[worrisome syslog messages after kernel update]
Hi everyone,
I've installed the following two kernel patches on our Solaris 10 Sparc system:
120011-14
127111-02
During installation of 120011-14 I got some warnings:
WARNING: /platform/sun4u/kernel/misc/sparcv9/des <no longer a linked file>
Installation of <SUNWcakr> was successful.
WARNING: /kernel/misc/sparcv9/des <no longer a linked file>
Installation of <SUNWckr> was successful.
added profile to /etc/name_to_major
added n2rng to /etc/name_to_major
added physmem to /etc/name_to_major
added ds_snmp to /etc/name_to_major
added ds_pri to /etc/name_to_major
Installation of <SUNWcsd> was successful.
WARNING: /etc/inet/ipnodes <no longer a regular file>
Installation of <SUNWcsr> was successful.
After the rebooting the system with -r option I recognized a lot of worrisome messages in the syslog:
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'netstack_find_by_stackid'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/ipsecah: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'netstack_rele'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/ipsecah: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'ipsec_rl_strlog'
Nov 8 07:17:23 src@xps1pm krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'ipsecah'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/ipsecah: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'netstack_register'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/ipsecah: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'secpolicy_ip_config'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/ipsecah: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'kstat_delete_netstack'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/ipsecah: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/aggr: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'mac_capab_get'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/aggr: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'mac_free'
Nov 8 07:17:23 src@xps1pm krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/aggr: undefined symbol
Nov 8 07:17:23 src@xps1pm krtld: [ID 826211 kern.notice] 'mac_alloc'
Nov 8 07:17:23 src@xps1pm krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'aggr'
Although the system seems to be ok, I want to know whether those messages are normal or not. Has anybody experienced the same behavior?
Thanks in advance!!
Juergen
The warning messages during installation are not the problem. But what makes me worry is that some modules can not be loaded. Seems to be the wrong drivers for Solaris 10 kernel (or at least unsupported one). Even the path (/kernel/drv/sparcv9) to the modules says that they are for Solaris 9. Do I missunderstand something??
The following modules couldn't be loaded due to undefined symbols:
WARNING: mod_load: cannot load module 'trapstat'
WARNING: mod_load: cannot load module 'ipsecesp'
WARNING: mod_load: cannot load module 'ipsecah'
WARNING: mod_load: cannot load module 'aggr'
Would really appreciate any help! Thanks!
J�rgen
Similar Messages
-
Automatically build kernel module after kernel update
Hello. Everytime kernel is updated, my wifi drivers don't work. I need to use this to get my adapter working: https://aur.archlinux.org/packages/8192cu-dkms/ .
After kernel update, I have to manually reinstall the package, so the kernel module gets rebuilt. Is there any way to make it automatic?I noticed it, but your script doesn't run at all when I type `mkinitcpio -p linux`. And wifi still works after reboot. Same for graphics driver, it has a hook at shutdown, that rebuilds its module after kernel update, it haven't run too and graphics driver works. It's like 'mkinitcpio -p linux' does nothing to the system.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 4.0.4-2-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 4.0.4-2-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
Last edited by kox (2015-06-02 07:18:24) -
Automatic recompiling of kernel module after kernel update.
Hello everyone,
i tried to search for it but without success...
my question is - is it possible to set it up somehow that aur package would recompile after kernel update?
The package I would like to rebuild is rt3090 which is module for my wifi card. It is very annoying to rebuild it manually. I know that my fglrx module does it automaticaly but how to set it?
Thank all of you for any advise.Thank you :-) It looks ok, I will try DKMS as soon as I get some free time. If there was any problem, I would tell you.
BTW: I use catalyst mainly because of saving energy management, which is of course better for my netbook. My card is too new to be fully supported by the opensource driver.
EDIT:
I solved the situation by upgrading my system, I tried in-kernel module rt2800pci. In the previous kernels it didn't work well with my crappy ralink rt3090 wifi card, but that's been improved :-) so I do not need rebuild the package anymore even because this module isn't compatible with newest kernel.
I also learnt how to write my own hook from archwiki (https://wiki.archlinux.org/index.php/Mkinitcpio) so if the new module didn't work I would try it.
The final solution = replace module rt3090sta by rt2800pci.
Thanks! Arch has very powerful community :-)
Last edited by h@lf@rk (2012-06-02 18:34:17) -
[Solved] Can not build modules for VMware Player after kernel updates
I have a problem generating the modules for VMware Player after kernel updates. I am using VMware Player version 5.02 (without patches) and the softlink according to the Wiki.
