Would like for URLs to be non-case sensitive

How can Contribute 6.5 make URLs to be non-case sensitive?

What do you mean exactly? What are you trying to accomplish?

Similar Messages

  • We have 4 iphones in our family and an Ipad.  When we purchase music I would like for the entire family to be able to use it.  Should each of us use a different apple account or should we use the same one.

    We have 4 iphones and an Ipad in our family. When we purchase music, I would like for the entire family to be able to use it and then back it up to Icloud. What is the best and cheapest way for this to happen.  Should we all have a different apple id or should we use the same one.

    You will all need to be on the same itunes account ID.
    You can however all have seperate icloud accounts aswel.

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • I have all my music under my user id.  i would like for my wife to have access under her user id.  i tried using Home Sharing but can't get it to work.

    i have all my music under my user id.  i would like for my wife to have access under her user id.  i tried using Home Sharing but can't get it to work.

    http://support.apple.com/kb/HT3819 homesharing
    http://support.apple.com/kb/TS2972 troubleshooting home sharing.
    i <3 Homesharing. I enabled it at home, and where I work I use a mac so I enabled it on that computer as well so I can listen to my own music library while on breaks/lunch =)

  • I have a Ipod shuffle 4th generation. I would like for the music to shut off after one hour long song automatically rather than go to the next song. Is this possible?

    I have an ipod shuffle 4th generation. I would like for the music to automatically shut off after one hour long song rather than going to next song on the list. Is this possible?

    Sorry, but it's not.  The only way to get this to work is to only put the one hour song on your Shuffle. 
    B-rock

  • I have 3 computers in my home and would like for all to b...

    i have 3 computers in my home and would like for all to be able yto connect to the internet using my linksys router.  the only one currently able to connect is the one he router is connected yto.  can you help

    Are the other two computers desktops or are they laptops with wireless cards inside?
    Message Edited by Deluxe8520 on 08-27-2007 12:32 PM

  • I have an ebook in ITunes that is showing up under Music more Genres Audiobooks, and I would like for it to go in the IBook app. I just added to my phone, is there a way to add this book to that app.?

    I have an ebook in ITunes that is showing up under Music>more>Genres>Audiobooks, and I would like for it to go in the IBook app. I just added to my phone, is there a way to add this book to that app.? 

    Sioux7 wrote:
    I have an ebook in ITunes that is showing up under Music>more>Genres>Audiobooks
    Audiobooks go in Music, not ibooks.   Is the book you are talking about not an audiobook but an .epub or some other format where you read text?

  • Would Like for two Iphones and Imac to sync calendars and contacts on Icloud

    I would like for my wifes Iphone calendar, contacts etc. to sync with my Iphone and Imac just like it did with Mobile me. Both iphones use the same Apple ID Will this work?

    The data should automatically upload from your phone when you turn syncing to On in Settings>iCloud.  You may get a prompt when you do this asking if you want to merge the data on your phone with the iCloud account (if you get this prompt choose to merge).  Also, after the data is uploaded, when you turn any synced setting to Off it should ask you if you want to keep the data on the iPhone or remove it.  Furthermore, if you just delete the account from your phone without turning off data syncing first, any data you are syncing with iCloud would also be deleted from the phone.
    Since you didn't get either of these prompts when you turned syncing on or off, and your data was deleted when you deleted the account before setting it up again, this all indicates that the data was never uploaded to iCloud in the first place.  Maybe it's just slow right now and it needs longer to upload your data to the account.  Maybe there's a problem with the server right now.  Suggest you turn off your data syncing in Settings>iCloud, then wait an hour or two and turn it back on and see if it uploads then.  (If you get a prompt when you turn it back on, choose merge.)

  • How can I backup data from a case-sensitive volume to a NON-case-sensitive volume?

