Would Like To Hold Object In The Middle

There are controls for holding an object(TV Set)at the beginning and end, but not the middle. I want to hold the set in place for 5 seconds, but it's not happening. There was a somewhat similar query, but the suggestion was to add another track and cut it in. Is that the only solution? Any help is appreciated.

You're talking about the TV Sets in the Objects tab right?
Assuming yes then just increase the loops.
Once you've selected the Object and applied it to a track then go to the Timing Tab and in the Loop Box increase the 1 to a higher number depending on how long you want it to remain stationary.
Good Luck
Doug
Edit<</div>
I just tested the Big TV Down and 8 loops kept it stationary for 5 seconds and 9 frames,

Similar Messages

  • Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

    Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

    The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
    (photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
    Did you ever have cs2 installed on this particular computer before?
    If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
    You'll need to use the non activation version of cs2 from here and the supplied serial number:
    Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

  • I have an ipad1 and would like to update it to the latest iOS version. Can it be done?

    I have an ipad1 and would like to update it to the latest iOS version. Can it be done?

    Rodelo wrote:
    Netflix is getting a little funky.. Not working properly...
    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.

  • I have a debit card but would like to download apps from the store. how do I do that? I can't possibly get a credit card just for this. please help.

    Hi,
    I have an iTouch. I'd like to download some free apps. but I have a debit card but would like to download apps from the store. how do I do that? I can't possibly get a credit card just for this. please help.

    I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
    Try signing out of your account and restart your iPad.
    Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

  • I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

    I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
    I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
    When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
    I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
    Any advice is appreciated.
    Thanks in advance.

    Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
    Check to make sure your applications are compatible.
    Application Compatibility
    Applications Compatibility (2)

  • I want to be able to totally block the FaceTime functionality in my home network.  I would like to do this at the router level.  Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime?   Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open.  Good luck!

  • I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • I bought an iphone 5, i am giving my itouch to my daughter.  I set up an itunes account for her, and would like to let her keep the music and apps on the itouch plus give her her own account to add to the itouch.  how do I do this.

    i bought an iphone 5, i am giving my itouch to my daughter.  I set up an itunes account for her, and would like to let her keep the music and apps on the itouch plus give her her own account to add to the itouch.  how do I do this.

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • My kids set up itune account on my computer and no one remembers the password.  I want to start my own itunes account, but I would like to get some of the music off this account.  Any suggestions?

    my kids set up itune account on my computer years ago and no one remembers the password.  They started new accounts on their macs.   I want to start my own itunes account, but I would like to get some of the music off this account.  Any suggestions?

    The easiest way would probably be to recover the data of the old account and change it to match your current info, after that you can continue to use the account without any problems. To recover your account go to: Apple - My Apple ID
    Alternatively if you want to start a new account do it and then contact iTunes support to see if the y can transfer your purchases (I know of cases on which they have done it)

  • I just bought a new IMac. I have photoshop elements installed on my old IMac and would like to move it to the new one. How can i do this?

    I just bought a new IMac. I have photoshop elements installed on my old IMac and would like to move it to the new one. How can i do this?

    Unfortunately, adobe doesn't have photoshop elements 6 available for download, as far as i know, so your best bet is to either get an usb dvd drive or use an computer with a dvd drive and copy the contents of the pse 6 dvd to somethiing like
    a flash drive and then copy the contents from that drive to your new computer.
    Do you still have your older mac and it has a dvd drive?
    You can share files between the two using airdrop or an ethernet cable.
    http://support.apple.com/en-is/HT203106
    http://support.apple.com/kb/PH18722
    http://support.apple.com/kb/PH14409

  • I am trying to find out if I can change a setting of the calendar in my iPhone.   When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change? SS

    I am trying to find out if I can change a setting of the calendar in my iPhone. 
    When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change?

    Hello SMEvans32
    You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
    iCloud: Calendar sharing overview
    http://support.apple.com/kb/PH2689
    iCloud Setup
    http://www.apple.com/icloud/setup/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • "Another program on your computer would like to modify Firefox with the following add-on" - how to disable?

