Would like to get an alert for Firefox 6.0 compatibility with Norton Identiy Safe add-on before install

I am aware that vs. 6.0 is incompatible with the Norton Identity Safe add-on (as it has been on the previous update when I found out only after I updated, grrrrr). Thank you for the heads up this time so I didn't automatically hit that button. Can you inform me when this problem is resolved so I quit getting those install pop-ups every hour or so? I really don't want have to use Chrome or Opera in the meantime like I did last time because this is becoming extremely annoying!

Funny, in the notes for the install it said specifically that Norton Identity Safe was NOT compatible at the time of release.

Similar Messages

I would like to get data analysis for solving statistic and making graphs, but this function is not in add-in. How should I do? I also set up microsoft office for mac 2011.

I would like to get data analysis for solving statistic and making graphs, but this function is not in add-in. How should I do? I also set up microsoft office for mac 2011.

Microsoft didn't include that with the 2011 version.
There is a third-party application that substitutes for the add-in: http://www.analystsoft.com/en/products/statplusmac/
They also have a limited, free version.

I am a nursing student and would like to get an Ipad for textbooks. IS that possible?

I am a nursing student and would like to get an Ipad for textbooks. Is that possible? I want to be able to just carry and ipad around, as opposed to 7 or 8 textbooks.

I would also be certain that you get enough memory to keep nursing books. I remember the books my sister had in nursing school and they were very heavy in pictures and graphics... which means they will take up a lot of memory space. Be sure it can hold all your books.

I would like to get the program for (9012,9233 and 9101)

Hi all,
     Now i have bought
                      the controller (9012) cRIO,
                      the module (9233)
                      the chassis (9101) .
i would like to get a supporting program for those device to be able to use them up (configuration and compile them up together to be able to use) .As I want to test some of my application using these device.Where can i get that program properbly.Thank you for your support.
With best regards ,
Kit

Hi Kit,
I understand your question now and I can point you to some usefull resources. First, you mentioned the three components, the chassis (which contains the FPGA), the ReamTime controller and the module. You also of course have your PC which is what the user will interface with to perhaps view the data on a graph. You will need to create a new FPGA project and you will have several key components in that project:
1) a VI on your FPGA target that is programmed to do I/O from your 9233 module. This VI must be created and then deployed and compiled onto the FPGA (this is like programming the chassis)
2) a VI on your RT controller that will use a DMA fifo to get the data from the FPGA. You may also have some signal processing or some other logic on this VI. This VI must be deployed to the RT controller
3) a VI on your host computer that will read data from the controller, probably save it to a disk and display it on a graph.
I would reccamend looking at a few resources to help you get started:
1) FPGA Design, Development and Programming Tutorial
2) Getting Started with the FPGA Module from the LabVIEW help files
3) LabVIEW FPGA Module On-Line Tutorial, this is a video tutorial that will be helpful
4) Use the LabVIEW example finder (in LabVIEW go to help»Find Examples) and under the "search tab" type in 9233. Open the 9233 getting started project that will populate in the list of available examples for the 9233. This project will serve as a starting point for your cRIO system programming.
I hope this helps. Thanks and have a great day.
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

HT5290 Hi, I would like to get virus protection for my Mac Air

Hi,
I would like to get my Virus Protection installed for my MAC Air.

The linked article is 6 years old. That doesn't necessarily mean it's no longer relevant, but it is out-of-date in terms of current tecvhnology.
Some people are fervently oppsoed to using AV software on a Mac. Some people believe it's not a bad idea to run AV software on a Mac so long as it's not Nortons, McAfee, or other bloatware (such as MacKeeper which has its own threads, and is often mentioned in AV threads as well). If you search through Apple Discussions, you can find hours of reading on this subject.
ClamXav and Sophos, in my experience, are not going to kill your system, and allow you to consider the possibility that there could be an OS X malware issue at some point in the near or distant future. You're not crazy or killing your system if you run one of these two apps. You're also not crazy if you use no AV software on OS X.
But seriously, there are hundreds, maybe thousands of posts about this on Apple Discussions. Take a look for yourself, and whatever you decide, you;re not crazy.

I have a Powerbook G4 running on OSx version 10.4.11. I would like to get an iphone, but non-seem to sync with my computer. Is there any options for me?

I have a Powerbook G4 running on OSX Version 10.4.11. I currently have an Iphone 3, but it cannot sync with my computer because it reverts back to a version so old that I can't even text photos. (I have itunes 9) I would like to get a new phone because mine constantly freezes up, but I figure what's the point of getting an iphone if it won't sync with my laptop. I can't even listen to music on my iphone! Is it possible to get an Iphone 4s to sync with a G4 Powerbook?

