Would there be any impact on MP functionality in a MUI enviornment

I am validating my MP on the latest version of System Center. Wanted to know if the OS has MUI enabled, would there be any impact on the MP functionality given that System Center strings are English only irrespective of the whatever the languages
is set using the MUI.

Hi, no impact on functionality
http://technet.microsoft.com/en-us/library/hh457558.aspx
http://msdn.microsoft.com/en-us/library/ee533664.aspx

Similar Messages

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

Would there b any problme on storing too much varibales in Session variable

How many maximum number of attributes i can store in Session ? Would there be any kind of problem ?

The limit depends on Integer.MAX_VALUE and the JVM memory available. Just profile your webapp to see if it doesn´t eat too much memory.
That said, how much is "much"? In a decent webapplication you normally don´t need to worry about it. Are you sure that your webapplication is properly designed? Consult your project architect/lead.

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

Hey i got my ipod 4g touch broken so now im planning to replace its lcd glass as they both come jointly.....let me know if i do so then would there be any difference in the touch of the device...?

Hey i got my ipod 4g touch broken so now im planning to replace its lcd glass as they both come jointly.....let me know if i do so then would there be any difference in the touch of the device...?

If you use a legitimate replacement part it should work fine

If I bought an iMac from America would there be any differences/problems?

I live in Australia. If I bought an iMac from America would there be any differences/problems with me using it in Australia & connecting it to other Apple products (that were purchased in Australia)?

For that matter, you will receive cables which are incompatible with Australian electrical mains outlets.
Therefore, you will need a plug adapter.
You should also check with Customs for duties and import regulations and restrictions.
In my country, for example, all electrical devices imported from outside the EU are subject to duties and VAT and, if they are radios, TVs or any comparable device (and an internet-enabled PC is considered comparable), they must also be approved by the Department of Communications for compliance to radio frequency standards. In some rare cases, approval may be denied, most of the time it costs a very high fee.

I set up Icloud, now when I try to listen to a song on my ipone 5s it asks me if I want to "download over cellular"? and additional fees may apply. I've already bought this music, why would there be any more fees?

I bought my first Iphone - the Iphone S about a month ago. I was able to listen to music no problem. I recently figured out how to get my photos off of my phone and on to my PC, but was prompted to sign up for ICloud to do it. Now when I try to listen to music on my phone, it asks me to download it from Icloud and asks "download over cellular"? "Additional fees may apply when downloading phones over cellular". I've already bought all my music, why would there be more fees and shouldn't ICloud have mentioned this? Seems I need to take a class just to figure all this out.

The clouds you see next to your music on the device and iCloud are two different things. When your music is not on your device it is in iTunes in the Cloud. Not the same thing as iCloud which is used to sync information between devices and house backups of your device contents. So that little cloud you see next to your songs is telling you that the music is not on your device. That's why it is giving you the message - because when you click on it, it is attempting to download it to your device.
What may have happened is when you imported your photos to the PC, you may have sync'd your device via iTunes, and you did not have the Sync Music option checked in your device Profile screen.
Hook up your device to your PC and open iTunes. Make sure the sidebar is showing (Control+S if you cannot see the sidebar with Devices listed), and click on your device to open the Device Profile screens to the right. Click on the Music tab, and make sure that the Sync All Music or Sync Selected Music box is checked. If you have Sync Selected Music checked, then below that, make sure you check all music that you want on your device. Then click on SYNC at the bottom (or APPLY).
Once you have successfully sync'd your music to your device, you will no longer see the cloud next to the songs, and you also will no longer get a message since you will have the songs physically on your device and not in iTunes in the Cloud.
Cheers,
GB

Will there be any impact for OSD when upgrading ADK/MDT/R2?

We’re planning to upgrade our production ConfigMgr environment so that we can deploy Server 2012 and Windows 8.1.
Currently we have ConfigMgr 2012 SP1 CU3 with MDT 2012 Update 1 and Windows ADK 8.0. We have one Primary site and several secondaries.
My understanding is that I need to do the following:
Upgrade Windows ADK 8.0 to 8.1 (uninstall 8.0, install 8.1 on our Primary site)
Upgrade MDT 2012 U1 to MDT 2013 on our Primary site
Install ConfigMgr 2012 R2 on our Primary site
My primary concern with this upgrade is that we are in the middle of our Windows XP to 7 migration.
I am using an MDT 2012 U1 integrated deployment task sequence including the MDT 2012 toolkit, settings, USMT, and MDT database.
I am looking for feedback/links/resources/horror stories from others who have already been through this.
I would like to minimize OS deployment downtime and plan accordingly for outages.
Here are some concerns that I have:
Will uninstalling/reinstalling ADK have any effect on my existing production task sequence deployments?
They use a USMT 5 package from ADK 8.0
Will upgrading MDT from 2012 U1 to 2013 have any effect on my existing deployment task sequence toolkit, settings, boot image packages etc…
Are there any “gotchas” with the R2 upgrade that will impact my existing deployment task sequences or any ConfigMgr 2012 components (app deployment, software updates etc...)?
Any advice or links are appreciated. Thanks in advance!
-FP

