World unlimited calls to Hong Kong not working

Hi Skype,
I have a World unlimited subscription and tried making calls to Hong Kong but it keeps saying my skype account is blocked. It was working a week or two ago. I have successfully made calls to mainland China without issues. I have also used regular long distance (non skype) and that works fine. Can you please provide some assistance on this issue.
Regards,
T_2222

t_2222 wrote:
Can you please provide some assistance on this issue.
Hello,
Your account has been blocked.
Please file here:
https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

I just bought the iphone 4s and when I have loss calls the telephone does not work?

I just bought the iphone 4s and when I have loss calls the telephone does not work?
i cant turn off, i cant do anything
should I droop it?

I know this sounds really basic, but did you remove the protective plastic film? I was going to leave mine on for protecting the screen and had the same issue. I removed it as it was the source of the problem.
Good luck!

CALL Transaction in background not working pls help URGENT

hi i have writtin a bdc program which uses CALL TRSANCTION everything is working in foreground.
if i schedule the program in background the call transaction does not work. any idea why?????????
pls help its urgent

hi
good
have you checked in the debug mode, if you have checked in the debug mode check wheather it is giving any error before data is displaying in the screen, if any error is displaying as a message than check that error why it is coming there.
If no error is coming than check your flow of the bdc screen in the debug mode , there must be some prob, so that it is not working in the background.
thanks
mrutyun^

True caller is installed but not working please let me know the setting.

i installed true caller in my 5s but the caller id is not working and its not showing caller detail while i received any unknown calls.

Contact the developer of true caller for assistance.
Be advised that certain wireless providers do not send the information
needed for caller ID when the caller has blocked his number or is spoofing
it.

Call function background is not working

Hi All,
I created an RFC function module with one import parameter and 2 tables.
I am calling this function module in baground
CALL FUNCTION "ABC" IN BACKGROUND TASK
   Exporting
    var = var
tables
tab1 = tab1
tab2 = tab2
i am passing var and tab1 and updating tab2 in FM
tab2 is not updating if i call in BACKGROUND
It is working fine in onlie mode.
Can anyone please through some light on this
Thanks,
Naveen

Hi Rob,
Thanks for the reply. Here is the code
Here i am passking lv_flname, lt_binary_file and updating lt_objbin
in the function module i am going to update lt_objbin.
The reason i am doing this becuase if i use open dataset it failing authorization.
Thats why i want execute these statements in background. These report will be executed by many users, so they can not give authorization for everyone.
CALL FUNCTION 'ZFI_VIM_OPEN_DATASET' IN BACKGROUND TASK
        EXPORTING
          lt_flname      = lv_flname
        TABLES
          ls_binary_file = lt_binary_file
          ls_objbin      = lt_objbin
        EXCEPTIONS
          error_dataset = 1
          OTHERS         = 2.
Here is the function module code
FUNCTION zfi_vim_open_dataset.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(LT_FLNAME) TYPE CHAR80
*" TABLES
*"      LS_BINARY_FILE STRUCTURE TBL1024
*"      LS_OBJBIN STRUCTURE SOLISTI1
*" EXCEPTIONS
*"      ERROR_DATASET
OPEN DATASET lt_flname FOR OUTPUT IN BINARY MODE.
IF sy-subrc = 0.
    LOOP AT ls_binary_file.
      TRANSFER ls_binary_file TO lt_flname.
    ENDLOOP.
    CLOSE DATASET lt_flname.
ENDIF.
CLEAR: ls_objbin. REFRESH: ls_objbin.
OPEN DATASET lt_flname FOR INPUT IN BINARY MODE.
DO.
    READ DATASET lt_flname INTO ls_objbin.
    IF sy-subrc <> 0.
      CLOSE DATASET lt_flname.
      EXIT.
    ELSE.
      APPEND ls_objbin.
    ENDIF.
ENDDO.
DELETE DATASET lt_flname.
ENDFUNCTION.
Moderator message - Please use code tags to format your code
Edited by: Rob Burbank on Apr 1, 2010 3:42 PM

ExternalInterface.call('scroll',0,0) not working in chrome

My application has a requirement that if the user is in the bottom of the page and clicks on any link which in turn opens a flex popup, it will take the user to the top of the application as popup opens on the top (as per requirement). For this i have used ExternalInterface.call('scroll',0,0); which works perfectly for every browser except google chrome. in chrome when user clicks it takes the user to the top but doesnt opens any popup, once user clicks on browser scrollbar and moves slightly then the pop up opens.
Need a solution for this.
Thanks in advance.