When I start the installation of the modules from the GUI, the program just closes. Running vmware-modconfig in the CLI generates the following log file:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Log for VMware Workstation pid=7478 version=9.0.2 build=build-1031769 option=Release
2013-04-29T09:49:27.891+01:00| vthread-3| I120: The process is 64-bit.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host is Linux 3.8.10-1-ARCH 2012.11.29
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": Datei oder Verzeichnis nicht gefunden.
2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-04-29T09:49:27.891+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-7478.log
2013-04-29T09:49:27.892+01:00| vthread-3| W110: Icon name must be set.
Interestingly, after deinstallation and reinstallation the VMWare Player works fine.
Any hint, what's going wrong?
Last edited by Thomas_Do (2013-08-07 07:25:51)Today, (Kernel 3.10.5-1, VMware Player version 5.02 with kernel patches) the modules could successful be generated from the CLI:
vmware-modconfig --console --install-all
Solved (somehow). -
Lost network after kernel update
Hi
I have lost my network after kernel updating the kernel [2.6.35.7]
I downgraded to kernel 2.6.35.6
Sergekrychle wrote:
Hi,
I'm just reporting that I had this issue today too. I rebooted my computer from Win7 to Arch64 and I was left without network. Also it doesn't work in windows after rebooting back. I thought that It is something with connection so I tried to recoonect cable and also tryied to swap it in switch/adsl gateway. It started working after several switches (not on 1st!) It looks like interface is repeating on and off. So I rebooted to Arch and it stops working again...
I fixed it by reinstalling kernel26 package. But it is strange because it works yesterday, last thing what I did with kernel and modules was update of gc nvidia drivers... I don't know when I updated kernel last time
I'm using same network driver as Karol - r8169
lsmod | less
mii 3826 1 r8169
I'm using this card as well. I upgraded yesterday and I can't get wireless with WICD. Windows and normal network daemon work fine. I use kernel26. What other info can I provide? If a bug report needs to be filed, would it be WICD, kernel26 or other?
Also, I forgot, but I'm not using normal Wicd, I'm using wicd-nogtk from AUR. Krychle, are you using this also?
Edit: I think this has to do with the python update. I updated wicd-nogtk and its good now. I am online.
Last edited by Anonymo (2010-10-19 18:10:23) -
VMware player won't start after kernel update
Hi,
today I've updated to 3.9.6-1 kernel and all went good. So I wanted to start my vmware player to start a vm. Of course I've done the needed steps in the vmplayer wiki page to setup the new headers and stuff after kernel update for vmplayer. Also I've ran "vmware-patch -f" and ran trough. But still get an error when I wanted to start the player in the "/tmp/vmware-root/vmware-modconfig-11986.log":
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Log for VMware Workstation pid=11986 version=9.0.2 build=build-1031769 option=Release
2013-06-16T13:03:51.680+01:00| vthread-3| I120: The process is 64-bit.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Host is Linux 3.9.6-1-ARCH 2013.04.01
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: Msg_Reset:
2013-06-16T13:03:51.680+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory.
2013-06-16T13:03:51.680+01:00| vthread-3| I120: ----------------------------------------
2013-06-16T13:03:51.680+01:00| vthread-3| I120: PREF Failed to load user preferences.
2013-06-16T13:03:51.680+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-11986.log
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmmon module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmnet module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmblock module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vmci module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Reading in info for the vsock module.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Setting vsock to depend on vmci.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Created new pathsHash.
2013-06-16T13:03:51.687+01:00| vthread-3| I120: Invoking modinfo on "vmmon".
2013-06-16T13:03:51.689+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.689+01:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-16T13:03:51.690+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.690+01:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-16T13:03:51.691+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.691+01:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-16T13:03:51.693+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-16T13:03:51.693+01:00| vthread-3| I120: Invoking modinfo on "vsock".
2013-06-16T13:03:51.696+01:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
Maybe it has something to do with the last filesystem update?
