Would PKI Infrastructure be affected when upgrading schema from Windows 2003

Hi
I am planning my schema upgrade from either Windows 2003 to Windows 2008 or from Windows 2003 to Windows 2012.
I would like to know if in any of these scenarios would my PKI Infrastructure be affected?
Thanks.
Regards
Andre Thompson
Regards Andre Thompson

Hi,
If currently you are using a Windows Server 2003 as a DC, and you are going to add a new Windows Server 2008 or 2012 to your environment, you will need to demote it first - if CA is installed on that 2003 DC, you will need to uninstall it for demotion.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/94fa88e6-b299-436c-bca1-e88b45ea86b8/impacts-when-upgrading-only-ca-servers-to-2008-r2-in-a-2003-domain?forum=winserversecurity
If you have any feedback on our support, please send to [email protected]

Similar Messages

Inplace and side by side upgrade from windows 2003 64 bit R2 contains SSRS 2008 R2 to windows 2008 64 bit R2

Hello All,
   Case 1 -In place upgrade
   I would like to do in place upgrade from windows 2003 64 bit R2 that contains SSRS 2008 to windows 2008 R2 64 bit. The upgrade would be happened at OS level not at SSRS level.
   I would like to know what are the necessary steps should be taken prior/during/post upgrade from SSRS end as we can not rollback if there is some issue with in place upgrade.
Case 2-Side by side upgrade
I would like to do side by side migration from windows 2003 32 bit that contains SSRS 2008 to windows 2008 R2 64 bit. The side by side would be happened at both OS level and SSRS level.
  I would like to know what are the necessary steps should be taken prior/during/post side by side migration from SSRS end.

Before doing anything Take backups .
In case of reporting services..
Back up your symmetric key. For more information.
Back up your report server databases and configuration files. For more information.
Back up any customizations to existing Reporting Services virtual directories in IIS.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Thanks,
Shashikant

Are return codes from APIs different when upgrading DOT from 8.0.3 to 8.1.4/8.2.3 (7-mode only)

Customer is looking to upgrade from DOT 8.0.3 to 8.1.4/8.2.3 (7-mode). There are no real API changes between these upgrades other than additional functionality being added. Howver, are the return codes from APIs any different when upgrading DOT from 8.0.3 to 8.1.4/8.2.3 (7-mode only)? Any help on this to help confirm would be greatly appreciated. Many Thanks in advance. Luke

Thanks. I had the Portal 3.0.6/3.0.7/3.0.8 to Portal 3.0.9 upgrade scripts and instructions, but thought that was my last step. I hesitated on running the Portal Configuration Assistant. None of the instructions told me what to do at this point.
Anyways, it looks that by running the Portal Configuration Assitant at the end of the 1.0.2.2 9iAS install, it created a new repository for Portal 3.0.9 in my database. Since I gave it a different schema name, I now have two portal repositories. The old Portal 3.0.6 repository (jvac_portal30) and the new Portal 3.0.9 repository (j_portal30).
So, I assume I have to perform the upgrade scripts on the Portal 3.0.6 repository to get it to 3.0.9. Since we really did not have very much in the repository, we may just manually recreate everything in the new 3.0.9 repository. I have ssen several discussion threads about the upgrade and problems, so I am very leary to do it.
In regards to our J Server propblem, we left for lunch. Came back and rebooted several more times, double checked all our configuration files (made no changes), stopped and restarted Apache several more times, and then by some miracle everything started working.
null

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

SAP Server upgrade from Windows 2003 and 2008 R2 with Oracle Database

Hi,
We need to upgrade upgrade our Windows servers that are running our SAP systems from Windows Server 2003 to Windows Server 2008 R2. We are using Microsoft Clustering for HA so an inplace upgrade seems not possible.
Someone has suggested to us that we will need to export our database and reimport it to achieve this upgrade however but I cannot understand why this would be necessary (we are not changing the underlying filesystem!).
Could someone please confirm whether a database export and import is required for this OS upgrade scenario? I have done a bit of research but nothing has jumped out and now I need an answer to this quickly.
We are running
- ERP 6.0 NW 7.01 (soon to be 7.02 with ABAP stack only)
- XI(PI) Java & ABAP
- SRM (Java & ABAP)
- Portal (Java only)
- PLM (Java & ABAP)
- BW (BI 7.0) (Java and ABAP)
Thank You
Felicity

Hello,
You need to go for 'Homogeneous System Copy' to achieve this, but since almost all the systems in your landscape include the Java Stack as well - so the system copy with Export/Import is to be carried out.
Even if you are not going for file system change, but it is a Windows environment and you can't put SAP up on the target Windows (windows 2008 R2) just by copying the contents and file system from source to target. You need SAPinst to create the registry and all. - On top of that you have Java stacks involved, so for java stack you can't carry out just backup/restore method to put SAP up there on target - so you need Export/import because for java stack some OS level dump is to be collected during system copy from source and it needs to be imported on target OS.
Are you clear on this one ?
Read system copy guide once and Search in OSS for the Notes to check how to upgrade from Windows 2003 to Windows 2008 R2.
Thanks

Upgrade Multiple servers from windows 2003 to 2008

Hi All,
How could i upgrade all my servers (1000 around) from Windows 2003 to Windows 2008 R2 without loosing system settings, profiles and applications.
Your speedy reply is highly appreciated.