    I am using the latest Firefox (28.0) on Windows XP in a shared computer environment. Although I do not have Administrator access, I installed Firefox myself and can change whatever Firefox config settings I want (including about:config and mucking with the files in the installation directory).
    I want to disable the tab that appears on Firefox startup, "Another program on your computer would like to modify Firefox with the following add-on". This tab usually appears once per day (the first time I startup Firefox each day). I want the tab not to appear at all, from now on.
    The "another program" in question is some program that is used in the facility where I'm using the computer, so I can't just uninstall that program. Although this is a shared computer environment, they don't "wipe" the machine every day, just reboot. So the Firefox I installed is still there with all my config settings intact. As far as I know, I'm the only person who uses Firefox on this computer.
    Solutions that don't work:
    "Just click Continue" -- but then I still see the "Another program" tab every day, and don't want to see it.
    "Click Remove in the Add-ons list" -- I removed the Add-on in question but the tab still appears every day.
    I would like a solution that either eliminates the Add-on request for that particular application, or eliminates all such requests ("Another program...") regardless of what application requested it. The ideal solution would be if the request itself had a checkbox for "never ask this again" but, alas, no such luck.

    Gosh... I spent about an hour preparing a response, then accidentally did control-something or alt-something which took me back a page and I lost everything I typed (even after I clicked Forward to try to get back to where I was). If anyone knows of a config setting like "don't ever trash an entire page of user input unless the user explicitly confirms it", or, "keep form input data even if the user goes Back or Forward", I think that would be a great feature.
    OK, back to the original question...
    I appreciate the responses thus far, but I think there have been some misunderstandings. Maybe a multiple-choice version would help:
    Question: Is there a way to suppress the appearance of the notification tab that says, "Another program on your computer would like to modify Firefox with the following add-on" (meaning, any request from another program to install an add-on is to be silently ignored and discarded)?
    Answer:
    (A) Yes, you can suppress that notification (please state how).
    (B) No, but you can request that feature (please state where).
    (C) No, you can't do that or request that feature.
    That's basically my question in a nutshell. If the answer is (B), I might envision a boolean about:config setting like "extensions.allowProgrammaticAddonRequests" that defaults to "true" and can be set to "false" manually. I think that would be the most direct solution (if it were possible).
    I will respond to some comments from above:
    "I don't understand why you are using a mozilla.cfg file to lock those preferences when you can modify the preferences for your current Firefox profile via about:config" -- This is because the "other program" in question (iCafe Manager) was setting certain config options (browser.startup.homepage, and browser.newtab.url) on every reboot (which happens every morning at that facility). I got tired of manually changing the settings back every day. Using the above-mentioned files, I successfully defeated iCafe Manager's daily interference with those config settings. The other things (like stuff related to Socks tunnelling) I probably could have just set once in about:config but doing a lockPref seemed to do no harm. The settings for "enabledScopes" and "xpinstall" were to see if they'd help with the problem I originally asked about, but they did not.
    "I would look in about:config to make sure those preference modifications are in effect" -- yes, I confirmed that the settings are in effect and locked. That much works as expected.
    "A) removing the iCafe Toolbar extension from the Firefox Addons -> Extensions panel results in the "Another program" tab at startup" -- true, but I think it would be more accurate to say: while the toolbar extension is not installed (due to either having been removed, or, never having been installed at all), the "Another program" tab appears on at least the first startup of Firefox after every reboot.
