World of Warcraft (Wireless) - Firmware update and FAIL

I just made Firmware update for my World of Warcraft Wireless Headset. After "successful" firmware update I Can't connect my wireless headset with my PC.
I installed new driver. Also reinstall my windows 7 and still nothing.
Anyone have similar issue?

Ye, same problem with my pair.. but have resolved it..
You have to turn em off by swith on the left speaker -- > chagne a port usb for a stick -- > turn em ON --> then push both connection buttons on speak and stick for 10 second or more till u see corect result on LED
Cheers and GL

Similar Messages

HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

Latest firmware update and more problems with 30" external displays?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?

10.4.6/firmware update and sync not working? No, .mac is down

I went to sync .mac this morning, and I guess it was the first time since installing the firmware update and 10.4.6. It first said another computer with the same name was registered, then hung. Next time it said it was not registered and proceeded to sync very slowly then exit with errors. After a reboot there was still trouble. Then I thought to check and found on .mac that the sync service was down since yesterday, and remains down.
Funny how I thought my system was acting crazy when it was the .mac system itself that's experiencing problems.
Mark

I got my bookmarks to sync this morning, but nothing else would.

I've just had a keyboard firmware update and now my volume control buttons wont work

i've just had a keyboard firmware update and now my volume control buttons wont work.
Has anyone else had this problem? if so have they found out how to fix it, or is this an on going issue?

Hi,
Your problem has some similarities to this problem that I reported earlier this month that that still arises every few days. I was thinking that my problem was related to some sort of bug in Entourage, but maybe it's something else...
Ken

Firmware Update and Windows XP

The Firmware update killed my Windows XP partition. It just hangs when the Windows XP pict is there with the progress bar. It will boot in safe mode tho. Who knows what to do next since I don't know jack about windows, I only use it for games, it's not even hooked up to the net. Any help would be appreciated.
ChuckBlack

Hi chuckblack,
Sorry to hear this and probably won't help (since you seemed to have already tried safe mode) but I could not get into my bootcamp/fusion/xp after update, until I shutdown down and did a new start. Now i'm sending this e-mail from windows. For some reason the fusion menu now shows two disk options, one labelled 0 and labelled 1. last time this happened with firmware update and the 0 eventually disappeared. As you, I only use windows for a few programs and get out of there as quickly as possible. Good luck.
lou

I just did an Time Capsule firmware update and now my Time Capsule is dead. What happened?

I just did a Time Capsule firmware update and now my Time Capsule is dead. What happened?

tresbaileys wrote:
it may be important to note that when I put my ear to the box I can still hear the HD spinning (although no lights are lit and it doesn't show in the airport utility). Ideas??
That is very bad.. how old is it??
The Gen4 TC can die this way.. it is not usual but it happens.
Leave it for several hours to cool off. Do a factory reset immediately when you try to restart it.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
Tell me exactly what the LEDs do throughout this process.
Both the main one at the front and the LED on the ethernet ports which should all flash during bootup.
If it is less than a year.. of course Apple will replace under warranty.. 2 years in some places.. Europe .. places with stronger consumer laws. If you have applecare on a computer it should still cover the TC.
I kind of doubt you are going to get this going again... but we can try.

Firmware update and SATA II hard drive (continued)

This thread is a continuation of [Firmware update and SATA II hard drive|http://discussions.apple.com/thread.jspa?threadID=2054387]. The original thread is getting long and causing some browsers to time out.

fishbert wrote:
oldmanpants wrote:
I'm interested to hear how Fishbert is doing with cable replacement…
So far, so good.
One of the symptoms of this issue is an incrementing of the drive's CRC error count.* Back on the 28th (right after doing the cable replacement), S.M.A.R.T. Utility told me my CRC error count was at 6322. From early July when I upgraded to EFI 1.7, until the rollback tool was released (in August?), this was how high the counter had climbed… plus a bit from testing back-and-forth when PU1.0 showed up.
Anyway, 6322 was the count on 11/28/09. A bit ago, it read 6324 (12/05/09). I don't know where those 2 extra came from over the last week, and I'm going to continue checking in on it, but 2 is a far cry from the 6000 or so over a month, maybe a month and a half. And as for user experience, I haven't seen any of the freezing typical from this issue, either.
* Again, there seems to be more than 1 issue that people have come in here with, but CRC errors was identified fairly early on as a characteristic of this issue, and is one I definitely saw on my machine, so I use it here to illustrate the difference I see.
it seems like only solution is changing the SATA-cable, the problem; it's out of stock at third party vendors. (hot Christmas gift, everyone is buying it), Fishbert how is it holding? give us an update.

Firmware update and fans

so i recently installed the firmware update and ever since the fan has been running constantly. its definitely keeping the machine cooler, but its kind of annoying. is there an app to regulate it? thanks.

I hate to sound negative, but if you get a fast processor, it gives off heat. If you want a nice thin form factor with very little extra space inside, the heat can't escape without fans. If the processor gets too hot, it will die.
I really think that fans are a small price to pay for having such a powerful machine. Plus, they are a lot quieter than the fans in my old laptop!
Just how loud are we talking here? If you can hear them from rooms away, you may have a problem.

