Would like to send 'admin' message to all user of a forms application...?

Hello,
We are in 10g, and I have a specific issue I would like to talk with you...
I hope I will be clear... and that my termonology is not too bad !
In unix, it's possible for an administrator to send a message to all Unix sessions..
So, do you think it would be possible to do a similar functionality on a Forms application?.... so that an admin user could send a message to any user connected to the same form application...
Thanks a lot for your contribution,
Olivier

That functionality is part of the operating system in Unix. I don't think Forms provides for anything like that, unless you set up a timer in each form and check a database value every minute or so. The network might provided for something like that but you would have to check with the network guru's about that.
NumbNutz

Similar Messages

  • I have not downloaded my free pages  yet but would like to send a messages via email know from the notes application but do not know how

    l have not down oaded pages it is being processed however I would like to type up a messages on notes and sent it via e-lmail  can I and how?

    Bottom right corner.

  • Send the Message  to  all User

    Which  is  the function module  through which we can send the message to all User
    ASAP
    Sandeep Jadhav

    Hi,
    Use the function module
    TH_POPUP
    Refer this link
    how I send Instant system message to All online terminals
    Regards

  • I would like to send a message to my personal Apple ID from my personal Website? Is this possible?

    I've been building websites for some time. I've started re-coding everything in HTML 5 using CSS3. I would like for my site to work for me in the best possible way.  I've got an iPad, iPhone & well just about every iDevice you can think of. I would like for my clients to message me directly from my website. I noticed all "imessages" are sent to an Apple ID (this is linked to my current email). I would like to setup my website so that people can imput data into a form & it sends to my Apple ID when they hit submit. Almost like a "mailto:AppleID" . I was also reading that each phone number can have up to 2 apple ID's associated with it. So I would like to make a new id for my website.(that way when i get messages from my website I can know theyre from my website.)  Then my personal Apple ID.
    Has anyone created an API for this? I noticed the information is somewhat "hush" on iMessage development?
    <form>
    <input type="email" name="emailaddress" placeholder="[email protected]" required />
    </form>
    I know I can email and it's great and all. But I would like to get a text message because I like getting the notifications. I also like knowning that my website is producing leads. I think it'd be great to get your compnay involved with HTML development.
    <input type="appleid" id="your ID here" />
    I would like to use apple if possible to develop a user friendly API. This would be developed for website owners to link their Apple ID with their website.
    Any help would be appreciated.
    -Blake

    Hi,
    I have my Contact Testers page which has this HTML
    (opening tag here) a href="aim:goim?screenname=ralphjohnsr&message= Hi+!,+I+came+from+your+website,+ralphjohnsuk." (closing tag here) (opening tag here) img align="right" alt="Webmaster iChat Online Status Indicator" border="0" src="http://big.oscar.aol.com/ralphjohnsr?on_url=http://www.ralphjohns.co.uk//images/ RalphOn.gif& off_url=http://www.ralphjohns.co.uk//images/RalphOff.gif" /(closing tag here)(oen tag)/a(close tag) 
    I have added some linebreaks to make it fit the page here.
    This is obviously done using a valid AIM login name and the a href ="aim:goim? will launch an AIM Client and Message me.
    As you say you would create a New Apple ID then this would be iCloud and an AIM valid Name (keeping the Password to 16 characters or less).
    I am not aware of an iMessage equivalent that would do this to a Phone or iPad or to the Messages Beta as an iMessage.
    To be clear.
    What this HTML does is launch an AIM client (App) on the computer or the person viewing my page and then start a chat with the IM included in the HTML.
    To do that it queries the AIM servers as to whether I am On line or Line and show a pic relevant to that status.  (it does not stop Off Line IMs but I am set up for that.  It also does not say if I am Available or Away.)
    Edit to get html to show (not sure how to work this Raw code thing which dispalyed in the Reply wysiwyg screen.
    8:29 PM      Saturday; March 31, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)
    Message was edited by: Ralph Johns (UK)

  • How to send message to all users?

