World Edition, Turkey couldn't register my phone
I was in Turkey for 3 months last year. I bought the World Edition BlackBerry so I would have communication with my family and friends while I was abroad. In Turkey, you have to register your phone with a cell company, otherwise service will be disrupted after two weeks. When I attempted to register my phone, they said that they could not do it because the BlackBerry network had no knowledge of me. As a result, I had to use Skype, which was a pain because I had to schedule my calls to home. Also, the phone worked with a Vodafone sim, but not with a Turkcell sim. Has anyone traveled to Turkey and had the same problem? If not, what were the steps you took to register your phone?
If it helps, in the States I am with Alltel and they do not use sims except for their "global" BlackBerrys. Could this be the problem? I have called Alltel and they have no clue what to do and some of them have no idea what I'm talking about. I'm getting married there this summer and really need to have this situation fixed because our guests are arriving at different times and I will either turn to crack or run away if I have to polish wedding plans AND stay inside trying to coordinate things from Skype.
H E L P FELLOW BB USERS!!
As a resident of Egypt you can only purchase from an Apple online store ,in your Country
Apple does not have an online Apple.com online store in Egypt
SO
These are your options
http://www.apple.com/eg/buy/
Similar Messages
-
Sprint 8830 World Edition SIM issue and possible cause
I recently purchased a Sprint 8830 World Edition as a good travel/backup phone. The device is unlocked, as verified by going to Options>Advanced Options>SIM Card and then typing MEPD. Everything there shows Disabled.
Here's my problem:
While in the U.S. just to test it out, I inserted a T-mobile SIM and the 8830 searches for a GSM network, and after a while shows "no service". I also tried an AT&T SIM and the 8830 does the seach again, and after a while shows "no service". Am I getting this because I'm the U.S? Is this any indication I'll have a problem in another country using a local SIM card?
Addition info:
When the 8830 was released, way back when, I found a comment from someone saying
"this (8830) is only unlocked for GSM networks, and presumably only those GSM networks that aren't in the same region as Sprint networks (so roaming on AT&T and T-Mobile in the US is probably also out of the question"
Solved!
Go to Solution.lfang wrote:
Addition info:
When the 8830 was released, way back when, I found a comment from someone saying
"this (8830) is only unlocked for GSM networks, and presumably only those GSM networks that aren't in the same region as Sprint networks (so roaming on AT&T and T-Mobile in the US is probably also out of the question"
This correct. It will not work in the US.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Cisco sip ip phone CP-7841 couldn't registered in cisco CME SRST 2951
Hello,
My IP phone CP-7841 couldn't registered in my call manager. Can you help me please?
See the configuration below:
yourname#sh run
Building configuration...
Current configuration : 7013 bytes
! Last configuration change at 17:52:57 UTC Mon May 4 2015
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname yourname
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
aaa session-id common
ip dhcp excluded-address 192.168.2.1
ip dhcp excluded-address 158.113.41.1
ip dhcp excluded-address 10.10.10.1
ip dhcp pool voice
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
option 150 ip 192.168.2.1
lease 0 2
ip dhcp pool data
network 158.113.41.0 255.255.255.128
default-router 158.113.41.1
lease 0 2
voice service voip
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
registrar server expires max 1200 min 300
voice register pool-type 1
description Cisco IP phone 7841
reference-pooltype 6941
voice register global
mode cme
source-address 192.168.2.1 port 5060
max-dn 400
max-pool 150
load 7841 sip78xx.10-1-1SR1-4.loads
load 7861 sip78xx.10-1-1SR1-4.loads
authenticate register
authenticate realm all
tftp-path flash:
file text
create profile sync 0002065003436039
voice register dn 1
number 101
name phone 1
voice register dn 2
number 102
voice register pool 1
busy-trigger-per-button 2
id mac E0D1.73E4.0C58
type 7841
number 1 dn 1
voice register pool 2
busy-trigger-per-button 2
id mac E0D1.73E4.A54C
type 7861
number 1 dn 2
license udi pid CISCO2951/K9 sn FCZ185070TS
hw-module pvdm 0/0
username unicef privilege 15 secret 5 $1$pCbf$7NtwVixNLu1vbwJJLRTN5.
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 10.10.10.1 255.255.255.248
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1.10
description router interface for voice vlan
encapsulation dot1Q 10
ip address 192.168.2.1 255.255.255.0
interface GigabitEthernet0/1.50
description router interface for data vlan
encapsulation dot1Q 50
ip address 158.113.41.1 255.255.255.0
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
nls resp-timeout 1
cpd cr-id 1
tftp-server flash:rootfs78xx.10-1-1SR1-4.sbn
tftp-server flash:sboot78xx.10-1-1SR1-4.sbn
tftp-server flash:sip78xx.10-1-1SR1-4.loads
access-list 23 permit 10.10.10.0 0.0.0.7
control-plane
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
mgcp profile default
gatekeeper
shutdown
telephony-service
max-conferences 8 gain -6
transfer-system full-consult
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN
CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
scheduler allocate 20000 1000
end*****After looking at your config again, I see your "voice register pool-type 7841" had been added. I should have looked at the config a little closer.
