Would like to monitor teaming with snmp
Hello,
I would like to use snmp to monitor the state of teaming/vibe. I can't seem to find much information on the subject in general and none specifically to do with teaming/vibe. Does teaming/vibe have an OID? If not, is there some way I can give it one? It is a java process and I can monitor a process such as java with snmp but I can't differentiate between different java processes such as indexServer and icecore. Any information or links would be appreciated.
Thanks!
Toney.
toneyc,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Similar Messages
-
Would like to monitor and control a labview application with a hand held device.
Would like to monitor and control a labview application with a hand held device.
Would like to use a palm or ipac on a local area network or communicate directly with the PC running windows.LabVIEW doesn't run on a hand held device. But, check out these documents:
Is it Possible to Use Remote Front Panels to Control a LabVIEW VI Remotely Using my PDA?
"What OS is recommended for LabVIEW to run on a PDA?" -
How can I convert my music, and CDs to MP3, for use in my vehicle's AM/FM/ Stereo? I have a 16 GB SDHC Card, that I would like to load up with some of my music.
Thanks for any help you can furnish.
EdWell, this question really belongs in the iTunes forum, which is where you will get fast answers.
Just go to iTunes Preferences. Click on the General icon. Set When you insert a CD to Ask to Import CD. Click on Import Settings. Set Import to MP3 decoder. Make sure you're using Good Quality.
This should deal with your CD's.
With your current music, as long as it does not have DRM restrictions (older iTunes Music did), select the song, right click on the song (or group of songs), pull down to Create MP3 version. -
I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am using the latest Firefox (28.0) on Windows XP in a shared computer environment. Although I do not have Administrator access, I installed Firefox myself and can change whatever Firefox config settings I want (including about:config and mucking with the files in the installation directory).
I want to disable the tab that appears on Firefox startup, "Another program on your computer would like to modify Firefox with the following add-on". This tab usually appears once per day (the first time I startup Firefox each day). I want the tab not to appear at all, from now on.
The "another program" in question is some program that is used in the facility where I'm using the computer, so I can't just uninstall that program. Although this is a shared computer environment, they don't "wipe" the machine every day, just reboot. So the Firefox I installed is still there with all my config settings intact. As far as I know, I'm the only person who uses Firefox on this computer.
Solutions that don't work:
"Just click Continue" -- but then I still see the "Another program" tab every day, and don't want to see it.
"Click Remove in the Add-ons list" -- I removed the Add-on in question but the tab still appears every day.
I would like a solution that either eliminates the Add-on request for that particular application, or eliminates all such requests ("Another program...") regardless of what application requested it. The ideal solution would be if the request itself had a checkbox for "never ask this again" but, alas, no such luck.Gosh... I spent about an hour preparing a response, then accidentally did control-something or alt-something which took me back a page and I lost everything I typed (even after I clicked Forward to try to get back to where I was). If anyone knows of a config setting like "don't ever trash an entire page of user input unless the user explicitly confirms it", or, "keep form input data even if the user goes Back or Forward", I think that would be a great feature.
OK, back to the original question...
I appreciate the responses thus far, but I think there have been some misunderstandings. Maybe a multiple-choice version would help:
Question: Is there a way to suppress the appearance of the notification tab that says, "Another program on your computer would like to modify Firefox with the following add-on" (meaning, any request from another program to install an add-on is to be silently ignored and discarded)?
Answer:
(A) Yes, you can suppress that notification (please state how).
(B) No, but you can request that feature (please state where).
(C) No, you can't do that or request that feature.
That's basically my question in a nutshell. If the answer is (B), I might envision a boolean about:config setting like "extensions.allowProgrammaticAddonRequests" that defaults to "true" and can be set to "false" manually. I think that would be the most direct solution (if it were possible).
I will respond to some comments from above:
"I don't understand why you are using a mozilla.cfg file to lock those preferences when you can modify the preferences for your current Firefox profile via about:config" -- This is because the "other program" in question (iCafe Manager) was setting certain config options (browser.startup.homepage, and browser.newtab.url) on every reboot (which happens every morning at that facility). I got tired of manually changing the settings back every day. Using the above-mentioned files, I successfully defeated iCafe Manager's daily interference with those config settings. The other things (like stuff related to Socks tunnelling) I probably could have just set once in about:config but doing a lockPref seemed to do no harm. The settings for "enabledScopes" and "xpinstall" were to see if they'd help with the problem I originally asked about, but they did not.