We were in a similar boat, XP->Win7 migration and needed to do our R2 upgrade. We postponed the upgrade until just a month or two ago, and for good reason.
We found alot of issues with OSD, but have been able to resolve them fairly quickly.
WinPE 4.0 boot images must be rebuilt as WinPE 5.0 (this was expected)
Our WinPE 5.0 boot image could not contact the MP because of our HTTPS MPs in the DMZ. Had to stand up internal HTTPS MPs so boot clients could download Task Sequence policy.
All task sequences had to be recreated (we integrate with MDT and 1E Nomad) (this was also expected)
We are still fighting through our issues, but our biggest one just arose last week. Our OS images need rebuilt. We only have three, but we are going through that process now.
Microsoft has not confirmed the upgrade caused the OS image issues, but they recommend we rebuild to be safe.
The symptoms we saw were IE errors, desktop profile errors, DISM errors loading drivers, and black screen/white cursor hangs during Windows Setup. All issues were intermittent, one machine would build fine, another wouldnt.
I dont know what we messed up or configured that caused all this trouble, but the R2 upgrade was the trigger that caused it all to break.
Personally, I would definitely wait until your Win7 migration is complete, unless you can risk the possibility of having to rebuild everything if things go awry.
Daniel Ratliff | http://www.PotentEngineer.com

My ipod has lines all over the screen and would there be any way to get that fixed?

My I pod touch has lines all over the screen and I was wondering if there would be any way to get that fixed?

Try the standard fixes to rule out a hardware problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If stil problem you very likely have a hardware problem.
Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place may be less expensive. Here is one.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Would there be any reason for a hotspot created in InDesign to change size when exported as a SWF?

Hello
I've got a 280-page InDesign (CS5) document with invisible buttons/ hotspots throughout which I want to export as a SWF.
Once exported, the buttons/ hotspots appear to be sized/ positioned correctly on the first dozen or so pages. Afterwards, the hotspots are consistently sized and positioned incorrectly over the buttons; so that if you were to try and click on the button, you wouldn't actually be clicking on the hotspot at all.
Things I've tried so far:
Exporting the pages in smaller batches, rather than as a single 280-page file
Export the SWF at different sizes
Checking that the hotspost don't have any blank areas inside their boxes (in the same way you can move an image inside a picture box and have blank areas)
I've hit a wall with this – any help/ suggestions you're able to offer would be very much appreciated.
Thanks for your time.

Thanks, but I have searched here but have not found or heard a direct answer to my question as stated above...

Would there be any reason for logs to show up in the activity terminal while a computer is not in use?

I have an activity log on my mac from Dec. 7th, at 12:48pm-12:49pm...no one was anywhere near the mac at the time, as we were all downstairs having tea with family. Is it possible for the log to happen without anyone accessing the computer? it was the admin account only...the other two accounts show nothing on the log. The other thing of concern, is that this popped up with it: device_generate_desktop_screenshot.
Is something taking screenshots of my mac? I would paste the full code, but I freaked myself out already, so the mac is off for the night and the wifi is turned off on the mac, as well. Last thing, is that my fully charged mac was so dead it wouldn't boot on Sunday evening, and I hadn't touched it since Friday...is that related?
thanks.

But when I do this, none of the express units show up in the utility anymore. Should I just take it as a blessing that it seems to be working, and not mess with it?
Did you power cycle the entire network to get things in proper sequence?
If not, power off everything....all devices....order is not important
Wait a few minutes
Power up the modem first and let it run a moment or two
Power up the Time Capsule the same way
Power up the powerline devices
Power up each Express one at a time
Power up other devices one at at time
What should the internet setting be on the time capsule and airport expresses.
The setting on the Time Capsule will depend on the type of modem that you have connected. It sounds like the "Share a public IP address" would be correct for the Time Capsule. Everything else must be in "Bridge Mode"
Each of the AirPort Express devices must be configured to "Create a wireless network" using the same wireless network name, security setting and password as the Time Capsule network. Set the Channels as "Automatic" and double check as the last configuration step to make sure that they are set for Bridge Mode.
Then restart the entire network as outlined above and you are in business.
The Express devices should definitely show up in AirPort Utility when you have everything set up.

