Would this external HD be recomended for my MBP?

http://www.bestbuy.com/site/WesternDigital+-+My+Book+Studio+LX+2TB+External+FireWire+and+USB+2.0+HardDrive/9941284.p?id=1218198434013&skuId=9941284
it has the Firewire 800 cable, i believe thats the fastest way to transfer data/ video... am I correct? Do i need one with esata?

Yes, here are the instructions for iMovie, itunes and iPhoto:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov3ac6d42c.html
http://www.macworld.com/article/157240/2011/01/howtomove_itunes.html?lsrc=nl_mwweek_hcbstories
http://support.apple.com/kb/HT1229
Regards,
Captfred

Similar Messages

  • Would this be a good IMac for serious audio and video production?

    I am looking for a imac that is good for serious music recording in protools or cubase and serious HD video editing and effects with adobe premiere pro and after effects. I also need it to run good with the rest of the adobe products like photoshop, deamweaver, fireworks, flash, etc. I am a student. And this is what i have came up with. I have external HDs so 500gigs is not a problem with me.
    2.5GHz Quad-Core Intel Core i5
    8GB 1333MHz DDR3 SDRAM - 2x4GB
    500GB Serial ATA Drive
    AMD Radeon HD 6750M 512MB GDDR5
    Apple Magic Mouse
    Apple Wireless Keyboard (English) & User's Guide
    AppleCare Protection Plan for iMac - Auto-enroll
    Do you think this would be good for what i do?

    That would be a nice machine, espcially for the price (I am guessing you looking at the 21.5" iMac)

  • Firewire 800 External Hard Drive recomendations for recording

    Ok so I posted a week or so ago about a bad experience I had with a firewire 800 external drive. Anyway, Im sending it back and getting a refund but I wanted to confer with you guys about a good, but cheaper (under $100 please) firewire 800 drive thats good for recording to. This will be my recording HD. Can anyone recommend some for me? and shooting a link to a place that sells it would be appreciated! ..and the more recommendations the better

    Hi Veena, Welcome to Apple Discussions.
    And you've tried choosing the volume and pressing the "Mount " icon on the tool bar of Disk Utility?
    Have you shut down your Mac and disconnected your firewire cable from both ends and let it sit about ten minutes then reconnect and try. Also, it is important to disconnect the AC power to your Mac, this helps to reset the FireWire port(s).
    Do you have TTP or DW, both of which you could use to try to mount it.
    It is also possible that you have a bad cable or a bad port, do other FW devices work?
    -mj
    [email protected]

  • Would this external monitor setup work?

    I have purchased this (http://www.ebuyer.com/product/152744) 23 inch samsung with a resolution of 2048x1152 and am waiting for it to arrive.
    Will it work using the mini display port to DVI adapter at that resolution? Or will i have to purchase that stupid dual link (i hope not >.<)
    Any ideas or help will be appreciated, thanks.

    Thankyou mate
    Also, do you have any idea how it would look at 1920x1080?
    Because i know that resolution looks good at 23" anyway, (think of the 23 inch ACD) but reckon itd look okay because its not the native res?
    Many thanks for your previous answer.

  • Would this be a good idea for saving some space on 1st drive?

    I have sort of run out of space on my original drive
    until i can get more RAM so that it may stop spinning beach balls.. the space taken up is nowhere near the max, but it's obvious I need to speed it up a bit, asi can here the processor working overtime... (I have the stock 1GB, but I should be using 2GB to 4GB of RAM!)
    My new second drive is now where the backup of the first drive resides (YAY!)
    My question is, what should I do to put stuff from the first drive that is taking up so much space, onto the second drive?
    I was thinking this is the best way:
    1) Make an alias of each thing I can move temporaraily to the second drive.
    2) Place the aliases on the desktop instead of the actual files themselves.
    3) Make a folder for the actual files called:
    "Stuff i would rather keep on my desktop if i had enough RAM" and put them all in that folder.
    4) Move that folder to the second drive until i get more RAM.
    I am guessing the second drive is only active with RAM when i use it as the main desktop drive.
    Maybe there is a better way.. ? thank you