    Friends,
    Server os:RHEL AS 3
    client os: Windows XP SP2
    DB: 9iR2
    I would like to send a message to the users regarding the shutting down of the database.
    for example.
    we have six users in our test environment and they are using sql*plus.
    the users should get a message in their sql*plus regarding the database shutdown.
    how can i send a message to their sql*plus?
    thanks

    You aren't issue a shutdown normal, are you?
    In that case you have to wait until everyone has left Oracle.
    But normally one uses shutdown immediate and users will be disconnected gracefully.
    In that case a message is also not required, because everyone will get an error message, as soon as he/she attempts to do anything.
    But heck, why are you shutting down during office hours in the first place, and why don't you communicate with those developers about a timeframe you can shutdown?
    Sybrand Bakker
    Senior Oracle DBA

  • Idea of sending a message for all connected users.

    Dears,,,
    I'm trying to develop through oracle forms an idea of sending a pop-up message to all connected users.
    Example, I need to inform users to quit in 5 minutes due to a restart to the application server.
    I thought about a timer trigger that will check every 5 seconds or 10 seconds a value somewhere in a table. But I don't want to use the timer triggers associated in oracle forms.
    Is there any idea ?
    Please let me know.
    Joe

    Use Iframe tag.
    For this:
    Add an “IFRAME” in the base html file used (for example basejpi.htm file)
    <NOEMBED>
    </COMMENT>
    </NOEMBED></EMBED>
    </OBJECT>
    <!-- Forms applet definition (end) -->
    %HTMLafterForm%
    <IFRAME SRC="/forms/java/iframe.html">
    </BODY>
    </HTML>
    Then create an html file named "iframe.html" with the following content :
    <HTML>
    <HEAD>
    <meta http-equiv="refresh" content="10">
    </HEAD>
    <BODY>
    <H1>Please disconnect, The system will go Down !!!!</H1>
    </BODY>
    </HTML>
    Every time you would like to send a message, just add it in the iframe.html file ans users will see it.
    The iframe size can be customized.

  • Want to send public message to all oracle apps users while instance up

    Dear
    For the oracle apps & db maintenance activities, i would like to send public message, example 'Application will not available for 30 minutes from now'. This message must pop-up on user session. How can i achieve this?
    Help me!

    Ateeq,
    I do not think it is possible to send an alert message to all users notifying them that the system will be down. However, you can follow the steps in the following note to redirect the users to a different page or let them a get "The System is now Down for Maintenance" alert message.
    Note: 752540.1 - How To Redirect Some Users To Another Website While The Rest Of The Users Get The Normal "The System is now Down for Maintenance" Alert Message When the System Is Down For Maintenance
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=752540.1
    You may also review:
    Note: 310969.1 - How To Configure & Run Apache in Restricted Mode During Maintenance
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=310969.1
    Regards,
    Hussein

  • HT1688 My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can del

    My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can delete it?

    Thanks - the only thing is for a long time it would not allow my to select Edit - I tried it but - what ever - this time it did - THANKS - Mark

  • My PC Harddrive died along with all the CD's that I have saved to the Itunes library.  My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library.  Is this possible?

    My PC Harddrive died along with all the CD's that I have saved to the Itunes library.  My IPOD touch has the library still so I would like to send the data from the IPOD to the PC to restore my library.  Is this possible?

    Yes, by using a third-party utility such as Phone to PC or Phone to Mac.
    Also see How to dowload purchased music and Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I would like to send a text message to a cell phone when certain alarms occur.

    I would like to send a text message to a cell phone when certain alarms occur.
    I have read some of the other post which don't give a straight forward answer on how to accomplish this task.  Also the newest post on this topic is from 2005.  I'm sure things have changed since then.
    Please help me with a step by step solution.
    Thanks for your help!

    You may use U.C.ME-OPC to send text messages to any cell phone. You may use a cellular modem that is connects to a serial COM port. In addition you may send an email that will be received as an SMS or eamil. If you use a cellular modem you may also send commands (for example: change or query values) from your cell phone to Lookout through U.C.ME-OPC.
    U.C.ME-OPC connects to Lookout using OPC or DDE.  
    To learn more visit Control-See web site at www.controlsee.com .

  • I have a recorded movie clip on my desk top that I would like to send by email...How do I do that

    I have recorded a movie clip on a flip camera and downloaded it to iPhoto.  I would like to send it by email to an acquaintance.  Since iPhoto does not permit emailing of movie clips I saved the clip to my desktop and attempted to attach it to an email message.  No good...?file too big?  email would not load and send. 