Hello,
Sadly not as an iPhone 4 running iOS 6 or above needs Mac OS X 10.6.8 or higher to sync in iTunes.
Mac OS X 10.6 is not compatible with an PowerBook

Firefox 11 is screwing with Norton ID Safe on Paypal

With FF11 when I go to Paypal my Norton Internet Security's Identity Safe fills in my username (which is an email address) as it should. When I go to "Send Money" I have to fill in the email for the person the money is going to. I do this. Then I select "|Continue", which should get me a page asking me to verify the transaction. Instead, NIS ID Safe replaces the email for the person I want to send money to with MY email, and I get a Paypal notice saying I cannot send money to myself. When I go to Paypal using Internet Explorer, the ID Safe fills in the initial Paypal login info (my email and password), I log in and go to "Send Money", I fill in the payee's email, and when I select "Continue" that email IS NOT changed by the ID Safe and I DO get the "confirm transaction page". This problem with the ID safe changing the payee's email to my email is obviously endemic to Firefox, and is not a problem with either Norton's or Paypal's code.
As it was the ONLY thing I could do, I tried deleting cookies. As I suspected, that had absolutely no effect on the problem. I ALSO noticed that the "clear cache" option in Tools - Options has disappeared from FF11. Smart move, people.

Nope, the problem isn't in Firefox's password stuff, it's in Norton's Identity Safe, that's what's removing the payee's email and replacing it with my email when I try to submit a payment thru Paypal. I tried Norton support, and it turns out it was a waste of time. Although I was originally sure it culdn't be the browser, they insisted it wasn't Norton, and had me try IE instead of Firefox, and it worked OK, and uninstalling FFX 11, then cleaning out the registry to make sure noithing was left there, and installing FFX 9, everything worked OK then, too. So I gave in and agreed with them that it must be Firefox, specifically FFX 11. But then today I found FFX 9 had the same problem, and sao did IE. It sems that the first time a browser is used after install, there's no problem. But after that the Norton Identity Safe replaces email addresses with my own email address at Paypal as well as some other sites that have my email as my username. So the problem IS Norton's ID Safe, which was recently updated". The "improvements" have rendered it useless, at sites that need you to fill in an email someplace after you've already logged in, the ID Safe will overwrite the address you typed in with your oen email when you try to submit the page. I should have known better than to believe one of the idiots at a 3rd party "tech assistance" outfit in India. I did some more research today and discovered that others are having the same problem with the ID Safe, some of them using Norton Internet Security and some using Norton 360, both of which have the ID Safe.he only way to0 fix things is to go back to the ID Safe version 5, which I can only do by going back to Norton Internet security 2011. Which I also can't do. To go "backwards with NIS, you have to uninstall the one you have and reinstall the older one. Luckily, I do have the setup files for NIS 2011 (which can't be gotten from Norton now), but..... If you want to keep all your usernames and passwords, you have to save them into a separate file, then reload them when you've installed the version of NI you want to use. And Norton has made THAT impossible. NIS 2012 saves the info in a .dat file, and NISs 2011 uses a .npm file. And, of course, NIS 2011 cannot read or even recognize a .dat file. So even saving the file FROM NIS 2012 onto the desktop before uninstalling it, and then placing that file manually in the right folder after installing NIS 2011 doesn't work. WHY do we pay people like this so much money just to let them screw things up and then provide "tech assistance" by people who don't even understand what you tell them half of the time, even if they DID pass some English language exam? Hell, I once passed a linguist exam that got me an official linguist classification in the Army, and my German language ability was about what a typical 9 or 10 year old German kid would have. Less than that, actually, where proper grammar was concerned. It's not as hard to pass a language exam as it is to actually do anything useful using that language. Oh, yeah, when I called Norton back today (actually yesterday, now) and demanded to talk to the next level of support the guy
"transferred" my call to that section. I'll admit they have better "hold" music than just about any I've ever run into, but after being on hold for OVER 2 and a half hours I finally hung up. And I'm paying these A..holes $89.99 a year for their wonderful service. My recommendation: If you have ANY other reasonable option, DO NOT use Norton software, if you already have it look for a replacement and buy that instead when it's time to renew the Norton subscription.