    Hi doofmaczemy,
    I just want to help clear some things up as you may be confused about what is happening on your computer.
    1. Are you short on hard disk space or RAM? You say the space taken up is nowhere near the max, so I wonder if what you really need is just more RAM.
    RAM is used by the computer to store information about currently running programs and the operating system. You don't necessarily use RAM directly as a user (ie to store files, etc).
    Hard Disk space is used by you directly to store all your files, programs and operating system. When you save a video file on your computer it is taking up Hard Disk space.
    2. If you have, say, over 10GB of Hard Disk space left you should be OK. You say you can hear the processor working overtime. The processor is actually silent in its operation. You are most likely hearing your Hard Disk reading and writing data. If it's making a lot of noise, this probably means you are swapping out RAM memory onto your Hard Disk due to low RAM. So this is a sign that, yes, you do need more RAM.
    3. All of your ideas 1 to 4 aren't very good at all. Using aliases is generally a bad plan for using files. What I would suggest is, if you really are short on Hard Disk space, finding out what is taking up all your space. There must be something. It'll most likely be music or video. Then, just move all that music or video on to your new drive.

  • I have just got my iPad2 and very pleased with it. I have a question regarding the monthly (recommended) battery full charge.  Should I let the battery completely die down to nothing at all or would this be bad for my iPad?

    I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge.  Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?

    It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

    Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

    This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
    I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

  • Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion or later:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

  • I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only with wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

    I want to get another 4s and use it not as a phone, but only as a video camera and editor and hook it up only to wifi. i would sync it to itunes so i can pay for apps and upload. would this work, or must it be connected to a phone carrier?

    Trust me when I say this coming from 20 years of experience.
    Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
    Download and install Carbon Copy Cloner, clone internal drive to external drive.
    Set a schedule to remind you to do it at least once a week, keep it near your charger.
    When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
    CCC will do the rest.
    If you want to boot from it, hold the option/alt and select it Startup Manager.
    I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
    It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
    Make as many clones as you want, keep them time seperated, off site etc. etc.
    Cables don't have network issues, clones can be verified in seconds merely by booting from them.
    Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
    Software problem? No sweat, boot of the clone and reverse clone your problems away.
    If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
    I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
    Most commonly used backup methods

  • I have an Imac G4 and would like to install USB adapter for wireless internet connectivty. Is this possible with my system ?

    I have an iMac G4 and I am wondering if i could connect it wirellesly to an existing router I have for a PC, using an internet USB adapter ? Would my system be compatible with such hardware ?