Maybe chrome needs to get focus, if so instead of calling the scroll call
another JS function which scrolls and sets the focus on some html element in
the browser. Not sure if it will work but you can give it a try.
C

IPhone 6 Wifi Calling - No Verification Text/Not Working

I have an iPhone 6 and tried to enable wifi calling a few weeks ago. Followed the process for setting it up, and everything went as it should, except I never received a message saying it was activated. Have tried turning it on and off/restarting the phone etc several times since, however it still is not working, and I still haven't received any sort of text message to say it is activated.
The option is there and it lets me turn it on and off, but still doesn't actually do anything.Any ideas?

Give 150 a call to make sure it is active on your account, sometimes they need to give it a nudge.... There have been rare instances of a routers firewall blocking it too.

On call sound volume is not working while using ha...

The volume control does not work on call while using hands free on my Lumia 800..is that a known issue?

Hi,
this is a JDeveloper and ADF forum, not an OA framework forum. We don't have the "OAGlobalButtonBean" class and thus wont be able to help
Frank

Droid Turbo Advanced Calling/ Internet Features Do Not Work!!!

This is my 2nd Droid Turbo since the phone came out last November. The first one had to be replaced because all the apps and the phone kept crashing. Let me just say that VERIZON and MOTOROLA both have some of the WORST Tech support I have ever experienced with a phone. I know more about these phones then they do. I even already know all the troubleshooting that they are going to make me do and waste my time!
I clearly tell the Level 2 tech support person that yes, Advanced Calling is enabled on my phone and on my account. Yes, it worked fine on my last Droid Turbo. As soon as I make a phone call the 4gLTE disappears and the phone says I have no Data Connection. I can't get on the internet unless I'm using WiFi. So ofcourse they try to trouble shoot it and that doesn't work so then they get Motorola on the line and this girl knows even less than the last one. On top of that she can't even speak English. Are you ************ kidding me! What a wast of my time. In the end they couldn't fix ********
I'll never buy another Motorola phone and I'll probably just cancel Verizon since they don't have service in my area anyway. Which btw, I live in LA but my house is on top of a hill where Verizon has no service so they told me I can cancel my contract anytime. Too bad for them!

When you say "does not work," what does that mean, exactly? What happens? Any error messages?

Re: Free One Month Trial World Unlimited Calling N...

I need to make a call, I was hoping to do it through the trial but I can't and I can't top up credit either.

eapoc wrote:
I need to make a call, I was hoping to do it through the trial but I can't and I can't top up credit either.
Hello and welcome to the Skype Community!
Your calls to UK cellphones are not included in the Unlimited World Subscription. Have you tried purchasing credit at your client window? > Skype > Buy Skype Credit
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Call forward to VM not working

Hi All;
we have switched from TDM to SIP trunk. after that call forward to voicemail and also automated attendant don't work. then I changed VM pilot number to full number instead of 6000. still when inbound call is received, and called party doesn't answer the call, it is supposed to forward to VM but call is failed. also when somebody calls to main number, it is supposed forward to AA, but call is failed. very appreciate, if there is any suggestion.
thanks
Alex

The problem is that Unity sees the forward call as "forward" actually is not a problem is the normal behavior. What we need to do is to Unity see the call as "Direct" configuring Routing Rules resolve the problem
Try:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800a6a14.shtml

Program making a RFC call to Function Module not working in background

Hi All,
I have an ABAP Program which is used to do a reconciliation check between the R/3 and BI system for Invoice Data. Please find below the details of the program flow:
1.     Program counts the number of records in the DSO table and aggregates the Net_Value based on the date range (passed as parameters)
2.     Program calls a Function Module (RFC Call) which counts the number of records in the R/3 table and aggregates the Net_Value for the same date range
3.     Function Module Passes back the count values and aggregated Net_Value to the program
4.     Program compares the count and aggregated Net_Value from EDWH and MSP systems and sends an email mentioning whether the counts match or not
However we are facing an issue.
Whenever, we execute the program in dialog mode, it works fine and fetches results within 5-6 minutes. However if we schedule the program to run in background (parameters through a variant), it gives no results even after running for over 3-4 hours. We tried figuring it out yesterday but could not come to any conclusion. Since there is a RFC call being to the function module, we were wondering if we need to specify some other parameter as well.
Thanks & Regards
Dharmendra

RFC Call is a procedure for executing remote enables function modules. It is done via the 'Remote Enabled' radio button on the function module's attribute screen.

