Would 1st gen mini screen work with 2nd gen mini with retina?

I just bought an ipad mini with retina display. I dropped it and cracked the screen up just a few days after buying it. I did not get the protection plan. Could I buy a replacement screen for the 1st gen mini and it work? I can't seem to find replacement screens labeled for retina display and I don't wanna pay apple $220 to fix it

I don't believe it will work, but I can't say for certain. You're on your own on this problem, though perhaps you can get assistance on http://www.ifixit.com.
Regards.

Similar Messages

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

What does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?

what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?

poobs wrote:
what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?
Nothing. The 2nd Gen Touch is OBSOLETE and is WAY past its support life. If you want to run the newer apps you have to buy a newer iPod.

I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

bjorth wrote:
apparently I have just an iphone 4 not 4s, so thank you.
It does seem rather odd that an app that was acquired thru itunes would quit working once it was incorporated into the device for all users. oh well it was probably free or $.99 when I downloaded it.
I would think that they were just testing it to see how many people would use it. But you might want to write a polite letter to Apple requesting a credit for the purchase price of the no longer supported app. That seems to be the least they could for one of their 'alpha testers'.

My iPad mini charger works but my iPad mini refuses to charge. What do I do?

My iPad mini charger works but my iPad mini refuses to charge. What do I do?

Try a different cable
Try to clean out the 30-pin/Lightning port on the device using a clean toothbrush (or similar) & blow it out. There may be dust/lint preventing proper electrical connection. The older 30-pin port is much more prone to dust & lint getting inside and it's internal conductors are very small. Clean the port out thoroughly and also the 30-pin connector on the cable.
Don't charge using the USB ports on the PC. Most PC's USB ports do not supply enough current to properly charge your device. A USB port (or the iPhone's charger) supplies 5 watts of charging current. The iPad Air's charger supplies 12 watts of charging current. Trying to charge your iPad with your PC's USB ports or the iPhone's 5 watt charger is like trying to fill a water bucket (iPad's battery) with a little toy squirt gun (PC's USB ports or iPhone 5 watt charger).
Instead, use the charger that came with the device and the cable that came with the device.

WILL THE 1st GEN DOCK WORK WITH 2nd GEN NANO?

as the title states.... i think it will, but if anyone knows or has a logical idea, let me know. thanks.

The 2nd Gen Nano does only work with Apples universal dock.
For this product, you will find an adapter.
If you (like me) have purchased a Nano (1st Gen) dock - aka the small dock without audio/video/ir - then the 2nd Gen Nano does NOT fit in. The connector is slightly shifted and due to the round edges, you cannot insert it.
kind regards
Tom

1st gen screen cracked - will 2nd gen fit?

Hi
I've just cracked my screen on my Core Duo 1.83Ghz. Devastation!!
I can only see 2nd gen screens on eBay, I know the housing is the same, but my question is will a 2nd gen (multi touch) screen fit it? I can find first gen screens for £400+ versus £150 for a 2nd gen!

The 2nd Gen Nano does only work with Apples universal dock.
For this product, you will find an adapter.
If you (like me) have purchased a Nano (1st Gen) dock - aka the small dock without audio/video/ir - then the 2nd Gen Nano does NOT fit in. The connector is slightly shifted and due to the round edges, you cannot insert it.
kind regards
Tom

Samsung MM-D470D mini-stereo & iPod Touch 2nd Gen

I recently purchased a Samsung MM-D470D mini-stereo with DVD player and iPod dock. The manual says it works with iPod Touch 2nd Gen, but when I plug mine into the dock, my iPod says "iPod Touch does not work with this accessory." The battery charges briefly until the message comes up. Samsung says to contact Apple, and of course, I'm long past my warranty date. The drivers on the iPod Touch are up-to-date and it works well otherwise.
Can anyone help? I have two more weeks to take the Samsung back and get something else, but I'd rather keep it because it's a nice unit and works well with my TV. Thanks!

Some other uses have reported problesm with accessories no longer working after updating the iOS on their iPods. Using the Comunities search function in the upper right, I would search for Samsung and see what you get.

