Worse DVD quality in LCD TV than CRT

Hi,
I played the same Dvd, that I made with compressor and DVDSP, on a Lcd Tv and on a CRT Tv, in the latter it works fine, in the first one the images look worse with many artifacts and a bit blurry especially when the camera is zooming or panning.
I was wondering if anyone could help me to get the same quality.
This thing doesn't happen with retail Dvds.
Thanks for your reply!
Francesco

Hi,
I am actually using a Dual Layer DVD for the long form movie and also using an LG External burner.
I have two videos the first is 15minutes and the second, 1hour 10mins.
Both on separate DVDS and both look pixelated
Workflow
Export the movie from FCPX using Share and select Pro Res 422 creating a High Res Movie.
Import the movie into compressor and use the following settings
Video Format
Format = PAL
Frame Rate = 25
Aspect Ratio = 16x9
Field Dominance = Progressive
Quality
One Pass CBR - 7.8Mpbs
Motion Estimation - Best
Gop
Gop Structure = IP
Gop Size = 6
Frame Controls = Off
The Output leaves the video looking extremely blocky with no smooth lines, almost like http://www.softize.net/wp-content/up...e_vreveal1.jpg
Watching the videos back on my own 21" monitor I would have to agree. When I play any Hollywood DVD the quality is amazing.
I understand they use the best encoders in the world but surely with the source footage I have I should be getting a better quality video.
I was looking at CinemaCraft only to read - IMPORTANT ANNOUNCEMENT : WE have discontinued sale of all CINEMA CRAFT products, which promptly put that idea to bed.

Similar Messages

DVD Quality - LCD vs. PLASMA

How come DVD quality is different on a LCD than on a Plasma. I tested my DVD that I made using iDVD6, and on a LCD the quality is acceptable. Then when I play the DVD on a Plasma display the images appear very bright...almost unrecognizable.
Please help...do my original images need adjusting. How come the images are extra birght? I am handing out this DVD to many people and I need to make sure compatability isn't going to be an issue.
Thanks in advance for the help guys!
Eddie K

Hi Ed,
<Spock mode on>: well, one monitor shows correct content, the other not... what is in both cases identical? the dvd. so, pure logic exclude the dvd misbehaving, doesn't it...?
<Spock mode off>
it is easy to create ugly looking DVDs with iDVD (as long as the input is "ugly"), but as long as your TFT shows acceptable results, why should the dvd been authored wrong??! the few tests I remember told us, iDVD does a ... good job (not exciting/tripleA/GoldenStandard...) but for a consumer product with that much convenience.... excellent.
did you calibrate both displays? (that is a long and boring process....)
you did in both cases use the same dvdplayer with same connection?
how do commercial dvds behave with both monitors?
in my humble opinion, Plasmas are often "mis-adjusted" (too much contrast, much too much colors... what do I say, COLORS!!! )

Better than DVD-quality on .mac - but which size?

Hi, that was what Steve Jobs said that there is the possibility to have better than DVD-quality movies on .mac Is this only with HD-cameras and material because they can´t be burnt at that resolution onto a DVD? Or is it also true with standard cameras? And which file sizes are we are going to expect while up- and downloading such movies? Are they even playable for the average internet user?
Thanks in advance for clarifying - Christoph

Steve may have left out the word "current" when he mentioned better quality than a DVD.
DVD's (currently) use MPEG-2 format and only the newest players can handle high definition.
Your Web based files can use high definition formats. Just like those HD trailers at http://apple.com/trailers
You can also publish larger dimension SD video.
Obviously the file size of these larger dimensions would require a fast Internet connection and a very patient viewer.

DVD Player: Poor tolerance to less-than-ideal DVD quality?

"Real world" DVDs from rental stores have surface scratches, fact of life AFAIK most DVD players handle most of these fine. (With the odd exception, naturally.) I have had 6 consecutive DVDs that "broken down" on being played using Tiger's DVD Player (10.3.9). At first I blamed the DVD quality, but now I suspect I should be blaming Apple's software for not handling "real world" standards--?
Its a bit hard to believe 6 in a row are faulty, or the store would be getting a rain of abuse. Currently, I'm getting more more DVDs that "break down" than that play right through...
I'd welcome other's experiences: is "normal" for Apple's DVD Player? Do "set top" DVD players perform better? If so, why? Etc, etc.
Basically, I'd like to get the low-down on what's up. I'm thorougly sick of finding my movies "stall" on me, it makes the whole thing pointless after all.

