Would the Sony KDL-46EX710 be a good match with ATV?

I'm about to buy a new television. The Sony KDL-46EX710 model appeals to me because, unlike most other 46 inch models from other manufacturers, the Sony's relatively low overall height allows it to fit nicely into the space I have available.
I also plan to buy an Apple TV and I want to make certain that the Sony is a smart choice.
My questions are:
1.) Will the Sony and the Apple TV work well together?
2.) Any advice or warnings I should be aware of before I pull the trigger?
Thanks very much.

larrybobba wrote:
1.) Will the Sony and the Apple TV work well together?
as long as it has an HDMI port and is at least 720p then there shouldn't be any issue.
2.) Any advice or warnings I should be aware of before I pull the trigger?
HDMI and at least 720p are the only things appletv needs.

Similar Messages

Would the P965 Neo-F make a good board in a student PC?

These are the components I had in mind for my sister's new PC:
Core 2 Duo E6300
MSI P965 Neo-F
2x1GB Kingston HyperX KHX6000D2K2 DDR2-750
Asus 7600GS passively cooled
430W Seasonic S12-430
Samsung 80GB HDD SATA
Samsung DVD Burner SATA
BenQ FP93VW
MS-Tech Midi Tower
She does game a little (Caesar 4 too, so the gfx must have a little juice), but mostly DVD watching, surfing the net, work stuff, encoding to MP3 and so on. Would the Neo-F be worth the extra money compared to the 50€ AsRock solutions?
Edit: Important question: Does the Neo have any other significant problems then with IDE optical drives? Since both the HDD and DVD Burner are SATA I dont expect any problems on this side.

Quote from: Streifenkarl on 28-December-06, 14:47:38
Thanks for your input guys. I think I'll stay with the Neo then! Which BIOS version should I use then? 1.5 or an earlier one for highest stability?
Use 1.5 if it works right. Seems BIOS has some issues as beta's are released quite often. That Asrock board wouln't be bad, if you get piece that isn't defect. My Asrock's AGP port was faulty which resulted burned GFX. If you are not using external (PCI/PCIe) hdd controllers you should not hit any problems with this board. I would not suggest flashing beta biosses if you dont have problems.
Jmicron controller might cause some problems, but they are fixable trought newest drivers I have heard. I am currently running some old beta driver with my 965 neo, as I have been too lazy to update to newest as they seem to work enought. I dont use much IDE drives anyway, only my raid1 backup set is IDE, other stuff is SCSI, which are bit problematic with this board.
2x 12v lines aren't good If you are using some heavy gfx card, if the rails aren't real powerfull. There was some nice postings on these forums about them. I would prefer PSU with really heavyduty one 12v rail. But if it works, dont do anything ofc.
Your set is almost like mine, tho I have e6400 and kingston valueram. Im not sure if the mobo keeps RAM at specified speed as I havent found any software that could see the ram clock. Well I can run 325 fsb stable with default voltage, so if the ram clock is not fixed to 333 my KVRs are just good pieces
Nice to see atlast powerfull cpu that can be cooled even with stock cooler when overclocked, tho I already installed my watercooling as all parts of my computer seems to work.

HT ALMOST A YEAR AGO . IT HAS ISIGHT SO I PRESSUME ITS A G5 PRO. I wouls like to change my existing printer with a good quality scanner an printer which would be an good match with my imac ?

Ihave imac 10.6.8 - i3 bought less than a year ago. It has isight so pressume its g5 procesor.
I would like quality scanner to add and think i may as well change my printer to scanner and printer combined. Canm anyone advise on bEST to go for. Thanks mqd

On the contrary, you have an intel processor, and it's not a G5 Pro, those are PPC and can't run Snow Leopard.
I have always had good luuck with Canon Multifunction machines, try one of those.

