Would like to be able to boot from my iPod

I have a 2nd generation FireWire iPod that I can boot from and love being able to do that to run disk utilities now and then. Just bought a new 30GB iPod with video and apparently I cannot install a system to boot up from it. I understand there is a cable you can get that goes from the USB to FireWire. Would that work to allow me to install a system on my new USB iPod and let me boot up from it? I would just keep my old iPod for booting up, but my husband wants to use it for music and expects me to erase it and fill it up with his music.

not only that, but Apple specifically recommends against booting from your iPod in a technote. You can put system files on there, but don't boot from it.

Similar Messages

  • I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

    Hello everybody,
    I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
    I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
    Thanks in advance for your answer.
    Yan

    Hello Chris,
    Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
    Thanks for answering so fast.
    Bye.
    Yan

  • Recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

    recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

    Are you sure? I restored my new iPod from the backup of my iPad and all app data was restored to the new iPod..  App data is part of the backup.
    iPhone and iPod touch: About backups

  • I would like to be able to sync from another ID on the same computer that sync now works on.

    I have a laptop running XP SP2.
    Sync was setup on this machine on an administrator account, and works fine. I usually run this machine from another non-administrator account. The device I am syncing to is an iPod Touch.
    I would like to be able to use my existing Sync account.
    When I start to add this device and am typing my email address in it does not let me complete the field.
    I am running FF4 beta.
    Could someone please assist me with this problem.

    When you try to use the Mac side on your external monitor do you get a blank screen or do you see the aurora background?
    It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

  • Is there a way to stop the OS from switching to a newly opened app?  I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.

    Is there a way to stop the OS from switching to a newly opened app?  I would like to be able to continue what I'm doing while I wait for an app to launch and not get interrupted by a forced entry into the app.
    As an example, I'm going to my email in safari, while I wait for it to load, I open an excel document, and the OS decides excel should be the front app, so I go back to safari so I can enter my login info, but halfway through my password the OS decides that excel is where I should finish typing my password.
    VERY ANNOYING.  Can I open apps in the background?

    Thank you everyone for the suggestions. J D, I'm not a terminal fan, but I'm sure it works.  I found a solution that I can use in the dock from another post. 
    Annoyed by Mac OS
    Works great and allows me to maximize those multitasking minutes.

  • I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each like in version 10.6

    I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each, like in version 10.6. It used to show the size at the bottom of the "window" for the selected folder,drive etc.

  • I have a macbook and it is a dual boot system, I would like to be able to see the mac side of the system on a larger monitor.  I can hook to a hdmi cable and see the pc side, but not the mac side, any suggestions?

    I have a macbook that I bought second hand.  The mac has a dual boot system with bootcamp on one side and snow leopard on the other.  I would like to be able to hook to a larger hdmi monitor so that in both systems I could see better since on the leopard side the computer has PS4.  I have purchased the dvi to HDMI accessory and purchased the HDMI to DVI cable, and can see fine on the bootcamp side, but nothing on the leopard side.  Could somebody help me with configuring things so that it will see both side? 
    Also on a minor note, I need to purchase a new battery for this item and don't know which one to purchase.  Any help would be greatly appreciated, especially with the display/monitor issue.
    Thanks Sue
    ps sorry but the operating system is OS X

    When you try to use the Mac side on your external monitor do you get a blank screen or do you see the aurora background?
    It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

  • How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view

    How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?

    SamanthaR22 wrote:
    How do I see my pictures that are in my aperture library in finder?  I would like I be able to select  photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?  [Emphasis added.]
    The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with.  "Picture" and "Photo" now mean different things in different contexts.  In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do.  Understanding is the path that allows us to do it.
    All pedantic, but please stick with me here  .
    You record a set of instantaneous data with a camera.
    That data is processed by your camera and saved to a file.
    The file format is usually either RAW or JPG.
    You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
    From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
    Aperture links the Image and the imported file.
    The imported file is called, within Aperture, an Original.
    Every Image has an Original.
    The Image is not the Original.  The Image is what you see in Aperture.
    The Original is a file that is stored on your computer.
    You can make changes to an Image.
    Aperture calls these changes Adjustments.
    Adjustments are saved to another file attached to the record in the database.  Let's call this file the Changes File.
    Aperture uses these two files attached to the record in the database to create the Image.
    Image = Original + Changes File.
    The Image is not a file.
    Because the Image is not a file, it cannot be shared with other programs.  It exists only inside of Aperture.
    In order to share an Image with another program, you must first create a file of the Image.
    You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
    You may ask, "Why all the complexity?  Why doesn't Aperture save Images as files?"  The answer is simple:  Images can require less — and in many cases very very much less — storage space than files of Images.  Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file.  The gain in storage efficiency is huge.  The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
    Here is your question reworded with more precise terms:
    SamanthaR22 might have written:
    How do I access Images in my Aperture Library in the Finder?  I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
    No, there is not.  Images exist only in Aperture, and are not accessible for use in other programs.  You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
    Aperture does allow you to create and save within your Library share-able files of your Images.  These files are called Previews.  You specify the file parameters in Aperture Preferences on the Previews tab.  These files are available to other programs via the OS X Media Browser.  These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
    HTH.
    —Kirby.

