Would anyone know why my macbook says "USB device is drawing to much power" when I have my iPhone 4 plugged in?
When I have my phone plugged into either one of my USB ports, my computer sometimes will say "USB device is drawing to much power, to prevent damage the ports been disabled until the device is unplugged" or something along those lines...i was just wondering if anyone knew why...it does it to both ports.
Thanks
The first time it happened my cooling mat was plugged in, but its still been doing it even though it isnt anymore.
Similar Messages
-
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!
The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
-
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
When I plug in my iPhone to my iMac my computer flashes a box that says my USB device is drawing too much power from my computer and claims one or more of my devices have been disabled. Then it will not sync my iPhone 5. Any solution ideas?
Try unplugging any other USB devices. If you are using a hub, don't, connect the phone directly to a computer USB port.
None of these are necessarily things you should do, but might help. For instance, if you plug the phone to an already busy hub, the phone might be "the straw that broke the camel's back" and lock out the hub. -
Seagate drive quandary: "USB device is drawing too much power"?
I have a year-old Seagate external hard drive that when I plug in to a 2011 MacBook Air, it started saying something to the effect of "your USB device is drawing too much power and had been disable in order to aboud damage..." I had been using this drive for some time, and this just started a few days ago. I tried plugging it into a USB hub and directly into a USB on the MBA with the same result. So I plugged in into my brand new 2012 MacMini and got the same messgae. My initial conclusion: the drive is dead.
So I buy a new USB 3.0 Seagate compact external drive, plug it in and get the same error on my MBA and on the MacMini. If that isn't odd enough, I have the exact same Seagate model plugged into my MacMini as the backup drive with no problems. Any ideas?? Maybe I received a DOA drive by coincidence?
UPDATE: Tried the new drive on a Win7 PC and it recognized it fine. Why would my 2011 MBA and 2012 MacMini not recognize the new drive?MIght be something to help you here > USB Device Drawing Too Much Power
-
Because a USB device was drawing too much power from your computer - bla, b
In the last week or so, my iMac (Intel CoreDuo) started displaying an error message every 30 seconds saying "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled", followed by some other useless "explanations" (which BTW can't even be copy/pasted). This has happened before (for about a year now) at every startup, but that was more acceptable; now that the message comes every 30 seconds it renders this machine unusable.
I tried it with or without any USB accessories attached, with or without powered hubs attached, I reset the PRAM and SMC and reinstalled the OS twice. The only option I have left is to trow this machine out and buy a new one (believe me, it's not going to be a Mac).
This shows not only the lack of quality of the hardware (crappy logic board and USB ports) but also a complete disregard for the annoyance these constant popping messages create to the end user when designing the OS. Just while writing this message I had to press the OK button about 10 times. It's AWFUL!!!Hi cimula. before you turn to the extremes have you tried reinstalling snow leopard. maybe you had a problem occur when it was originally installed and is missing a driver or something. also take it to an apple store if possible. take everything needed to run the imac and show one of the geniuses the problem and 90% of the time if you are nice and calm they will gladly help and diagnose the problem even if it is out of warranty. no promises it will be free it could be a hardware malfuntion. just dont force your self back to pc once all of the problems are gone you will love it again. i switched from pc which i had been using my whole life after a friend showed me his macbook and have never looked back. of course once and a while there will an error, problem or whatever but is it worth switching to a pc which has to have a security program running 24/7 to stay alive and sucking up all of the cpu and slowing you down? hope i am helping Dean
-
Error message (Because a USB device was drawing too much power)
Hi Everyone,
Bought recently a new macbook pro 13 inch with Retina display with 120 GB flash drive.
Connected a non-apple CD drive to my macbook and after that started receiving this message: "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
initially I was receiving this message after I switch on my macbook but now after every 30 seconds this message pops up although I never connected anything to my macbook through its USB ports.
Will highly appreciate for your help on how to get rid of this problem.
Regards
HomayunTry resetting the SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
Hi,
I am getting this error since recently when I am using my MBP:
"Because a USB device was drawing too much power from your computer..."
The 'funny' thing: there is no USB device attached to the computer (only power and monitor cables).
Why is this happening and what could I do about it?
Appreciate your ideas?It's probably an internal hardware fault, but you can try this:
Intel-based Macs: Resetting the System Management Controller (SMC) -
i fix my iphone 5 to syn with my macbook in begging is ok after i have message in screen ,Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled
Unplug whatever other devices you also have plugged into USB, and try again. Better not to plug the iPhone into a USB hub.
-
Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?
Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3 -
I am trying to upload photos from my digital camera. Every time I try to plug it into my USB, the following error message comes up: "Because a usb device was drawing too much power from your computer, one or more of your USB devices have been disabled."
I don't have anything else plugged into my MBP, so I am confused as to what's going on. This problem has never happened before. MBP is less than a year old - about 9 months old. HELPGet a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
When I plug in my son's iPad I get this message "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I only have one charger for this iPad all my other chargers are for iPhone 4s. I have pluggerd it in different outlets around the house and the iPad will not charge. When I plugged it on my lap top to back it up it gave me the warning message. HELP!!
I have the same problem on my Air. The message first came up while my iPhone was connected to it for some time. Since then, it pops up ALL THE TIME, whithout anything being connected to the USB port, at what appear to be random intervals that vary between about one hour and a few seconds. I have tried resetting the SMC and the PRAM, but no results. A quick search revealed that thousands of users are facing this problem, but Apple has yet to provide a solution. Please help!
-
I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?
If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive.
Maybe you are looking for
-
How to use Schedule End Date in work flow
I want the delete pages from Page library after the "Schedule End Date" is reached. I used workflow, but the "Schedule End Date" column values always returns 1/1/1000 in workflow. I am unable to get the actual "Schedule End Date" value form the pages
-
Unknown operation calling a Web Service
I have a problem writting a Web Service client. I've tried with Stubs and Dynamic Proxy but both give me the same error when I call the WS method named 'Saluda' located in class DorsalSEI : Unknown Operation: {urn:Dorsal/wsdl}Saluda at org.WS.server.
-
Hi Everyone, I run the MSS iviews for employee viewer and they return this error: An exception occurred while processing a request for : iView : pcd:portal_content/com.debeers.fld.content/zpor_sysfldrCanada/com.debeers.roles.roles/com.debeers.zpor_fl
-
I'm losing photo quality...
I'm doing a photo slide show and everything looks great until I try and resize a horizontal photo. I lose all quality when I do it? I looks fine as I'm adjusting the image but as soon as I remove the curser off the page all the quality goes away and
-
Laptop screen not coming back on after closing and reopening lid.
I remember having this issue before but cannot seem to find the documentation that i used to fix this previously. I have a Dell b120 with an intel 915 igp When i shut the lid and reopen it, the screen remains blank. If i recall, it was something i h