Would RV80HGEN turn on the 'Active' indicator in VOFM

Hi Guru, does any body know if RV80HGEN will turn on the 'Active indicator' in VOFM? Or does it only generate the codes for all routines marked as 'ACTIVE' in VOFM?
When we do the transport from test to QA, newly created routines are "INACTIVE" in QA even the active flag is turned on in test client when the transport is created. All the help documents stated we need to use RV80HGEN to active/generate the new routine, but it does not turn on the 'ACTIVE' set in VOFM, table TFRM in our case.
Any advice is appreciated.

Found out our issue was due to a missing transport. Issue solved

Similar Messages

Merge operation in Lightroom cc turn off the active filter

Merge to HDR / Panorama turn off the active filter in LR

Yes, this is to prevent confusion when the merge result falls outside of the active filter and is thus hidden from the user. Sometimes it will, sometimes it won't - so we chose consistency of behavior.
You should be able to prevent this by clicking the padlock icon in the upper right of the grid view and filter area. This will lock the filter.

Turning off the sleep indicator in the display release latch.

Can I turn off the sleep indicator in the display release latch even though it is still sleeping?
(At night time my bedroom looks like its being invaded by Aliens)
TIA.
12.PB. (Rev A). & MBP Mac OS X (10.4.8)
12.PB. (Rev A). & MBP Mac OS X (10.4.6)

...duct tape?
Apple released an update a while back to control the brightness of the sleep indicator, but it was only for certain G5 models. Quick perusal of apple support didn't turn up anything. Coworker swears that the brightness is controlled by the ambient light sensor, but I certainly can't tell the difference in a bright vs dark room...

Can't find the activity indicator in ver 29.0

the activity indicator is gone, it's not on the toolbar or in the custom folder.
can't tell if firefox froze or if the web site just takes a long time to load with out it

I've made a request thread for this to become an add-on, and I'm also going to put down an add-on bounty of $15 if someone can make it by the end of this month.

Need to turn off the activation lock, I didn't buy it or find it

My dad bought ~50 iphone 5s for his business. He is upgrading his phone to a 6 and wants to give me his old 5. His IT guy accidentally erased the phone without disabling the icloud activation lock. My dad has too many emails and no idea of the right one for the apple ID of this particular phone.

Take it and its original purchase receipt to a physical Apple Store.
(117270)

Problem with TFRM table active indicator in pricing routine RV80HGEN

Hi experts,
I have created few custom routines in VOFM tcode, and trasported to Q system.
In DEV in program RV61ANNN and in VOFM tcode, i can see the new includes and new routines.
But when i check in Q system in VOFM tcode the new routines are not available, nor in RV61ANNN program(new includes).
I have run the report RV80HGEN . But its not working.
I checked the table TFRM and the active field is blank for the group number and routine number.
But in DEV TFRM table has an X value in active field for that routine.
I dont know how to do it.
I can retransport the request again, but i dont know what all the objects needs to be created a new request. its risky.
Plz help me out on this.
I have checked OSS notes, even it says the same.nothing else.
Points are rewarded fully.
Thsnks,
KK

Hi,
The problem is with the active field blank in the test system. From OSS note 327220:
(02) Question/problem:
Even though report RV80HGEN was executed, the VOFM object is not registered in the object carrier. Why?
(02) Answer:
During the setup of the object carriers via RV80HGEN the system includes only VOFM objects which have set the 'active indicator' (refer to section 2.3.2). If the active indicator for the corresponding object is not set, the RV80HGEN does not process the VOFM object. Solution: Set the active indicator for the respective object and start the RV80HGEN again.
So I might suggest deactivating the object in development, transporting, then reactivating the object in development, and transporting again.
BR,
Tony.