While I could try a cleaner, I'm doubtful that this is the problem: the stalls occur in essentially the same places on replaying the DVD, even after ejecting and re-starting the movie. I would have thought a dirty lens would show a more random pattern of issues--?
(Excuse the very slow reply: I've been trying over a couple of days to post when Apple's forum is actually working for me!)

DVD quality

Sorry for my poor english.
I 've made a 94 minutes imovie (ilife 11) project with my brand new retina.
But when I make a dvd from idvd of the imovie project, I get a bad quality film (worse than before with the old imovie).
I try to save the project for a double layer dvd to avoid compression but I get the same bad quality.
Thanks for your help.
olivier

Hi
There are many layers to this Question - May be You find help here
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is interlaced Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
• iMovie'08 or 09 or 11 - CAN NOT DELIVER THIS any way know - as they all discard every second line when going from Event's to Project's = Can not be mended.
• iMovie HD6 - Can deliver 100% of what any DVD authoring program needs - and so can -
• FinalCut - any version
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Bad DVD quality

Imported video as "large" from Sony HDR SR12. burned a DVD using Toast 11. I realize Std def on a 40" LCD is not ideal but I expected better. I have Blu ray and plan to burn HD or BD but some friends do not. Render the movie in Imovie and then burn or import the raw footage into Toast and burn? I tried to increase the Mbps to 7-8 in Toast but that extended my approx 1 hour video to 2 disks needed? I otherwise tried to use the best quality settings. Any tips appreciated!

Hi
May be my notes can give an idea ?
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start. (Share to Media Browser and as Large (not HD or other res.) (I never use "Share to iDVD" any version of iMovie)
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

One Step DVD quality

I have been reading the posts about using IMOVIE09 and then using IDVD. I understand the quality is not great because of IMOVIE09 and the way it does the import.
IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
Thanks

Hi
IS the quality better if I skip IMOVIE and use the One Step DVD option in IDVD directly? I am importing Mini-DV tapes.
YES !
else on Quality and iDVD - my notes
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

DVD Quality Sucks

I shoot weddings in HD with a SONY HVR-Z5U and edit them in Premiere Pro CS6 using the correct settings and then use the Adobe Dynamic Link to import them into Encore CS6. I use the DVD and Blu-ray presets in Encore. The Blu-ray discs have a sharp clear quality but the DVDs look awful. If nobody is moving the video looks fine but my videos are mostly long shots of dancing and everyone looks blurry and pixellated. They look much worse than my old wedding DVDs looked on the older 4x3 TVs. I did tests with the same scene on a 2 hour video, a 2 minute video and with Maximum Render Quality checked and I even tried exporting an mpeg2 from PPro and importing that into Encore but I saw no difference. How can I improve the DVD quality?

sneedbreedley wrote:
Well I use the Automatic DVD Setting so how do I change the Automatic DVD Setting from "Lower" to "Upper" field? I can't even find these settings to change them.
So the field order for the default transcode settings can't be changed. Instead, select the asset in the project panel and go to the File menu:
Jeff

What are the best asset formats to optimise DVD quality?

Hi Guys
Some of my clients have been complaining about the DVD quality they received from me, and I wondered to myself how can I improve in future.
I just want to confirm if these are the best formats for each asset:
1) Video - AVI format (as opposed to MPEG2)? The major irritation I find about AVI is that it eats up lots of disc space, and it takes a lot of time as far as transcoding in encore is concerned.
2) Photos - TIFF format (as opposed to JPEG)? Same story as above regarding disc space.
3) Audio - AIFF format (as opposed to MP3)? Same space problem as the first 2. Furthermore, my major annoyance with WAV files is that you have to know which version of WAV files are the best quality.
Now, I do not what TVs most of my past and future clients own, i.e. a normal 4:3 TV like mine or the 16:9 plasma ones (although the trend these days seem to be LCD TVs). What is the best aspect ratio to use that will work on most TVs?
Also, I use a Sony 30g HDD video camera to record events. I like it since these is no hassle about carrying tapes or DVDs around. But, the problem with the camera is that MPEG2 is the "highest quality" it can record events; my still camera can take jpeg's as the highest quality. And the photos on the DVD look - most of the time - OK in terms of quality. It's only in my last DVD that I built that I saw some of the photos having some sort of problem in the slideshow (something like a water effect on the blazers and shirts of some of the audience - definitely unwanted).
To edit my assets, I use:
1) Power director 6 (for my video). I know you are going to say I should use Premiere Pro. I'm still reading the manual for PPro2 and Ppro doesn't have SVRT like PD6 does.
2) Photoshop elements or Fireworks (for my photos). Photoshop CS2 looks very complex for me at the moment - will learn later.
3) Adobe Audition (for my audio).
All I want is to have the highest quality possible. What's the best advice?
Thanks for all your help guys.

