Would like to change Websheet schema

I've been doing APEX Database applications for some time, but I am quite new to Websheet applications. My APEX version is 4.2.3.
It's important to me which schema a websheet application winds up with because it seems that websheet reports can only access objects (such as tables) that are under the schema of that websheet. Also when you create a new websheet you don't seem to have any control over the schema it uses. We have 2 schemas associated with our workspace schema1 and schema2. All of the APEX$_WS tables are under schema2 and the files we want to report on are under schema1. The APEX$_WS files were no doubt put in schema2 by me when I created my first websheet application, but at the time I didn't know about websheet reports.
I noticed that under administration> manage service > websheet database objects, there is an option to Remove Websheet Database Objects. I really hope I don't have to resort to this.
I have another question about websheets. In the application builder page which lists the applications in my workspace, I added a column, "Parsing Schema". I was hoping that this would give me some insight into the above question. For "Sample Websheet Application - AnyCo IT Department", the parsing schema is schema2. For a new websheet I just created, the parsing schema is schema2. But for my main websheet that I am most concerned about the parsing schema is jwomble, my username. How did this happen?
Jackie

Update. I solved part of the problem by granting some privileges to schema2 so that it can access the tables in schema1. That solves the immediate problem but in the long run I will probably still need to move the websheets over to schema1. I'm thinking about exporting the websheets, removing and recreating the tables, and then importing.

Similar Messages

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How may I change the format to enter new contacts? I need to add a business name and would like to change the defaults to work rather than home.

I am entering new contacts into the contact app. I need to add a business name and would like to change the default for phone numbers from home to work. I am entering a large amount of business cards

rcolbroth wrote:
Is there anyway of creatiing a different name for this Folder rather than 2013?
If you are using one of Lightroom's "date-based" folder templates, then the folders are created in accordance with the image capture date, not the date that you happen to import it. If you specifically want to use the import date for your folder names then you probably don't want to use the Lightroom date template, and instead you'll need to setup your folder names manually.
The vast majority of users that use date-based folder naming schemes will use a standard Lightroom template, i.e. based on the much more meaningful image capture date.

Bad XML from external web service and would like to change the content

I am getting a bad XML(not valid) from external web service and I would like to change the content of the body in OSB proxy service to make it valid.
For example
<g:Information xsi:schemaLocation="http:// bad schema" xmlns:g="http://abc.com/t.xsd">
<test>Test Data</test>
</g:Information>
should become
<g:Information xmlns:g="http://abc.com/t.xsd">
<test>Test Data</test>
</g:Information>
Do you how can I do this?

I don't think it would be the best solution but you may try -
1. Conver the incoming XML to string using fn-bea:serialize() function
2. Replace the not-required content with a blank
3. Covert the string back to XML using fn-bea:inlinedXML
If you find any other solution, please let us know.
Regards,
Anuj

Hi Apple Team, I would like to change the iCloud account on my iPhone, however it says I must 'delete the account' before doing so? Does this mean that I delete the entire existing account, or just delete it from my phone specifically?

Hi Apple Team, I would like to change the iCloud account on my iPhone, however it says I must 'delete the account' before doing so? Does this mean that I delete the entire existing account, or just delete it from my phone specifically?

From the iPhone only.

I would like to change my apple id to one of my alternate email addresses so therefore i would have to delete the alternate email address as an alternate email address and it says that if i do that it will permanently be deleted from my account

I would like to change my apple id to one of my alternate email addresses so therefore i would have to delete the alternate email address as an alternate email address and it says that if i do that it will permanently be deleted from my account so could i use that email address as my primary one?

The following article may help you:
http://www.ehow.com/how_8362857_rename-mailbox-apple-mail.html

Would Like to Change "appleuser" to my name but don't know how. Help?