    "B) when you allow the installation it shows up as "(disabled)" in the Extensions list but the unwanted toolbar still shows up (correct?)" -- yes, correct.
    "You could explain the problem to the system administrator of your facility" -- unfortunately, there's no administrator on site, only a person who makes sure the lights are on. They'll call a tech if there's a catastrophic problem (like the net connection goes dead). Since I installed Firefox myself, and since iCafe Manager is a program they installed, I don't think they'll go out of their way to help me with Firefox (especially if I'm trying to defeat iCafe Manager's attempts to interfere with Firefox). From their point of view, their systems are working just fine.
    "allow the installation and then see if you can go to the Firefox Customize menu and HIDE the toolbar as a workaround" -- since I'm not in that facility now (and probably won't be again until this summer or so), I can't experiment with those systems now. But I do recall clicking just about everything I could, including "View - Toolbars" (which seems to be the same menu as when I right-click on a toolbar line). That menu allows hiding toolbars, but from my recollection, the offending toolbar was not displayed in the list, so I could not hide it that way. Also, the Customize menu ("View - Toolbars - Customize") seems to allow only modifications to a toolbar, and not a way to hide an entire toolbar.
    "it might help if you could post a new troubleshooting information list after you allow the iCafe Toolbar installation" -- ok, that troubleshooting report is included below.
    Thanks again for your help.
    Application Basics
    Name: Firefox
    Version: 28.0
    User Agent: Mozilla/5.0 (Windows NT 5.1; rv:28.0) Gecko/20100101 Firefox/28.0
    Crash Reports for the Last 3 Days
    All Crash Reports
    Extensions
    Name: iCafe Manager Toolbar
    Version: 5.2.0.6
    Enabled: false
    ID: {C058FE28-1E07-4FD1-8092-046F8A964D12}
    Important Modified Preferences
    accessibility.typeaheadfind.flashBar: 0
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    browser.cache.disk.smart_size_cached_value: 358400
    browser.newtab.url: about:blank
    browser.places.smartBookmarksVersion: 6
    browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
    browser.startup.homepage: http://www.google.com/ncr
    browser.startup.homepage_override.buildID: 20140314220517
    browser.startup.homepage_override.mstone: 28.0
    dom.mozApps.used: true
    extensions.lastAppVersion: 28.0
    gfx.blacklist.direct2d: 3
    gfx.blacklist.layers.direct3d10: 3
    gfx.blacklist.layers.direct3d10-1: 3
    gfx.blacklist.layers.direct3d9: 3
    gfx.blacklist.layers.opengl: 3
    gfx.blacklist.stagefright: 3
    gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
    gfx.blacklist.webgl.angle: 3
    gfx.blacklist.webgl.msaa: 3
    gfx.blacklist.webgl.opengl: 3
    network.cookie.prefsMigrated: true
    network.websocket.enabled: false
    places.database.lastMaintenance: 1398414928
    places.history.enabled: false
    places.history.expiration.transient_current_max_pages: 53428
    plugin.disable_full_page_plugin_for_types: application/pdf
    plugin.importedState: true
    plugin.state.npgoogleupdate: 1
    privacy.sanitize.migrateFx3Prefs: true
    privacy.sanitize.sanitizeOnShutdown: true
    storage.vacuum.last.index: 1
    storage.vacuum.last.places.sqlite: 1396778909
    Graphics
    Adapter Description: Intel(R) G33/G31 Express Chipset Family
    Adapter Drivers: igxprd32
    Adapter RAM: Unknown
    Device ID: 0x29c2
    Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    DirectWrite Enabled: false (0.0.0.0)
    Driver Date: 11-3-2008
    Driver Version: 6.14.10.5009
    GPU #2 Active: false
    GPU Accelerated Windows: 0/1 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
    Vendor ID: 0x8086
    windowLayerManagerRemote: false
    AzureCanvasBackend: skia
    AzureContentBackend: cairo
    AzureFallbackCanvasBackend: cairo
    AzureSkiaAccelerated: 0
    JavaScript
    Incremental GC: true
    Accessibility
    Activated: false
    Prevent Accessibility: 0
    Library Versions
    NSPR
    Expected minimum version: 4.10.3
    Version in use: 4.10.3
    NSS
    Expected minimum version: 3.15.5 Basic ECC
    Version in use: 3.15.5 Basic ECC
    NSSSMIME
    Expected minimum version: 3.15.5 Basic ECC
    Version in use: 3.15.5 Basic ECC
    NSSSSL
    Expected minimum version: 3.15.5 Basic ECC
    Version in use: 3.15.5 Basic ECC
    NSSUTIL
    Expected minimum version: 3.15.5
    Version in use: 3.15.5

