Would there be any reason for logs to show up in the activity terminal while a computer is not in use?

I have an activity log on my mac from Dec. 7th, at 12:48pm-12:49pm...no one was anywhere near the mac at the time, as we were all downstairs having tea with family. Is it possible for the log to happen without anyone accessing the computer? it was the admin account only...the other two accounts show nothing on the log. The other thing of concern, is that this popped up with it: device_generate_desktop_screenshot.
Is something taking screenshots of my mac? I would paste the full code, but I freaked myself out already, so the mac is off for the night and the wifi is turned off on the mac, as well. Last thing, is that my fully charged mac was so dead it wouldn't boot on Sunday evening, and I hadn't touched it since Friday...is that related?
thanks.

But when I do this, none of the express units show up in the utility anymore. Should I just take it as a blessing that it seems to be working, and not mess with it?
Did you power cycle the entire network to get things in proper sequence?
If not, power off everything....all devices....order is not important
Wait a few minutes
Power up the modem first and let it run a moment or two
Power up the Time Capsule the same way
Power up the powerline devices
Power up each Express one at a time
Power up other devices one at at time
What should the internet setting be on the time capsule and airport expresses.
The setting on the Time Capsule will depend on the type of modem that you have connected. It sounds like the "Share a public IP address" would be correct for the Time Capsule. Everything else must be in "Bridge Mode"
Each of the AirPort Express devices must be configured to "Create a wireless network" using the same wireless network name, security setting and password as the Time Capsule network. Set the Channels as "Automatic" and double check as the last configuration step to make sure that they are set for Bridge Mode.
Then restart the entire network as outlined above and you are in business.
The Express devices should definitely show up in AirPort Utility when you have everything set up.

Similar Messages

Would there be any reason for a hotspot created in InDesign to change size when exported as a SWF?

Hello
I've got a 280-page InDesign (CS5) document with invisible buttons/ hotspots throughout which I want to export as a SWF.
Once exported, the buttons/ hotspots appear to be sized/ positioned correctly on the first dozen or so pages. Afterwards, the hotspots are consistently sized and positioned incorrectly over the buttons; so that if you were to try and click on the button, you wouldn't actually be clicking on the hotspot at all.
Things I've tried so far:
Exporting the pages in smaller batches, rather than as a single 280-page file
Export the SWF at different sizes
Checking that the hotspost don't have any blank areas inside their boxes (in the same way you can move an image inside a picture box and have blank areas)
I've hit a wall with this – any help/ suggestions you're able to offer would be very much appreciated.
Thanks for your time.

Thanks, but I have searched here but have not found or heard a direct answer to my question as stated above...

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?

If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.

HT201302 Would there be any need for drivers in Windows 8.1 so that the Iphone 5 can show up on the computer device view?

Apple Iphone 5 transfer to and from computer on a Windows 8.1 64 bit machine? Do I need to download a driver so that the computer will recognize the device?

Hi,
For Visual Basic 6 questions, read the post at the following address
http://social.msdn.microsoft.com/Forums/en-US/vbgeneral/thread/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Kate Li
TechNet Community Support

I upgrade my system to Mavarics. When I get register for icloud Sri Lanka not there? any reason?

I just installed Mavaricks OS. Then I was run iCloud in Mavaricks. So when I'm going to install 'find my mac', country code Sri Lanka not there? any reason for that?

when you go to icloud you will not see pictures it is normal. Check that out to see what photostream does.
iCloud: Photo Stream FAQ - Support - Apple

HT1386 i can't sync some selected movies i bought in iTunes store. any reason for this please/

I can't sync some selected movies i bought in iTunes store. Any reason for this and help please?

I assume they are, but I am not completely certain. I purchased the songs from iTunes, so I would be surprised if they are in a format that is not playable by the Touch.
How do I check whether the format is playable?
Thanks,

Does anyone have any suggestions for password protecting e-mail on the i pad?

Does anyone have any suggestions for password protecting e-mail on the i pad? Other people sometimes want to use my i pad but I don't want them to have access to my e-mail (which is on AOL)
Presently you can password protect the whole i pad by having to put in a 4 digit code to open it, but once it's open whoever is using it has access to everything you have on it.

Skydiver...that did it!! I shut the mail app from automatically opening and now I can sign onto my AOL acct. through Safari!! I had called Apple Care and had asked different peope in Apple stores about this and no one but you had any suggestions! YAY!! Thanks!!!

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in. Pls advise. Tq

Reset the device, restart the device, try downloading any other app.
All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.