Hi,
For starters, I have a late 2009 Macbook (white) and am running Mountain Lion (10.8.2). Anyway, I purchased this computer off of someone else and I would like to change what I assume is the home directory (little house logo) from "appleuser" to my name. Unfortunately, I can't seem to find anything online that is helpful to me. I saw one thing that talked about changing the root login or something like that, but I couldn't even find it when following the steps that were given.
Anyway, like I said I bought the computer off of someone else and seeing the "appleuser" drives me insane so I'd like to change it. Anybody know how?

Open the Users & Groups pane of System Preferences, create a new user account, and log in with it; alternatively, after unlocking the pane, control-click that account, choose Advanced Options, and change it there.
(75190)

I would like to change my apple ID because i Dont use the email address that is currently attached to my Itunes How do i go about this

I would like to change my apple id to a different email because the one i am currently using I dont use as my email address anymore but we I tried to change it in manage apple ID it said I already have that email address as one of my accounts but I never created and apple ID with that email address. how do I go about this

The following article may help you:
http://www.ehow.com/how_8362857_rename-mailbox-apple-mail.html

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either.

HT1918 I would like to change the data of my credit card. For the next year I live in Germany, I have a geman visa card, but I want the itunes and everything to be in english language. How can I do this?

I would like to change the data of my credit card. For the next year I live in Germany, I have a german visa card, but I want the itunes and everything to be in english language. How can I do this?

You cannot.

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s and keep my same plan but switch to the Edge program. Is this possible? I don't think I should have to pay an early termination fee or anything like that since my phone has become almost unusable. I know under normal circumstances you have to wait 2 yrs to upgrade but due to the update and the poor service I'm now getting I hope Verizon can make an exception. Thank you.

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

HT4759 My iCloud email address and my apple ID are different. I would like to change my iCloud to be the same as my apple ID. However I don't know my iCloud password and don't use the email address it belongs to. When I try to change the password, apple b

My iCloud email address and my apple ID are different. I would like to change my iCloud to be the same as my apple ID. However I don't know my iCloud password and don't use the email address it belongs to. When I try to change the password, apple brings me to a page to reset my apple ID password (which I know and don't want to change). I have even tried to delete my iCloud account completely to start again but am not allowed without the iCloud password (which I don't have) there doesn't seem to be a place to change the email address of iCloud. What can I do?

This is the answer that I had expected, so in this case you could only change your gmail.com address to another providers email addres e.g. outlook.com, yahoo.com, etc., but you won't be able to change the gmail.com address to a icloud.com email address. Apple just won't let you do that.
Your iCloud account with @icloud.com email address and you Apple ID with gmail.com address are already connected and as I said before, Apple just let you merge this two IDs together.

Would like to change my security questions and answers on my Apple ID account??

I would like to Change my Security questions and Answers on my Apple ID account??
I have tried and have successfully reset my PW but I have forgot my answers to questions!!
HELP Please!

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

I set up iPhoto v9.6 to copy items to library. Now I would like to change it to not copy. Do I have to start completely over? I have 106GB of photos and tags in my library. Will I lose all that work?

I set up iPhoto v9.6 to copy items to library. Now I would like to change it to not copy. Do I have to start completely over? I have 106GB of photos and tags in my library. Will I lose all that work? Originally I thought by copying items to library I would be making an exact copy of my originals and that would serve as a duplicate or backup copy. My originals are on my EHD#1 and my iPhoto library is on my EHD#2. But now I realize that I can not view my iPhoto library unless my EHD#2 is connected to my computer (duh!!) So now I would like to NOT copy times to library and I want to have the library in the Pictures folder on my laptop HD. So I guess my question is do I have to start completely over? Is there some way to salvage all the work I've done so far?

Yes you would have to start over from scratch.
But you should really think this through very carefully. Experienced users do not recommend iPhoto used in this mode, and with very good reasons. Among them
1. It's more work for exactly no gain
2. It's unreliable - especially - when the library is on one volume and the photos are on another. One change to the path between the files and the library and you'll be reconnecting every photo in the Library back to the database, one by one.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

Would like to change Websheet schema

Similar Messages

Maybe you are looking for