  • I would like to see and access the correct sound patches from my E-mu mps orchestral plus from inside of logic express.

    I would like to see and access the correct sound patches from my E-mu mps orchestral plus from inside of logic express.
    Right now , I have access to some of the sound files but most are missing and all are incorrectly labeled.
    Is it possible to ("Library") these sound files or access them from logic?
    Thanks
    J

    HI,
    I'm not quite sure who you think you are addressing here with your idea but this is a user to user forum. Apple don't come here.
    If you want to offer ideas or feedback to Apple, it would be best for you to do it here:
    http://www.apple.com/feedback/logic-pro.html

  • "Another program on your computer would like to modify Firefox with the following add-on" - how do I allow extensions?

    I cannot get extensions to run or enable, nor does the browser remember my preference.
    For example, after I install or Enable an extension, when I restart Firefox I get a tab for every extension that forces me to check "Allow this installation" after the prompt "Another program on your computer would like to modify Firefox with the following add-on".
    Moreover, when I click 'Options' on an installed extension, Firefox freezes permanently.
    Note that I DO NOT have any extensions.* files in my Profile folder, nor do they appear.
    I am trying to get MozRepl running. I am able to install it, but the menu option does not get added in the 'Tools' menu. Moreover none of the installed extensions are able to add to the menu.
    I've tried every solution in the following links
    https://support.mozilla.org/en-US/questions/929335
    http://kb.mozillazine.org/Preferences_not_saved
    https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save
    I have made the Profiles\ folder and all subfolders Read-only, including the files.
    I have tried the "Reset Firefox to its default state".
    I have tried uninstalling (including removing all profiles/data) and re-installing Firefox, and I get the same issues.
    My operating system is Windows 7 and I have McAfee SiteAdvisor Enterprise Plus and McAfee VirusScan Enterprise + AntiSpyware Enterprise.

    Check that Firefox isn't set to run as Administrator.
    Right-click the Firefox desktop shortcut and choose "Properties".
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
    * Privilege Level: "Run this program as Administrator" should not be selected
    * "Run this program in compatibility mode for:" should not be selected
    Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

  • I would like some help in determining the proper structure/implementation

    I would like some help in determining the proper structure/implementation for the following scenario:
    I have ~10 steel rods that have been equipped with a strain gauge.  The most I would have is ~30 steel rods.
    Each setup has had a 10 point calibration done.
    These steel rod/strain gauge setups are assigned a calibration number.
    The data would be grouped for each steel rod and identified by the calibration number. 
    I would like to use that calibration data to determine the Young’s Modulus for each steel rod and store that within the specific rod’s information.
    I want the user to be able to add new steel rods dynamically and the Young’s Modulus calculated and stored with it.
    There are two different types of rods.
    The cross-sectional area of the rod needs to be stored and that value is constant based on the rod type (so there are two different area values).
    After a rod’s calibration data is entered the first time, the data should be static so it doesn’t need to be re-entered.
    The user would enter the cal#, the 10 point calibration data, and the rod type.
    The user will only see the steel rod cal# on the FP.
    I am using a queue-based producer/consumer with event structure for the front panel interface.  So I’m thinking whenever a rod cal# was added I would call a subvi where the calibration data can be entered and then the Young’s Modulus could be calculated and stored.  An option to edit/review existing cal data should be available.
    LabVIEW 2010, Win 7.
    My initial idea was:
    Rod Arr – array of clusters:
    Rod Info - cluster:
    Calibration number – string
    Rod Scale cluster:
    mV/V – double array
    force – double array
    Young’s Modulus – double
    Rod type – enum
    Cross-sectional area – double
    I have not implemented this because I’m not sure how to implement that AND keep the data after it’s been entered.  And all of the bundling/unbundling anytime I want to access/edit any rod information can be BD consuming.  I thought a lookup table might work.  When I looked on the forums for a lookup table I was pointed in the direction of arrays/clusters.
    So I have two questions:
    What would be the best structure for the steel rod data?
    What would be the best data type for the calibration# that the user can edit (enum, ring, ?)?

    I would make a couple of small change to your proposed data layout (highlighted in blue):
    Rod Arr – array of clusters:
    Rod Info - cluster:
    Calibration number – string
    Array of Rod Scale cluster:
    mV/V – double
    force – double
    Young’s Modulus – double
    Rod type – enum
    Cross-sectional area – double
    For the calibration data, I would have an array of clusters rather than a cluster of arrays.  IMHO, this makes it easier to index through the calibration points, and makes it less likely you will ever have a situation where you don't have the same number of mV/V and force points.  I'd also move the Young's modulus, type, and area info into the Rod Info cluster.
    I prefer to store this type of configuration in the system registry, but that is more complicated and far from universal in the LabVIEW world.  A simpler way would be to simply pass the entire array to the "write to binary file" function.  If you do this, however, you might want to add a version number, otherwise it will be very difficult to maintain backwards compatibility if you ever need to change the data structure.
    As far as the control type, it depends on what the user is entering.  If the user is mostly entering calibration numbers already in the system, I would use a (system) combo box.  This allows the user to select an existing calibration number from the menu, but also to enter a new calibration number if they need to.  If the user will almost always enter new calibration numbers, then I would use a standard string control.  Either way, you'll probably want to validate the format of the number the user enters.
    Mark Moss
    Electrical Validation Engineer
    GHSP

Maybe you are looking for