    Thanks RC for your reply.
    My router is a Netgear WGR614 v8. Not sure what the encryption is, but i wantto say 128 bit.
    Here's more info on the iiMac:
    The Apple iMac G4/1.0 17-Inch (Flat Panel) features a 1.0 GHz PowerPC 7445 (G4) processor with the AltiVec "Velocity Engine" vector processing unit and a 256k on-chip level 2 cache, 256 MB of RAM (266 MHz PC2100 DDR SDRAM), an 80.0 GB Ultra ATA/100 hard drive (7200 RPM), a tray-loading 4X "SuperDrive", NVIDIA GeForce4 MX graphics with 64 MB of DDR SDRAM (AGP 4X support), and support for AirPort Extreme (802.11g) and Bluetooth with optional cards.
    The internal components are housed in an attractive 10.6" half-sphere, ice white case with a chromed stainless steel neck that supports a 17" TFT Active Matrix LCD display. This model shipped with MacOS X 10.2 "Jaguar" (and cannot boot into MacOS 9), as well as an ice white Apple Pro Keyboard, Mouse, and Speakers. Unlike some earlier iMac models that are convection-cooled, the iMac "Flat Panel" series is cooled by a quiet internal fan.
    Introduction Date:
    February 4, 2003
    Discontinued Date:
    September 8, 2003
    Processor Speed:
    1.0 GHz
    Processor Type:
    PowerPC 7445 (G4)
    Details:
    The PowerPC G4 includes the AltiVec "Velocity Engine" vector processor.
    Processors:
    1
    Geekbench:
    539
    Processor Upgrade:
    Soldered
    FPU:
    Integrated
    System Bus Speed:
    133 MHz
    Cache Bus Speed:
    1.0 GHz (Built-in)
    ROM/Firmware Type:
    Open Firmware
    ROM/Firmware Size:
    1 MB
    L1 Cache:
    64k
    L2/L3 Cache:
    256k (on-chip)
    RAM Type:
    PC2100 DDR SDRAM
    Min. RAM Speed:
    266 MHz
    Details:
    This system uses 266 MHz PC2100 DDR SDRAM (2.5v) memory modules. Also see: How do you upgrade the RAM in the iMac G4 models? How much RAM of what type do these systems support?
    Standard RAM:
    256 MB
    Maximum RAM:
    2 GB*
    Details:
    *Apple reports that this model can support 1 GB of RAM. However, "unofficially" it can support 2 GB of RAM. Site sponsor Other World Computing sells iMac memory, as well as hard drives, accessories, and other upgrades. 
    Also see: Actual Max RAM of All G3 & Later Macs.
    Motherboard RAM:
    None
    RAM Slots:
    2*
    Video Card:
    GeForce4 MX
    VRAM Type:
    DDR SDRAM
    Details:
    Shipped with a "NVIDIA GeForce4 MX graphics processor with AGP 4X support". Also see: What type of video processor is provided by the iMac G4? Is it upgradable?
    Standard VRAM:
    64 MB
    Maximum VRAM:
    64 MB
    Built-in Display:
    17.0" TFT
    Native Resolution:
    1440x900
    Details:
    This model has a 17.0" TFT active matrix display with a native resolution of 1440x900. It also supports "1152 by 720, 1024 by 640, and 800 by 500 pixels at 16:10 aspect ratio; [and] 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio." Apple reports a "typical" brightness of 200 cd/m, contrast ratio of 300:1, and viewing angle of 120 degrees horizontal and 90 degrees vertical. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display repacement, keyboard replacement, a hard drive upgrade service, and more are provided.
    2nd Display Support:
    Mirroring Only*
    2nd Max. Resolution:
    1024x768*
    Details:
    Apple reports that this system has a "mini-VGA output port for video mirroring on [an] external display or projector (requires Apple VGA Display Adapter, sold separately)." and supports output resolutions of "640 by 480 pixels at 60 Hz, 800 by 600 pixels at 75 Hz, and 1024 by 768 pixels at 75 Hz". However, the hardware is capable of using an external display in dual or "extended desktop mode", Apple just blocked the capability in firmware to protect sales of more expensive Macs. Unsupported third-party hacks are available.
    Standard Hard Drive:
    80 GB (7200 RPM)
    Int. HD Interface:
    Ultra ATA/100
    Standard Optical:
    4X "SuperDrive"
    Standard Disk:
    None
    Details:
    Apple reports that the tray-loading DVD-R/CD-RW SuperDrive "writes DVD-R discs at 4x speed, reads DVDs at 8x speed, writes CD-R discs at 16x speed, writes CD-RW discs at 8x speed, [and] reads CDs at 32x speed." Also see: What are the capabilities of the optical drive provided by the iMac G4 models? How do you replace or upgrade the optical drive?
    Standard Modem:
    56k v.92
    Standard Ethernet:
    10/100Base-T
    Standard AirPort:
    802.11b/g (Optional)
    Standard Bluetooth:
    1.1 (Optional)
    USB Ports:
    3 (1.1)
    Firewire Ports:
    2 (400)
    Details:
    This system has three USB 1.1 ports (shared on two 12-Mbps controllers) and two Firewire "400" ports (eight watts shared). Apple advertised that this computer had five USB 1.1 ports, counting three on the system and two on the keyboard. Also see: Complete Ports.
    Expansion Slots:
    AP/BL
    Expansion Bays:
    None
    Details:
    This model has expansion slots for AirPort Extreme (802.11b/802.11g) and Bluetooth. 
    Site sponsor Blue Raven sells parts for this specific iMac including the logic board, LCD, keyboard, case parts, latches, hinges, adapters and more.
    Incl. Keyboard:
    Apple Pro Keyboard
    Incl. Input:
    Apple Pro Mouse
    Case Type:
    All-in-One
    Form Factor:
    iMac G4 17" Flat Panel
    Apple Order No:
    M8935LL/A
    Apple Subfamily:
    iMac 17" 1 GHz
    Apple Model No:
    M6498 (EMC N/A)
    Model ID:
    PowerMac6,1
    Details:
    Please note that these identifiers refer to more than one model. 
    Also see: All Macs with the M6498 Model Number, the N/A EMC Number, and the PowerMac6,1 Model Identifier. 
    For more about these identifiers and how to locate them on each Mac, please refer to EveryMac.com's Mac Identification section.
    Battery Type:
    3.6V Lithium
    Battery Life:
    N/A
    Pre-Installed MacOS:
    X 10.2.3
    Maximum MacOS:
    X 10.5.8
    MacOS 9 Support:
    Classic Mode Only*
    Windows Support:
    Emulation Only
    Details:
    *This model is capable of using MacOS 9 applications within the MacOS X "Classic" environment provided with MacOS X 10.4.11 "Tiger" and lower ("Classic" is not supported starting with MacOS X 10.5 "Leopard"). It cannot boot into MacOS 9.  Site sponsor OHS specializes in heavily upgraded Macs capable of running both MacOS X and MacOS 9 applications.
    Dimensions:
    13.03 x 16.7 x 10.6*
    Avg. Weight:
    22.8 lbs. (10.4 kg)
    Original Price:
    US$1799
    Est. Current Retail:
    US$250-US$400
    Details:
    Please note that on average the estimated current retail pricing of used systems is updated twice a year (please refer to the date on the bottom of the page for the date last updated). Photo Credit: Apple Computer.
    Does this additional info help ?
    Thanks again
    Jeff