ITunes 8.1 breaks syncing with 2nd gen iPod shuffle

So, I downloaded iTunes 8.1 as soon as it came out as all the new features seemed pretty benign, and I've never had issues with any iTunes update going all the way back to 1.0. However, the 8.1 update rendered my 2nd gen shuffle no better than a $5 MP3 player.
Keeping in mind I use my shuffle primarily for listening to podcasts, here's the issues:
+1) dragging files to the iPod that already exist on the device+
8.0: pops a dialog warning that some of the items are already on the device and gives you the option to skip those ones and copy the rest. I use this all the time as I just do a select all and drag everything in my Podcasts list to the iPod to get new stuff onto it
8.1: it gladly copies the duplicates onto the iPod again
+2) order of podcasts when added to the iPod+
8.0: podcasts get put at the end but when you disconnect, they get moved to the beginning of the play order on the shuffle and are arranged in the same order as the sort set on your Podcasts list (in my case, ascending Date Released). This was great as all the podcasts would end up right at the beginning of the shuffle in the order I wanted
8.1: podcasts get put at the end and stay there, in whatever order they were in from the location I dragged them from (i.e. the literal order they appear in the Podcasts list. So while in 8.0 they'd be arranged in date order regardless of whether different podcast subscriptions were mixed together, in 8.1 they were placed into alphabetical podcast order, subsorted by date)
+3) automatic removal of deleted podcasts+
8.0: a podcast deleted from the Podcasts list that's also on the shuffle will immediately cause a sync event and remove it from the shuffle
8.1: no sync event, deleted podcast stays on the shuffle until manually removed
+4) ability to play songs from the shuffle in iTunes when the shuffle is connected+
8.0: double-clicking a song that's on the shuffle by selecting the device and then its Music tab, plays it (and also causes immediate and constant syncing, which is weird, but also expected)
8.1: double-clicking a song has no effect. Selecting a song and clicking iTunes' play button does nothing
The problems are occurring on my Mac Pro. I initially upgraded to iTunes 8.1 via Software Update, but tried reinstalling via the standalone installer. No luck. I also tried restoring the iPod to factory settings twice with no luck.
I also did some tests on my MacBook Pro which still had iTunes 8.0 on it. The same "correct" behaviour was encountered on the MBP. As soon as I upgraded to 8.1 via the downloaded installer, the same "incorrect/broken" behaviour was encountered as on the Mac Pro. I restored the iPod in iTunes 8.0 and 8.1 and that still didn't fix the behaviour when using it under 8.1. Additionally, on the MacBook Pro I removed the iTunes library and started with a fresh one just in case there was something funky with it.
Anyone else having these problems? I know at least one person whose 2nd gen shuffle works with 8.1 as it always had, so I'm not sure what's up with my shuffle.

I'm having most/all of the problems mentioned here. As far as manually ordering tracks, that doesn't work either. As near as I've been able to determine, tracks are played in the order they were put on the Shuffle, no matter how you order them in the list. The only way I've been able to get them in the order I want them is to put them all into a separate play list, set the desired order, delete everything off of the Shuffle, then copy the whole play list onto the Shuffle. By the way, deleting tracks off of the Shuffle doesn't seem to generate a Sync event by itself. While the list window shows the total size of the items in the list at the bottom (and it decreases when items are deleted), clicking on the Settings tab shows a bar at the bottom showing the same amount of space being used before the deletion. You have to move something else to the Shuffle to make it Sync.
Also, the one problem I've experienced with 8.1 that I haven't seen anyone else mention is connecting the Shuffle and having it show files that hadn't played as having been played and other files that had played not showing as such. For example, say the last thing I did before disconnecting was to put 20 new files on the Shuffle at the top of its list. It will play them last because they were the last items added. But when I reconnect after playing 20 or more tracks, the list shows the top tracks as having been played including those 20 tracks that I hadn't gotten to.

Problems with 2nd gen 8 gig nano

I have just bought my 2nd gen 8gig nano thinking it would be plug in and play, but i cant get nothing working, i cant get it charging, i keep getting usb not recognized every time i plug it in to my pc or friends pc, i tunes dont see it. its just in a drawer with no songs on it, what a waste of my money! ive read all the support pages with no luck so if anyone can help please help me.

Welcome to the Apple Community.
Your Apple TV's may be experiencing interference, have you tried changing wifi channels.
Check your network settings are correct and try restarting your router. update the routers firmware if appropriate.
I'm assuming the 2 Apple TV's have different names.

Find My Iphone stopped working on 2nd Gen IPOD

Okay..until recently i was able to track my Ipod 2nd Gen on "find my iphone".. I have I cloud set up on my macbook, Iphone 4, Ipod 3rd gen and Ipad 2 with no issues. I have 2 Ipods that are both 2nd gen that used to show up but now one doesn't even show up and the other can't be located.
I have tried various things to try and fix it.
I have reset them IPODs
I have deleted the apps and reinstalled them
I have removed the info from my mobile me under the mail and calender area and reentered it to try and reactivate it.
Location services are on..I even turned them off and on again hoping that might trigger something.
I have tried everything I could think of and read and nothing works..
All software on the devices are up to date..I am at a complete loss at what is going on.. I have tried to locate them on my Iphone, IPad and Macbook and they don't show at all. Any idea would be appreciated.
Thanks

when they dumped mobile me. i just figured it out today. why can't we just log in with our apple ids vs. mobile me. ridiculous.

