Would PCI-1200 card be usable for Mac G-5 with Mac OS X if I use DDK?

I am migrating from a old Power Mac with Mac OS 9 to
Mac G-5 with Mac OS X but still would like to keep the PCI-1200 perfectly working. Can use use DDK to make it work since NI-DAQ is not uptodate with Mac G-5 and OS X?

Greetings,
According to the following KnowledgeBase, the PCI-1200 is not supported by the Measurement Hardware DDK.
KnowledgeBase: Measurement Hardware Driver Development Kit Frequently Asked Questions
Thus, you would need to use the PCI-1200's Register-Level Programmer Manual (link available below). If you want to use the Measurement Hardware DDK, you may want to consider replacing the PCI-1200 with an E Series device.
PCI-1200 Register-Level Programmer Manual Multifunction I/O Board for PCI Bus Computers
Good luck with yo
ur application.
Spencer S.

Similar Messages

Multi-port, bi direction DIO on older PCI-1200 card

Hopefully this is a simple request. I simply want to designate one of the (3) ports on a PCI-1200 card as an output port, and another as an input port. I seem to be able to do one or the other, but cannot initialize both. I'm attempting to run the dio_config to get (2) task id's. I'm beginning to think this isn't the correct approach. However, I haven't come across any examples where more than one port is initialized; one for output, one for input. Help!
Thanks,
-C

Hello C,
The problem you are having is probably due to the fact that when you configure one port, it resets the other. I�m attaching an example that shows how to configure all three ports without having them reset each other. The example sets them all the write, but should work when one is set to read.
If none of these suggestions help, or if I�m not correctly understanding your issue, please post the software and versions you are using, the applicable portions of your code, and any other information that may help, and I�ll be happy to look further into it.
Please let me know if this example doesn�t work for you, and have a nice day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments
Attachments:
Write_to_Digital_Ports.vi ‏82 KB

Card index software for MAC

Does anyone know of some good software that acts like a card-index - somewhere I can store information about books that I read/reviews/quotations? I've tried 'Googling' card-index software for mac, and various other permutations, but not come up with anything that looks any good - or at least I have, but it only works on Windows!
Any suggestions very welcome!
Thanks
iBook G4 Mac OS X (10.4.7)

somewhere I can store information about books that I read/reviews/quotations
Does it have to use a Card Index metaphor? There are many many snippet managers, that will grab things from, say, a web page and store them, index them for fast searching. They will also allow you to make notes etc, or annotate the clippings.
Search on http://www.macupdate.com for (in no particular order)
Voodoo Pad
Mori
Yojimbo
MacJournal
Circus Ponies Notebook
Journler
and many, many more.
Regards
TD

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work?

I have a Mac desktop OSX Version 10.7.4 upgraded to Lion to use iCloud. Now my Parallels Desktop 5 for Mac/Build 5.0.9376 using Windows 7 does not open. What upgrade of Parallels do I need to make this work? Or what do I need to do at this point?

Thank you Shootist007. I appreciate it!

Netgear PCI Wireless Card in a Power Mac G4

I have a Netgear PCI Wireless Card MA311 and I'm trying to make it work in my Power Mac G4. Does anyone know of any drivers I can use or any way I can get online with it? An alternate option is the Linksys Wireless-B USB adapter (ver.2.8) that I have around here somewhere.

Generally speaking, if you are planning on buying a PCI wireless card, do make sure that it is Mac compatible. Mac drivers for such cards or for USB wireless adapters can often be difficult or impossible to find.
Another option could be a wireless Ethernet bridge (also known as a gaming adapter) connected to the Ethernet port. These devices (examples include Belkin F5D7330, D-Link DWL-G810, D-Link DWL-G820, Linksys WET54G, Linksys WGA600N and Netgear WGE111) do not normally require special driver software, and can be used under almost any operating system. WPA security may or may not be supported for a certain unit, so study the specifications (a firmware update can solve this in some cases).
Jan

Can the PCI-6602 card be configured for 3.3 volts?

I would like to be able to configure my pci-6602 card to output 3.3 volt signals either in software or with MAX. Can this be done?

The 6602 uses only 5V logic for it's driven outputs, but there is a Tri-State Enable feature which drives the output to high impedance instead of hi. This allows you to pull up the outputs to the required logic voltage.
The Tri-State Enable is found using the wired OR map in the DIO Port Config.vi

Driver update problem - which new nVidia card to buy for Mac?

I have an old NVidia GEForce 9400 M driver running in a Mac OS X Mavericks Version 10.9.5, that will not work for Creative Cloud and I can not find an updated driver. Any suggestions as to what NVidia graphic card I should replace it with if a driver update can not be found?
[Title edited for clarity... Mod]

Check with Apple to find out which card is certified for your exact model computer

Buying Photoshop CS5 for mac and being able to use it?

I'm a Photography student and I need to get Photoshop, though I can only just about afford around £300. I don't want to rent it through Creative Cloud because not only will it cost me far too much after the amount of time I need it for is up, but I will no longer have it when my course is finished, which seems a shame since I'll not be able to use my education there after. Anyway, I've been looking into buying CS5 for mac as a Student/Teacher version, which is in my price range and has all of the ideal tools I need and then some.
My main worry is, I don't know how it works. Will Adobe still accept the license number for an old version, or will they turn it down in the hope that I'll turn to take on their Creative Cloud malarkey? I've found a seemingly good deal on Amazon, though the occasional review describes that Adobe aren't accepting their serial numbers. Saying that, the majority of reviews say that it installs fine with little hassle, so I'm not too sure on how it would treat me. I'm in England, incase that would affect anything. Any clues anyone?