  • Would like to know if this is correct disk configuration for 11.2.0.3

    Hello, please see the procedure below that I used to allow the grid infratstructure 11.2.0.3 oui to be able
    to recognize mY EMC San disks as candidate disks for use with ASM.
    we are using EMC powerpath for our multipathing as stated in the original problem description.I want to know if this is a fully supported method for
    configuring our san disks for use with oracle ASM becuase this is redhat 6 and we do not have the option to use the asmlib driver.Please note that I have
    been able to successfully install the gird infrastructure successfully for a 2 node RAC cluster at this point using this method.Please let me know if there
    any issue with configuring disks using this method.
    We have the following EMC devices which have been created in the /dev directory.I will be using device emcpowerd1 as my disk for the ASM diskgroup I will be
    creating for the ocr and voting device during grid install.
    [root@qlndlnxraccl01 grid]# cd /dev
    [root@qlndlnxraccl01 dev]# ls -l emc*
    crw-r--r--. 1 root root 10, 56 Aug 1 18:18 emcpower
    brw-rw----. 1 root disk 120, 0 Aug 1 19:48 emcpowera
    brw-rw----. 1 root disk 120, 1 Aug 1 18:18 emcpowera1
    brw-rw----. 1 root disk 120, 16 Aug 1 19:48 emcpowerb
    brw-rw----. 1 root disk 120, 17 Aug 1 18:18 emcpowerb1
    brw-rw----. 1 root disk 120, 32 Aug 1 19:48 emcpowerc
    brw-rw----. 1 root disk 120, 33 Aug 1 18:18 emcpowerc1
    brw-rw----. 1 root disk 120, 48 Aug 1 19:48 emcpowerd
    brw-rw----. 1 root disk 120, 49 Aug 1 18:54 emcpowerd1
    brw-rw----. 1 root disk 120, 64 Aug 1 19:48 emcpowere
    brw-rw----. 1 root disk 120, 65 Aug 1 18:18 emcpowere1
    brw-rw----. 1 root disk 120, 80 Aug 1 19:48 emcpowerf
    brw-rw----. 1 root disk 120, 81 Aug 1 18:18 emcpowerf1
    brw-rw----. 1 root disk 120, 96 Aug 1 19:48 emcpowerg
    brw-rw----. 1 root disk 120, 97 Aug 1 18:18 emcpowerg1
    brw-rw----. 1 root disk 120, 112 Aug 1 19:48 emcpowerh
    brw-rw----. 1 root disk 120, 113 Aug 1 18:18 emcpowerh1
    As you can see the permissions by default are root:disk and this will be set at boot time.These permissions do not allow the Grid Infrastructure to recognize
    the devices as candidates for use with ASM so I have to add udev rules to assign new names and permissions during boot time.
    Step 1. Use the scsi_id command to get the unique scsi id for the device as follows.
    [root@qlndlnxraccl01 dev]# scsi_id whitelisted replace-whitespace --device=/dev/emcpowerd1
    360000970000192604642533030434143
    Step 2. Create the file /etc/udev/rules.d/99-oracle-asmdevices.rules
    Step 3. With the scsi_id that was obtained for the device in step 1 you need to create a new rule for that device in the /etc/udev/rules.d/99-oracle-
    asmdevices.rules file. Here is what the rule for that one device looks like.
    KERNEL=="sd*1" SUBSYSTEM=="block",PROGRAM="/sbin/scsi_id --whitelisted --replace-whitespace /dev/$name",RESULT=="360000970000192604642533030434143",NAME="asm
    crsd1",OWNER="grid",GROUP="asmadmin",MODE="0660"
    ( you will need to create a new rule for each device that you plan to use as a candidate disk for use with oracle ASM).
    Step 4. Reboot the host for the new udev rule to take affect and then verify that the new device entry will be added into the /dev directory with the
    specified name, ownership and permissions that are required for use with ASM once the host is back online.
    Note: You will need to replicate/copy the /etc/udev/rules.d/99-oracle-asmdevices.rules file to all nodes in the cluster and restart them for the changes to
    be in place so that all nodes can see the new udev device name in the /dev directory on each respective node.
    You should now see the following device on the host.
    [root@qlndlnxraccl01 rules.d]# cd /dev
    [root@qlndlnxraccl01 dev]# ls -l asm*
    brw-rw----. 1 grid asmadmin 65, 241 Aug 2 10:10 asmcrsd1
    Step 5. Now when you are running the oui installer for the grid installation when you get to the step where you define your ASM diskgroup you should choose
    external redundancy and then click on the change disk dicovery path and change the disk discovery path as follows.
    /dev/asm*
    Now at this point you will see the new disk name asmcrsd1 showing as a condidate disk for use wiith ASM.
    PLease let us know if this is a supported method for our shared disk configuration.
    Thank you.