Since you raised the question of Hi8 versus DV tape formats, here are a few thoughts intended partly for you and partly for those who (unlike you) may be planning to get their first camcorder and are wondering about the different formats available.
Hi8 is a second-generation analog format that was marketed starting about 1988 to permit better resolution than the original VHS and Video8 camcorder formats. It was superseded about 1995 by the digital video, or DV, format.
Hi8 produced video of decent quality and was a good capture medium for material that was going to be distributed on VHS or SVHS tape. But the quality of DV is better, and DV has enormous advantages for editing and distribution. In particular, DV has absolutely no "generation loss" when transferring from tape to computer, from tape to tape, or from computer to tape, and it permits sophisticated editing using any one of many "nonlinear editing" applications that are available on PC's or Macs. Once you have edited your video using one of these applications, you may proceed to "author" your DVD's (i.e. add menus, etc.) and they will be of surprisingly high quality.
In mentioning Hi8 you may actually have been thinking of the Digital8 format. This is a format developed by Sony as a bridge between the older Video8/Hi8 world and the DV world. It is logically identical to DV but it uses the same physical tape as Hi8. This tape is now customarily labelled "Hi8/Digital8" to emphasize this fact. Hi8/Digital8 tape is less expensive and reportedly more robust than DV tape.
In principle Digital8 is just as good a format as DV. However, Digital8 has been targeted at a lower end of the market than DV, so even the best Digital8 camcorders may not have as good optics, as good sensors, or as many features as the better DV camcorders.
A few years ago, many people would recommend Digital8 as a very practical format for someone just getting started in video, since it was available at lower price points than DV, was identical in quality as regards format and perhaps better in value as regards camcorders, i.e. Digital8 camcorders were less expensive than DV camcorders of the same quality. Above all, Digital8 was ideal for someone who had previously used Video8 or Hi8, since the early Digital 8 camcorders would play back analog tapes and so could bridge the transition to digital. In fact, by buying or borrowing a second Digital8 camcorder, you could play back your analog tapes from one camcorder and record them as digital tapes using the other camcorder, forever after enjoying the advantages of the digital format.
At the present time, however, DV would be a much better choice than Digital8. Most (or all?) recent Digital8 camcorders have abandoned the ability to play back analog tapes. Only one or two manufacturers are making Digital8, and their offerings have dropped to a handful in recent years. This hardware will quite likely cease to be available in the near future, though the tapes will probably be marketed for years. When your present equipment wears out you would not want to be left with a library of family videos in an unsupported physical format.
In the last few years the DV format itself has been superseded by various high-definition formats, especially by HDV, a format that records to the same physical tapes as DV, at the same bitrates as DV, but, thanks to much greater compression, with twice the horizontal and more than twice the vertical resolution of DV.
Another format using even greater and more sophisticated compression, AVCHD, promises similar quality as HDV with even greater horizontal resolution, although the implementations of AVCHD available now are probably not as high in quality as the best HDV, and are certainly much harder to edit.
Despite the emergence of high-definition formats, there are good reasons for some people to prefer standard-definition DV at this time. One reason is cost. A good HDV camcorder -- the Canon HV20 is probably the best consumer model right now -- is likely to cost $1,000 or a bit more, while good DV models cost a few hundred. A second reason is low-light capability. The imaging chips for high-definition have many more pixels than the chips for DV. If the lenses are the same size, then these pixels must be crowded into a sensor about the same size as that of a DV camera, meaning that each pixel must be smaller and therefore less responsive to low-light conditions. So a good DV camera may be much better in low light than even the best high-definition camcorder of the same size.
Camcorders are now available that record direct to DVD (NOT advisable as John Smith said: the DVD medium is not robust for long-term storage and the necessary MPEG2 compression robs your source video of the quality it would have on tape and is much harder to edit).
Camcorders are also available that record directly to hard disk. Depending on the implementation, and your handiness with computers, thes might be just right FOR SOME USES. In particular they permit much more rapid turnaround between shooting and editing, so they might be right for something that is needed quickly but where archiving is not important (for example, shots of a football team at practice). But (as you have undoubtedly discovered with your 30gig Sony) you must download the material from camera to hard drive when the camera fills up, and this is not as easy as putting in a new tape. Also, the file may not be stored on disk in the relatively uncompressed, and easily edited, DV format. Finally, no hard drive is as safe a storage medium as a tape. With a hard drive and especially with a DVD, you risk losing everything to a crash or scratch; with a tape, you risk at most losing a few frames to a dropout caused by imperfections in the media.
Only you can balance all these factors knowing the type of things you will be shooting, how you will view or share your videos, and what you plan to do with them in the future. Note that DV can be edited together with HDV by many editing programs, though either the quality or the size on screen or both will be noticeably different. Also note that the high-definition formats are all in the widescreen 16:9 aspect ratio, like the newer TV's, while DV was originally 4:3 and may be available in 16:9 but with the additional width achieved by stretching the same number of pixels and possibly by using a smaller fraction of the imaging chip.
I would recommend that you search for articles and forums about camcorders to learn what is available. There is a lot of information out there. As for me, I would certainly not recommend Hi8, or even Digital8, at this time. Choose DV if you have a pressing reason for it, such as cost or the need to get good images in low light; otherwise make yourself more future proof with HDV or AVCHD. They will produce high-quality DVD's when "downconverted" when capturing them into the computer or when exporting them from the nonlinear editor or authoring program (experiment to find which method is best). Unless you are using AVCHD, which is not a tape-based format, stick with tape (for now) if you are concerned with long-term storage.
Best wishes!