Need Help with 2nd gen shuffle

I recently purchased a 2nd gen shuffle from a friend. He used Mac and I have Windows Vista so I knew I would have to restore so it would configure to my Windows Vista machine. I did this, renamed and synced some music to it, charged it with no problem. My husband took it with him to work and listened with no problems. He completely used it til the battery went down and needed charging. I hooked it up thru high speed USB port. Itunes didn't recognize it, there were no lights...not even a red or orange light at all. My computer nor device manager recognize it and still no lights on the shuffle period. I've had it hooked up to different ports and no help. I have a nano that works perfectly thru the same port I used so I know it isn't the port. I've tried restarting the computer....no help. I saw the seperate program that you can download for restoring but it says it can't be used with windows vista so I can't try that. Does anyone have any suggestions for me? I really could use some help with this. Thanks in advance for any insight.

And you will have to take me seriously here but, by using the on/off switch, turn it on, count 15 Mississippi and turn it off, counting 15 Mississippi. Do this three times, leave it in the off position and reconnect the ipod to the dock, then the dock to the computer.
Let me know how it goes.

Nike+ official sportsband with 2nd gen

I'm using a 1st gen Nano with the Nike armband. I saw in Steve Jobs' speech that the 2nd gen Nano is actually smaller. Is it significantly smaller, or does it still fit the armband snugly, with the buttons aligned properly?
Thanks... this will factor in to my willingness to upgrade to 2nd gen.

I am using the same wristband (which has windows for the dial & screen so things have to line up) with my 2nd gen Nano that I was using with my 1st gen Nano. The 2nd gen is only SLIGHTLY thinner and narrower.

Synching problem with 2nd gen Shuffle

I've had a 2nd gen iPod Shuffle for several years and have always had it work well. But recently it has trouble synching when I plug it in. Whether using Autofill or synching manually, it will only synch from 1 to 4 or 5 songs at a time, and then stops, saying the synching operation is complete. Sometimes it will stop synching before the first song is complete. It does this over and over again with varying results. The only consistency is it never completes synching the entire playlist. I've gone through the reset procedure many times, but it still does this. I've double-checked all the other settings and everything should be set to go.
For reference, I have a 2GHz Intel Core Duo iMac with 2GB RAM and I'm running Snow Leopard and iTunes 10.2.1.

Yes to the "restore" question. I mistakenly referred to "resetting" instead. So I've already tried that, many times.
I'll take a look at a different port or cable, and if needed, I'll reinstall iTunes, but I don't expect it will make a difference - this exact setup used to work.
One other bit of background - Autofill works fine when I let the computer synch from my general "Music" library, that is, when it's working from its post-restore defaults. The failure happens when I want to put something else on the iPod, and it happens whether I use Autofill, or drag a whole playlist to the iPod, or drag several songs at a time to it.
In fact, there are only two times it works correctly, 100% of the time - when it Autofills from my "Music" library right after restoring, and when I drag a single song at a time to the iPod.

Remote issues with 2nd gen Apple TV. (locking up)

When using 2nd gen Apple TV with provided remote, I can only scroll through items or use on-screen keyboard for a few moments at a time, and then the remote seems to lock up. After a few seconds, I can move around again, but the cycle continues.
I can type a few words with on-screen keyboard or scroll through a handful of items at a time before the remote seems to lock up and not allow me to move around.

Try holding down menu and the left arrow for 6 seconds
http://support.apple.com/kb/HT3176?viewlocale=en_US&locale=en_US

New Nano doesn't work like 2nd gen iPod

When I powered off my 2nd gen iPod and then turned it back on, it would always go back into random play mode. If for example I was listening to an artist with 30 songs and wanted to go back to random play, all I had to do was power off and on and I was back at random play.
With my Nano, powering it off and on returns me to where I last was. The only way I know to get out of that artists play list and get random play again is to click through all the songs until they are cycled through one time. Then I get the main menu and random play again.
There must be an easier way. Does anyone know what it is?
Greg

I have shuffle set to on so I don't think that is it. There must be a way to get the iPod to go from playing only one artist to playing all of them again. Thanks for the reply.
Greg

Would 1st gen mini screen work with 2nd gen mini with retina?

Similar Messages

Maybe you are looking for