    The case-sensitive volume in this instance being a desktop-mounted disk image volume.
    A tragi-comedy in too many acts and hours
    Dramatis Personae:
    Macintosh HD: 27" iMac 3.06GHz Intel Core 2 Duo (iMac10,1), 12 GB RAM, 1 TB SATA internal drive
    TB1: 1 TB USB external drive
    TB2: 2 TB USB to Serial-ATA bridge external drive
    Terabyte: a .dmg disk image and resulting desktop volume of the same name (sorry, I don't know the technical term for a .dmg that's been opened, de-compressed and mounted -- evanescently -- on the desktop)
    Drive Genius 3 v3.1 (3100.39.63)/64-bit
    Apple Disk Utility Version 11.5.2 (298.4)
    Sunday morning (05/08/11), disk utility Drive Genius 3's drive monitoring system, Drive Pulse, reported a single bad block on an external USB2.0 1TB drive, telling me all data would be lost and my head would explode if I didn't fix this immediately. So I figured I'd offload the roughly 300 GB of data from TB1 to TB2 (which was nearly empty), with the intention of reinitializing TB 1 to remap the bad block and then move all its data BACK from TB 2. When I opened TB1's window in the Finder and tried to do a straight "Select All" and drag all items from TB1 to TB2, I got this error message:
    "The volume has the wrong case sensitivity for a backup."
    The error message didn't tell me WHICH volume had "the wrong case sensitivity for a backup," and believe me, or believe me not, this was the first time I'd ever heard that there WAS such a thing as "case sensitivity" for a drive. I tried dragging and dropping some individual folders -- some of them quite large, in the 40GB range -- from TB1 to TB2 without any problem whatsoever, but the majority of the items were the usual few-hundred-MB stuff that seems to proliferate on drives like empty Dunkin' Donuts coffee cups on the floor of my car, and I didn't relish the idea of spending an afternoon dragging and dropping dribs and drabs of 300GB worth of stuff from one drive to another.
    Being essentially a simple-minded soul, I had what I thought was the bright idea that I could get around the problem by making a .dmg disk image file of the whole drive, stashing it on TB2, repairing and re-initializing TB1, and then decompressing the disk image I'd made of TB1, and doing the "drag and drop" of all the files in resulting desktop volume to TB1. So I made the .dmg of TB1, called "Terabyte," stashed that .dmg on TB2 (no error messages this time), re-initialized and then rebooted the iMac from my original Snow Leopard 10.6.1 disks and used Disk Utility to erase and initialize TB1 -- making sure that it was NOT initialized as case-sensitive, and installed a minimal system on TB1 from the same boot. Then I updated that 10.6.1 system to 10.6.7 with System Update, and checked to see that Disk Utility reported all THREE drives -- internal, 1TB, and 2TB -- as Mac OS Extended (Journaled), and no "case sensitive" BS. I also used Drive Genius 3's "information" function for more detailed info on all three drives. Except for the usual differing mount points, connection methods, and S.M.A.R.T. status (only the Macintosh HD internal, SATA 1TB drive supports S.M.A.R.T.), everything seemed to be oojah-***-spiff, all three drives showing the same Partition Map Types: GPT (GUID Partition Table.) Smooth sailing from here on out, I thought.
    Bzzzzt! Wrong!
    When I opened the Terabyte .dmg and its desktop volume mounted, I tried the old lazy man's "Select All" and drag all items from the desktop-mounted drive "Terabyte" to TB1, I got the error message:
    "The volume has the wrong case sensitivity for a backup."
    I then spent the next three hours on the phone with AppleCare (kids -- when you buy a Mac ANYTHING, cough up the money for AppleCare. Period.), finally reaching a very pleasant senior tech something-or-other in beautiful, rainy Portland, OR. Together we went through everything I had done, tried a few suggestions she offerred, and, at the end of three hours, BOTH of us were stumped. At least I didn't feel quite as abysmally stupid as I did at the beginning of the process, but that was all the joy I had gotten after two solid days of gnawing at this problem -- and I mean SOLID; I'm retired, and spend probably 12 hours a day, EVERY day, at the keyboard, working on various projects.
    The AppleCare senior tech lady and I parted with mutual expressions of esteem, and I sat here, slowly grinding my teeth.
    Then I tried something I don't know why I was so obtuse as to not have thought of before: I opened Apple's Disk Utility and checked the desktop-mounted volume Terabyte (Mount Point: /Volumes/Terabyte), the resulting volume from opening and uncompressing the .dmg "Terabyte".
    Disk Utility reported: "Format : Mac OS Extended (Case-sensitive)." Doh!
    Obviously, TB1, the 1 TB USB external drive I'd actually bought as part of a bundle from MacMall when I bought my 27" iMac, and which I had initialized the first day I had the iMac up and running (late November 2009), had somehow gotten initialized as a Case-sensitive drive. How, I don't know, but I suspect the jerk behind the keyboard. Whatever the case, when I created the Terabyte disk image (the drive's original name: when I erased and re-initialized it -- see above -- I renamed it "1TB" for quick identification), the original drive's "Case-sensitive" format was encoded too. So when I tried to drag and drop EVERYTHING from the desktop-mounted volume "Terabyte" to the newly initialized and "blessed" (now THERE's a term from the past!), the system recognized it as an attempt as a total volume backup, and hit me with "The volume [the desktop-mounted volume "Terabyte" -- BB] has the wrong case sensitivity for a backup." And, of course, the reinitialized TB1 was now correctly formatted as NOT "case-sensitive."
    Well, that solved the mystery (BTW, Disk Utility identified the unopened Terabyte.dmg as an "Apple UDIF read-only compressed {zlib}, which is why the .dmg file could be copied to ANY volume, case sensitive or not), but it didn't help me with my problem of having to manually move all that data from the desktop-mounted volume "Terabyte" to TB1. I tried to find a way to correct the problem at the .dmg AND opened-volume-from-.dmg level with every disk utility I had, to no avail.
    Sorry for the long exposition, but others may trip over this "case-sensitive" rock in the road, and I wanted to make the case as clear as possible.
    So my problem remains: other than coal shovel by coal shovel, is there any way to get all the data off this case-sensitive desktop-mounted volume "Terabyte" and onto TB1.
    Not that I know whether it would made any difference or not, one of the things that got me into this situation was my inability to get "Time Machine" properly configured so it wasn't making new back-ups every (no lie) 15 minutes.
    Philosophical bonus question: what's the need for this "case-sensitive," "NOT case-sensitive" option for disk initialization?
    As always, thanks for any help.
    Bart Brown