Play count question. I have about 500 songs in my library that I know have played at least once...probably just once. Although there is a "last played" date listed there is no number in the play count column. Any reason for this? thx

I have about 500 songs in my library that have played one time. Although a "last date played" date is noted, there is no number in the play count column. This only happens some times. Any reason for this, and can it be corrected? thx

Thanks, but the play count is not incrementing only on the very first play. All subsequent plays are fine. Meaning the play counts for these particular tracks are always one play short. I double-checked some of the tracks in question and I have not shortened, or stopped them early.

Animated zoom in CS5 - any reason for it?

in CS5 the zoom function is much different than CS3 - very distracting. i have the animated zoom checked off but open GL on basic with anti-alias paths off so i can see the pen tool. Is there any reason for this new zoom? i dont see the point and its just annoying - not trying to be a complainer but just wondering why its there. Thanks.

not sure what you mean by interactivly but when i zoom by command + and - it gives me this jerky zoom action. not smooth to me. is this necessary b/c of open GL? i would turn it off b/c i dont use flick panning etc but i need to see my paths

There's no reason for secrets (Free Code)

I just wanted to say that I dont think there is anything wrong with copying code. You can learn so much from studying the completed puzzle enabling you to develop you conceptual foot hold in the language your learning and show you techniques in practice rather than in some vague text book abstraction that reveals no practical application that would help a beginner see it's value as a problem solving technique. Like studying a composition of Mozart or Chopin. There is so much to learn from seeing the completed formula and all the modularized mechanics that make up its functionality. I think that people who get hung up on revealing code are hiding their tricks. However, I do realize that some code must be private to serve its marketing agenda. Shool problems though? Come on. Who says you don't learn by looking at the answer? If that were the case, why ever look in a dictionary or any other resource for knowledge. Code is to be shared when it comes to learning. Anything else is just holding out for the sake of a selfish hording of knowledge. There's no reason for secrets.

I'd say 90% of developers agree with that - however,
Not every1 is a developer, other unskilled ppl,
(for the sake of simplicity, i'll call them 'publishers' :P)
exist to exploit the work of others, with the sole aim of maximizing profit.
which do YOU value more, knowledge or wealth?
(hmm - interesting catch 22 there...
to gain knowledge, you need wealth
to generate wealth, you need knowledge ;p)

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

Is there any way to log web traffic information of the users with RV082 router ?

Dear all,
I just bought a RV082 router. I can't find any way for logging the web traffic of the users.
Can it be done with the router ?
Thanks
Fabio

Hello,
If I am not mistaking the best you can do is to send syslog traffic to a server or locally (to a server being preferred) .
But you are going to see stuff like this:
30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2101->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2102->81.0.235.240:80 on ppp0) [0,0]
<30>Aug 3 22:12:40 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2103->81.0.235.251:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2104->212.5.219.46:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2105->81.0.235.250:80 on ppp0) [0,0]
<30>Aug 3 22:12:41 2005 gw RGFW-OUT: ACCEPT (TCP 192.168.1.111:2106->212.5.219.46:80 on ppp0) [0,0]
You will need an external device to make this happen, Having a proxy server such as Squid would do it for you and not just that but will optimize the newtork :)
Regards,
Jcarvaja
CCIE 42930

Iphone alarm doesn't work when the phone is charging but works fine when it is not plugged in, any reason for this?

Recently my alarm hasn't been going off on my phone when it is plugged into the charger. This is a problem as i have work most mornings and have been late. When it is not plugged in the alarm works. I know it would mae sense to charge it before i go to sleep, take it off the charger, set the alarm then wake up but was just wondering if there was any reason why I might be experiencing this issue?
Cheers

This is something peculiar, normally that doesn't work that way
when did this happen? if it just happened, then something probably went wrong with either the software or the hardware
do charge the proper way, and see if it happens again
or try completely draining the battery, and charge it to 100% and see if its gonna solve the issue with the alarm

If SIRI works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question

if SIRI application works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question. my iphone 4 are already update for iOS 5. I'm searching in the internet forum some are saying that it's only work if your iphone are jelbreak, and the problem is i don't want my iphone to be jelbreak. thanks for reading my question. and please send the question on my email many thanks....
<Email Edited by Host>

What else is there? There's Siri, A5 chip, 8MP camera, intelligent switching between antennas. Those are the only new things in the 4S. Like I said, if Siri was on the 4, fewer would buy the 4S. Second, the 4 is discontinued to make room for the 4S, so there will be no updates exclusively for the 4. Third, I never trust any reports on the Internet unless it comes directly from the company (in this case, Apple).

Would there be any reason for logs to show up in the activity terminal while a computer is not in use?

Similar Messages

Maybe you are looking for