    I would like to send it by email to an acquaintance.  Since iPhoto does not permit emailing of movie clips I saved the clip to my desktop and attempted to attach it to an email message.  No good...?file too big?  email would not load and send.
    Most internet providers allow email attachments limited to about 20 MBs—a few less. In cases where the file size exceeds this limit, you basically have three options:
    1) Re-compress the file to a smaller size. This usually involves reducing the display size along with a reduction in the data rate which often translates to degradation of quality. (I.e., Reducing the total data rate by half will reduce the file size by half.)
    2) If both parties share an IM connection, the file can be sent directly from one party to the other.
    3) Upload the main data file to a server and email a reference, QTL, or URL of its location to the receiving party who can then access/download the file. For instance, most ISPs allocate a certain amount of storage space to each user account. Many might be sufficient for your needs. If you have a MobileMe account, your movie can be shared/posted directly from iPhoto. There are also a number of sites, both free and commercial, that allow the uploading or sharing of such files. Some, like YouTube, are oriented towards viewing modified versions of you file while others allow downloading of the original file as uploaded. I believe all require a formal membership (free or paid) which is a sticking point for many people.
    In short, there are many options available and you will probably need to research which might best serve your needs.

  • HT6030 I would like to send an e-mail to a group of people I have the group created, but when I drag it to bcc or to it will not attach. can anymon help me with this?

    Help I would like to send an e-mail to a group of people,  I have the group created, but when I drag it to bcc or to- it will not attach. can anymon help me with this?

    In a new email message window start to type the name of the Group you have in Contacts/Address Book in the 'To' field - it should self-complete when it recognises the name.
    (Note: this only works with 'normal' Groups and not Smart 'Groups').

  • Color Picture of Steve Jobs that I would like to send to Apple for use in his honor. I prefer Color

      I would like to send Apple a Color Picture of Steve Jobs that I found on Google. it's the same picture Steve Jobs Biography that 
    Walter Isaacson wrote. except it's in color. What I did was use my Drawing Pad Program to bring in the picture and then I brought in a splash I croped with Steve Jobs 1955-2011 and saved it. I want you all at Apple to have a copy to use for his memormial eash year. And Thank you Tim Cook and everyone at Apple for honoring Steve's values in keeping Apple products the great products that they are and will remain. Siri is such a riot. I have so much with her. I was able to use Best Buy's Trade-in Program and I traded my iPad 2 in for the new iPad 3rd Generation. I am one that needs Siri to help me spell some words when I get brain lock. lol. .  She is also fun to play with. I asked her to tell me a joke, she came back with, " Two iPhones walk in a bar, I forget the rest. LOL. you all have an ad with this joke. I haven't asked her any questions on sports yet. I like figure skating in the winter olympics beacause it's so graceful.
    Very Sincerely,
    Janet Woodville

    You are not talking to Apple here. We are users like you who help each other with technical problems. If you would like to say something to Apple, click here.

  • HT1277 I would like to remove my photo from all outgoing email on my IMac computer. Can anyone tell me a way to do this? Thank you.

    I would like to remove my photo from all outgoing emails on my IMac. Could someone help? Thanks.

    I am guessing that you are referring to the image that Mail puts next to the headers - this is what is in your Address Book, and is just there for convenience.  Your photo is not sent with any message unless you attach it via a file or otherwise include it in the message contents.

  • I am a newbie to labview but have delt with plc's for the last 10 years. I would like to send and recieve certain integer, floating poin

    t, or binary files through the plc or micrologix communication port. This would allow me to build a front panel and change certain states of bits or retrieve data from certain files to display on the front panel. Please steer me in the right direction...I am a newbie to labview but have delt with plc's for the last 10 years. I would like to send and recieve certain integer, floating point, or binary files through the plc or micrologix communication port. This would allow me to build a front panel and change certain states of bits or retrieve data from certain files to display on the front panel. Please steer me in the right dir
    ection...

    t, or binary files through the plc or micrologix communication port. This would allow me to build a front panel and change certain states of bits or retrieve data from certain files to display on the front panel. Please steer me in the right direction...Another option is to talk to the PLC using Modbus. Several versions of Modbus drivers are available online--or I could send you the ones I use.
    The big thing to look at is exactly what you want to do in the end. If you are going to be able to use all the features of the DSC, by all means go for it. It will save you a lot of time.
    If however, all you want is a remote front panel for the PLC, the DSC might be overkill. Only you can say.
    Look at your entire application and where you can see your work going in the reasonable future.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for