhasree

    Hi everyone,
    I got the same problem. It is very urgent to get an answer.
    Thanks
    Siegwin

  • Proxy error while running the financial report in workspace.

    Hi,
    We are using the Hyperion financial reporting 9.3.1 with Essbase as a data source.
    While running a report in workspace, we are getting the 'Proxy error' meassage, which is following-
    "<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
    '<html><head>
    <title>502 Proxy Error</title>
    </head><body>
    Proxy Error
    <p>The proxy server received an invalid
    response from an upstream server.<br />
    The proxy server could not handle the request <em><a
    href="/hr/modules/com/hyperion/reporting/web/reportViewer/HRRunJob.jsp">GET /hr/modules/com/hyperion/reporting/web/reportViewer/HRRunJob.jsp</a></em>.<p>
    Reason: <strong>Error reading from remote server</strong></p></p>
    </body></html>"
    Do anybody have any idea on this? Any help will be appriciated on this.
    Thanks & Regards,
    Mohit Jain

    Hi Iain,
    We are using Microsoft Internet explorer 6.0. I am not sure about the 'proxy' (As we don't have any proxy setting in Tool--> Internet options--> connection--> LAN setting). We are accessing the Workspace and FR studio via Citrix application. How can I check the proxy.
    Also, I noticed one more point, Report has prompt for seleting 'Account hierarchy'.If we run the report only for one account hierarchy, report is returning the data but while running for multiple account hierarchy, it is throwing the 'Proxy error' as memtioned above.
    Please help us on this.
    Thank & Regards,
    Mohit

  • Error while running the financial report in the workspace.

    Hi,
    Im getting the below error while running the financial report in the workspace in HTML mode.
    *"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
    And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
    *"You are not authorized to use this functionality. Contact your administrator"*
    Can someone let me know how to resolve this error.

    You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
    1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
    2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
    If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
    3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
    http://workspaceServer:19000/hr/status.jsp
    http://frWebAppServer:8200/hr/status.jsp
    Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
    If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers.

  • HTTP 500 error while opening pdf report in Workspace

    Hi all,
    i have a HFM - FDM - Financial Reporting 11.1.1.3 installation at a custommer that is working fine.
    Except for the fact that when i open a report (doesn't matter if it's from the studio or workspace) in pdf it gives an HTTP 500 internal server error.
    I can open the report in HTML withous any problems.
    I really don't have a clue where to search. Has anyone a suggestion?
    Thanks in advance,
    Marc

    The above registry fix worked for me, however, I wanted to clarify the registry key to edit, since I think the poster above me forgot one of the folders:
    Regedit - > HKLM -> SOFTWARE -> Hyperion solutions -> HReports -> JVM ->JVM option 2 -> default is -xmx256m
    The bolded part above was added to clarify
    This fix can also be found in the Oracle KB, under the article name:
    Error: "Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format [ID 1111367.1]

  • While running a report through workspace getting "Null" error

    While running a report through workspace i am getting "Null" error.i have checekd the db connection and also access to hfm.
    Thanks

    Hi Raj,
    There are a few OSS Notes for your issue.
    If your Query has hierarchy in it then check 734184
    If your query is based on Infoset then check Note 784502 and 701941.
    Also check 668921.
    Bye
    Dinesh

  • My workspace turned white and I need to change it back to the gray that it usually is

    How do i change my workspace that has turned white back to gray?

    In most versions of PSE when you right click on the work area it is possible to reset to default, as well as other colors. Hope that it work for you.

  • BPM Application Link does not appear in BPM Workspace (11.1.1.7)

    I spent huge amount of time to reveal why does that happens.
    All that follows further is valid for BPM Suite 11.1.1.7.
    The scenario.
    You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
    But the application link did not appear in BPM Workspace.
    Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
    At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
    The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
    Else the Appication Link will not appear.
    One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
    The second find is a bug (is think so).
    If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
    If you look to organization.xml you will see something like this:
            <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
                <ns5:name>StartTask.InitRole1</ns5:name>
                <ns1:processRole id="InitRole" name="InitRole1"/>
            </ns1:applicationRole>
    The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
    When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
    After that "applicationRole id" != "applicationRole name" and the Link does not appear.
    How to fix?
    Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
    That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
    Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
    In that case the associated swimlane will have the same name as the "applicationRole id".
    Hope this helps somebody
    Oleg