Imovie - dvd quality

Whats the very best quality you can get from exporting from iMovie...my filming is on a mini dv camera...whats best to export it to get best playback quality on a dvd? i dont understand the compression and codecs...lesley

DVD Quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like "Brushed Metal" in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use "Share/Export to iDVD" = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie'08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast(tm) to make an as slow burn as possibly e.g. x4 or x1 (in iDVD'08 or 09 this can also be set)
This can also be done with Apple's Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can't get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play's on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don't burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don't playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
• Roxio Toast(tm) 10 Pro incl. BD-component
• BD disks and burner if full length movies are to be stored
• BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie'08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD'08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything bittons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don't let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

DVD quality poor.

Created a project in Encore with a MP4 file. DVD quality very poor. Very pixilated. Tried multiple settings. Bitrate etc... Did same project in FCP, 100% clearer.

Joe Video wrote:
Original recording with a JVC HD cam GY HM 650.
1080 60i Quicktime
File directly imported into Premier from SD card.
Edited and saved.
Premier monitor picture quality excellent, even full screen.
Exported – Media - H.264, MPEG 2 DVD, MPEG2, MP4
Results the same.
I even tried importing the original clip from the SD card into Encore and the results was the same.
In the Encore monitor, original layout with monitor small, you can see the pixels and the unclearness of the video.
Not even close to the quality with the Premier monitor
I am using a MAC Pro tower, dual Xeon processors, Apple 27” display.
Thank you again…
What codec is the camera quicktime please? a MOV file is a container, and the source in it could be nigh on anything from AVCHD (unsuitable for editing), Long GOP MPEG, lossless, and anywhere in between.
Besdt approach (in addition to the excellent advice from SafeHarbour) is to import into Premiere and create a new sequence from the clip - this will make sure the sequence settings match the source - and then output (at least this is how I would do it) to an interim SD file first rather than scaling & data reducing at the same time. Use at least an 8-bit file, and I recommend the Aja 2VUY codec.
As to why the difference in the onscreen monitors - are they set up right? I got bitten by this one once, and it turned out the in the hamburger settings (the funny little icon for settings on top right of panel) was set to automatic draft quality......
The biggest problem really is the source - why 1080i please? Will the camera not shoot 1080p?

