Workspaces don't stick

This has been ongoing for long time, but worse now that ever in CS4/ Bridge.
Anyone else encounter this? thanks.

Restart Bridge holding down option (alt) key and choose refresh preferences.
Set preferences again to your wishes and try again.
This has been ongoing for long time, but worse now that ever in CS4/ Bridge.
Anyone else encounter this? thanks.

Similar Messages

Problem with JPGs Downlaoded with Nikon Transfer - Can't Apply Develop Settings in Bridge CS4 and ACR 5.3 Settings Don't Stick

I have found what I believe is a "problem" with JPGs downloaded using Nikon Transfer (ver 1.4.1) and processing same in Adobe Bridge CS4 (Develop Settings) and/or Adobe Camera Raw 5.3 (Photoshop CS4 and Elements 6 as hosts).
Anyone using these programs in their workflow?
The problem, quite simply, is that neither ACR settings (nor Bridge CS4 Develop Settings) "stick" when applied to JPGs that have been downloaded via Nikon Transfer ver 1.4.1.
The same images from the same cameras (D300 and D90), downloaded moments later using Nikon's predecessor software PictureProject work just fine in both Bridge and ACR. Develop Settings appled in Bridge immediately are seen, and JPGs opened in ACR, and settings applied, then "Done" immediately stick and are reflected in Bridge.
If someone else is processing their JPGs in this manner, please let me know, as I have reported the problem to both Nikon and Adobe, and although I have tested it on two different cameras and two differnt laptops, I would like to get an impartial result as well.
One other test, the problem does not seem to affect Nikon's RAW (NEF) format files downloaded from a D2x using Nikon Transfer. More/different test are forthcoming.
Thanks
jeff

ALoverofNikon wrote:
I have generally thought that using the camera manufacturer's software was the safest and most conveneint
Can't say one way or another on that statement about using manufacturers' software. Since Adobe has to interpret each camera models' RAW format having the latest ACR seems to be the best option. But if the manufacturers' software is more convenient, and you get the same results then use it. But it does appear you are not getting what you want, so suggest you try a duplicate test run with images straight from the card reader to Bridge and see if you still have same problems.
I do know it is widely recommended that using a quality card reader gives you more reliable data than getting the pictures straight from the camera. Does not seem intuitive, but that has been experience of many.

Shortcuts don't stick. Hidden shortcut for Graph Type?

I realize there is a glitch that Adobe won't address. Custom shortcuts sometimes don't stick. The only tip I've received is to reselect my custom shortcuts each time I launch Illustrator (this is a pain).
I tried a different approach and assigned an alternative shortcut. But it still doesn't stick for one menu item: Object>Graph>Type.
When I was creating a new graph, I was in the data window and accidentally hit a key that opened the Graph Type dialog. I might have been imagining this, but does anyone know if there's an alternative key to open the Graph Type window?
I suspect Adobe is already preparing CS5 so I don't see a fix coming at all.
thanks

I set it to Shift I and it worked after relaunch on a Mac.
As far as the command aboveI doubt that will work.

Preferences don't stick

One biggest nightmares of using Safari in last year is suddenly prefrences don't stick -- ie number of pages want search, to use/ not use search query etc. The problem vanished after last upgrade, but has resurfaces yesterday -- not sure if coincidence, but I downloaded some update from Apple, can't rememeber what, security thing and something else.
Anyone have any idea how to lick this beast!
The "basics" have not worked....clearing cookies, cache, deleting pref. file -- it "seems" be in an internal thing with Safari, as it did go away on last upgrade to 4.0.3, I think, but is now back

HI Kevin,
Maybe there's an underlying issue. Have you checked the startup disk for errors lately?
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. *Make sure there is always 10% free disk space*
Carolyn
Message was edited by: Carolyn Samit

The authorization don't "stick" to my computer.