But I don't know what to do really and couldn't found anything on that.
thankssorry, found something now in another thread here. this fix works just fyi:
kokoko3k wrote:
Quick and dirty workaround to fully update your system
sudo pacman -Suy #update everything
sudo mkdir -p /usr/local/lib/gtkmm && cd /usr/local/lib/gtkmm
sudo wget http://arm.konnichi.com/2013/01/05/extra/os/x86_64/gtkmm-2.24.2-2-x86_64.pkg.tar.xz
#sudo wget http://arm.konnichi.com/2013/01/05/extra/os/i686/gtkmm-2.24.2-2-i686.pkg.tar.xz #The bug affects i686 too.
sudo tar -xvf ./gtkmm-2.24.2-2-x86_64.pkg.tar.xz
#sudo tar -xvf ./gtkmm-2.24.2-2-i686.pkg.tar.xz #The bug affects i686 too.
LD_LIBRARY_PATH=/usr/local/lib/gtkmm/usr/lib/ vmplayer #start it with old libraries -
No sound after (kernel)update 64bit
Hey I just rebooted my PC the first time after the new kernel update.
Now sound is not working anymore at all... But the soundcard (Audigy 2 ZS) is still recognized (e.g. via alsamixer), and kmix does not give any error message. Everything seems to work fine, except the fact that there is no sound. Of course I already checked if I muted anything by mistake. Sound is working on Vista (dualboot), so the hardware is alright.
Any hint what could be the problem?
PS: I stressed the kernel update in the first line, because I strongly suspect it for being the cause of the problem. The other updates were not that important (samba...).
But I would like to hear other opinions.
Greetings, yodo
Edit: Ok, I manually compiled and installed an older kernel (kernel26-2.6.27.8-1) and sound is working again. It was definitly the kernel's fault! The version(s) I had (have) problems with were kernel26-2.6.27.10-1 and also kernel26-2.6.27.9-1 which I tried before kernel26-2.6.27.8-1.
Any other users with the same problem?
Last edited by yodo (2008-12-24 11:58:14)Black Mage wrote:I filled a bug report:
http://bugs.archlinux.org/index.php?do= … k_id=12561
happened to me two..
Thanks! But actually rebuilding the kernel did not fix anything (for me) - at least not rebuilding kernel26-2.6.27.10-1 or kernel26-2.6.27.9-1. Sound only works after a downgrade to kernel26-2.6.27.8-1 (or below I suppose).
Last edited by yodo (2008-12-24 16:59:43) -
Mounting issues after kernel update (2.6.25)
After installing the recent kernel update, mounting has gone haywire. When I put in a cd (in either of my 2 drives) it doesn't mount. In thunar, when I click on the cd drive, it displays this error:
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
I did dmesg | tail and I got this:
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1044216k swap on /dev/sda5. Priority:-1 extents:1 across:1044216k
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
UDF-fs: No VRS found
Also, when booting a few minutes ago, it was stuck on the "checking filesystems" for a few minutes, when it usually does that step almost immediately. I also couldn't mount an iso, this is what happened:
[root@eric-arch eric]# mount -o loop -t iso9660 /path/to/iso.iso /mnt/iso2
mount: could not find any device /dev/loop#
Note: I am not certain that it was caused by the kernel update, but that is the only thing I did to my machine before this started happening.
Please help asap because I need to do schoolwork which is on a cd.jealma wrote:I know the solution to the /dev/loop-problem. The new 2.6.25 kernel has the loop device as a module. Please try a `modprobe loop`, that gives you a /dev/loop. I don't know whether that will be persistent after a reboot, so you may need to add "loop" to the modules-list in /etc/rc.conf.
That worked, but I still have other issues with cd mounting, so I downgraded my kernel for now. -
VirtualBox does not start correctly after kernel update
Just recently I have been unable to start VirtualBox after a kernel update. That is to say it seems to be running, but displays nothing.
The following processes are listed: VirtualBox, VBoxSVC, VBoxSVC, VBoxXPCOMPCD
The following modules are loaded: vboxdrv, vboxnetflt, vboxnetadp
Yesterday, when the same thing happened, I reinstalled VirtualBox and it worked correctly again.