What printer scanner is a good match with IMac

Hi
So I have a brand new IMac OS 10.9.2.
I also have a brand new HP Officejet 6700 printer/scanner.
Printer works fine on wireless. The scanner however will not scan to the computer. Message on the IMac is that there is no document in the scanner. If I try to initiate the scan from the HP it does not list the IMac as an option to scan to. I can scan to a USB and copy from it. but this is for a small bussines and I cant be waisting my time with that.
I am happy to buy a new printer/scanner but I do not know which one is a good match.
I have been to three major stores and in each the sales person has been adiment that HP is the best. But they are not aware of the issue above. So I have asked them all to show me one working and they cannot get it to work. When I or they research the internet reviews & forums we get the same thing. There is a big issue out there with the HP scanners not seeing the IMac, but it would seem the sale people do not know about it. So how then do trust there opionion on other printer/scanners do they actually know that they will work.
I dont want to be messing around waisting valuable time re-programming either device or changing 20 odd settings to achieve nothing. I'm not particularly computer savvy. I just want to buy a printer/scanner, plug it in and use it and have it do what it says on the box.
So can someone who knows their stuff please advise me on a good economic printer/scanner that matches well to an IMac.
P.S I scan and print documents regularly not high quality photos

I'm using a Brothers MFC-J4610DW and it works very well with my Mac running 10.9.2. But it does not list the Mac as a Scan to device and that is because of Apple not the printer or the drivers, software. It is a OS X restriction.

Would the GS70 Stealth Pro-24 be good for a Mechanical Engineering student?

I will be attending college in the fall with the intention of studying mechanical engineering. I am looking for a good laptop and I was told to find something with a dedicated graphics card. The Stealth Pros seem like they could handle 3D design and other engineering software pretty well. Can anyone with an engineering background give me any advice? Thanks.

Quote from: CBerger02;107428
I will be attending college in the fall with the intention of studying mechanical engineering. I am looking for a good laptop and I was told to find something with a dedicated graphics card. The Stealth Pros seem like they could handle 3D design and other engineering software pretty well. Can anyone with an engineering background give me any advice? Thanks.
Hey CBerger02, I am an PLC programmer in which have a 4 year degree in elctro/mechanical technician and am 2 years away from my masters in electro/mechanical engineering. So I think I could answer your question right quick.
If you want something that's going to be the best for what you need, its really dependent of the software you going to be using. If its straight autocad and maya, you'd be better off with the msi workstation, gt60 with quadro 4100 gpu and 3k screen.
If you want something that will be all around good for most programs, not great in any specific but good in pretty much every one, then the gt70 with 880m 8gb gpu and intel i7 4810/4900. **This is the one I have, its the gt70 dominator pro 890.**
If your willing to sacrifice some rendering time, but add slim and easier on the portability side, then yes, the gs70 ghost pro would be a great option. It will run slightly warmer, and fans will be louder while maxing it out. But it offers superb specs for the space and weight provided.
Just make sure with the pro, that you get the x2 msata option or add your own. Most programs and rendering sessions will be cut into 20% of the time if you can read from and write to a ssd vs mechanical. But don't allow raid on the drives, just use the 2 msata as 2 individual drives. So youll have like c:/ d:/ with msata and then e:/ will be your mechanical.
Also the 870m will provide the best times for rendering sessions. Wont take away much battery as the 860m in the msi's is the keplar not Maxwell. But the extra cores/shaders/vram will help you out.

Would the retina 15 inch be a good laptop for 3D animation and design?

Being a student, a laptop is the best for me being as I'm never at my apartment to use a desktop. It would be maxed out with ram. I want a laptop that can run 3DS Max and Photoshop at the same time and not feel sluggish. If its not possible with this machine please let me know and any advice on what to get is much appriciated.

If your prime purpose is a computer for "new game development programs and graphic rendering programs ...", a notebook, be it an Apple or a Windows machine, should not be considered. A high performance desktop for the same amount of money will outperform any notebook.
I do not play games, but logic leads me to believe that you should equip yourself with hardware that is similar to what the high end game aficionados use. Only that way you can develop game applications and determine if they will meet the users needs.
A notebook/laptop by its very nature compromises performance for size and portability. If there are other reasons that you find compelling to buy an Apple that's fine. I have bought two MBPs and my next notebook will also be a MBP. I endorse Apple MBPs and appreciate thier virtues, but I also recognize their shortcomings.
Ciao.

Our IPAD was stolen and was probably not registered. If it had been synched to itunes. Would the registration info be in itunes and or with apple?

IPAD wasa stolen. It was the original version. Probably at least 3 years old. If synced with itunes would it have the serial number etc? If apps were bought through apple would they have original information such as serial number etc.

If it had been synced to your computer's iTunes then you should be able to find it's serial number from there : http://support.apple.com/kb/HT4061 :
Open iTunes.
Open Preferences. (In Mac OS X, choose iTunes > Preferences. In Windows, choose Edit > Preferences.)
Click the Devices tab.
Position the mouse over a backup to display the serial number of the backed-up device. iPhone and cellular iPad models also display the IMEI/MEID and Cellular Data Number
If it's been stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

At what point would the CS6 suite no longer be (seamlessly) compatible with CC suite/applications?

