Would like to reformat and reinstall XP - having trouble because of thinkvantage

When I insert my disk, it just shows up with the "install windows XP" option and nothing else. There is no recovery or anything.
I'm not sure if this is because I have the thinkvantage on here or what?
Can someone please help me figure this out.
Thanks,

If you use a windows xp installation disk (not a recovery cd-rom) then this is absolutely normal.
As far as I know it, lenovo places the recovery itself on the machine sothat you need the thinkvantage button on startup to trigger that rescue system.
If you re-install and re-partition the whole drive then this rescue partition will be gone.
It is a question what you worry about: loosing the recovery partition or getting rid of it.

Similar Messages

Hi Can anyone please tell me from where I cn download the Photoshop CS6 program I purchased a download (media less) some 2 years ago and all has been OK up to know but I am know having issues and would like to uninstall and reinstall. I have the revelant

Hi Can anyone please tell me from where I can download the Photoshop CS6 program I purchased a download (media less) some 2 years ago and all has been OK up to know but I am know having issues and would like to uninstall and reinstall. I have the relevant codes and activation keys but would need to be sure I can obtain the program again before I start. Thank you

Make sure you are dealing with the correct product for the serial number. If the serial number is for a full creative suite then you need to get the suite, not the individual application, and vice versa.
Unrelated to that, in case it helps, here is a link to another site. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

I have a new MacBook and I'm having trouble with the help section. I would like to rearrange the order of my photos with in an Event, how do I do this? I follow the directions but it will not work. Thanks for some tips.

I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing? Thanks for any tips.

Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!

Reformat and Reinstall OS X Server - Keep Data Store

OS X Yosemite 10.10.1 on a Mac Mini Late 2012, 2.5 GHz, 16 GB. Server version 4 (14S333)
Running the following services:
Caching
Calendar
Contacts
File Sharing
Mail
Profile Manager
Time Machine
DNS
Open Directory
I moved my service data and file shares to an external hard drive. When I format my startup hard drive, reinstall the operating system and server, what do I have to do to connect to the service data on my external hard drive? I imagine that I have to establish user accounts with the same credentials.
Really, what I am after is that I'm trying to get Profile Manager to work right with my iOS devices. And I have a wide variety of them (about 12 of them). None of them work. They get a profile installation failure. The research I've done seems to point to just reformat and reinstall. But in doing so, I don't want to lose the service data. Any help you can provide, please...I need reassurance that when I reinstall everything, I'll be able to have access to the data store again.
Thank you for your direction.

Hi,
Based on your succes of getting profile manager to work until now, I wouldn't recommend reconnecting any services to old data.
Export any data per service like calendar through a calendar client.app and my advice would be: Start over.
First of all, get a fixed IP adress, a FQDN available from the internet and DNS up and running and get it right. Check and recheck with the right tools in the server.app (top left corner, select your server and go to "overview") and from the terminal:
host your-ip-address
host your-domain-name
sudo changeip -checkhostname
When you have everything up and running, then continue with a validated external certificate or create a self signed certificate and start profilemanager.
Goodluck
Jeffrey

X61 reformat and reinstall win7

Hi i am new on hear and would like a little help please i have just bought a second hand X61 ThinkPad
and i intend to to do a reformat and reinstall win7 Pro the help i need is where to get the correct drivers download
any help would be appreciated .
Thank you Dave
Moderator edit: Added detail to subject.
Solved!
Go to Solution.