I would like to get the password for Marley 11 guest

Please can I get the password for Marley 11 guest

Hi Kit,
I understand your question now and I can point you to some usefull resources. First, you mentioned the three components, the chassis (which contains the FPGA), the ReamTime controller and the module. You also of course have your PC which is what the user will interface with to perhaps view the data on a graph. You will need to create a new FPGA project and you will have several key components in that project:
1) a VI on your FPGA target that is programmed to do I/O from your 9233 module. This VI must be created and then deployed and compiled onto the FPGA (this is like programming the chassis)
2) a VI on your RT controller that will use a DMA fifo to get the data from the FPGA. You may also have some signal processing or some other logic on this VI. This VI must be deployed to the RT controller
3) a VI on your host computer that will read data from the controller, probably save it to a disk and display it on a graph.
I would reccamend looking at a few resources to help you get started:
1) FPGA Design, Development and Programming Tutorial
2) Getting Started with the FPGA Module from the LabVIEW help files
3) LabVIEW FPGA Module On-Line Tutorial, this is a video tutorial that will be helpful
4) Use the LabVIEW example finder (in LabVIEW go to help»Find Examples) and under the "search tab" type in 9233. Open the 9233 getting started project that will populate in the list of available examples for the 9233. This project will serve as a starting point for your cRIO system programming.
I hope this helps. Thanks and have a great day.
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

What Firefox versions are compatible with Norton Identy Safe

Norton "Identity Safe" functions with Firefox version 3.6.20 with Windows. Last report was Identity Safe will not function with newer versions of Firefox.

Norton has actually tried to get a update patch out for Firefox 5.0 back on Tuesday (versus taking some six weeks) when Firefox 5.0 was released. However I think some say the toolbar may not work if patch was installed before Firefox 5.0 and not after.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Update-Available-Firefox-5-0-Compatibility-Release-for-Norton/td-p/478160

I would like to get back to the firefox tutorial. I accidentally closed it.

I just downloaded Firefox and was successful. I was going through the tutorial for beginners when I accidentally closed out the tutorial. It took me back to Safari. I have Apple Lion ... MacBook Air.

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Does Firefox 12.0 work with Norton Identity Safe?

I recently updated to Firefox 12.0 and wanted to take advantage of Norton offering for free their Identity Safe app. I am running Mac OSX 10.7.3 and when it took me to the mac app store, it uploaded the extension in my Firefox ribbon on the top, but when I click on it, it opens in Safari. Is it not compatible yet with Firefox?

After you run "Live Updates" from the PC Security Section contained in the Norton Security Suite, do the following:
'''1.''' Click on "'''Tools'''" ---
'''2.''' Click on "'''Add-ons'''" ---
'''3.''' Click on "'''Extensions'''" ---
'''4.''' Click on "'''''Enable'''''" to the right of the "'''''Norton Tool Bar 2011.7.7.5'''''" ---
'''5.''' Click on "'''''Enable'''''" to the right of the "'''''Symantec Intrusion Prevention 10.1.1.8-4'''''" ---- Then restart your system if needed.

Is latest (10.1) Firefox compatable with Norton 360 safe web/identity safe toolbar

It is REALLY annoying when the first notice of the availability of this latest version says Norton 360 toolbar (Safe Web and Identity Safe) are not yet supported by Norton, and then the later notices of the availability of this update is TOTALLY silent on this issue.
The last time I upgraded, after Norton was "supposedly" supported on the Toolbar, I wound up having to run Norton LiveUpdate 13 times before the toolbar installed.
Anyone know about Norton and this latest release.
I am QUITE sure that more than a few Firefox users use Norton 360, and Moxilla needs to do a better job of at least INFORMING US if an offered upgrade is or is not compatible.
Thanks!!!!!!

Above link did not work for me to fix missing toolbar. Contacted Norton Support via Chat and they logged into my system and tried to fix the issue over a 4 hour period!!! Even a higher level tech was unable to fix it and he, as I was watching him, seemed to really know what he was doing but it never showed in FF 10.0.2 on my Windows 7 64-bit PC. My 32-bit PC running FF 10.0.2 works fine in showing the toolbar. Norton tech support feels it has something to do with the 64-bit version causing the toolbar not to show. Are there any 64-bit Windows 7 Pro PC owners that are still having this issue? AND are there any 64-bit Windows 7 Pro PC owners running FF 10.0.2 that HAVE the toolbar?

I would like to get rid of firefox 4 and go back to the older one, how do I do this

I would like to get rid of firefox 4 its a nuisance and go back to the old one how do I do this

It's helpful to give more specific feedback if you can.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information] (copy your whole profile folder).
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 4, and uninstall it. Do not remove your personal data and settings, just the program.
Then finally you can reinstall Firefox 3.6. Unless you have installed an incompatible add-on, it should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck.

The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck. I am disappointed by the work Apple

It sounds as if AT&T has already told you they can't do what you want. It doensn't sould like anything that's fixable on your end.

Would Like to Get Report of Daily Emails In and Out from Members to a DL Exchange version : 2007 I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity is it possible ?

Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?

Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP

Would like to get an alert for Firefox 6.0 compatibility with Norton Identiy Safe add-on before install

Similar Messages

Maybe you are looking for