Since Windows Server 2008 R2 only supports 64-bit the first thing to check is that all of your 2003 boxes are running 64-bit Windows. If they are then an in-place upgrade is possible, but if they're running 32-bit Windows then there is no way to directly
upgrade them. Your only option with 32-bit Windows 2003 is to either upgrade to 2008 (which does support 32-bit), or migrate everything to a new server.
Other than that, the question then becomes what are those servers running. If they're running Microsoft services then it should be fairly straight forward, but if they're running 3rd party services then you need to check with the 3rd party company whether
their software (or more specifically the version of their software you currently have installed) supports 2008 R2.
For the Windows services there are some differences, but I believe the upgrade process handles the transition for you for the most part. Have a look at
http://technet.microsoft.com/en-us/library/ff972408(v=ws.10).aspx which details the process, and goes into the changes for each of the main Windows Server roles, and those things
you need to be aware of. As mentioned in that article, when you start the upgrade process you're offered a link to a compatibility report which will tell you if there's anything on the server which will break or cause issues with the upgrade. View that report
and review what it tells you before you start the upgrade. You may find that some tools, addons etc need to be uninstalled or upgraded before you can start the actual upgrade, but if the report gives you the green light you should be fine to continue without
any issues.
Finally, from the wording of your question I'm guessing you're wondering about getting the servers upgraded at the same time? Personally I'm not aware of any way to do that, but even if one did exist I wouldn't do it. There's too much of a chance that something
will go wrong, probably in some small minor way, but if you've just tried to upgrade all the servers at the same time, when you get reports telling you that something is no longer working you'll have a much harder time working out what caused it than if you
know that only servers a, b and c have been upgraded today, so the issue is likely to be with one of those.

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Can I resolve this?

I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management. Any ideas how I can get access to these now?

Hi Blotontheland,
Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

When i switched from windows vista to windows 7 my songs on itunes dont play fully they are cut off even on ipod..any suggestions?

When I switched from windows vista to windows 7 on a new computer my ipod doesnt play songs from itunes fully it cuts them off before they play out entirely. Any suggestions?

Delete the current copy, don't hide from iTunes in the cloud if prompted, close iTunes, reopen, download from iTunes Store > Quicklinks > Purchased > Music > Not on this computer.
While downloading click the download icon and uncheck Enable simultaneous downloads. You may find it more reliable that way.
tt2

Recently upgraded laptop from Windows Vista 2 Windows 7. I had 2 delete itunes,then download again.Music etc purchased over 2 years is in library,soon as I try to play,message saying it can't be located! Any Help?

Recently upgraded laptop from Windows Vista 2 Windows 7. I had 2 delete itunes,then download again.Music etc purchased over 2 years is in library,soon as I try to play,message saying it can't be located! Any Help?

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

My macbook pro out of screen when i switch from windows to mac

my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

my macbook pro out of screen when i switch from windows to mac , mac is running but out of screen , what should i do??

When I move from window to window my screen has weird pixels

Hello,
Sometimes when I move from window to window there are appeared weird pixels on the screen.
It seems that the image is not processed fast enough.
Any advices?

hello, have you set any other dpi value in your operating system than the default one (96dpi)? more information about that is available at http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_use_large_or_small_fonts.mspx

When upgrading OS from Mavericks to Yosemite, the computer freezed at "Running package scripts" and don't go further, what should I do now?

iMac 21.5"/IRISPRO/2.7QC/2x4GB/1TB OS Mavericks. When upgrading to Yosemite, time remaining is 8 minutes and freezed and don't go further for couple of 6 hours. What should I do now?

Force a restart by holding down the power button. See what happens.

Document Problems when upgrading B1 from 2004 to 2005

When upgrading from B1 2004 to b1 2005 any documents over 2 pages cause B1 to crash - anyone found the same problem or a solution.

Hi clive
When you say it crashes, does it just close and no error. i've came across that problem when making complex documents. If you have made your document as an A4 document, check what the default printer is? Go to file->page setup .You'll see the printer it will print with and it's page size (letter,A4,etc). Make sure that is the same as the one you have set in the pld in the document.
Hope this helps

The mis-mapping problem when upgrading OWB from 11.1 to 11.2.0.2.