Dave1949 wrote:
has any member had any dealings with with this drivers on this site http://www.lenovo-driver.com/ are they ok or are they expensive or rip off .
I've never heard of them. But I have to ask, what do they offer that you can't get from Lenovo either direct from their Support site or indirectly via ThinkVantage System Update?
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

I have a 2012 MacBook Pro running OSX 10.8.5. I am noticing that when I try to drag an icon accross the screen it tends to stick for 5 to 10 seconds. Just did a reformat and reinstall of OS but no change. Any ideas?

when I try to drag icons accross the screen thet are sticking for up to 10 seconds. I have just done a recovery (reformatted and reinstalled the OSX 10.8.5 but no change. The activity monitor shows nothing out of the ordinary. I have a MacBook Pro 2012. I am having perfomance isues with ProTools and I'm wondering if the 2 are connected. I installes TechTools 7 and ran tests on everything and it says all is good. Any idea's? Thanks!
Jim

If you haven't already done so, eject the card by dragging its icon to the Eject icon in the Dock (where the Trash icon usually is.) Make sure the write-lock switch on the card is in the unlocked position. Then reinsert the card and test.
If there's no change, and the same happens with more than one card, the card reader is stuck in write-locked mode. I don't generally advise do-it-yourself hardware repair, but one ASC member managed to fix this problem. I haven't tried the fix myself and I can't offer any guidance beyond what's in that discussion. If you cause damage, don't expect your warranty to cover it. I suggest you instead make a "Genius" appointment at an Apple Store.

Brand new imac 27" keeps crashing randomly in mavericks while idling, using firefox, transferring files, etc. Reformatted and reinstalled everything from scratch after 15 plus crashes a day. Crashes now only 4 times a day. Help!

Brand new imac 27" keeps crashing. I'm running 10.9.2 with all software up to date. It will crash on file tranfers to/from/between external drives, web browsing, word processing, video editing, and even while idling. It used to crash every 15 minutes when I first got it but I reformatted and reinstalled all software. Now it it still crashing albeit less often. This is extremely frustrating because I have no idea what I can do to prevent it from happening!
Any ideas/help would be greatly appreciated.