You can do almost anything in Photoshop Elements that you can do in Photoshop. There are many third party plugins, some free, that will add functionality both to Photoshop and Photoshop Elements. I use both Photoshop CS5.5 and Photoshop Elements 5, 9, and 11 on various computers. Expert Mode in Photoshop Elements is most like Photoshop.
Why don't you download the trial of Photoshop Elements 13 and decide for yourself:
FAQ, common questions & answers | Adobe Photoshop Elements 13
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=KSNQY

I have Adobe Photoshop CS5 for Mac-OS, can this be used on a PC? I'm wanting to load onto a PC/laptop.

I have a version of Adobe Photoshop CS5 for Mac OS, which I use on my desktop. I've recently purchased an HP laptop, is there a way to use my licensed CS5 version of Photoshop on my new HP PC?

No, the CS5 software is operating system-specific and even if you were willing to trade for the Windows version you could not at this point due to that only being possible for the latest. release, CS6.

How to filter Outlook for Mac calendar events by category using AppleScript

Hi all --
I'm trying to write an Applescript on OSX to filter Outlook for Mac 2011 calendar events based on event categories, e.g. find all events tagged as "Conference". For example, I have a calendar event named "WWDC" that is found by the following script:
tell application "Microsoft Outlook"
set theCategoryConference to first category whose name is "Conference"
set theConferenceList to every calendar event whose (subject is "WWDC")
display dialog "There were " & (count of theConferenceList) & " Conferences."
set theEvent to item 1 of items of theConferenceList
display dialog "Categories contains conference: " & (categories of theEvent contains {theCategoryConference})
end tell
The above finds 1 event, and the final line displays "true" as this event has been tagged with the Conference category.
However what I really want to do is find all such events. The following fails to match any events:
set theConferenceList to every calendar event whose categories contains {theCategoryConference}
ThIs seems to me like it should work, but returns 0 matching events. Is there a different syntax to use, or is this a limitation of Outlook for Mac that perhaps doesn't allow filtering events based on a nested collection (the categories attribute on calendar event objects)?
Thanks!
Ramon

Hello
I don't have Outlook 2011 but only guess here.
Generally speaking, AppleScript's "whose" filter is very limited and does not support list containment test. So perhaps you'd have to resort to something like the following script, which actually scans the events for test.
tell application "Microsoft Outlook"
    my events_with_categories({category "Conference"})
end tell
on events_with_categories(cats)
        list cats : list of categories to be matched
        return list : list of calendar events whose categories contain every item of cats
    script o
        property ee : {}
        property cc : {}
        tell application "Microsoft Outlook"
            set ee to calendar events
            repeat with e in my ee
                set e to e's contents
                set cc to e's categories
                set _match to true
                repeat with c in cats
                    set c to c's contents
                    if c is not in my cc then
                        set _match to false
                        exit repeat
                    end if
                end repeat
                if _match then set end of my ee to e
            end repeat
            return my ee's contents
        end tell
    end script
    tell o to run
end events_with_categories
Notes.
* Script is not tested.
* IF this works but is too slow, we may try to speed it up by retrieving categories of events (list of lists) in one statement, by which we can dramatically reduce the total number of Apple Events to send.
Good luck,
H

Microsoft for Mac, Word doc freezes when using "command v" to paste

Macbook Pro (2014) when I work with Microsoft office, Word, and use the "command v" keys the entire Word doc freezes and I need to reboot entire computer. What is this?

Office for Mac questions in the Office for Mac forums http://answers.microsoft.com/en-us/mac?auth=1.

Is Apple working on a fix for editing photos for wallpaper, call contacts with photo, etc? The iPhone used to be so intuitive for everything but that tanked with the ios7 upgrade

iPhone 5 was so intuitive before the update. Editing photos has changed for the worst-any word of a fix for editing photos for wallpaper? Not a work around, a fix. If I wanted this kind of photo editing I'd still be using my droid x.
Anyway to go back to ios6?

Is Apple working on a fix for editing photos for wallpaper, call contacts with photo, etc?
How would we know?
What's broken that you think needs to be fixed?
Anyway to go back to ios6?
No

Which video card to buy for Mac Pro and AE CS3

I am about to purchase a new Mac Pro and am curious which video card to buy - particularly when it comes to rendering speed.
Apple offers the ATI Radeon HD 2600 XT with 256MB of GDDR3 as a standard option, with the NVIDIA GeForce 8800 GT with 512MB of GDDR3 as a $150 BTO option.
I primarily use AE CS3 using adaptive resolution in lieu of Open GL. The projects are very 3d intensive. My initial thought is that the NVIDIA card has more VRAM and would be a better pick - but would my $$$ be better off toward more RAM? Does using CS4 make a difference?
Any thoughts would be appreciated. And yes, I have searched the forums but have not found anything definitive.

Personally, I'd buy more RAM. The standard display card supplied with the Mac Pro will have perfectly good specs for AE and Prem Pro.
Yes, CS4 should render faster than CS3.

Graphics card upgrade options for Mac Pro (early 2008) Model 3.1

Hi,
What are my options if I wish to upgrade the stock graphics card? I seem to remember there being one that was about £80 but I can no longer check as the site is only listing the 2009 mac pros now.
Any assistance would be gratefully received!

Your current options are:
ATI 2600
Nvidia 8800
Nvidia 5600
Or third-party ATI 3870 Mac/PC Edition.
Presumably the new ATI 4870 will work in the Early 2008 MP, but requires OS X 10.5.7 which is not yet released. You can find benchmarks at Bare Feats.

Would PCI-1200 card be usable for Mac G-5 with Mac OS X if I use DDK?

Similar Messages

Maybe you are looking for