Would there be any issues if I create some 600 keywords in LR?

Im trying to find a way to store the original final name (from before import/copy of pictures in old pre-Lightroom folder structure to new folder structure).   There doesnt seem to be a metadata field for 'source folder', so it seems the best I can do is manually set a keyword along the lines of   OrigPath=E...\Nikon\folder
The catch is my current photo library is spread over about 500+ folders.
One issue I can see is that they will take up a lot of space in the keyword list which might make it harder to use the dropdown etc for setting other keywords
Im using keywords as they can be directly editied in Windows Explorer Properties etc (as 'tags').
Is there a better way?

Ok, step by step.
The current folder structure is haphazard. Likewise file names which include duplicates (for many reasons, multiple cameras with similar numbering, folder partial duplicates for making albums for distribution etc). Some 12,000 files accumulated over 10 years or so.
And now I'm starting with Lightroom. I think I've figured out a workflow going forward ... Thank you DAM book!
So, first assumption... It's a good idea to import/copy the old library into the new folder structure.   Is that a bad idea? As opposed to basically running two libraries which will complicate archival and backup.
The file names are changing to ensure uniqueness in the new folder structure.
old1\a.jpg.    and. old2\a.jpg. may both be copied to new17\....    or whatever.
(And also, consistency with the new file name convention).
Second, a point of principle. I hate discarding information. Some of the old folder names signify 'collections', though most dont. So filtering on some of the old folder names will help categorization in lightroom.    As opposed to starting over.
Third, can I be sure I will never need to locate the original file?
Windows Exploder... fair question. Basically I'm still easing into LR and need training wheels. Albeit limited ones as Exploder doesn't read RAW metadata. (But 80% of the old files are JPG ).
So....
First, what is the appropriate metadata field for this?   Exif.ImageID sounds plausible. Is that right?
Second, is there a way to automatically populate that field on import?
At this point, this is where I'm at... (Lacking answers to these questions and based on the little I know so far)....
Import/Add the old library into LR using a temp catalog, setting a keyword (PreLR)
In LR, folder by folder, (yuk) set a keyword "under" PreLR with the folder name.
This is where the 500+ keywords comes in.
Using hierarchical keyword is a way to hide them when needed (most of the time, going forward, I hope!).
Write the metadata back to files/sidecars.
Reopen main catalog.
Import/copy to new folder/ filename structure.
Archive old library offline and delete.
Sent from my iPad

I have my app store account registered in UAE region.. Can i change region to US?? And would it make any impact on my past purchases????

Guys please help me..

If you are physically located inside the borders of the U.S and have a credit card issued by a U.S. bank and have an valide U.S billing address ont eh credit card, tehn you can change the country.
I do not believe that you will be able to update or redownload any purchases made from another country once you have changed countries.

Would there be any noticeable difference between the following system memories?

64GB (8 x 8GB) , PC4-17000, 2133MHz (G.SKILL - x99)
64GB (8 x 8GB) , PC4-21300, 2666MHz (G.SKILL - x99)
If I used Pr and Ae on a regular basis, would one of those cards offer a significant advantage over the other? I've read about them but I'm still not sure; I want your opinions.

When you say that it's not a recommended configuration, which of these three are you referring to?
The setup in the picture above? (In Bill Gehrke's Post)
64GB (8 x 8GB) , PC4-17000, 2133MHz (G.SKILL - x99)
or the
64GB (8 x 8GB) , PC4-21300, 2666MHz (G.SKILL - x99)?

Okay my iPod touch 4th generation will not sync. I reinstalled iTunes . Can someone please tell me what to do?!?!?! Oh would there be any chance that me letting my friend use my sync cord could've messed it up???

I need some help. I want to sync my iPod touch 4th generation and it WILL NOT sync. I reinstalled iTunes and it still won't sync. I also let my friend use my sync cord, could that have anything to do with my problem?? I really need some help. So please answer me back if you know what could be wrong.

Could be the cable. Have you tried:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Would there be any impact on MP functionality in a MUI enviornment

Similar Messages

Maybe you are looking for