Hi all,
Our OWB ETL program was developed initially on OWB 11.1 platform.
Then after upgrading it from 11.1 to 11.2.0.2, several mappings are mismatched in the deployment PL/SQL package as below:
CREATE OR REPLACE PACKAGE BODY "MAP_PRODUCT_LIFE_CRT" AS
CURSOR "T_T_PRODUCT_LIFE_c" IS
SELECT
/* T_PRODUCT_LIFE.T_T_PRODUCT_LIFE.INOUTGRP1 */
"T_T_PRODUCT_LIFE"."INS_TYPE" "ORGAN_ID$1",
"T_T_PRODUCT_LIFE"."START_DATE" "HOSPITAL_TYPE$1",
"T_T_PRODUCT_LIFE"."END_DATE" "UNIT_FLAG$1",
"T_T_PRODUCT_LIFE"."LIFE_RATE" "INS_TYPE",
You can see that the field mapping is wrong! We have about 100 mappings, but only some of them go wrong.
We have tried the Metadata Loader and Repository Assistant for the upgrading, but the results are the same.
We have released all OWB patches on 11.2.0.2, but the results are the same.
Please help on it!

Hi David,
Besides the mega patch 10185523, we also have applied other tens of patches, e.g. 10225308, 11671955, 11705023, 1768535, etc.
Now we find that the wrong field mapping just appears in the row-based part of the mapping package. So if the set-based mode works well for the mapping execution, no error will happen. That's why we just found the problems in several mappings.
And one thing is even worse. In the patched OWB 11.2.0.2 env., we tried creating totally new mapping. The result is the same: the wrong field mapping still appears in the row-based part of the mapping package.
So this problem seems not related to the upgrading.
Regards.

Windows 8.1 Pro upgrade issue (from Windows 8 Pro) on Envy 23 TouchSmart All-In-One...

Hello,
I have an HP Envy 23 Touchsmart All-In-One that I purchased a year ago (around 12/2012). It came preinstalled with Windows 8.
System Information:
a) Intel(R) Core(TM) i7-3770S CPU @ 3.10 GHz
b) 8192 MB of RAM
A few weeks after I had bought the system, I upgraded to Windows 8 Pro with Media Center that I purchased through Microsoft's upgrade program.
Last week (10/19/2013), I saw the upgrade option to Windows 8.1 in the store and decided to upgrade.
After a few minutes, I got a prompt asking me to restart the computer and I did.
However, I noticed that the screen went blank, but it really didn't restart - I saw that the hard disk light was still blinking and I waited for around 15 minutes. I know it didn't restart because if it did I would have seen the HP logo on the BIOS screen. A little later, the system went into sleep mode (at least, the power button light was blinking slowly as if it was on sleep). Since it was late at night, I decided to leave the system alone and decided to check on it next morning. Next morning, it was still in sleep mode (as I feared) - when I tried to wake it up from sleep by moving the mouse/hitting the return key, it made the exact sounds as if it was waking up from sleep (as it always does), but the screen was still blank. The power button slight was glowing steadily indicating that it is awake now.
At this point, I decided to power down the system by holding the power button for a few seconds. Upon reboot, I saw the HP logo on the BIOS bootup screen and then the screen went blank and nothing came up.
So I decided to do a system recovery using my Windows 8 recovery CD and powered down the system with the CD in its slot. This time, the system came up and immediately started restoring my OS to a previous version.
Upon logging in to the recovered system, I got the following message:
"Couldn't update to Windows 8.1
Sorry, we couldn't complete the update to Windows 8.1. We've restored your previous version of Windows to this PC.
0xC1900101 - 0x40019".
I tried reinstalling Windows 8.1 a couple of times after this. Once by disabling all the non-Microsoft services and disabling all the startup programs. Still the same result.
I don't have any antivirus software on my system other the default Microsoft system protection software.
Any help, much appreciated.
Thanks.
This question was solved.
View Solution.

I've posted the following on the following Microsoft form.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/81-install-error-0xc1900...
Since my hardware is the subject of this HP thread, I thought it might be advantagous to others to post it here too.
In the hopes of preventing anyone else expending this amount of time:
HP Envy 23, no external devices except wireless keyboard&mouse
1) Attempted 8.1 from MSDN ISO download and dvd burn. Result: 0xc1900101-0x40019
2) Attempted 8.1 from MSDN ISO download and dvd burn just because I didn't believe number 1. Result: 0xc1900101-0x40019
3) Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
4) Attempted 8.1 from Microsoft store just because I didn't believe number 3 Result: 0xc1900101-0x40019
5) Read online that Task Manager, startup, disable all would work. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
6) Read online that enabling security to admin group for Crypto directory. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
7) Read online that ensuring drivers are all current. MS update, HP update, physically clicked on each driver, update in Device manager, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
8) Read online that turning Firewall off, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
9) Woke up this morning and evidently Win 8.0 decided on its own to Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
Good news: Fall back to 8.0 has been flawless with the exception of the need to reenter the network key.
Bad news: Still on 8.0
Based on, in every case, the upgraded machine can be: Accessed via admin share c$ from a network device and can NOT be remoted into and the local display is 'illuminated' but not responsive and dark black (BSOD), my GUESS is a screen / display driver is failing on first boot to 8.1
I've reviewed everything on the C: drive with the extension "log" and a date close to the install date/time without success of isolating exactly what is failing.
Hope no one else expends this much time.
David
Professional Developer

Would PKI Infrastructure be affected when upgrading schema from Windows 2003

Similar Messages

Maybe you are looking for