"I would look in about:config to make sure those preference modifications are in effect" -- yes, I confirmed that the settings are in effect and locked. That much works as expected.
"A) removing the iCafe Toolbar extension from the Firefox Addons -> Extensions panel results in the "Another program" tab at startup" -- true, but I think it would be more accurate to say: while the toolbar extension is not installed (due to either having been removed, or, never having been installed at all), the "Another program" tab appears on at least the first startup of Firefox after every reboot.
"B) when you allow the installation it shows up as "(disabled)" in the Extensions list but the unwanted toolbar still shows up (correct?)" -- yes, correct.
"You could explain the problem to the system administrator of your facility" -- unfortunately, there's no administrator on site, only a person who makes sure the lights are on. They'll call a tech if there's a catastrophic problem (like the net connection goes dead). Since I installed Firefox myself, and since iCafe Manager is a program they installed, I don't think they'll go out of their way to help me with Firefox (especially if I'm trying to defeat iCafe Manager's attempts to interfere with Firefox). From their point of view, their systems are working just fine.
"allow the installation and then see if you can go to the Firefox Customize menu and HIDE the toolbar as a workaround" -- since I'm not in that facility now (and probably won't be again until this summer or so), I can't experiment with those systems now. But I do recall clicking just about everything I could, including "View - Toolbars" (which seems to be the same menu as when I right-click on a toolbar line). That menu allows hiding toolbars, but from my recollection, the offending toolbar was not displayed in the list, so I could not hide it that way. Also, the Customize menu ("View - Toolbars - Customize") seems to allow only modifications to a toolbar, and not a way to hide an entire toolbar.
"it might help if you could post a new troubleshooting information list after you allow the iCafe Toolbar installation" -- ok, that troubleshooting report is included below.
Thanks again for your help.
Application Basics
Name: Firefox
Version: 28.0
User Agent: Mozilla/5.0 (Windows NT 5.1; rv:28.0) Gecko/20100101 Firefox/28.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: iCafe Manager Toolbar
Version: 5.2.0.6
Enabled: false
ID: {C058FE28-1E07-4FD1-8092-046F8A964D12}
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
browser.newtab.url: about:blank
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
browser.startup.homepage: http://www.google.com/ncr
browser.startup.homepage_override.buildID: 20140314220517
browser.startup.homepage_override.mstone: 28.0
dom.mozApps.used: true
extensions.lastAppVersion: 28.0
gfx.blacklist.direct2d: 3
gfx.blacklist.layers.direct3d10: 3
gfx.blacklist.layers.direct3d10-1: 3
gfx.blacklist.layers.direct3d9: 3
gfx.blacklist.layers.opengl: 3
gfx.blacklist.stagefright: 3
gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
gfx.blacklist.webgl.angle: 3
gfx.blacklist.webgl.msaa: 3
gfx.blacklist.webgl.opengl: 3
network.cookie.prefsMigrated: true
network.websocket.enabled: false
places.database.lastMaintenance: 1398414928
places.history.enabled: false
places.history.expiration.transient_current_max_pages: 53428
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin.state.npgoogleupdate: 1
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1396778909
Graphics
Adapter Description: Intel(R) G33/G31 Express Chipset Family
Adapter Drivers: igxprd32
Adapter RAM: Unknown
Device ID: 0x29c2
Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
DirectWrite Enabled: false (0.0.0.0)
Driver Date: 11-3-2008
Driver Version: 6.14.10.5009
GPU #2 Active: false
GPU Accelerated Windows: 0/1 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
Vendor ID: 0x8086
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.3
Version in use: 4.10.3
NSS
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSMIME
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSSL
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSUTIL
Expected minimum version: 3.15.5
Version in use: 3.15.5 -
I cannot get extensions to run or enable, nor does the browser remember my preference.