    "Am I to understand that you have a case-sensitive volume with data that you want to copy to a case-insensitive volume? And the Finder won't let you do it? If that's what the problem is, the reason should be obvious: on the source volume, you may have two files in the same folder whose names differ only in case. When copying that folder to the target volume, it's not clear what the Finder should do."
    Yes, I understand all that... NOW.
    What I had (have) is a USB external 1TB drive (henceforth known as "Terabyte") that I bought with my 27" iMac. I formatted, and put a minimal (to make it bootable) system on Terabyte the same day back in late November 2009 that I set up my 27" iMac. Somehow -- I don't know how -- Terabyte got initialized as "case-sensitive." I didn't even know at the time that there WAS such a thing as "case-sensitive" or "NOT case-sensitive" format.
    Sunday morning (05/08/11), Drive Pulse, a toolbar-resident utility (that's Part of Drive Genius 3) that monitors internal and external drives for physical, problems, volume consistency problems, and volume fragmentation, reported a single bad block on the volume Terabyte, advising me that it would be best if I re-formatted Terabyte ASAP. I thought I could open Terabyte in a Finder window, Select All, and drag everything on the drive to ANOTHER USB external drive of 2 TB capacity (henceforth known as TB2). When I tried to do that, I got an error message:
    "The volume has the wrong case sensitivity for a backup."
    First I'd heard of "case sensitivity" -- I'm not too bright, as you seem to have realized.
    Oddly enough (to me), I could move huge chunks of data, including a folder of 40GB, from Terabyte to TB2 with no problem.
    Then the scenario unfolded per my too-convoluted message: several hours of trying things on my own, including making a .dmg of Terabyte (henceforth to be known as Terabyte.dmg) -- which left me with the exact same problem as described in the previous 4 paragraphs; and my 3 hours on the phone with AppleCare, who at least explained this case-sensitive business, but, after some shot-in-the-dark brainstorming -- tough to do with only one brain, and THAT on the OTHER end of the line --  the very pleasant AppleCare rep and I ended up equally perplexed and clueless as to how to get around the fact that a .dmg of a case-sensitive volume, while not case-sensitive in its "image" form (Terabyte.dmg), and thus able be transferred to TB1 or TB2 with no problems whatsoever, when opened -- either by double-clicking or opening in Disk Utility -- produced a desktop-mounted volume (henceforth known as the volume "Terabyte," the original name of the case-sensitive volume from which TB1.dmg had been made) that had the same case-sensitivity as the original from which it was made.
    In the meantime, having gotten the data I needed to save off the physical USB "case-sensitive" volume Terabyte in the form of Terabyte.dmg, I erased and re-initialized the physical USB "case-sensitive" volume Terabyte, getting rif of the case sensitivity, and renaming it TB1. But it all left me back at square one, EXCEPT I had saved my data from the original "Terabyte" drive, and reformatted that drive to a NON- case-sensitive data now named TB1. The confusion here stems from the fact that problem case-sensitive drive, from which I made Terabyte.dmg, was originally named "Terabyte". When I re-initialized it as a NON case-sensitive drive, I renamed it TB1. I'm sorry about the confusing nomenclature, which I've tried to improve upon from my original message -- usual text-communication problem: the writer knows what he has in mind, but the reader can only go by what's written.
    So, anyway, I still have the same problem, the desktop-mounted volume "Terabyte" still cannot be transferred in one whole chunk to either my internal drive, TB1, TB2, as the Finder interprets it as a volume backup (which it is), and reads the desktop-mounted volume "Terabyte" as case-sensitive, as the original volume -- from which the disk image Terabyte.dmg was made -- had been at the time I made it. 
    "As long as that situation doesn't arise, you should be able to make the copy with a tool that's less fastidious than the Finder, such as cp or rsync."
    I'm afraid I have no idea what "cp or rsync" are. I'd be happy to be educated. That's why I came here.
    Bart Brown
    Message was edited by: Bartbrn
    Just trying to unmuddy the water a bit,,,

  • Copying folders & files from case-sensitive to non-case-sensitive volume

    I'm trying to copy a rather large (60+ GB), folder and all its enclosed items from a volume that is has case sensitive file names to one that does not. The copy operation always stops when it comes across a duplicate file/folder name differing only in the case of some of the characters. The folders/files in question are actually not duplicates, so I would like to change the file name of the duplicate by appending anything to the filename.
    The copy operation does not provide any choice but to abort the operation when it finds the first identical file or folder name differing only in case..
    Any suggestions?

