Would like password authentication to install an application

Hello - I'm the administrator of our home computer and would like other users (with no administrator privileges) to have to authenticate a download from the internet (Safari, for example). A password is requested when the download is done through 'Software Update' but not let's say, downloading AOL instant messenger. It used to be that the file is downloaded from the internet but once an attempt is made to install, a dialog box requesting an administrator password pops up on the screen.
How can I activate that password request from Safari so as to discourage unnecessary 3rd party downloads by my other computer users?
Thank you!

See System Preferences->Accounts->specific account and establish Parental Controls, limiting what users can do.

Similar Messages

I would like to use the VoiceOver utility application to only speak the words i type in TextEdit-to speak nothing else. can it be configured to do this? thanks.

i would like to use the VoiceOver utility application to only speak the words i type in TextEdit-to speak nothing else. can it be configured to do this? i would like to use it as a substitute for my voice. thanks.

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

I am living in the UAE and I would like to download an install a Japanese version of Lightroom 6.

I am living in the UAE and I would like to download an install a Japanese version of Lightroom 6.
The only available version from the MENA store are English, Arabic, and French. And there is a region error when I change the region to Japan.

As I understand iTunes Gift Cards, they are for the specific country's iTunes Store where you acquired the Gift Card. To have an account in a specific country's iTunes Store the Terms of Use say that you must reside in that country, have a pernmanent billg address, not be visiting. It would be a bad idea to buy the iTunes Gift Cards. It would really complicate the authorization of the media in your iTunes library.

I would like to download and install Photoshop CS6 for Mac

I bought last year Photoshop CS6, and up to now I used it on windows system. Now I chaged system to mac, and I would like to download product Adobe Photoshop CS6, for mac - but when I try, I get offer for creative cloud membership for one year insted of photoshop cs6.
Can I some how get link to download photoshop cs6 for mac system? I already bought it last year, and I have serial number for mac.
This is message which I get, when I log in on my adobe id, and try to download software.
Message:
Adobe Electronic Software Download (ESD) Terms and Conditions
Evaluation Software. If the software you are about to download is an evaluation or not-for-resale version ("NFR Software"), then the license terms concerning evaluation software in the accompanying license agreement will govern your right to use the NFR Software unless youhave entered into an agreement signed by Adobe granting you alternative license rights. Further, until you purchase a license to the full commercial version of the software you may not use the NFR Software for any purpose except internal evaluation.The NFR Software will become inoperable within sixty (60) days of your receipt of the NFR Software.
Third Party Licensors. Adobe Systems Incorporated is the successor in interest to Accelio Corporation and all references in the software and related materials to Accelio Corporation or JetForm Corporation shall mean Adobe unless otherwiseprovided in the license agreement accompanying the software.
By clicking to download the software, you acknowledge that you have read and agree with the above terms.
The software you are about to download is subject to export control laws and regulations. By downloading this software, you agree that you will not knowingly, without prior written authorization from the competent government authorities, export orreexport - directly or indirectly - any software downloaded from this website to any prohibited destination or end-user.
Creative Cloud Team Ready Subscription Terms:
The Creative Cloud Team Ready offer (the “Product”) includes a one-year subscription to Creative Suite 6 Master Collection, applications such as Adobe Edge and Adobe Muse, and additional products, applications or features as may be added duringthe subscription term. The Product integrates with a variety of Creative Cloud hosted services and tablet applications, which require separate purchase.
By downloading and/or installing the Product, you agree to the following subscription terms, which supplement the applicable End User License Agreement. If you do not agree to these terms, you cannot download, install or use the Product, and shouldcontact your reseller to determine whether you are entitled to a refund.
The Product cannot be cancelled or returned once installed;
The Product will expire twelve months after it is purchased;
When a Creative Cloud Team offering is available, and provided you are current on your Creative Cloud Team Ready subscription, you will have the option of converting to a Creative Cloud Team subscription;
The Product must be uninstalled and deleted from all machines on the earlier of: when you convert your subscription to a Creative Cloud Team subscription; or (ii) when your Product subscription term ends;
Online services accessible via the Product are available only to users age 13 and older.
By downloading the Product, you represent that you are authorized to accept these terms on behalf of yourself and your organization and understand that your acceptance of these subscription terms applies to all deployments of the Product within your organization.
Accept / cancel

you can download here, http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
but you really need a different license/serial too, http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

I have over 85000 photos on a windows 7, photoshop elements 10. I would like to purchase and install elements 12 on an apple iMac. transfer tags, dates, etc. What steps are re

I have over 85,000 photos using photoshop elements 10, on an windows 7 computer. I would like to transfer them to my new iMac. I would like to install photoshop 12 on my iMac. How can I get my photos, tags, etc. on to my iMac?

oliver p
If your product is Photoshop Elements, you have placed your question in the wrong place. This is the Premiere Elements Forum (focus video editing).
If this is the case, please repost your question in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
Photoshop Elements
The following link is a good start to answering your question before you contact the experts at the Adobe Photoshop Elements Forum.
Use Backup, Restore to move catalog | Organizer | Elements 6 or later
Thank you.
ATR

Just bought myself a JamPack and would like some advice on installing...

In the form of the Symphony JamPack. It was quite a fleeting idea, and I just went in and picked it up from the Apple Store. I see it needs 10 GB... This is just for my MacBook, so really just for self amusement, and I'm running lowish on HD space. I don't care at all about the loops, does anyone know how much space it would give me to get rid of them? Also, any efficient ideas on how not to install them at all? Or do I need to fully install and then delete afterwards.
I can tell I'm not going to get much sleep tonight

Hi Freddie,
I have that jam pack and think it is an incredible value.
About your situation, I can't recall if there is a custom install option in the Installer. That would be the first place I would look if I were you. If there's not, then you will probably have to install everything and delete the ones you don't want, like you surmised. And don't forget to have about 20% of your hard drive as free space......
X

I am trying to load an old windows program in wine and I think that mozilla is marking the program as dangerous and I would like to unblock the install cd.

