Would Pentium D work on MSI 915 GM-FR mobo?

Hey guys,
I was browsing Newegg last night and I came across an Intel Pentium D for $97.00.  My dad uses and MSI 915 GM-FR mobo (MS-7033) with LGA-775, with a P4 2.8 single core.  Would it be possible to install a Pentium D and have it work correctly with this mobo, even though it came out before pentium D?
THanks,
Alex T

Sorry, 915 series does NOT support Pentium D.
I think you may opt for the higher speed of P4, 3.6Ghz 661, they also on very cheap price... however, I doubt you can really feel the improvements. Your P4 2.8 single core, it should have hyperthreading already, right? the performance difference is quite little.. It's not 50% of improvement, probably just 10%.

Similar Messages

  • MSI 915 + MSI NX7600GT

    Hey ..everyone 
    System Specs: 
    MOBO: MSI 915 G Combo
    CPU  : Intel 2.8 GHz HT
    RAM  : 512x1 DDR1
    GPU  : MSI NX 7600 GT
    HDD : Maxtor 200 GB ATA
    I bought the GPU, in illusion that it might make my PC, work faster.. like it could take the Graphics load from the CPU -> GPU, and that could significantly improve the performance .. NOW, the thing is .. games on my PC run faster enough, I'm happy with that. But my system is bit slow, may be because of adding 7600 Card, the drivers may be consuming resources...!!
    Is there a way to like increase the performance of my system.. using the available resources ??
    I also want to upgrade my PC to 1 GB DDR2 RAM , will be going for that Next week probably .. I wanted to know
    1) What is the MAX Clock speed for RAM, that is compatible with my MOBO ??
    2) Should I go for 512x2 MB Modules or 1x1 GB Module ?? Which is faster ?
    3) Crosshair or Kingston .. I want a cheaper one :D
    thanks in advance..!! 

    hello,
    yep 512MB is very low for modern PC, especially for gaming machine also its in single CH..
    get 2x1GB or 2x512MB matched memory sticks(Kit), DDR1 or DDR2 type. (but not mixed)

  • Will Tualatin Celeron 1.4GHz CPU be working on MSI-6337?

    Will Tualatin Celeron 1.4GHz CPU be working on MSI-6337?
    ========================================
    MSI 815ept chipset mainboard
    I am planning to upgarde my CPU from Celeron 850 to Tualatin Celeron 1.4GHz
    But
    All I find on MSI web is "N/A" according to the link below:
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=15
    Does it mean 6337 is not able to make it at all, or practically Tualatin Celeron 1.4GHz CPU works fine on 6337?
    Do I have to use Tualatin Celeron 1.3GHz CPU instead?
    the mainboard bios is already the newest.
    Oh, thanks for any tip from you.

    Tualatin celeron 1.4G CPU working on MSI 815ept stuff
    So sorry to touble you.
    But I have to tell you something all about
    Tualatin celeron 1.4G CPU working on MSI 815ept stuff
    I bought a celeron 1.4 G cpu yesterday, and put it on my motherboard(815ept),
    well, When I finished formating my harddisk and began to install windows xp pro.
    windows Setup program hung.
    It stopped when program say "examing hard disk...stuff".
    so I replaced my hard drive by a Seagate 7200.7 80G hard disk and the same thing happened. it just hung.....
    It's confusing that to setup windows 98 is alright, not a slight error is reported.
    and i have to look back into
    http://www.msi.com.tw/program/products/m...tail.php?UID=15
    with that bold blue N/A
    I think Tualatin 1.3G cpu would work on my motherboard. And tomorrow, i'm gonna change for a 1.3G one.
    =================
    This is my crap:
    Intel Tualatin 1.4GHz CPU
    MSI 815ept motherboard
    Sound Blaster vibra 128
    Seagate U5 40G Hard Disk
    Philips 105G monitor
    G-force2 MX200 display adaptor
    Pioneer 120 DVD-ROM
    MSI 8152 CD-ROM
    Acer 52v keyboard
    D-Link 530tx 10/100 netcard
    ambient chipset modem
    and some other bargains.
    Oh, yes, Is that to sayWhat happened on my computer is an typical hardware conflict error?
    and have to change my cpu or something else, like motherboard?
    anyway I get used to using windows XP.
    windows 98, no , the big BLUE SCREEN just makes me sick.