DVD Studio pro vs iDVD: DVD Quality?

Do the DVDs made by DVD studio Pro look better than those from iDVD?
I have very good looking HD videos, made in iMovie: which look quite good as QT movies, but quality deteriorates a fair amount when iDVD makes it into a DVD. looking for better DVD product. Will I notice a difference with DVD Studio pro. kinda expensive if doesn't improve quality of final product.
roger

If you use the default compressor built into DVDSP it will probably be very similar to iDVD.
If you buy Final Cut Studio to get DVDSP you will also get an application called Compressor that allows for very high quality HD to DVD compression if you customize the presets.

DVD quality? No...

Were my ears deceiving me when Jobs stated during the keynote that non-HD rentals were now going to be full DVD quality as opposed to the 640 horizontal max res they were previously at? I just rented two movies: "Superbad" and "Underdog". Superbad satisfies the DVD claim, at 853x479 resolution (DVD's vertical res is 480, so this movie ends up being a higher-than-DVD res horizontally to accommodate computer 1:1 ratio - if any of you understand what I'm talking about)... so far all good. But Underdog is 640x264... This falls ridiculously short of DVD res.
So here are two questions...
1) Did they make a false claim, or did some stupid employee make a mistake regarding the 640x264 rental encoding?
and
2) Since the iPods are limited to a 640 pixel horizontal res - as far as I know - how would movies like Superbad and other DVD res or better movies fit on an iPod? Has some new firmware update for the iPods made that possible?

If you convert them properly then they play fine on an ipod. ipod to plasma TV also plays fine.

DVD Quality - Jumpy

Hi,
In the last 6 months the DVD quality has become jumpy when burning MPEGs to DVD using Premier Elements. Before this it was fine. I purchased a new camcorder but it hasn't improved. When I view the Mpegs on the computer they are fine, however after burning them to DVD and playing it in the DVD player (and a second one to test it), the quality is jumpy like it can't catch up when moving the camcorder. Do you think this is a problem with the computer's DVD burner, the software when compressing it to DVD or something else? I have always saved the movies as MPEG PAL Widescreen then combined several to make the DVD, is this what you'd recommend?

Hi
I haven't changed any of the setting in Premier Elements.
The camcorder is a Sony Handycam DCR-SR78E. Previously I had the DCR-SR52E which used to be fine for creating DVDs until earlier this year when I noticed the jumpiness. That camcorder's LCD lost part of its colour so replacecd it with the 78. I haven't changed Premier elements settings throughout this process.
The files are mpegs which I copy to the laptop using a cable from the camcorder and Windows Explorer to move them around.
Project settings are Editing Mode DV PAL, Timebase 25.00 frames/second. Frame size 720*576 16:9
Playback settings are DV25i (720*576), 24p Conversion method is Interlaced Frame, Desktop Display mode is Standard.
Capture format: DV Capture
Video rendering: Maximum bit depth (unticked), Optimize stills (ticked)
Default timeline: Video 3 tracks, stereo 3 tracks
I've noticed discussion http://forums.adobe.com/message/1753696#1753696 which also uses a Sony camcorder. Could it be the same issue?
Please let me know if you would like any further info.

"DVD quality" rentals really DVD quality?

During the "Stevenote" yesterday, Mr. Jobs indicated movie rentals would be DVD quality. Of course, some titles will be in HD, but for this question I am not concerned about that.
For those of you who have been able to rent movies, in your opinion are the movies true DVD quality? Or did he leave out the "near" prefix?
I bought a couple movies quite a while ago on iTunes, but there were noticeable artifacts, so I haven't purchased any since.

Well, I'll be. You are exactly right John. I just saw the Macworld article:
http://www.macworld.com/article/131580/2008/01/itunesmovierentals.html
The article quotes Apple VP Greg Joswiak (the obvious love child of Steve Jobs and Steve Wozniak) as saying the standard definition movies downloaded on the AppleTV are actually better than those downloaded onto computers (DVD quality versus near-DVD quality).

Worse DVD quality in LCD TV than CRT

Similar Messages

Maybe you are looking for