I bought some music from iStore for the first time for some weeks ago and I haven't been able to play it on the computer from which I bought them from. It seems like the authorisation of this computer don't "stick" nomatter what I do.
This is what has happen:
I loged in to iStore, bought the music and downloaded it. All green so far. But when I then clicked on one of the new songs iTunes tells me that the computer isn't authorized (even if it already was). So I fill in the exact same user accout and password as I used when I bought the music (account name are also stated in the songs information tab, AND I have only one account). So it then tells me again that I now have authorized the computer, but nothing happens. When I then tries to push play, the same missing authorization loop procedure occour... over and over again.
The same happens for all new songs I bought... none of them works. Worthless. I couldn't even move them to my iPod because evertime it ask me about the account name and password and nothing more happend.
However, I authorized an other computer in the network and successfully moved the new songs over to that one, using the same username and password. On that computer everything worked out fine. I could even transfer the songs to my Nano from there... Isn't it strange?
BUT, the main problem remains. I can't play the music from my main computer and it ain't a small problem to me... in fact, my only intention for buying this music was to play it on my main computer which is the only one that is truly Hi-Fi connected if you know what I mean. The other computer is just a laptop with a "lowtech" soundcard.
So as I see it I haven't got what I bought yet...
On top of this I have spent the last week trying to solve the issue. Being a computers consultant as I am, I always reach for help when I finally run out of ideas myself, and this it it.
I have freneticly signed out, signed in, deauthorized, authorized, uninstalled, reinstalled iTunes, waited for this next release (7.3), payed, and finaly said words out loud I usally keep inside... Nothing seems to work!
I refuse to reinstall my computer because if this because it works like charm otherwise...
Please help.
M.

Move your photos into Photostream and then will appear available on you iMAC i iPhoto11.
Sometimes it seems to take a few minutues so try a few first.
Cheers

Adobe Dreamweaver CS6 application frame workspace don't work

My workspace in frame mode dont work.
It is invisible. I cant only see it when it is on "application bar". It don't help to reset, se this screencast:
Adobe Dreamweaver CS6 application frame workspace don't work - YouTube

I would try clearing the program cache then restoring preferences if that doesn't clear it up...
Deleting a corrupted cache file
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If neither work, a clean & reinstall...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Click Pad Settings don't stick

I'm using an HP Envy 15 Notebook with Windows 10. Currently using HP Control Zone v 19.0.1.12.95. Since the upgrade to 10, my clickpad settings (Settings > Devices > Mouse & touchpad > Additional Mouse Options > ClickPad Settings) don't stick after a reboot. The default 2-finger scrolling seems to be Aussie scrolling, and Pinch Zoom and Rotating default to selected. If I deselect them and reboot, the settings return to their default. Is this a Synaptics issue that they need to fix (and that I need to fix each time I reboot until they do), or is there an older driver set I could use? Feel free to move this to the correct board if I chose incorrectly. Thanks!

Hi I have the exact same problem with HP Pavillion and windows 10. Keep turning the pinch zoom setting off and when I restart it defailts back to on again.

Subtle iDVD bug - buttons don't stick

I have found a subtle bug in iDVD6.0.3.
If you manually place the inter-menu arrow navigation buttons, save, then later re-open your iDVD project and "update" it because you have edited the underlying iMovie project inbetween, the inter-menu arrow navigation buttons return to their default position for whatever theme you've used. They don't stick in your manually placed position. All chapter buttons stay in the right spots, manually placed or otherwise.
There is nothing you can do to stop this happening.
Not a fatal bug, but annoying enough.

Not exactly sure why this sometimes happens. I find that if I don't quit the application then I'm ok. However sometimes after quitting and saving and reopening these buttons do return to their default positions.
Go ahead and try this: drag and drop the plist for iDVD to the trash.
Quit iDVD. Locate a file named com.apple.iDVD.plist and get rid of it. iDVD will create a new one the next time it runs. Empty the trash and restart if needed.
-->/Users/YourName**/Library/Preferences/com.apple.iDVD.plist
Also please read the following:
http://docs.info.apple.com/article.html?artnum=303148
Hope this is helpful and good luck.
SDMacuser

Phone labels don't stick when edited

I have had this problem since the first version of Address Book. When I go into edit mode on an address card and change the label on a phone number (from Home to Mobile let's say), then exit edit mode, the label change doesn't stick. It just reverts back to the original description. Is there any way to make the label change on a phone number permanent?