Hmm thanks for the input. Alright. I uninstalled Avast. Was good for an hour or so. I was doing some file browsing and crashed again. Got this message.
Anonymous UUID:
E3F1F825-B183-F89A-2DD4-2B2D80C38E2A
Wed Mar 19 22:17:53 2014
panic(cpu 0 caller 0xffffff8010edbe2e): Kernel trap at 0xffffff8010e340d5, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000013b1b000, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0xffffff80114d2ab8, RCX: 0xffffff804e99d7a4, RDX: 0xffffff80114ca830
RSP: 0xffffff838ecb7d90, RBP: 0xffffff838ecb7dc0, RSI: 0xffffff80114cafb0, RDI: 0x000000000000002e
R8: 0x0000000000000000, R9: 0x00000000009895b4, R10: 0xffffff83a0570000, R11: 0x0000000000000000
R12: 0x0000000000000005, R13: 0x0000000000000001, R14: 0xffffff80529d6b20, R15: 0xffffff80114ca4e8
RFL: 0x0000000000010083, RIP: 0xffffff8010e340d5, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000008, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff838ecb7a20 : 0xffffff8010e22fa9
0xffffff838ecb7aa0 : 0xffffff8010edbe2e
0xffffff838ecb7c70 : 0xffffff8010ef3326
0xffffff838ecb7c90 : 0xffffff8010e340d5
0xffffff838ecb7dc0 : 0xffffff8010e337d5
0xffffff838ecb7e10 : 0xffffff8010e336ab
0xffffff838ecb7e40 : 0xffffff8010e4c160
0xffffff838ecb7f10 : 0xffffff8010ecf359
0xffffff838ecb7f50 : 0xffffff8010ee1ea6
0xffffff838ecb7f80 : 0xffffff8010edb3ef
0xffffff838ecb7fd0 : 0xffffff8010ef34e9
0xffffff83a0573f50 : 0xffffff8010e375ba
0xffffff83a0573f90 : 0xffffff8010e37908
0xffffff83a0573fb0 : 0xffffff8010ed6ff7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:
0x0000000010c00000
Kernel text base: 0xffffff8010e00000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 7766525033947
last loaded kext at 4622165777838: com.blackmagic-design.desktopvideo.iokit.framebufferdriver
9.9. (addr 0xffffff7f93478000, size 20480)
last unloaded kext at 4682598356442: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7f93470000, size 32768)
loaded kexts:
com.nvidia.CUDA
1.1.0
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.iokit.IOBluetoothSerialManager
4.2.3f10
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AGPM
100.14.15
com.apple.driver.ApplePlatformEnabler
2.0.9d1
com.apple.driver.X86PlatformShim
1.0.0
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.driver.AppleHDA
2.6.0f1
com.apple.driver.AppleMikeyDriver
2.6.0f1
com.apple.driver.AppleIntelHD5000Graphics
8.2.4
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleHWAccess
1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleThunderboltIP
1.1.2
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleIntelFramebufferAzul
8.2.4
com.apple.GeForce
8.2.4
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.Oxford_Semi
3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AirPort.Brcm4360
831.21.63
com.apple.driver.AppleSDXC
1.5.2
com.apple.iokit.AppleBCM5701Ethernet
3.8.1b2
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.driver.AppleUSBXHCI
670.4.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.kext.triggers
1.0
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.driver.DspFuncLib
2.6.0f1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.5fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOBluetoothFamily
4.2.3f10
com.apple.iokit.IOSurface
91
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.driver.X86PlatformPlugin
1.0.0
com.apple.driver.AppleThunderboltEDMSink
2.1.3
com.apple.driver.AppleHDAController
2.6.0f1
com.apple.iokit.IOHDAFamily
2.6.0f1
com.apple.driver.IOPlatformPluginFamily
5.7.0d10
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.AppleGraphicsDeviceControl
3.4.35
com.apple.iokit.IOAcceleratorFamily2
98.14
com.apple.iokit.IOAcceleratorFamily
98.14
com.apple.driver.AppleSMC
3.1.8
com.apple.nvidia.driver.NVDAGK100Hal
8.2.4
com.apple.nvidia.driver.NVDAResman
8.2.4
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport
2.5.1
com.apple.iokit.IOFireWireSBP2
4.2.6
com.apple.driver.AppleThunderboltDPOutAdapter
3.1.7
com.apple.driver.AppleThunderboltDPInAdapter
3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily
3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter
1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter
1.4.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.driver.AppleThunderboltNHI
2.0.1
com.apple.iokit.IOThunderboltFamily
3.2.7
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IOEthernetAVBController
1.0.3b4
com.apple.driver.mDNSOffloadUserClient
1.0.1b5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.iokit.IOUSBFamily
675.4.0
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i7, 3.5 GHz, 32 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GTX 780M, NVIDIA GeForce GTX 780M, PCIe, 4096 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
PCI Card: pci11c1,5901, IEEE 1394 Open HCI, Thunderbolt@195,0,0
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
USB Device: USB3.0 Hub
USB Device: USB3.0 Hub
USB Device: FreeAgent GoFlex
USB Device: FreeAgent GoFlex
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: USB2.0 Hub
USB Device: EPSON Artisan 730 Series
USB Device: USB2.0 Hub
USB Device: Microsoft Basic Optical Mouse v2.0
USB Device: Wired Keyboard 600
FireWire Device: eGo HDD, Iomega, Up to 800 Mb/sec
Thunderbolt Bus: iMac, Apple Inc., 23.10
Thunderbolt Device: Thunderbolt to FireWire Adapter, Apple Inc., 1, 5.6

Due to a slow ISP I would like to download and save tutorials on my hard drive, is this possible?

hI, I would like to download and save tutorials on my hard drive is this possible and ow do I do it?
My ISP Is very slow and Adobe TV does not work. 30 minutes tryingto open a single tutorial and nothing.

Not with iPhoto.
You can relocate the masters using Aperture if you're using the latest versions of both iPhoto and Aperture. However, if you're planning on using iPhoto going forward having the masters on one disk and the Library on another is not a good idea. Have a read of this
https://discussions.apple.com/thread/3062728?tstart=0

Iphone- I would like my lock and home screens to rotate

I would like my lock and home screens to rotate on my Iphone 5. Since I charge it at work and the charge port is at the bottom I have to lay it on it's side in my cradle. I'm constantly having to rotate it to view emails and texts. Is this possible?