Cisco Router tried to take a firmware update and no longer works

Ok so internet was working fine until Cisco Connect told me to take an update. My connection is wired and there were no disruptions during the download. Yet the download still failed and now my power light blinks continuously and there is no internet access. I tried instructions on "How to unbrick your Cisco Router", even got them to work, it took the firmware update from the cmd line. Still doesnt work though. What's wrong with this thing and how do i fix it?
Solved!
Go to Solution.

I ended up downloading a firmware utility program and was able to get it to reload. The power light became solid somewhere between 2-5 mins, however still didnt connect to the internet. Found that all this factory resetting will change your Internet access name & password, with no way to find out the new one. You have to remove the Cisco Connect program from your computer and reload it from the original disk. Only then will you be up and running again. While I appreciate the response Helm, I was way beyond a 30 second reset button solution when I posted this lol.

Macbook air is stuck in a reboot loop after running Software Update. It looks like a firmware update is failing.

I have a first generation Macbook Air running Lion, and just ran software update to get the latest version of iTunes. It appears I may have gotten a firmware update mixed in the bunch, and now it keeps trying to run the update at boot, failing, and shutting down.
I can start the restore partition, and the system appears to function, but I cannot figure out how to abort this failing update so I can use my system, and determine which update is breaking it and why. I've tried resetting the firmware, but that didn't change anything.
There's nothing, not even a the CD drive plugged into the Air, so it's not a peripheral problem.
I could restore from backups, but that seems like a very brute force way to get rid of a firmware update loader.
Does anyone know how to disable these little beasts?

Restart the Air while holding down the shift key, this is safe mode. Once in to the login screen, login then hold the shift key again. It will disable login items, which can be the cause of startup problems. Remove all your login items from your user accout and try a restart (Note the login items if you need to re-add essential ones later). If it all works well, then keep an eye on third party startup items, they will cause you grief!

Tactic rage 3d wireless firmware update

Hello,
I've had my headset for almost a year, and I love it. I heard something about a firmware, and decided to install it. Under the download I was talking with my friends on skype and suddenly all my sound went out, and I wasn't able to turn on my headset again. There's no lights or anything in my headset now, the wireless transmitter works fine but it doesn't connect to my headset. I wish I didn't download this firmware . What can I do?

Originally Posted by Loi-CL
Hello Qash,
Unplug the wireless transmitter. Open up the device manager window on your computer. Connect your headset to the computer using the USB cable. Observe the device manager window. Is it detected under device manager?
Same thing has happened to me. Bricked my headset. Device manager places it under "Human Interface Devices", "USB Input Device Properties."
Under details tab, under "Bus reported device description", is listed "Avnera AV6302".
I've removed the device from device manager, unplugged it, restarted computer, plugged it back in, and it installs in the same place.
It appears the the receiver is detected properly and will light up. Headset is completely dark with no indication of charging, connection, etc. Very frustrated as I just bought this unit and was doing the initial install and driver updates. Now I cant use it at all!
I've sent my request for support via the website and also got the 2 day minimum response email back.
TaLnZ
Update: After letting the headset sit all weekend with it plugged in, but the computer off, I turned on the computer this morning and noticed that the power light was blinking. I then tried the headset update, and it worked! There is another post on this issue as well: http://forums.creative.com/showthread.php?t=699394
Good Luck!

Laserjet M1217nfw - Bricked after disconnected wireless firmware update

Hi,
As I was upgrading my firmware for the Laserjet M1217nfw via my wireless network, my wireless router flaked out and i lost connectivity. I was about 50% complete sending the latest firmware to the printer. How do i go about unbricking this? Can I do this via the RJ45 port or via the USB connection?
Thanks,

The firmware update can be downloaded from here and is able to be performed across USB.
Let me know how this goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Latest firmware update and startup problems

Hi I have been reading all about this so-called firmware and its importance in keeping updated on my new macbook pro. Therefore I have been diligently trying to keep it updated over my dial-up connection. I installed the latest firmware as my automatic update suggested. Now I get the spinning startup circle of death. Tried booting in safe mode to no avail. Help? (I also have version cue installed.)

Hi jbell,
Firmware updates are not availible in Software Update, only sofware updates are. Did you Repair Permissions prior to and after updating software? You always should. Go to Applications-Utilities-Disk Utility, and highlight Mac OS X in the left hand column, then Repair Permissions below. Firmware updates are available here....
http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
http://www.apple.com/support/downloads/macbookpro15inchsmcfirmwareupdate.html

Just did a Firmware Update and can't receive or send mail

I just did a firmware update as recommended by Apple:
2008-04-13 18:30:24 -0400: Installed "Aluminum Keyboard Firmware Update" (1.0)
2008-04-13 18:30:32 -0400: Installed "iMac EFI Firmware Update" (1.3)
I had restarted my iMac and noticed that my Mail 3.2 will no longer connect to my mail servers and send or receive mail.
My internet connection is fine when using my browser. I closed and restarted "Mail" and this didn't help and even restarted my computer but that didn't help either.
Anyone else that just did this update have a similar issue? Anyone know of a fix? I don't think I can undo the Firmware update now, so what do I do?
Thanks

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Delete and re-add the email accounts.

World of Warcraft (Wireless) - Firmware update and FAIL

Similar Messages

Maybe you are looking for