Hello Akaffou Aristid,
The 7841 phone is a revision of the older 6941 phone and it needs to be referenced in the config.(Fast Track Configuration)
New SIP Phone models validated for CME using Fast-track configuration
voice register pool-type 7841
description Cisco IP Phone 7841
reference-pooltype 6941
"Once the new SIP phone model is configured using the fast-track configuration approach, the new phone model can be provisioned using the existing voice register pool configuration option as shown below."
Below is the link that references the above commands.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#pgfId-1295535
Hope this helps.
Please rate helpful posts.
Thanks. -
I have 2 bb world editions that I paid cash for, and i live near the ocean and verizon stinks here due to a small hill that blocks the local phone tower, other services work fine here, ATT is really good, sprint isnt great, etc... but I am tired of having to go stand 3 feet into the surf to get calls threw, and cant tether at all... and verizon wants me to pay them a lot for the last month of no service... ssoooooo is there any way to transfer to another carrier? Help...!!! thanks for any info
williamOk, the devices are yours< and what happens with the contract, can you get out of contract?
If you can change the service to Sprint, ATT is GSM and the devices are CDMA.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved. -
Help Needed with my inactive Verizon 8830 World Edition...
Hello all, new to the site and am looking forward to both the information offered and whatever way I can contribute...
I have a Verizon (not active) 8830 World Edition that have been unused now for 2+ years as we had moved to Scotland, UK for educational reasons and have since used Orange and the Blackberry's they offer.
My wife is going back to the states and we'd like to use this Blackberry with a Simm card bought to use for both local calls whilst she is there and calls back to me in the UK. We previously bought a card to put in the phone but it did not work and when going through the cards support they informed us we needed to call Verizon.
As before mentioned the 8830 World Edition is NOT registered with a carrier/Verizon anymore. Called Verizon at 888 844 0395 and they told me that I HAVE TO HAVE my phone connected with a Verizon Plan and that is the only way it will work (proprietary).
The phone IS unlocked as we initially used it once we moved to the UK but now we want to use it back in the US to call home here in the UK with a US Simm card...
Seems a shame if we can't and I'm sure there is a solution out there if anyone with the know how is reading... any help out way is greatly appreciated...TINEEHINEE wrote: they told me that I HAVE TO HAVE my phone connected with a Verizon Plan and that is the only way it will work (proprietary).
That is correct. Spot on.
TINEEHINEE wrote:
The phone IS unlocked as we initially used it once we moved to the UK but now we want to use it back in the US to call home here in the UK with a US Simm card...
That is also correct... it is usable OUTSIDE of the USA on GSM networks, but NOT in the USA on ATT or Tmobile. Only Verizon in the USA.
Sorry, that's the beauty of the 8830.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
8830 World Edition Operating System Continuall​y Freezes
I purchased a World Edition in March '09 and shortly thereafter it continually froze up after being idle for more than two minutes. This started after upgrading the OS to v4.5.2. The phone couldn't be repaired and was replaced. The new phone started behaving the same way. It would work while active but after 2 minutes of idle time it would totally freeze then 5 or 6 minutes later would come alive and freeze again after a short idle time. Wiping clean solved the problem the last time but it occured again. Does anyone know the cause or a fix?
When the phone was wiped did you choose to also erase third party applications? What additional apps are loaded on the device? Is your replacement device running 4.5 or 5.0 OS?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Cannot backup time machine to wd world edition external hard drive
After installing os x lion I cannot back up Time Machine to a WD World Edition external hard drive. My Mac can see it in Finder but when I try and configure Time Machine it tells me - There was a problem connecting to the server "MyBookWorld.local" then goes on to say The version of the server you are trying to connect to is not supported. Please contact your system administratot to resolve the problem. Is it a firmare p[roblem?
WD knowledgebase article acknowledging the issue and stating that they are working on a fix. If you register you can subscribe to the article so you're notified when it is updated.
http://wdc.custhelp.com/app/answers/detail/a_id/7081/session/L2F2LzIvdGltZS8xMzE xMjgxMDgyL3NpZC9nVEVMZ3p6aw%3D%3D/session/L2F2LzIvdGltZS8xMzExMjgxMzYxL3NpZC9nVE VMZ3p6aw== -
I am unable to set my WD mybook world edition (white light) for time machine.
