WOuld like to create VOIP system in my company

we are in phase of designing VOIP solution for my company, I have to complete the creation of the designing solution with my own.
So , If any one want to help I will be so welcome and very grateful.
waiting for your replies!!!!

Hello
1- You have to get a full information regarding " your existing H/W components as switches routers and etc.." .
2- You have to calculate the number of users who will use VOIP solution nowadays and for future? the no.of faxes ,etc..
3- How many sites do you have for now and for future?.
4-Which features will you need " Call routing incoming abd outgoing only , voicemail , video conference , presence , etc ...."
5- The integration between your company and SP , to select which modules will need to do outgoing calls ?. You have to check if you will need "FXO , E1 , T1 , etc..."
Based on the above
you can go for your design
1- You have to determine if you have a POE swich or you need to purchase new switches and which catalyst which will be more enough for you based on your no.of users and for other solutions as CCTV , and power calculations ?.
2- Select the series of your Phones based on your users catagorization " manager , emplyees , receptioanist , sales , secretary , etc ..."
3-Select H/W for VOIP " CME router based or CUCM application which will need servers to run as Cisco UCS servers".
Note: It will be better if you go to Cisco partner which server your region who can help you for that.
Thanks
please rate all useful information

Similar Messages

Can I add a 21"computer Monitor to an iPad as a peripheral? I would like to create a more permanent larger system when iPad s not in portable use.

Can I add a 21"computer Monitor to an iPad as a peripheral? I would like to create a more permanent larger system when iPad s not in portable use.

Apple sells adapters from either 30-pin or Lightning connectors to either HDMI or VGA. Check them out in the Apple Store at http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks or your national equivalent "iPad Cables & Docks" store page.
Be sure to read the comments on whichever adapter is appropriate to your iPad model and your monitor model. Not every user has found satisfaction using them (though many have).

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show u

Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new Premiere Elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

Create a new ID:
On the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
- Settings>iCloud and sign out and sign in with the new one
- Settings>iTunes and App Store and sign out your ID and sign in with the new one.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

I have an apple account but would like to create a new one for my mum on my computer how do I do this ?

I Have my own Apple ID on my computer and would like to create a new one for my mum on my computer so I can transfer all her contacts etc. How do I do this ?

You can create a new iTunes account on your computer's iTunes or you can do it via http://appleid.apple.com : iTunes: How to set up an Apple ID within iTunes
If you don't want to give credit card details before the account can be used in the iTunes store then follow the instructions on this page : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method

I would like to create a multipurpose graph display - how?

Hi all, I would like to create a simple VI, it has multiple sets of information and signal inputs (Signal generators or DAQmx cards), and whilst all the information is important, i don't need to see them all at the same time. instead I would like to create an oscilloscope-like display (one large graphical display), and boolean buttons that allow me to select which signals I want to display on the screen (graph).
So there two options, 1 boolean button to show only that waveform, and other boolean button to toggle on/off the waveform on the screen (means I can either show one dedicated waveform or show all the waveforms at the same time) this will allow me to compare the waveforms or just to focus on one particular waveform.
I was thinking of a case-structure to turn on/off the waveform for display on the graph, but how do i do that?
Help will be really appreciated!

Hi MKFX,
two notes:
1) How to change the visibility of plots is a more common question one may think - so do a little search on the forum...
2) LV2011 allows to set visibility of plots right from the plot legend, you don't need additional boolean buttons for that purpose...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy

I would like to create full free access folder

I would like to create a folder with full permissions to anyone.
However, I would like anything that is created or copied to that directory to also gain these permissions.
I should mention that I'm usually a pc user and I'm trying to solve a problem to my sister.
My original problem is with InDesign.
I have two users in two computer (iMac and MacBook Pro).
That creates 4 different users (or only 2 I'm not sure how it works).
When a user start working with a folder of indesign's files which are all have free permissions it's all fine.
However, when the user creates new files and add them to the folder, the new files has the user's permissions.
That means that other user may not be able to overwrite those files.
Therefore, making anything in a common folder with the same full permission can solve my problem.
If you have any other suggestion I will glad to hear them as well.
Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

I would like to create a folder so my email can be moved

I would like to create a folder so I can send my email to another location. HOw do I move it and create this folder

If you have an IMAP email account you create the folder on your computer and then sync to your iPad.

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings

I would like to create a plugin for adobe acrobat pro 9.0...

I would like to create a plugin for adobe acrobat pro 9.0 in order to compare pages, delete the same pages and mark pages from first compared document with new and mark pages from second compared document with original. I downloaded the SDK for adobe 9.0 but now I am not sure how to continue? Do I need Visual Studio or can I use another program that is a freeware? What other program do you recommend? How can I open an .api file in order to see the code? Do I need to place the SDK files in a specific place?

1. You will need Visual Studio. Getting your first plug-in to compile can be an ordeal, be sure to use a sample project and work with it exactly.
2. API files are the work of other programmers. You cannot look inside, and to try to do so is a breach of most software licenses.
3. API files are installed to the Acrobat plug-ins folder.
4. You will not find samples or code to copy/paste. You should be an experienced C/C++ programmer, you should be familiar with the basics of the PDF file format ISO 32000-1, and you should be prepared to read thousands of pages of documentation.

I would like to create a document with imbedded video, to email, and airdrop to an iPad mini. What program should I use?

I would like to create a document with imbedded video, to email, and airdrop to an iPad mini. What program should I use?

Thank you for using the Apple Support Communities
I would suggest using Apple's Pages which allows support for imbedding videos from the device's camera roll. Pages also allows for sharing via email, Air Drop, and Messages.

Would like to create a script for list all elements and structure of an indesign document

Hello everybody,
I'm a very beginner in indesign scripting.
I would like to create a script in order to list all elements and the inner structure of a n indesign document.
The aim for me is to understand how elements are sorted and arranged into indesign, and be able to find an specific element by its item name.
The output document could be an xml or txt document with a treeview structure.
I would like have a rough idea of which kind of javascript code I should use for that.
Thanks for answers.

Hi Ossydoc,
You can use Muse to create such a website. All you need to do is, create links in Muse for the sermons and select " link to File " in the hyperlink option and link to those Mp3 files.
Please refer to this screenshot :- http://prntscr.com/4xvdup
Now, when you publish your site, Muse would automatically upload those files onto the server and the users would then be able to listen as well as download those sermons using the links on your site.
Hope this helps
Regards,
Rohit Nair

I would like to create a reset button

I would like to create a reset button for a counter on my vi. I have tried many methods as seen in the forums but my latest one will reset to 0, but as soon as the button is released the number that was displayed when the button was pressed can be seen back in the counter box.
As you can tell I am a very new newbie.
Any help would be greatly appreciated!!
Solved!
Go to Solution.
Attachments:
Stu Sensor Assignment.vi ‏26 KB

I find the Select function a lot more readable in these situations. Also, the value you are writing to your indicator should also be wired to the add that is going into the shift register. Basically, you are not resetting the count stored in the shift register.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Stu Sensor Assignment.png ‏9 KB

WOuld like to create VOIP system in my company

Similar Messages

Maybe you are looking for