I recently upgraded to systemd which has caused me some other problems, so that might have something to do with it
Cheers
Andrew
* Arch x86_64 up to date, NVidia proprietary drivers, AMD processorUpdated - Rebooted (systemd does hang on reboot or shutdown but turned PC off and restarted)
Confirmed that vbox modules are loaded:
vboxnetflt 16807 0
vboxnetadp 18419 0
vboxdrv 1823469 2 vboxnetadp,vboxnetflt
Started VirtualBox - nothing displayed.
ps -el shows
0 S 501 1036 614 0 80 0 - 111245 futex_ ? 00:00:00 VirtualBox
0 S 501 1050 1 0 80 0 - 29408 poll_s ? 00:00:00 VBoxXPCOMIPCD
0 S 501 1056 1 0 80 0 - 53178 futex_ ? 00:00:00 VBoxSVC
output as above
$ uname -a
Linux ezcool 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64 GNU/Linux
# pacman -Qi linux
Name : linux
Version : 3.6.4-1
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.6.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia virtualbox-host-modules
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 61124.00 KiB
Packager : Tobias Powalowski <[email protected]>
Architecture : x86_64
Build Date : Mon 29 Oct 2012 09:55:27 CET
Install Date : Wed 31 Oct 2012 12:28:40 CET
Install Reason : Explicitly installed
Install Script : Yes
Description : The linux kernel and modules
# pacman -Qi virtualbox-host-modules
Name : virtualbox-host-modules
Version : 4.2.4-2
URL : http://virtualbox.org
Licenses : GPL
Groups : None
Provides : None
Depends On : linux>=3.6 linux<3.7
Optional Deps : None
Required By : virtualbox
Conflicts With : virtualbox-modules
Replaces : virtualbox-modules
Installed Size : 168.00 KiB
Packager : Evangelos Foutras <[email protected]>
Architecture : x86_64
Build Date : Mon 29 Oct 2012 17:23:20 CET
Install Date : Wed 31 Oct 2012 12:29:06 CET
Install Reason : Installed as a dependency for another package
Install Script : Yes
Description : Host kernel modules for VirtualBox
Kill all VBox processes, VBoxSVC does not quit but is marked (defunct)
Reload modules
Confirm modules loaded
vboxnetflt 16807 0
vboxnetadp 18419 0
vboxdrv 1823469 2 vboxnetadp,vboxnetflt
Start VirtualBox - nothing
pacman -Rdd virtualbox-host-modules
pacman -S virtualbox-host-modules
modprobe vboxdrv
Start VirtualBox - nothing
pacman -R virtualbox virtualbox-host-modules
pacman -S virtualbox virtualbox-host-modules
useradd -G vboxusers
Start VirtualBox - nothing
The problem seems to be something to do with nspr-2. I am getting multiple errors in the journal:
Oct 31 14:16:46 ezcool kernel: INFO: task nspr-2:1007 blocked for more than 120 seconds.
Oct 31 14:16:46 ezcool kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Oct 31 14:16:46 ezcool kernel: nspr-2 D 0000000000000246 0 1007 1 0x00000000
Oct 31 14:16:46 ezcool kernel: ffff8803d67b9d68 0000000000000082 ffff8803d65b0810 ffff8803d67b9fd8
Oct 31 14:16:46 ezcool kernel: ffff8803d67b9fd8 ffff8803d67b9fd8 ffff8804194a58b0 ffff8803d65b0810
Oct 31 14:16:46 ezcool kernel: ffff880300000041 ffffffff8119df46 ffff88042fffdb08 0000000000000001
Oct 31 14:16:46 ezcool kernel: Call Trace:
Oct 31 14:16:46 ezcool kernel: [<ffffffff8119df46>] ? mntput+0x26/0x40
Oct 31 14:16:46 ezcool kernel: [<ffffffff811251cc>] ? __alloc_pages_nodemask+0x16c/0x960
Oct 31 14:16:46 ezcool kernel: [<ffffffff81491a09>] schedule+0x29/0x70
Oct 31 14:16:46 ezcool kernel: [<ffffffff81491cd7>] schedule_preempt_disabled+0x27/0x40
Oct 31 14:16:46 ezcool kernel: [<ffffffff81490368>] __mutex_lock_slowpath+0x148/0x340
Oct 31 14:16:46 ezcool kernel: [<ffffffff81490576>] mutex_lock+0x16/0x30
Oct 31 14:16:46 ezcool kernel: [<ffffffffa001cbfb>] show_product+0x2b/0x60 [usbcore]
Oct 31 14:16:46 ezcool kernel: [<ffffffff8132cc90>] dev_attr_show+0x20/0x60
Oct 31 14:16:46 ezcool kernel: [<ffffffff8112146e>] ? __get_free_pages+0xe/0x50
Oct 31 14:16:46 ezcool kernel: [<ffffffff811ef969>] sysfs_read_file+0xa9/0x190
Oct 31 14:16:46 ezcool kernel: [<ffffffff8117f785>] vfs_read+0xa5/0x180
Oct 31 14:16:46 ezcool kernel: [<ffffffff8117f8aa>] sys_read+0x4a/0xa0
Oct 31 14:16:46 ezcool kernel: [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
Any ideas? -
Problems with key shortcuts after kernel update (can't shutdown wifi)
Hi! Sorry for my poor english!