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • BPM Process Creation Error While Viewing in BPM Workspaces

    Hi,
    I am working in creating workflows in BPM according the Organizational need. I just have started to do so. But, While i have create and deploy a simple Process in JDeveloper 11.1.1.6.0, the process is deployed successfully. When, I login into BPM/Workspaces User, Application which, i have developed earlier is shown there but when i open this application, there is nothing to display in Browser Only empty window is open. Can anybody provide useful suggestion to resolve this issue. I will waiting for your response. Thanks.

    See the last post in this thread (adding application URL to the composite)-
    Re: Binding ADF Components in Task Form
    Also as mentioned earlier check your logs if any other error is causing the blank page

  • BPM roles not avaialable in BPM workspace

    Hi ,
    I am facing an issue with the BPM workspace. I deployed my BPM process in my SOA server. But I am not able to view the roles defined in my BPM application in BPM workspace. I can muanuaaly add the role under Application Roles in Fusion Middleware control by adding <composite_name>.<role_name> but I don't want to do this. I want the roles to be avaialable automatically when I deploy my BPM application. Can you please suggest me the cause of this issue and a probable solution?
    Thanks in advance!

    Hi Roshni,
    How did u added the roles .
    Generally You/Admin has to create the Applications Roles/ Users, Groups before developing the BPM Process.
    Once U created, For Human Activity/Task you will be assigning the roles like Manager, Supervisor, etc.
    Then you need to login to the BPM Workspace using same role and password so that you can Complete the tasks assigned to particular role...
    Hope this might help you..
    Regards,
    Pavan

  • Can not open hfm application in Workspace

    When try to open HFM application from Workspace, application failed to open, errors pop up as below fyr, pls help:
    --------------01----------------------------------------------
    An error occurred processing the result from the server. Description: Invalid or could not find module configuration 'hfmadf.application'.
    --------------02----------------------------------------------
    Required application module hfmadf.application is not configured.
    --------------03----------------------------------------------
    URI: https://epm-dev.connect.te.com/hfmadf/GlobalWorkspaceNav/bpm/conf/hfmConfig.jsp Status: 503 - Service Temporarily Unavailable Content: text/html
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.

    solved after HFM service restarted.

  • Fix (set in concrete) Bridge Workspace

    How do I set a Bridge Workspace so that future alterations don't get saved by default?
    Thanks,
    Drew

    If I select that named workspace, I get the changes regardless of whether I saved them.
    You have to reset the workspace again using the triangle menu or right mouse click on workspace name itself.
    I'm still trying to find out what I prefer but can't figure it out yet. there is a large number of people wanting to have the last use workspace being sticky for that particular workspace. Sometimes this suites me, sometimes not.
    But the reset is something I got used to.

Maybe you are looking for

  • Advice for recovering from "The requested URL was not found on this server" error when browsing photos and videos on my iPhone 4S IOS5.1

    Im not quite sure how I got into this situation but I have fried my Iphone app photo and video library.  This demonstrates itself in 2 ways 1. The above error message when I attempt to play videos older than a certain date. 2. Photos older than a cer

  • ICloud backup using same Apple id for 2 iOS devices

    I Have just purchased additional storage space to enable me to back up 2 iOS devices. My iPad and iPhone. I have been able to back up my iPad but not the iPhone. My phone is behaving in a bizarre way. Will not open up my email app. When it does it ha

  • Group Policy To Delete Old Shared Printers That Are No Longer Shared

    I am having an issue where I am successfully using Group Policy to deploy some new printers.  (Computer Configuration > Policies > Windows Settings > Printer Connections > Use the Share name \\Server\Print_Shared_Name) but I have on those same deskto

  • Problem with SAP GUI for HTML

    Hi SDN I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the  SAP Easy Access screen in html. Can any one suggest me how to rectify this error and disp

  • Set data for the x-axis

    Hi, I made a program which allows the user to configure and measure Temperature and voltage using a DAQ device. I also set a possibility for the user to save his data of his test to lvm file and then upload and read it on a waveform chart. My problem