I have done the same thing you have done. I am doing a lecture series for a teacher. I record her voice with logic express and then transfer the audio into the slides and set the timing to fit the audio. When I convert to Quicktime the ending of the slides are extended, which means long pauses between slides. I figured I could convert to DV from keynote to try to cut those long pauses in iMovie but they keynote program just would crash at the end and I didn't have a DV file. So, I'm just converting from Quicktime Pro into a DV file and work on cutting out the long pauses in iMovie. I'm in the middle of this process now. This seems like a long work around but for now, but I see no other choice. Please apple (& jeebuz) help us out!!

Master Page assigments don't stick with pages (FM 8)

I inherited a book done in FM 8 that looks correctly structured and formatted. This book has about 25 chapters, and I need to add new chapters wtihin the existing sequence.
On the Reference Page, the ChapterTitle tag is associated with the "First" master page. I can't find a way to create a new section starting with the ChapterTitle tag, which doesn't throw off all the other master-page assignments.
It's tedious going through the whole manual to reassign all the chapter opening pages, and then finding and reassigning all the pages that are not chapter opening pages, which have been bumped to the "First" master page. I think the "First" assignment should move with the ChapterTitle tag, and it should also move with a page that it has already been assigned to. Is there a way to make the assignments stick to the pages that already have them?

What happens when you perform an Apply Master Pages operation?
Format > Page Layout > Apply Master Pages

ITunes Match "stuck" @ 6:12 PM -- any metadata changes after 6:12 PM don't stick. Help!

I found a weird bug that I've never experienced before and don't know what triggered it:
I've been importing albums into my library all day and I have noticed that any changes that I made to metadata in my library on and after 6:12 PM are not sticking when I update iTunes Match, even if I Update iTunes Match now (8:39 PM). For example, before 6:12 PM tonight I imported a couple albums from the same artist that initially had a different genres for each one. Around 6:12 PM my iTunes Match must have been updating to the servers before I had the chance to change the genre's to what I wanted. On or after 6:12 PM I highlighted all the albums from this artist and changed the genre to the same thing.
Once my library looked acceptable to me, I must have either manually Updated iTunes Match or importing even more music triggered it, but either way I noticed that a few minutes later all the changes that I made after 6:12 PM were reverting back.
Nothing I have done so far has fixed this. Even songs that I have deleted from my library since 6:12 PM tonight, still return to my library as iCloud songs to be downloaded. But I deleted them 5-6 times since then!! I've made these changes back and forth to my library, the same changes, at least 5-6 times.
Song title changes, album title changes, etc etc will not stick since 6:12 PM. Even if I disable iTunes Match, and restart iTunes and iTunes Match and add the computer again -- nothing. Same thing. Even if I disable iTunes Match, and restart my computer, then restart iTunes and iTunes Match .. no difference.
What is going on here?! Why won't iTunes Match update itself and why is it stuck on 6:12 PM?
Please help!
THANK YOU!

Hi again Jim!
I used SHIFT since it's what you've used without problems, and it seems to have worked. When I re-activated iTunes Match, and added my computer again, it didn't seem to revert any metadata changes.
I've also slowly imported a few new albums, which always prompt iTunes Match to re-update, and after each time it hasn't reverted the previous changes. It is only about 10 minutes worth of metadata for a few albums that were always reverting, but for now this seems to be working. I would assume that if a full day goes by without any issues then this definitely solved my problem.
I am curious, can you tell me exactly what the addition of holding down the SHIFT or OPTION key does when turning off iTunes Match?
Thanks!