I have 2 problems on my laptop that went out after a kernel update; the first one involves the wireless card (Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01), but I don't think it is important): when I press the key shortcut it switches off only partially, the led remains lighted and with "rfkill list all" i get that is actually only software blocked.
The second problem is about the key shortcut to switch off the screen: even with xev it isn't recognised anymore.
I am pretty sure the 2 problems are related; the latest kernel with they were working is 3.5.6-1, in fact if I downgrade to that version I haven't got any problem.
I have encountered this issue with 3 models of Asus EEEPC: 1015pd (mine), 1215b and 1015cx, (the first two with AR9285, the third with AR9485).
Thanks for the help ;-)Ok, so after removing catalyst-test and trying to install catalyst, I got the following error:
resolving dependencies...
warning: cannot resolve "catalyst-utils", a dependency of "catalyst"
:: The following package cannot be upgraded due to unresolvable dependencies:
catalyst
Proceeding to try installing catalyst-utils... -
Constant Java Runtime pop up message after Yosemite Update
After downloading Yosemite, a message keeps popping up saying " To view this web content, you need to install the Java Runtime Environment." I have already installed the Java update, but the message continues to pop every hour or so. Can anyone tell me how to get rid of this pop up message? I use google chrome as my main browser. My husband uses Safari and he gets the same message after updating to Yosemite.
Most likely, you have either the Facebook video calling plugin or the "NexDef" plugin for watching baseball streams. Both depend on the Java runtime distributed by Apple. If you no longer need the plugin, remove it. Otherwise, install Java.
-
CUCM Syslog Message ISSUE (kernel: Exceeded hashlimit)
Hello.
Our Customer using CUCM 9.0 (PUB :1 , Sub : 4) and 4 Voice Gateway Cisco 3945 (16 E1 PRI per each Gateway)
CUCMs have problem with syslog messages.
I saw these messages in rtmt syslog
- kernel: Exceeded hashlimit IN=bond0 OUT= MAC=34:40:b5:d5:63:e8:1c:e6:c7:52:44:40:08:00 SRC=130.1.254.27 DST=130.1.13.11 LEN=204 TOS=0x00 PREC=0x00 TTL=246 ID=19646 PROTO=UDP SPT=19200 DPT=30546 LEN=184
kernel: Exceeded hashlimit IN=bond0 OUT= MAC=6c:ae:8b:67:1a:28:bc:16:65:12:99:7f:08:00 SRC=130.1.254.27 DST=130.1.14.13 LEN=204 TOS=0x18 PREC=0xA0 TTL=253 ID=42621 PROTO=UDP SPT=26694 DPT=26842 LEN=184
What's the problem with these messages ?
And how can I solve this problem
Thanks.I used to have the same problem, it was a sip trunk against to one CME, just reset the sip trunk in CUCM it fixed the error. it is because the end poing is sending a lot of requests to CUCM
-
Wireless issues after kernel update
Hi,
after I updated my kernel yesterday, I've been having some issues with my wireless. I'm on a dell inspiron 1545, using kde and I use the broadcom-wl driver form the AUR.
Anyways. After I did a system update yesterday, it would refuse to load the wl module. So I recompiled the driver and that was fine. But still my laptop refuses to use its wireless card. At first I just couldn't connect to any wireless, now the networkmanager just claims that my WLAN Interface is unavailable.
the output of iwconfig:
lo no wireless extensions.
eth0 IEEE 802.11bg ESSID:"" Nickname:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:off
Retry min limit:7 RTS thr:off Fragment thr:off
Power Managementmode:All packets received
Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth1 no wireless extensions.
but if I try to run 'iwlist eth0 scan' it states:
eth0 Failed to read scan data : Invalid argument
I'm not that experienced with wireless, so I did what https://wiki.archlinux.org/index.php/Broadcom_BCM43XX says and some other pages I found on google. 'iwconfig eth0 up' doesn't have any influence.