I have the CS6 on my office computer and CC installed at home. I want to remove a few CC applications I inadvertently installed on office computer to free-up space. I am; however, concerned that as CC updates on my home computer, I'll be forced to save to compatible file types, e.g. IDML for InDesign. Moreover, I've been using the CC software (e.g. Adobe InDesign CC vs. Adobe InDesign CS6) at the office and wonder if there will be compatibility issues once CC is gone and I return to using CS6. While I could remove the entire CS6 suite and just use CC on office computer, I would rather have the additional CC install for a personal computer since I'm paying for the subscription and my company paid for CS6. Any thoughts/suggestions would be greatly appreciated. Thank you.

There is no single answer... any answer is specific to the individual program
For instance... a Premiere Pro CC project file is not backwards compatible with Premiere Pro CS6
You will need to ask in the individual forums
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Love the new FrontRow 2.0 not so much with ATV version

I took the ATV plunge on Friday when I purchased Leopard. Installing Leopard first, I was surprised by the support of Events in the new Front Row. Now that I've got my 40GB ATV streaming I'd really like to view my photos via Events. Any idea when Apple will be updating this feature?

Yes, it would be extremely nice if the AppleTV software were to be upgraded to the level of functionality as Front Row 2, especially with native playback of VIDEO_TS folders in FR2. I really, really hope Apple updates the AppleTV very soon...

The songs on my ipod don't match with the right letter? Help?

So recently I went to go listen to my music on my ipod and my music doesn't sort right. It doesn't match up with right letters. Here are a few screenshots just in case you don't know what I mean:
I don't know how to fix this. I tried deleting my music and putting them back on but it was still like this. Anyone know what to do?

Wow, that's weird!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I'm trying to update my debit card information but it shows that the information i put in does not match with my bank record.

Hi,
I replaced my old debit card with a new one. I tried to update my debit card number information. I'm pretty sure I put everything right but it showed that my credit card information does not match my bank's records. The bank has already verified my card is activated.

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
iTunes Store Accepted Forms of Payment
http://support.apple.com/kb/HT5552
 Cheers, Tom

HT202157 my apple tv won't activate with sony kdl-40hx701

i cant activate apple tv with the sony kdl-40hx701

Does it start up ok or do you mean you get no video at all?
If just black screen then
Check these troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.

The cursor on my iMac freezes, and I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard ... it is internal. How do I fix this??

The cursor on my iMac (Panther 10.3.9) freezes to where I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard. How do I solve this problem?

ClassicII wrote:
Sorry to say but your imac g5 logic board has bad caps. This was a problem apple had and issued a out of warentee fix but that has now expired.
The cost to get this repaired is more than what you could find another used imac for.
I would suggest you get some details before you rush to make a diagnosis. You have absolutely no information to base this on. I see you're hitting up on numerous threads all over the place. Quality, meaning several good posts with reliable advice, is much more worthwhile than quantity.

SAP format is not matching with the bank format

Hello,
I have created an invoice for a specific vendor and run the transaction F110 ,created a proposal and carried out a payment run.
Later when I go to Environment --> Payment Medium --> DME Administration and choose one item and try to display it, the data
medium contents are being displayed correctly.But the displayed Data medium contents are not matching with the bank format
for which the payment transaction has been made.
Would request you to suggest the changes to be made either in DME or the corresponding ABAP code for making the Data
medium contents match with the bank format.
Regards,
Vineela.
Edited by: Vineela S on Jul 27, 2011 8:24 PM

Hi Kumar,
There could be three reasons.
1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
Hope this will help you. If not clear please reply, I will explain you.
Pl. assign points if useful.
Thanks

Pick and Pack / Goods Issue with Multi Batch Pickup

Dear Friends,
Can anyone explain me the process of Pick and Pack / Goods Issue with Multi Batch Pickup.
Harsh

Hi Mathur,
Please refer these links on working with batch splits in deliveries :
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm">Batch split</a>
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm">Executing Multi batch</a>
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm">Transferring Batch Data from Deliveries into Warehouse Management</a>
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Would the Sony KDL-46EX710 be a good match with ATV?

Similar Messages

Maybe you are looking for