I have a program, astrodatabank, that I have been using since 2005 or so. The program ran well on Windows XP and Vista operating systems. I tried to load it into my desktop, which runs on the latest verison of Ubuntu. If I try to install from the disk, some of the exe files are not available. If I try to copy the files from the disk to a documents folder, the computer loads everything, except two .exe files. Last night, I got on an XP computer and was able to copy one of the files to a flash drive and copied that file to this computer, but AVAST on that computer decided the files were dangerous. I think I used to have the program installed on that XP computer. Is there a way I can get Ubuntu to let me load the last file and run the install program?

Hello, you need to contact the makers of avast, alwil software
* http://forum.avast.com/
Firefox is not a security program.

I always receive receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll have to click on run. Would like missing entry permanently installed on computer file

I always receive a message onscreen Error in C\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\DLCFtime.dll
Missing entry: Run DLL entry
I then click onto the run box below the message and then can access my homepage by double clicking on the Mozilla icon.
Can anybody tell me how to get the missing entry permanently into my programme files?

Probably problem with Dell printer,DLCFtime.dll is part of Dell printer driver software, maybe you must update the driver or re-install the software, read here for more information:
http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/missing-entry-run-dll-entry/dd6f8f71-ad23-4eff-8a9d-ac8b86d9a199
http://support.euro.dell.com/support/topics/global.aspx/support/kcs/document?c=uk&l=en&s=gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true
http://www.tek-tips.com/viewthread.cfm?qid=1396261
http://forums.majorgeeks.com/showthread.php?t=229356
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

I would like to know which postal code am I supposed to enter,while installing Skype,I'm unable to do it,as it's repeatedly asking for postalcode.

I would like to know,while installing Skype in ipad2, what is the postalcode tobe entered?

Where is this request for a "postal code" appearing? When you are attempting to set up an iTunes Store account to then download the Skype app? Or when trying to set up the app after it's already been downloaded?

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages

Try a search... I'm sure if you put forth a little effort you can find a solution that will work for you.

I just installed Mountain Lion on my iMac that was previously running Snow Leopard. Bugt I found that some key applications no longer work, so I would like to go back to snow Leopard. I can't use time machine backups for this. what can I do?

I just installed Mountain Lion on my iMac. But In was dismayed to find that my Canon scanner software (Canoscan LIDE500F)no longer works. Nor do any of my MS offce applications. I tried to use time machine to reinstall Snow Leopard (my previous operating system), but unfortunately my time machine backups did not include system software. Also, the original system install disk that came with my iMac would not allow me to install Snow Leopard in place of Mountain Lion. I would appreciate it if somebody could tell me how to solve this problem.

The reason your Office doesn't work is because it is PowerPC code. If you will upgrade the 2004 Office to 2011 Office then that will work.
I don't understand how you managed to get your Time Machine backup to not backup the system.
Now if you still what to downgrade you will have to erase the disk and reinstall Snow Leopard. Most likely all of your application and then restore your data from Time Machine.
To me it sounds like it would be easier to upgrade your software and stay with Mountain Lion instead.
Allan

In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

Just did a clean install of windows 7. I then downloaded windows XP mode and Windows Virtual Mode. Everything ran flawlessly and everything is updated. I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
XP for numerous reasons and one including it needing to use Microsoft .NET 1.0. I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP. The Install of the program went fine and completed.
Still being in Windows XP Mode I wanted to see how it would run. I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application. Once I clicked it the time glass on the mouse was there for a few seconds and
then went away without the application starting up at all. One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs? Any Ideas how
to get the program to run? Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that. Also this is the second application which I downloaded and the first being Microsoft
Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application. Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode. So Pretty Much My Main question is: Why
my application not starting up in Windows XP Mode? Any help is greatly appreciated!

Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
- The database files are marked as Read Only
- The program cannot access the data files (probably the folder it is pointed to does not contain any data).
- Or possibly the database path does not point to the right location where the data files are located
Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
close them. Then try opening Dentrix again.
Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
Drive). Dentrix really doesn't like UNC paths.
Dentrix 10.5 can only be installed on Windows XP
Microsoft .NET 1.0
Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
.NET 1.0.
Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

Windows on a Mac

I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusemen

I am no musician, but have owned an iMac now for around four years. During that time I have had Garageband installed. I have dipped in and out very occasionally as I would like nothing more than to be able to get my head around it just for my own amusement really. I would at least like to be able to record my electric guitar with loops and tracks etc, just try to be a bit creative and see what comes out. The problem that I have is that perhaps its me, but every time I try to get to grips with this software, I just can't seem to get my head around it, even to begin to do something. I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that. I have also recently purchased a Rocksmith RealTone Cable to connect my guitar. I can sometimes get a sound come out, but nothing to brilliant. And every time I try to set something up, it just doesn't seem to work out. I end up hitting buttons and controls in the simple hope that I may hit the correct control in order to get some sort of result. But I'm kind of fumbling in the dark with this. I have trawled the Internet just trying to find either a good manual or video tutorials for absolute beginners, but there just simply doesn't seem to be anything of that nature out there and what there is appears always to be very sketchy and not particularly detailed in explaining anything properly, and so I always find myself seemingly jumping in with both feet and just struggling to try and find a foothold with this on how to really begin. It is so frustrating as I can see the fantastic potential of this software, but just can't understand how to use it properly. If there is anyone out there who may be able to offer me some advice with this, I would be most grateful indeed... Many Thanks.

I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/

Would like password authentication to install an application

Similar Messages

Maybe you are looking for