  • Can't get "a name" to work in MSIE

    I am trying to get an image map to work in MSIE. It works
    well in Firefox, but doesn't go to the internal links when I load
    it in MSIE.
    The page is here:
    http://www.itla.net/index.cfm?sec=ITLA_Information&con=officers#Region11
    Any ideas? Thanks,
    Kirk

    It really makes so much more sense than littering your code
    with all of
    those named anchor tags....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Lionstone" <[email protected]> wrote in
    message
    news:esp1oh$g7n$[email protected]..
    > Great tip. Thanks! That would not have occured to me.
    >
    >
    > "Murray *ACE*" <[email protected]>
    wrote in message
    > news:esmm90$ob2$[email protected]..
    >> Anymore, I always use ids for my named anchors -
    >>
    >> <body>
    >> <div id="wrapper">
    >> ....
    >> <a href="#wrapper">back to top</a>
    >>
    >> which works wonderfully.
    >>
    >> --
    >> Murray --- ICQ 71997575
    >> Adobe Community Expert
    >> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >> ==================
    >>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >> ==================
    >>
    >>
    >> "Lionstone" <[email protected]>
    wrote in message
    >> news:esme3i$gep$[email protected]..
    >>> NP. They usually don't; I haven't figured out
    why they sometimes do. I
    >>> just keep that filed in the back of my brain. :)
    >>>
    >>> "kirkdickinson"
    <[email protected]> wrote in message
    >>> news:eskrhg$rrr$[email protected]..
    >>>> Bingo, That was it. Didn't think about the
    fact that the target anchors
    >>>> might need some content.
    >>>>
    >>>> Thanks,
    >>>
    >>>
    >>
    >>
    >
    >

  • Will this memory work on MSI K8T Neo2 Platinum?

    Hello,
    Im planning upgrade to 64-bit athlon soon, so I would like to ask you, if my Corsair memory will work on MSI K8T Neo2 Platinum with AMD 3200+ 64-bit (90nm) procesor.
    My memory: Twinx1024-3200LLPRO.
    http://www.corsairmemory.com/corsair/products/specs/twinx1024-3200llpro.pdf
    I would suicide myself if ill buy this motherboard and find out that my memory isnt working on it .
    I hope you will say yes.
    Thx

    i'd be more concerned about your PSU m8 - sorry to say others have reported loads of issues whilst using that PSU on this forum

  • Intel Pentium D 925+ on MSI 975X Platinum v1, won't install Vista

    I have this 2 components - Intel Pentium D 925+ on MSI 975X Platinum v1 - and a licenced Vista Ultimate won't install with them. I had first an Intel Pentium 4 640 and worked great. Than I've changed the CPU to Intel Pentium D 925+. When I first boot in Vista it hanged the system during the green bar sliding. Changed to XP, worked just fine. Tried again to install Vista, after booting from DVD and loading the files needed, the green bar goes again and after 2-3 passes it hanged again. I found that there is the latest bios available 1.4 and made an bios update... Then I retried to install vista.. It worked just fine... Decompressed the files, copied them onto hard drive, and after the first restart , when the screen appears again on installing and says "Completeing installation ..." it hangs again.   I just can't pass this phase no matter what I do and tried to install about... 30 times, every install being a clean install, formatting the hard drive. Every single time it hangs just there. Can anyone tell me what is wrong?

    I've found the problem if anyone is interesting in knowing it and if maybe someone is having the same problem as me.... just disable EIST (Enhanced Intel SpeedStep Technology) from bios and it will work smooth. Oh   PS, and if Vista isn't ment for public use then why was it released by Microsoft in so many versions even a home version? Do you even know what you're saying with that affirmation? Or you're just a end user that is just too lasy to try understanding Vista or even learning where these operating systems are going to? Saying that if it works just fine on XP why should I install Vista...???????

  • I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I hav

    I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I have been using Apple products for years, always touting their reliability and customer service. I am not a techie, I just want to be able to do what I do on the computer and Apple always fulfilled my needs. Now I am told because of some operating system gobbledygook, I have to go out and purchase new software to use Word. This is despicable. I see no particular benefit to using Lion, but I do see a lot of detriments. Apple now seems to have turned into Microsoft, making software obsolete so they can make more money and to **** with the customer. You can be sure that my next computer will be a PC. I have completely lost confidence in Apple.