For example, after I install or Enable an extension, when I restart Firefox I get a tab for every extension that forces me to check "Allow this installation" after the prompt "Another program on your computer would like to modify Firefox with the following add-on".
Moreover, when I click 'Options' on an installed extension, Firefox freezes permanently.
Note that I DO NOT have any extensions.* files in my Profile folder, nor do they appear.
I am trying to get MozRepl running. I am able to install it, but the menu option does not get added in the 'Tools' menu. Moreover none of the installed extensions are able to add to the menu.
I've tried every solution in the following links
https://support.mozilla.org/en-US/questions/929335
http://kb.mozillazine.org/Preferences_not_saved
https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save
I have made the Profiles\ folder and all subfolders Read-only, including the files.
I have tried the "Reset Firefox to its default state".
I have tried uninstalling (including removing all profiles/data) and re-installing Firefox, and I get the same issues.
My operating system is Windows 7 and I have McAfee SiteAdvisor Enterprise Plus and McAfee VirusScan Enterprise + AntiSpyware Enterprise.Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\). -
can i run my apple TV from an iPad2 with a PC as the iTunes server ... would like to do away with Apple TV remote ... thank you
JJAs I was saying earlier that is not possible because the Apple TV has no accessible storage and streaming from your iMac is done via home sharing on your local network.
iTunes purchases can be accessed via the cloud on Apple TV. If you have iTunes Match you can access your full music libary from the cloud.
Using the iPad to watch your films would require syncing them and then connecting the iPad to a TV. -
I have just deployed an image to over 500 workstations, and they are all deep frozen using deepfreeze.
When users are logging in, and open Firefox they are getting the message "another program on your computer would like to modify firefox with the following add-on:" Adobe Acrobat - Create PDF 1.2
Yes I know u can do a one-time click and allow, but we have potentially 50,000+ students logging into these PCs and it is unacceptable that they are greeted with this message rather than the Homepage.
This is very dissapointing, as we upgraded to the latest version of firefox in preperation for rollout, and then added some software like adobe.
The profile is kept in the default user, so everytime a user logs in, they will get prompted with the message, and this will always happen because we use deepfreeze.
I need a FIX ASAP from mozilla on how to disable this pop-up via Group Policy...
Not at all happy,
SharpyHi,
One way you could try is to install Firefox on a fresh PC/image which has the same Adobe software versions installed as the clients. You may also have to install the same extensions as well as software for any additional plugins as on the clients. Start Firefox and make sure everything is okay. After that you can copy and overwrite the '''extensions.ini''', '''extensions.sqlite''' and '''pluginreg.dat''' files and probably the '''extensions''' folder and any supporting files of the extensions from this fresh profile, onto a client profile after temporarily disabling/unfreezing Deep Freeze. If everything is okay you can then push the changes onto the other clients via a logon/startup script after temporarily disabling Deep Freeze and then re-enable Deep Freeze.
[http://kb.mozillazine.org/Profile_folder Firefox Profile Folder]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files] -
Hi, my iphone 4 is stuck telefonu because put the wrong security code.
And I can not connect to itunes to update telefonu.
I get an error and would like to help me with information
Thank you! [email protected]We need the exact error message in order to help you.
-
I bought a second apple tv and would like to control it with the remote app but cannot find a way to add a second device. Anyone have an idea how to do that?
I'm having the same issue and would like to get some help. I set up a second Apple TV in our bedroom and wanted to be able to control it using my iPhone like I do with the Apple TV in the living room. The new Apple TV is active on the network and I've made sure the same Apple ID is used for both the Apple TV as well as the Remote App on my iPhone. I'm just wondering what I might be overlooking.
-
I would like to format cells with time only. when I enter a time of day the current date is still in the cell which is not necessarily so. THere are no options for just date .
christine275 wrote:
... (this is a time worked by date and not always entered on the date worked)--
"Time" in Numbers is always "Time of Day", and is always part of a Date and Time value. "Amount of Time" is a Duration value, which may be displayed in a similar format to "Time of Day," but is a different type of value.
If you are entering the number of hours and minutes worked, format the column as Duration, set the units and the format in which you want to have the value appear.