As I said, before the upgrade it worked fine and I also had configured it as it is described in the link above.
thanks for any inputs,
tobilitemotiv: 'lspci | grep Network' :
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
.:B:. : I guess (and hope) that's the only relevant part (at the top and bottom):
at the bottom what's that "wl taints kernel"
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: PC Speaker as /devices/platform/pcspkr/input/input1
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
lib80211_crypt: registered algorithm 'TKIP'
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
sr 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
uhci_hcd: USB Universal Host Controller Interface driver
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: acpi_idle registered with cpuidle
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: AC Adapter [AC] (off-line)
Monitor-Mwait will be used to enter C-1 state
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
wmi: Mapper loaded
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:0c:00.0: setting latency timer to 64
usb 1-5: new high speed USB device using ehci_hcd and address 2
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
thermal LNXTHERM:00: registered as thermal_zone0
and maybe
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
start_kdeinit (3367): /proc/3367/oom_adj is deprecated, please use /proc/3367/oom_score_adj instead.
sky2 0000:09:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
tobi -
[Solved] Overheating/fan/sensors issues after kernel updates
Hi all,
I realise there has been a bit of correspondence on this already. I'm after some advice for my specific situation:
1. My laptop is an acer aspire 5315. I has well understood overheating issues that arrise due to BIOS problems
2. Fan control and temperature reporting worked perfectly with kernel 2.6.30, stopped working with 2.6.31 - I assume due to the well documented changes made in that release. The temperature only seems to be read once - at boot. sensors never reports a change after that; if the temperature is cold at boot the fan never get switched on. Unfortunately this happens most often.
3. I tried setting the recommended kernel option (can't relocate the post now). It didn't help :-?
4. I have tried upgrading the BIOS but the distribution from acer is a windows executable (won't run under freeDOS) and I do not have windows installed on this PC (not game to try under wine).
5. I re-installed the old kernel from my pacman cache only to find that my wireless no longer works (fan works just fine though).
I'm now totally stumped :-/
I'd like to update my bios and go with the latest kernel but can't see a way without installing windows.
This might be fixed in an ubuntu kernel release (https://bugs.launchpad.net/ubuntu/+sour … bug/453700) but I'd prefer not to do that switch... perhaps the same fix is coming to arch?
I'd accept having to pin the kernel to an earlier version but neet to get the wireless working.
help...
edit:
I've now managed to get the kernel backdated correctly (so that wireless works as well as the fan) by re-installing the kernel and firmware together.
Have configured pacman to igmore future kernel updates
If anyone has any suggestions on howto update my bios I'd be very greatful.
Last edited by drandre (2009-11-06 13:26:46)Hi,
Got exactly the same issue, after running for a while laptop justs goes off... going to try to regress kernel until issue is resolved
BIOS update does sound a bit extreme
MrG -
Locale Error Message After Todays Update [Solved]
I experienced an error message regarding something about cannot locale en-US.UTF8 after an update and reboot today.
I got rid of the error message by uncommenting:
en_US.UTF-8 UTF-8
en_US ISO-8859-1
in
/etc/locale.gen
Prior to fix:
$ locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
After fix:
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES=C
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
Didn't have time to check into this issue in much detail and would appreciate any additional info.Additional info?
glibc has been upgraded today. You probably haven't merged the pacnew files.
Maybe you are looking for
-
Disconnect Ethernet Cable and Plug back in causes IP to mess up
Yo, when i unplug my ethernet cable (say to move the computer) and plug it back in, my ip totally messes up, goes from 192.168.x.x ip with a 255.255.192.0 subnet mask to a 169.254.188.192 with a 255.255.0.0 subnet mask. I know in windows i could rele
-
HP Scanjet Professional 1000 Mobile Scanner not recognised snow leopard
hi I have purchased a HP Scanjet Professional 1000 Mobile Scanner The scanner however does not seem to work with ANY recognised scanner software for MAC. I have expensive Readyiris and Adobe X software with scan functionality but the scanner does not
-
My iPhone 3GS cant restore iTune software, I tried to update the last version and did ok , but when I try to restore the program a message said, no dispositive found.I see on the screen a usb and the iTunes icon indicator.
-
When I go to use Adobe Bridge and go to edit>find I can not find any files. It always comes up with no results. I have the box include all subfolders checked. I have also tried checking the box marked "find all files" and it still gives me no results
-
Help me with a bash alias [SOLVED]
I want to make a bash alias to `alias tailc=tail -n40 $1 | column -t` so I put that in my ~/.bash_profile but it does not stop after 40 lines. It goes for the whole file. What am I doing wrong? Last edited by maggie (2012-12-15 18:36:08)