(Help!) Free subscription magazine app - rejected twice for same bug - Specifically, the activity in

Hi,
Here's the rejection response for the app.
2.2
We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 7.1, on both Wi-Fi and cellular networks, which is not in compliance with the App Store Review Guidelines.
Specifically, the activity indicator spins indefinitely purchasing a subscription. Please see the attached screenshot for details.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.
Screenshot_0.png
I had the same rejection the first time. After looking online at Adobe I thought it was a billing issue, so managed to get that rectifed. I hadnt used a shared secret (as it hadnt shown up because, I thought, the billing wasnt setup correctly). After we corrected the billing, I had access to the shared secret which I have used.
Any ideas what else this could be?
The app is a magazine app which is for free subscription. That's the inapp purchase. No folio in app purchases, because they are free. Sent with the first version on the magazine published, although Apple coulnt have got to it as the subscription time's out.
Help! Because this is the second rejection, it's two weeks on and I am getting close to an event which I must have the app live for.
Thanks for any help,
Matt

Hi Neil,
I used the guide to make the issue — so I think everything is in place.
The first time around our billing wasn't setup so I didn't get to generate a shared secret. The second time I did.
I generated the secret — which I can view under the in app purchase for the (free) subscription in manage in-app purchases. That code I pasted into the admin account iTunes Connect Shared Secret panel for the same customer ID (Account ID). I opened the Folio Producer Organiser afterward — how do you know it registers the code? I didn't see anything to indicate such.
One thing — not sure if it's relevant — whenever the app fails it highlights in yellow the languages in the in-app purchase. I selected more languages this time to cover all the different kinds of English. Again, not sure if that's relevant?
Plus when I click the link to view the app in the app store it says it’s not in the UK store and tries to switch to the US, which if you allow it then says it can’t find. I think this is because it’s not approved and the link will be good when that happens (hence I copied that into the section just below the shared secret on the DPS account admin panel).
Honestly, I am a wee bit stumped now.

HOW CAN I HIDE THE ACTIVITY IINDCATOR? IT MAKES ME DIZZY & NAUSEAUS TO HAVE IT GOING 24/7

HOW DO I REMOVE THE ACTIVITY INDICATOR ON LOWER LEFT IN NEW VERSION???
IT'S MAKING ME DIZZY & NAUSEAUS MOVING 24/7
PLEASE LET ME KNOW ASAP AS I'M CHANGING SERVERS UNTIL THIS IS GONE -GIVES ME A HEADACHE

Hi - I've done what you said - installed :
"and reading postings that were typed in all caps gives me eye strain and a headache
This extension will restore the older status bar type of appearance to the Add-on Bar.
https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/ "
But the real time web browsing status still remains, only in different font w/ different background
How can I remove this 24/7 moving font - hurts eyes/head to have something moving so fast w/ out stopping while I'm working

Hello! I would like to know the procedure to turn a word document into a PDF document via Adobe Reader.

Hello! I would like to know the procedure to turn a word document into a PDF document via Adobe Reader. Do I have to pay for it or just sign up? Thank you in advance.

"...the procedure to turn a word document into a PDF document via Adobe Reader."
Not possible.
No version of Adobe Reader can:
--| create PDF
--| manipulate PDF page content
--| export PDF page content
Adobe Reader XI does provide a "connection" to various Adobe hosted online subscription services (that are under "acrobat.com").
There is a subscription services can create PDF from supported file formats that are uploaded to the service.
This subscription service is "PDF Pack".
With an active (paid up) subscription to a service one can make use of the service.
Be well...

Would there be any reason for logs to show up in the activity terminal while a computer is not in use?

I have an activity log on my mac from Dec. 7th, at 12:48pm-12:49pm...no one was anywhere near the mac at the time, as we were all downstairs having tea with family. Is it possible for the log to happen without anyone accessing the computer? it was the admin account only...the other two accounts show nothing on the log. The other thing of concern, is that this popped up with it: device_generate_desktop_screenshot.
Is something taking screenshots of my mac? I would paste the full code, but I freaked myself out already, so the mac is off for the night and the wifi is turned off on the mac, as well. Last thing, is that my fully charged mac was so dead it wouldn't boot on Sunday evening, and I hadn't touched it since Friday...is that related?
thanks.