    Hi,
    I've seen this solution in a lot of forums but I do not agree or don't like at all; even if we have 100 luns of 73GB each.
    so the thing is, as in any other unix flavor we don't have asmlib***just EMCPOWERPATH running on differentes unix/linux flavors we dont like either udev-rules, dm-path and stuff***
    Try this as root user
    ls -ltr emcpowerad1
    brw-r----- 1 root disk 120, 465 Jul 27 11:26 emcpowerad1
    # mknod /dev/asmdisks
    # chown oragrid:asmadmin /dev/asmdisks
    # cd /dev/asmdisks
    # mknod VOL1 c 120 465
    # chmod 660 /dev/asmdisks/VOL*
    repeat above steps on second node
    asm_diskstring='/dev/asmdisks/*'
    talk with sysadmin and stoadm guys to garanty naming and persistents in all nodes of your RAC using emcpowerpath. (even after reboot or san migration)

  • In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

    In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

    In Address Book, I would like to have a field "File As". So, l can list "Joe Smith", as "The Smith Family". I will use this when I print labels for Xmas cards and such. Thanks!

  • Had a windows computer with my element 7.  Now just bought a Mac OSX   version 10.9.2 what would be the best photoshop elements for this machine.  I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

    I thought elements were simple but maybe it is just me.  Having problems moving photos from iphoto to elements

    Duplicate post; see:
    had a windows computer with my element 7.  Now just bought a Mac OSX   version 10.9.2 what would be the best photoshop elements for this machine.  I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

  • HT3702 I have never ordered anything. Everything in this list.  Press to edit. To purchase anything from this game.  Answer "No" for the transfer of the game.  It has cost me a lot of money.  I did not like it and would not pay this amount. For games that

    I have never ordered anything. Everything in this list.
    Press to edit. To purchase anything from this game.
    Answer "No" for the transfer of the game.
    It has cost me a lot of money.
    I did not like it and would not pay this amount. For games that are too expensive.
    Billed To:
    [email protected]
    preethep notate
    Bangkok
    Bangkok 10400
    THA
    Order Number: MHBG76LW0Z
    Receipt Date: 22/05/12
    Order Total: $49.99
    Billed To: American Express .... 7009
    Item
    Developer
    Type
    Unit Price
    Real Football 2012, Suitcase full of coins
    Report a Problem
    Gameloft
    In App Purchase
    $49.99
    Order Total:
    $49.99

    This is a user to user forum. Apple is not here. Apple does not read here. Apple does not post comments or answers here.
    Use the Report a Problem link on the receipt to contact customer service.
    Also, change the password for your Apple ID connected to this account and perhaps remove the bank card information until you have this resolved.
    Manage your Apple ID -
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

    Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

Maybe you are looking for