I have new iMac running OS X Mavricks 10.9 and a WD mybook world edition (white light) connected via eithernet to router.
I am unable to set up time machine using this drive.
I can see the MyBookWorld drive in Finder and read and write files with no problems. I can also see the MyBookWorld_Backup drive but I am unable to connect.
Time machine can see the drive but when I select, use drive, it trys to connect and gives me an error message: There was a problem connecting to the server "MyBookWorld-Backup"
I have already updated the hardrive firmware.
Any ideas?WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine. -
BB8830 World EDition - Verizon - Not working with VODAFONE SIM card
Hi,
I bought BB8830 world edition from US to India. It works fine with Airtel Network. But its not working With Vodafone SIM card.
Option--security option-- Certificates-- Vodafone WLTS(x - red cross mark) is there. It expired on 2008.
Please let me know any one to find out solution for this. whether I need to updated the BB OS or how it works with vodafone SIM..
Please post the answer in [email protected] also.
Thanks in advance.If the phone is unlocked, then contact Vodafone. They are the carrier you are trying to use, so only they can really help you.
-
my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061 -
Firmware Update for my blackberry 8830 world edition with Bell Canada
Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?
You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5. -
Blackberry 8830 World Edition -- won't play internet video
I cannot get my Blackberry 8830 World Edition to play internet video, such as YouTube videos, etc.
When I click to play them on my phone, I get this message:
"a problem occurred when trying to render page"
Can anyone help?If I'm not mistaken, you need OS 4.5 to do that and OS 4.5 has not been "officially" released yet despite what RIM tried to suggest in an email they sent out the "Blackberry Owners Lounge" members a month or so ago. I'm running the latest beta of OS 4.5 and it runs Youtube vids with a small tweak.
Unfortunately, you'll probably just need to wait until RIM finally gives us 4.5 officially. -
Will there be a CDMA Curve World Edition
Hello to the new Blackberry forums. Guess I am the first person to post here. Anyway, I noticed that the Curve that is launching for CDMA carriers soon is not a World Edition phone. Does anyone know if there will be one at some point? I would love to get the Curve, but I have to have the International capabilities. Thanks
kewl i did not know that. so if you cant wait then the 8330 is for the win?
im not so good with advice. can i interest you in a sarcastic comment? -
Rev A on 8830 World Edition?
I am trying to decide on buying a Curve 8330 or a 8830 WE and the deciding factor will be if the 8830 WE can do Rev A or not. I will be on Verizon and the phone will be from them. Does the 8830 WE support Rev A now? If not, will there be some kind of free/cheap firmware upgrade available to do so in the near future? I've heard that an "upgrade" will be coming out and I don't know if it is true or that if it is true that it will be something that can be easily done to current 8830s. Thanks in advance.
Thanks for the quick reply. The similarity in the Blackberry model numbers is a little confusing. I am specifically referring to the 8830 World Edition, not the Curve 8330. Verizon's website says the Curve 8330 will not be Rev A upgradeable (http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewPhoneDetail&selectedP...) but says nothing about the 8830's Rev A capabilities or lack thereof. I sent Verizon an email this morning asking the same thing but haven't heard anything back yet.
-
Podcasting with an 8830 World Edition Blackberry
Is it possible to download podcasts (audio only) to the 8830 World Edition Blackberry? If so, can someone direct me to where I can find the instructions for this process?
Thanks,No, you can't , if you turn off the phone, the data is turned off too.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.
Maybe you are looking for
-
Extra Space at Bottom of page in Google Chrome
Here is my site: http://www.abbottsportslincoln.com/volleyball/volleyball.php If you open it in Chrome there is tons of extra space at the bottom. How can I fix it. It works in the other browsers. Here is my code: <!DOCTYPE html PUBLIC "-//W3C//DTD
-
Creative Suite 6 installation stuck on windows 7
Bought creative suite 6 Design and Web Premium and started the installation on windows 7 Went with default installation and selected all (default).. After around 20 min or so it keeps accessing CD drive while installing acrobat X. Looks like it go
-
Xp means in windows xp .
xp means in windows xp ?
-
What's the role of jsessionids in ADF session management?
Hi all, I'm fairly new to ADF and I've had a client ask me if ADF is using jsessionid consistently for sessionization. From a quick google search it sounds like all J2EE applications will be using jsessionids as part of their session management, and
-
Conditional drop downs for forms
I need some help! I have three drop down boxes. (for the sake of the forum I'll call them 1, 1a, and 1b) I want to make a selection in 1 and given that selection I want either the 1a or the 1b drop down box to appear. Here is what I have so far. I'm