But when I do this, none of the express units show up in the utility anymore. Should I just take it as a blessing that it seems to be working, and not mess with it?
Did you power cycle the entire network to get things in proper sequence?
If not, power off everything....all devices....order is not important
Wait a few minutes
Power up the modem first and let it run a moment or two
Power up the Time Capsule the same way
Power up the powerline devices
Power up each Express one at a time
Power up other devices one at at time
What should the internet setting be on the time capsule and airport expresses.
The setting on the Time Capsule will depend on the type of modem that you have connected. It sounds like the "Share a public IP address" would be correct for the Time Capsule. Everything else must be in "Bridge Mode"
Each of the AirPort Express devices must be configured to "Create a wireless network" using the same wireless network name, security setting and password as the Time Capsule network. Set the Channels as "Automatic" and double check as the last configuration step to make sure that they are set for Bridge Mode.
Then restart the entire network as outlined above and you are in business.
The Express devices should definitely show up in AirPort Utility when you have everything set up.

[svn:fx-trunk] 12552: DataGroup now tracks the indices of the active virtual item renderers with a list , rather than the min/max values.

Revision: 12552
Revision: 12552
Author:   [email protected]
Date:     2009-12-04 13:45:12 -0800 (Fri, 04 Dec 2009)
Log Message:
DataGroup now tracks the indices of the active virtual item renderers with a list, rather than the min/max values.
DataGroup/addItemRendererToDisplayList() now respects the overlay.
QE notes:
Doc notes:
Bugs: sdk-24052
Reviewer:
Tests run: DataGroup, List
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24052
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Hello Martin:
Thanks for your input. However I am not certain we have resolved this issue adequately, or understand the principles governing the css as regards this spry menu framework 2.0 (1.0).
For example, the menu only works in IE 6.0 if the css remains in the head. I agree with your original post that it shouldn't make any difference whether the css is posted in the head or in a separate style sheet (so long as specificity issues are addressed). Both should work -- and yet it doesn't.
If the CSS is placed in the separate style sheet governing the total site, it doesn't work for 6.0. If placed at the top of the style sheet, conflicts of specificity prevent the menu from rendering properly in any of the browsers causing the rules for general links to govern the menu.   This has been verified using a cross browser testing. If the styles are placed at the bottom of the style sheet to help them take precedence, they work in all the browsers except for IE 6.
The website I am building needs to support IE 6 for a variety of reasons, and because it is catering to the non-profit community and to low income persons, I am mindful of even small differences in page weight.
So for me, at least, the issue remains baffling.
I appreciate your input, but also would appreciate the input from others, and especially Adobe Community Professionals and employees. The spry framework in this regard is not well documented. I am not certain if this is exclusively a CSS problem, if it might also be complicated by the architecture of the spry framework, or if indeed other variables are at play.
I would be my hope that in resolving the problem, other users of the this particular spry framework might also benefit.
Thanks,
Steve.

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

I would like to uninstall my old CS5 Design Premium from my computer to reinstall it on another computer. What are the steps? Is there something special with the activation codes, etc?

You are allowed to have two activated installations, so if you prefer to you can keep ut on the current machine and just install it on the new one like you did originally. If you wish to eliminate it on the other machine, the first thing to do is to deactivate it by opening a program in the suite and selecting Help -> Deactivate in the top toolbar. That is all you need to do to disable the software. At this point if you prefer to you can uninstall it if you like.
As far as getting it on the new nmachine, as I just indicated, just install it like you did the first time.

Turning off new message indicator AND the new message count

Greetings,
Is it possible to turn off both the new message indicator (red asterix) and the new message count?
I would like no message indicators to appear on my blackberry home screen.
Thanks ever so much for your help.

I guess I didn't read close enough. I don't think you can turn off the red asterisk. It's going to show up on the icon no matter what.
As for the text messages, I'm not sure the setting for not showing message count indicator applies for text messges. In fact, if you have OS 5, it most likely doesn't as sms is handled much differently.
You can turn off sounds and the red led in Profiles (or Sounds in OS 5)
You're basically wanting to disabl everything the phone was designed to do.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Would RV80HGEN turn on the 'Active' indicator in VOFM

Similar Messages

Maybe you are looking for