Passing arrays with Call Library Function does not work after application builder

Calling a DLL with Call Library Function which requires an array of data works correctly in Labview, but after building an exe with application builder, the call no longer works. Dereferecing the pointer in the DLL retuns all 0s and not the actual values.
Solved!
Go to Solution.
Attachments:
TEST.zip ‏28 KB

I did not run your code because it is a little unclear to me what it does.
Two things:
First, is the DLL you are calling the DLL-ified version of PopUpNames.vi? Then the problem is likely that the panel is not being built into the DLL.
When LabView builds an application / dll, it strips the front panel and block diagram from all VIs that it doesn't think need to show a panel at run time. This reduces file size and increases code security. The App Builder's panel inclusion logic can be overridden by Build Specifications -> Source File Settings -> Remove front panel. A better method is to put a property node on a control in a window you want to show marking it "visible"; this is sufficient to tell the App Builder it should keep the panel.
Currently Source File Settings shows "no dependencies" (clearly incorrect---another evil side effect of Express VIs I guess) but if you change the settings as shown below to keep ALL panels, one might hope the App Builder can figure it to keep the panel when it deconstructs the Express VI. (Alternatively convert the Express VI into a regular one.)
A second comment: I am a bit flummoxed at the larger goal here. You are calling LabView DLL from LabView, which doesn't make a lot of sense, so I assume your larger goal is to call LabView from C or vice-versa. In that case be aware that your DLL is x86 (32-bit) but you are passing 64-bit ints as your pointers. In this case it is 32-bit LabView with 32-bit pointers in embedeed in 64-bit containers calling 32-bit LabView with 32-bit pointers in embedeed in 64-bit containers, so it all works, but if your going to call this from C or whatnot you're going to have to follow that same design.
When calling C code the LabView Call Library Function does have a "unsigned pointer-sized integer" data type that always appears to be 64 bits in the dev env but which actually passes a 64 or 32-bit int to the DLL depending on the environment. The "pointer sized int" has to be 64 bits in the "LabView" part of the code because LabView's strong typing requires the data type to be determined at compile time. Casting all pointers to the largest data type in LabView makes it possible to write platform-independent code, but down at the Call Library level you still have to put the right number of bytes on the stack.

[SOLVED] calling releaseData() on DCIteratorBinding not working correctly

Hi,
I have a jsf form to search data when pressing a submit button by calling a webservice. In the resulting table on the same page a record can be selected and when a submit button in the selection table facet is pressed a bpel webservice is called. After the submit button is pressed i want the methodIterator bindings for the webservice datacontrol to release their data so a next call to the jsf page will not show the search result of the previous action.
I tried to use the releaseData() method of DCIteratorBinding class but that only seems to work on a variableIterator. How can i reset a methodIterator to its initial state (showing the no rows yet text)?
Kind Regards,
Andre Jochems
Message was edited by:
ajochems

Hmmm.... Had a similar problem, so I tried the suggested solution, but the next time I submit a search, I get java.lang.NullPointerException--I assume because the business service (in may case, a session bean) has been released.
Maybe there is another way??
Ara

Link between Service Call and Marketing documents not working

Hello all,
I found a field in Marketing Documents - Rows data - that should be the link between a Service Call and the Marketing Documents.
The field is for example "INV1.isSrvCall" but, even if I create an Invoice from the Service Call, the field will be populated with the value "N".
Dows anyone knows how to make this field work? Or any workarround to make the connection between a Service Call and the generated documents?
Thanks in advance,
Kind Regards

The problem with SCL4 is that SAP updates it way too late in the process to be meaningful while in the module. You create a service order, then go into the expense document. That is when we need to know the service call id and the internalsn of the equipment being worked on Only when you get out of the service module do SAP post to SCL4.
The data (before writing to SCL$) exists as a veriable on the original service form. But can we access it from the expense document?
The question is how to access the data (service id) on the original service form from an expense document within the servide module. It is the service form, and that is currently not in focus, so I do not know if you can access it as a varaible, while in the expense document (sales order or invoice) that is in focus.
Can any one help with this/
David

World unlimited calls to Hong Kong not working

Similar Messages

Maybe you are looking for