Used Photoshop Image processor to batch convert from CR2 to Jpeg and the edits don't stick

Ok, so I had a huge wedding where the bride paid me to deliver a ton of images. Well, i did all my edits in ACR and then photoshop. While in photoshop all the edits look to have been applied. So, I use edit > Scripts>Image processor to convert the CR2 files to Jpeg in one fell Swoop. Well, on my last run though (checking any images for missed edits or what not), none of of the edits were applied to the saved jpegs. So I bring one up in Photoshop (the saved Jpeg) and the edits are applied in Photoshop. So I click save and it tries to save as a PSD file (which it was not originally saved as). I click to JPEG and it asks to replace the existing file and I do. Voila, all the edits are a-pplied. Now, I have about 200 images that I need to do this on.
Is this common with the image processor? Is it not for converting processed Raw files to JPEG and keep the edits?
I'm very frustrated since now, depending on my misunderstand of the tool, I have to spend extra time saving the files again. (At least I don't have to re-edit them)

I have action I wrote so that on large groups of pictures I hit my actions. It goes through the whole set. Then I hit my flatten and it goes through the whole set. Then I go to scripts > image processor and covert them to jpeg.
The weird thing is when I bring up the jpegs in photoshop, all the edits are there. When I look through Photo Mechanic or upload them to the web, they aren't

Acrobat Pro 9.0- Edits don't stick

I often need to make adjustments to a PDF created by an automatic accounting process, and then email it to someone else outside my organization. Typically, it involves placing a solid white block (locked) over existing text, and typewriting over that. (Often these don't let me edit text - they are a scan, etc). If I print it, it looks like I think it should. If I email it to someone- sometimes they see the right 'version' and sometimes when they print it out my edits are simply overlayed on the text I thought I had hidden.
Suggestions?

Use the Redaction Tool for this.

Printing presets don't stick

Iam unable to save presets when printing. I set my choice of paper size andorientation, then save these as a preset. The next time I print, the savedpreset is available as a choice but, when that choice is selected, the papersize and orientation have changed to the "Standard" preset settings.This happens in a number of applications including Safari and TextEdit.
Isthis a known problem?

Too bad that so many people ask questions here and if they find the answer they don't bother to come back and share it with others. I found this same question asked about 8 different ways and only once with the correct answer. I finally solved it when I found the same problem in Textedit and in Preview as well. When I saved the corrected preset and quit and then restarted the application, it finally stuck. hope this helps others with this problem.

Verify Permissions Results don't stick

I'm tracing another problem and decided to check "Verify permissions" again, having done it a couple days ago.
What I am seeing, whether or not I log in as my Admin account or as root, is that no matter that Repair permissions finishes, when I Verify Permissions immediately thereafter, the same errors exist. Here's a copy of the results:
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Group differs on ./Private, should be 80, group is 0
Permissions differ on ./Private, should be drwxrwxr-x , they are drwxr-xr-x
Permissions differ on ./private/etc/xinetd.d, should be drwxr-xr-x , they are -rwxr-xr-x
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Group differs on ./Private, should be 80, group is 0
Permissions differ on ./Private, should be drwxrwxr-x , they are drwxr-xr-x
Owner and group corrected on ./Private
Permissions corrected on ./Private
Permissions differ on ./private/etc/xinetd.d, should be drwxr-xr-x , they are -rwxr-xr-x
Owner and group corrected on ./private/etc/xinetd.d
Permissions corrected on ./private/etc/xinetd.d
Group differs on ./private, should be 0, group is 80
Permissions differ on ./private, should be drwxr-xr-x , they are drwxrwxr-x
Owner and group corrected on ./private
Permissions corrected on ./private
Permissions repair complete
The privileges have been verified or repaired on the selected volume
-------------------------------------------------------------------------------

well, ok ... hen is it not an issue that despite permissions being listed as fixed, that they appear, once again, to be the same errors?
I mean, if it's insignificant, then I'll not worry about "why" it does that ... and move on in trying to fix the original problem ... of which you are familiar anyway.
thanks Ray.

Workspaces don't stick

Similar Messages

Maybe you are looking for