  • I would like to be able to enter my own page sizes to use in the Book Module, rather than choosing defaults from the drop-down. Is it possible to do this?

    I would like to be able to enter my own page sizes to use in the Book Module (to export to 3rd party printers), rather than choosing defaults from the drop-down. Is it possible to do this?

    No. You are limited to the choices within the Lightroom Book module.

  • I would like to be able to take a video from my camera and download it to several iPads for playback without using iTunes?  Possible?

    I am taking a video for high school and would like to be able to download on multiple iPads without using iTunes.  Is there an app that would aid me in doing this?

    If you have the Apple Camera Connection Kit (CCK) and the video that your camera generates is in one of the formats tha the iPad supports then you can directly move it to the iPad with a USB connection.
    See: Apple iPad Camera Connection Kit

  • I just upgraded to lion on my intel macbook.  I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen.  How do I do this?

    I just upgraded to lion on my intel macbook.  I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen.  How do I do this?

    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • SATA DVD RW should I be able to boot from this?

    I am having problems installing WinXP. I have a SATA DVD Rom, should I be able to boot from the WinXP CD to load Windows from this or do I need to use an IDE Rom?
    Phil...
    I'll get there in the end   

    Oh, sorry that I didn't write a full name. It's MSI K8T Neo-FSR.
    I'm not sure if it's too old, because the drive works with no problems in Windows and even during booting up I can see a text from RAID agent (or something like this, I'm not sure if it's a proper name) that my device is installed. The only thing, which doesn't work is fact that I can't choose it in Boot Sequence :(
    Does anyone have some ideas?
    I received an answer from MSI Online Customer Service. They suggested me to flash my bios with a version 2.34. Well, it seems to me a little bit suspicious as it is only available via ftp (on a website I haven't found this version). What's more, I am just afraid of destroying my motherboard. Flashing bios is always quite dangerous task. As I believe, you would recommend me doing this with The MSI HQ Forum Flasher?

  • I would like to be able to download updates for my Iphone and Ipad on my work computer but my home computer has all of my music on Itunes.  How do i downlaod updates at work without deleting all of the music which is stored on my home computer/Itunes?

    I would like to be able to download software updates on my Iphone and Ipad at work without erasing my music.  My home computer/Itunes has all of my music saved.  is there a way to use two computers w/o erasing information?  Or can i transfer the music from my Iphone to my work computer?

    - An iPod can only sync with one iTunes library. Yu can however manage music and videos among different computers by:
    Using iPhone, iPad, or iPod with multiple computers
    - To change syncing computer, move all the media to compute r#2
    - Connect the iPod to #2 and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup
    Note tha the iPod backup the iTunes makes does not include synced media like apps and music.

  • I would like to be able to edit MP4s in CS5.  I can not open the file. What am I missing?

    I would like to be able to edit MP4s in CS5.  I can not open the file. What am I missing?

    According to the publisher For GoSystem Tax, the 32-bit version of Internet Explorer 8, 9, or 10 is required.  Which means it can't be accessed from an iPad.  This seems weird.  I would recommend you contact the publisher.

  • I have 2 emails accounts and would like to be able to have them both open at the same time. Is this possible?

    I have 2 emails accounts and would like to be able to have them both open in Firefox in different tabs and be able to access each one. Now what I have to do is open one account in Firefox and open the other account in Internet Explorer. I would like to just use Firefox, if possible. Can you help me?
    Thank you,
    Phyllis

    hi melansonp, these 2 emails accounts are from one webmail or from 2 differents ?

Maybe you are looking for