Would this connection scenario work for sharing a printer?

I work from home and my HP LaserJet is on it's last leg. My office computer is a an old Dell Optiplex - no wireless capabilities and my computer locks the PC down quite well so even installing a USB dongle would be out of the question. Hence my question.
I was thinking of buying the Airport Extreme plugging my Samsung SCX-4500 into the Airport. The Airport would be plugged into my DSL router which the office PC is also. Would I be able to use the Samsung from the PC even though the PC is not wireless?
I know my iMac would be able to get to it but I don't want to spend the money for the Airport as my HG2700-D has wireless built in.

Would I be able to use the Samsung from the PC even though the PC is not wireless?
Yes a scenario like that is possible as long as you configure the AirPort Extreme base station (AEBS) so that it acts as a bridge or the PC is connected to one of the AEBS's LAN ports.

Similar Messages

Photos tells me it is connecting to Library for shared photos. It's been saying this for about ten hours. I can't stop it from searching or get it to do anything else. I can go back to my photos but I can't get Photos to find the shared items.

Photos tells me it is connecting to Library for shared photos. It's been saying this for about ten hours. I can't stop it from searching or get it to do anything else. I can go back to my photos but I can't get Photos to find the shared items.

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

HT4108 I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine. I moved the TV disconnected cables to move now I can only get video and no sound back on TV. Any suggestions

I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine. I moved the TV disconnected cables to move now I can only get video and no sound back on TV. Any suggestions ?

No answer but marking as answered because I want to clear my unresolved questions.

TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

Will this Desktop computer work for WoW?

Hi I was just wondering if this computer will work for World of Warcraft. It's an
Acer Desktop Computer featuring AMD Athlon II X2 215 Processor (AX3400-E2202)
here's the pro
The Acer AX3400-E2202 desktop PC is built to fit just about anywhere. It's one-third the size of a conventional tower, but is loaded with powerful AMD II X2 performance, 4GB system memory and media features that allow you to power through demanding tasks. And with a 640GB hard drive, you've got plenty of room to store everything.
Product Features
Stay productive and get creative. AMD Athlon II X2 processing and 4GB DDR3 system memory make it a breeze to power through your everyday tasks. Explore the Internet, create documents, edit photos, and play with all of your media with ease.
Store hundreds of photos, songs and files on the 640GB hard drive
Watch DVD movies, listen to music CDs, and burn data to discs with the Super Multi drive
High-definition audio with 5.1-channel surround sound support, brings theater-like surround sound in the home
Front and rear access audio jacks speed up connection of headphones, microphones and other audio peripherals
Quickly transfer files using the 9 USB ports or 9-in-1 media card reader
Pre-installed Windows 7 Home Premium offers a more robust and reliable PC experience than ever before
Here's the link for it to and please reply soon! http://www.bestbuy.ca/en-CA/product/acer-acer-desktop-computer-featuring-amd-athlon-ii-x2-215-proces...
Solved!
Go to Solution.

XFX ATI RADEON HD 4650 1GB DDR2 PCI Express Graphics Card
Model: HD-465X-ZDFR | SKU: 9254585
This graphics card features unified superscaler shader architecture and 1GB DDR2 memory for lush visuals and fluid motions displays.How do you plan to accelerate your life? Get help to choose the right ATI graphics card.
4.7 Read reviews (38)
Sale: $79.99
This one has been proven to work well in WoW. Contact your local best buy for installation quote.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

My ipad 1 for no apparent reason no longnet. Our home wireless connection is working for all other devices. Any clues?

My Ipad 1, for no apparent reason, no longer connects to the Internet. Our home wireless connection is working for all other devices.Any clues?

You can also try to reset your network settings on the iPad. Go to Setings>General>Reset>Reset Network Settings.
Good Luck!

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ

THIS IS WHAT WORKED FOR ME

For hours I tried clicking back and forth from something else in iTunes back to the "iPhone" hoping to reconnect; that didn't work it! After five hours of clicking back and forth (as other users suggested) I decided to browse the iTunes store and after I looked at everything "AS SOON" as I clicked "iPhone" it began to restore the back-up. So I guess Apple wants to see if you are interested in spending all your money with their enticing iPhone enhancement apps that should have came with the original iPhones in the first place before they let you finish your upgrade. Hope this works.
[Serious Post]

This is what worked for me:
I called 1-877-419-4500. I got a guy named Don.
I asked him to make sure the 'business' thing wasn't on my account. It wasn't.
We reset the phone. (Hold home button and sleep/wake button) nothing.
He said he was going to get a hold of someone in the 'technical activation dept'. He did.
They found a 'glitch' on my account. Seems the activation was placed on hold. they took that off.
turned off my phone, plugged it into usb cable, itunes got it, viola! activated.
call that number. talk directly to a human, no wait, no menus.

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs. This has always worked for me until now. I have not changed any settings

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs. This has always worked for me until now. As far as i know, i have not changed any settings. This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue. I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
The DND feature should not be a factor at all if you're sure it's turned off. I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears. Once the phone reboots, do a test to see if this has helped to resolve the issue.
If not, go to Settings > General > Reset > Reset Network Settings. Then, test it out again. Post back if neither of these solutions solve your issue.