    Unfortunately, that is not a viable solution, as I am tring to convert a case sensitive volume to a non-case sensitive volume.
    What I would like is a method to copy files and when a duplicate occurs it asks me what to do like rename the second duplicate. However this problem is now moot, as I painstakingly renamed each offending file/folder as each error occured, and then restarted the copy.
    While the question is not answered, I am marking it as such because I am now past the problem.
    Thanks for your response.

  • Making search non case sensitive

    Hi,
    I have implemented a search help which I have copied from standard help ‘PREM’. I have created a Database view, taking that View I have created an Elementary search help and I have assign the elementary search help in the collective search help ‘ZPREM’ which is copied from ‘PREM’.  In the search help I have two fields (NACHN, VORNA), which are case sensitive fields.
    How to make it Non Case Sensitive?
    Regards,
    Jitendra

    Hi ,
    without checking  "Lower Case" ,  any  case(upper/lower)  u are entering will be  converted to upper case internally and the respective data will be displayed .
    With checking the lower case check box in domain  , u will get the  exact  case  data  in which u have entered .
    but if ur requirement  is like ,   if u enter   a*  in VORNA  FIELD  and it should display
    a*
    A*     - ie. all the names starting with the both 'a'  or  'A'   ,   then
    You can go for Search Help Exit . Inside the function module catch the  entered  name and select  required records from DB as per ur requirement and insert  result  into  RECORD_TAB[]  internal table  , having  standard search help result  list .
    Regards
    DJ

  • BI BEx & WAD F4 Search: How to search non-case sensitive

    Dear Colleagues,
    is there meanwhile a better and comfortable solution for this problem, or have'nt changed anything since "How to... Search non-case sensitive" paper from 2003.
    Thanks and regards,
    Wolfgang
    Edited by: Wolfgang Taag on Aug 4, 2008 1:40 PM

    Hi Gerhard,
    I quote from OSS note 914303 :
    The BI search requires the TREX Server as of 7.0 Support Package 06 or higher. If the search engine is not fully installed, you can still use the standard search that the system carries out in the database. However, as a result, the search takes longer, <u>it is case-sensitive</u> and it does not support the search for attributes.
    Hope this helps,
    Best regards,
    Olav

  • How to ... Search non-case sensitive?

    Hello,
    prior to SAP NetWeaver 2004s we implemented the How to Guide "How to ... Search non-case sensitive" in SAP BW 3.5.
    This solution is no longer valid in BI 7.
    Does anybody know how to implement a non-case sensitive search in SAP NetWeaver 2004s BI?
    Regards,
    Gerhard

    Hi Gerhard,
    I quote from OSS note 914303 :
    The BI search requires the TREX Server as of 7.0 Support Package 06 or higher. If the search engine is not fully installed, you can still use the standard search that the system carries out in the database. However, as a result, the search takes longer, <u>it is case-sensitive</u> and it does not support the search for attributes.
    Hope this helps,
    Best regards,
    Olav

  • Ho to reformat to a non  case sensitive file

    How to reformat to a non  case sensitive file

    If you want quotes around all the fields, and you currently
    have quotes around
    none of the fields, you could probably do this using
    find-and-replace in a word processor.
    Open up the CSV file with 'word' or a similar word processor.
    The important thing is that the word processor must be able to do a
    find and replace on 'special' characters, like 'return'.
    Use find and replace to:
    Replace all 'comma' characters with the sequence: quote comma
    quote
    Replace all 'return' characters with the sequence: quote
    return quote
    You should then find that your CSV text has quotes around
    every record, but you'll have an extra quote character at the very
    start and very end of the file (on separate lines), which you'll
    need to delete by hand.
    Of course, make a backup of your data first - and this won't
    work if some of your columns already have quotes, or if some of
    your fields actually use the 'comma' character inside the field
    data.
    - Ben

  • Can i make the database passwords non case-sensitive ??

    Can i make the database passwords non case-sensitive ??

    Yes: set instance parameter SEC_CASE_SENSITIVE_LOGON to FALSE ( http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/initparams220.htm#I1010299).

Maybe you are looking for