No.

I would like to 'see and hear' my mac book pro output on my TV how do I ?

I have a new Mac book Pro and I would like to 'see and hear' the Audio and video on my television. My tv has 2 audio phono RCA jacks on the side and 1 video RCA jack on the side. It also has a s-video as well on the side (I have never used s-video.) My Mac Book Pro came with a DVI to VGA little cable adapter but how do I use this to get to my TV inputs? Do I have to buy from Apple, (or somewhere else), that cable called DVI to Video Adapter? but then that is only for the video? How do I get the audio out? From the headphone socket? And if this is the only way why hasn't Apple made their DVI out socket a dual purpose output ie: Video AND audio, like the mini DVI for the G4 powerbooks? Please help. If anyone has also come across this problem. I want to see my timeline in FCP on the TV before I put it to tape. Thanks.
Thanx

I have a new Mac book Pro and I would like to 'see
and hear' the Audio and video on my television. My tv
has 2 audio phono RCA jacks on the side and 1 video
RCA jack on the side. It also has a s-video as well
on the side (I have never used s-video.) My Mac Book
Pro came with a DVI to VGA little cable adapter but
how do I use this to get to my TV inputs? Do I have
to buy from Apple, (or somewhere else), that cable
called DVI to Video Adapter?
You need a DVI or VGA to svideo adapter. They aren't cheap.
but then that is only
for the video? How do I get the audio out? From the
headphone socket?
Yup.
And if this is the only way why
hasn't Apple made their DVI out socket a dual purpose
output ie: Video AND audio, like the mini DVI for the
G4 powerbooks?
Because DVI carries only video. Apple is using a new video card in the MBP with different abilities.
Please help. If anyone has also come
across this problem. I want to see my timeline in FCP
on the TV before I put it to tape. Thanks.
Most people doing this are using TV's with DVI/HDMI inputs.
Thanx

HT201301 How do I "Select All" in a Pages document? I would like to copy and past more than one paragraph at a time.

How do I "Select All" in a Pages document. I would like to copy and paste more than one paragraph at a time.

I just tab and hold untill the loop shows then let go and I get the menu with select all in it

HT4059 i purchased a tour guide book and would like to view and print from my PC, how can I?

i purchased a tour guide book and would like to view and print from my PC, how can I?

You purchased an ibook?
Can I print my books and PDFs from iBooks?
Yes, you can print PDFs and notes you've entered from iBooks, but the option to print ePub books is not available.2You can also email PDFs and notes you have written from iBooks."
iBooks: Frequently Asked Questions (FAQ)

I would like to see and access the correct sound patches from my E-mu mps orchestral plus from inside of logic express.

I would like to see and access the correct sound patches from my E-mu mps orchestral plus from inside of logic express.
Right now , I have access to some of the sound files but most are missing and all are incorrectly labeled.
Is it possible to ("Library") these sound files or access them from logic?
Thanks
J

HI,
I'm not quite sure who you think you are addressing here with your idea but this is a user to user forum. Apple don't come here.
If you want to offer ideas or feedback to Apple, it would be best for you to do it here:
http://www.apple.com/feedback/logic-pro.html

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

Is it possible to save an iPhone back up and access the files later if needed? I have a string of text sms and iMessages that I would like to save and then delete them from my phone. Is this possible?

I have a string of text sms and iMessages that I would like to save and then delete them from my phone, but gain access to them later if I need them. I prefer to have the string with the date/time stamp vs copying and pasting into a doc or text file. Is this possible?

Not unless you buy an app that accesses data from an iTunes backup. Check in the app store.

Would like to reformat and reinstall XP - having trouble because of thinkvantage

Similar Messages

Maybe you are looking for