Why would internal speakers only work for iTunes?, Why would internal speakers only work for iTunes?

Why would my internal speakers work for iTunes, but nothing else on the web?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

HT5037 I have downloaded and installed this tool, but it's still telling me I need to update. Any suggestions why this isn't working for me? I have a Macbook Pro.

I have downloaded and installed the iPhoto tool to update so my pictures transfer over, but it's still telling me I need to update. Any suggestions why this isn't working for me? I have a Macbook Pro.

You have to download and RUN the iPhoto library upgrade - then launch iPhoto - If you had iPhoto '08 or earlier (version 7.x.x) - the upgrade is installed in the utilities folder of your Applications folder
LN

Printer keeps dropping wireless connection after working for a while

My computer stops being able to communicate with the printer wirelessly even thought the printer says it is connected to the network and both the printer and computer are on the same network. What happens is I connect the printer to the network and print something from my computer. Then, after a short while, half an hour maybe, when the printer shows it is connected to the network, I try to print but my computer can't find the printer. The message say the printer cannot be found. If I go to the printer, and reconnect with the wireless connection wizard I can print. But after a short time, I won't be able to print again and have to do the wireless connection wizard again. Wireless direct is off. Don't know if that matters.

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and makes your router secure and hack proof.
Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual). This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this first if needed. More Wireless Printing help is here (Windows solution 4, static IP).
Verify in the printer that 'Auto Off/Sleep' is disabled. Use the Embedded Web Server (EWS) by going to the printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer Assistant, Printer Home Page (EWS). Also check your Printers Properties.
If the printer supports and has IPv6 enabled, turn off IPv6 in the printer.
If needed and you assigned a static IP address, try using 8.8.8.8 for the Preferred DNS server and 8.8.4.4 at the Alternate DNS server.
In the router: (Refer to your router manual for information)
Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
Set router to 20Mhz only, or 145Mbps depending on router.
Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your system now and helps with wireless connectivity (if you want to know why, search the web).
If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same, they must be different for all bands, even for any Guest networks.
SSID broadcast must be enabled.
Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
Power on printer and verify it reconnects to router.
Windows 7/8/8.1 Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

This is what worked for me to install 8.1 Pro on brand new rmbp late 2013 NO WORKAROUND

15 in rmbp, late 2013. Extrernal apple USB drive. USB key for bootcamp drivers. Brand new windows 8.1 pro full version from store. No Upgrade.
Used Bootcamp assistant to 1) save drivers to usb key 2) partition drive to two. Left usb key and drive connected.
Bootcamp assistant reboots mac, windows splash screen. Follow instructions including having to reformat the newly created partition which is usual. No bootcamp parttionn name is present but it should be obvious which is the OSX and Windows partition. Windows begins installing then fails. rmbP is stuck.
Restart nothing, just grey screen. Call apple care. Have to PRM, press on, hold command option P and R keys.Release when apple beep starts. Then it will boot back into OS-X
Boots into osx. Go to bootcamp assistant. Follow instructions and windows partition is removed to give a single OSX parttion. Reopen bootcamp assistant. Repartition. leave USB key and external drive attached. Restart and follow instructions as before. NO issues.
Note, the "almost ready" splash screen hangs for a long time.
Then bootcamp installer comes up. Build 5411.NVIDA driver installed etc. Auto resart after drivers installed. USB drive and key attached. WIndows splash screen. SUCCESSFULLY installed.
OI can also hold down option now on restart to sleect which OS to boot into . WORKS GREAT.
I suspect you have to do a PRM reset after first failure using bootcamp assistant to get it to install properly thereafter.
After I did this I was able to install fine using bootcamp installer in OS-X. No need for ANY work arounds.

This process worked for me on a new Mac Pro (early 2014) to get Windows 8.1 (not 8.0) installed, although I did make one slight change to the process: instead of following your advice at the point: "Restart and follow instructions as before", I instead restarted and used the windows partitioner dialog to 1) delete the bootcamp partition, and 2) create a new partition that was slightly smaller than the remaining available space (by about 1GB). The installer said it might need to create an additional small partition (which it did). I continued with the rest of the install process as you describe above. (Yes, it did take a long time to get past the "almost ready" part.)
Thank you very much for your post!

I purchased an iPod touch 5 64gb mint condition, it was working good but now I reset it and it's asking for the Apple ID of the original owner. Does anyone know how to bypass this so it works for me?

I purchased an iPod Touch 5 64gb mint condition, it was working great but I reset it and now it's asking me for an Apple Id. Problem is it want the original owners & not mine. I would have no problem contacting the person I bought it off of but I no longer have their information since when it worked I deleted the emails!
Does anyone know how to bypass this problem so that I can have the ipod work for me and my Apple ID?
I would even take it to Apple if they could fix it, would they? and what might that cost me?
Any suggestions would be great!!!!

Nope. Only the previous owner can do that. See:
iCloud: Find My iPhone Activation Lock in iOS 7

Would this connection scenario work for sharing a printer?

Similar Messages

Maybe you are looking for