    I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
    I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
    As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

  • I wanted to buy a Dragon ,Speech Recognition Programme for Mac but it says its for Lion, and I have Snow Leopard. Would it have worked on Snow leopard?

    I wanted to buy a Dragon ,Speech Recognition Programme for Mac but it says its for OS Lion, and I have OS Snow Leopard. Would it have worked on Snow Leopard?

    The simplest method would be to ask them for their Snow Leopard version and say you can't upgrade to 10.7 or 10.8. I'm almost sure they will sell you a copy.
    Generally if your machine can only upgrade to 10.7 Lion and not directly to 10.8 Mountain Lion, then it's best left on 10.6.8. in my opinion as your going to loose too much other software and slow down your machine in the process.
    This rapid OS X upgrade cycle has caused plenty of problems for users and developers alike, so I suspect you will find a sympathizer with the developer.
    In fact I'm not recommending Mac's to anyone anymore because Apple simply has lost touch with reality.

  • Hello, I'm a french Photoshop CC user. My one is in english language, and I would like to work with french language. How can I do to have french language ?

    Hello, I'm a french Photoshop CC user. My one is in english language, and I would like to work with french language. How can I do to have french language ?

    In the CC Desktop app, click the gear > Preferences > App tab > choose Application Language, then install Photoshop CC
    Once the install finishes, Photoshop Preferences > Interface > UI Language, change to French, Restart Photoshop.

  • I am new to iOS and just have basics understanding regarding App Development. I would like to work on IRKIT. Any Beginner Guide or reference regarding IRKIT ?

    I am new to iOS and just have basics understanding regarding App Development. I would like to work on IRKIT. Any Beginner Guide or reference regarding IRKIT ?

    Restore from iTune Backup
    1. Settings>General>Reset>Erase all content and settings
    2. You will be asked twice if you want to erase iPad
    3. Slide to set up
    4. Select Language
    5. Select Country
    6. (a) Use Location Service   (b) Don't use Location Service
    7. Choose Wi-Fi Network
    8. Enter Wi-Fi password
    9. (a) Setup as new (b) Restore from iCloud Backup (c) Restore from iTune Backup
    10. Select "Restore from iTune Backup"
    11. You will be instructed to connect to iTune (computer)
    On computer
    12. Two options offered
    13. (a) Set up as new iPad (b) Restore from backup (a list of backup will be shown)
    14. Select Restore from backup and select the backup
    15. Continue
    16. Restoring iPad from backup
    17. The settings for iPad restored

  • Would crtl+f work or is there another way to search or quickly hyperlink to different sections on the page?

    We have a very long extended data tab full of custom sections and we would like to be able to give a user a way to search the page quickly.
    Would crtl+f work or is there another way to search or quickly hyperlink to different sections on the page?

    I don't know enough about your use case to provide specific direction but you may be able to use the 6.1.1 UI extensibility point.  For example, you could add an anchor link collection control that scrolls the page to the top of each section when selected. 

  • I would like to work with DICOM files so I may buy Photoshop CS6 Extended. Can a TIFF be exported from a DICOM file in Photoshop CS6 Extended?

    I would like to work with DICOM files so I may buy Photoshop CS6 Extended. Can a TIFF be exported from a DICOM file in Photoshop CS6 Extended?

    Also, I am looking through the Adobe website, and I can't find any place where Photoshop CS6 Extended is even offered for purchase. Is it extremely well hidden, or is it not available?

  • I currently have Photoshop Elements 7 on my Personal Computer. I would like to buy Photoshop Elements 13 for my laptop. Would version 13 work without version 7 on my laptop? Or do I first need to install version 7 on my laptop?

    I currently have Photoshop Elements 7 on my Personal Computer.
    I would like to buy Photoshop Elements 13 for my laptop. Would version 13 work without version 7 on my laptop? Or do I first need to install version 7 on my laptop?

    Yes you can directly use the upgrade version.
    You can visit this page Photoshop Elements (PSE) knowledge base. for further assistance.
    Regards
    Kishan

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • Good .. I would like to work together I have an iphone 63gs 16gb, I do not read the sim card in itunes gave him the option restore and now I get on the screen that you can not do iphone activation would help me. I'm from Colombia

    Typgood .. I would like to work together I have an iphone 63gs 16gb, I do not read the sim card in itunes gave him the option restore and now I get on the screen that you can not do iphone activation would help me. I'm from Colombia

    Activation requires a SIM card.
    Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

Maybe you are looking for