The Date column will still contain a Date and Time value (Jan 1, 2011 00:00:00 in the cell shown in the example), but the "Time Worked" cells will contain only a Duration value.
Incidently, the Date in A2 was entered as "jan 1" (without the quotes). Numbers automatically adds the current year and the default time value, then displays the result in the closest format to what you've entered, or in the Date and Time format you have chosen.
The Duration value in B2 was entered as 3:15 (as displayed). Note that in the entry bar the duration is displayed as 3h 15m, probably to distinguish it from a similarly formatted (Date and) Time value.
Regards,
Barry -
I have a dsl internet conection with a download speed of .66 mbps. I would like to watch netflix with a wireless conection to apple tv. What is the required internet speed?
Welcome to the Apple Community.
Netflix recommend a minimum connection speed of 0.5 Mbps, however at that speed many of the other features of the Apple TV will be painfully slow. -
I purchased The Man who Built America in HD and would like to view it with a Smartboard. How could I project The Man who Built America in HD to a SmartBoard?
Your smartboard would need to include a data projector function of such sort, and then you would connect your device to that projector as you would any other data projector. We cannot be more specific without more details as to what device you are using and what brand and model of "smartboard" you're referring to.
Regards. -
Hello I would like to buy Ipad with 3g, but I don't know which company choose... I am living abroad so which one to choose? i need gsm. I am going to buy it then ship it abroad
Robertafromsp wrote:
Which iPad is The newest do you know?
I am puzzled why you could not find that info yourself on the web in a second or two:
http://en.wikipedia.org/wiki/IPad#Model_comparison -
I would like to integrate JAAS with Weblogic 8
Hi,
I would like to integrate JAAS with Weblogic 8, but I noticed that BEA%u2019s documentation on JAAS doesn't make it clear whether Weblogic uses a non-standard way of invoking JAAS. Can I suggest someone at BEA post a clear example on how to integrate JAAS with weblogic 8.1?
Any help will be greatly appreciated.
Thanks,
AnaHi Ana,
I'm not understanding what you're trying to do:
a) write a fat client that uses JAAS to login to a WLS server?
If so, you should read the weblogic JAAS documentation for fat clients.
Basically, the fat client should use the JAAS login module supplied by
WLS that does a login to the server over the wire under the covers
(vs. writing your own login module). The server will use its
configured
atn providers to complete the login.
b) Write application code that runs inside WLS (e.g. a servlet) that uses
JAAS to log into another WLS server?
Similar to (a) above
c) Customize how a WLS server logs in users - ie. write a
login module that WLS will use whenever it needs to login
a user?
If so, you should read the weblogic documentation on how
to write security providers and start from the sample security
providers on the dev2dev center.
Basically, you need to write an authentication provider. Part
of writing an authentication provider is writing a login module.
-tm
"Ana" <[email protected]> wrote in message
news:40168bcf$[email protected]..
Hi,
I would like to integrate JAAS with Weblogic 8, but I noticed thatBEA%u2019s documentation on JAAS doesn't make it clear whether Weblogic uses
a non-standard way of invoking JAAS. Can I suggest someone at BEA post a
clear example on how to integrate JAAS with weblogic 8.1?
>
Any help will be greatly appreciated.
Thanks,
Ana
Maybe you are looking for
-
Are there really additional fees to download music from the itunes match icloud to an iphone?
-
My iPhone 5 dies when not plugged in.
I got a new iPhone 5 from the Apple Store a little less than a month ago. I haven't dropped it, gotten it wet, scratched it or anything since the time I recieved it, and it always has a case. My phone died unexpectantly at 80% and when I plugged it i
-
Component display out of applet bound
hi. what can i let the component display out of the bound of applet,just like the list at choice.
-
Encryption Fails during System Check
I am doing an enterprise rollout of Bitlocker and out of the thousands that have been prompted and successfully encrypted, I have two that fail during the system check. (Power Cable and CD/DVD). Bitlocker thinks that there is a disc in the drive, whe
-
Hello, Out of country, using my MacBook Pro, i forgot to install DPP from Canon to view my images taken with EOS 5D Mark II. Because Canon is giving UPGRADES, i wonder where to find downlodable original DPP ? Trying to open RAW images using PhotoShop