Would this external monitor setup work?

I have purchased this (http://www.ebuyer.com/product/152744) 23 inch samsung with a resolution of 2048x1152 and am waiting for it to arrive.
Will it work using the mini display port to DVI adapter at that resolution? Or will i have to purchase that stupid dual link (i hope not >.<)
Any ideas or help will be appreciated, thanks.

Thankyou mate
Also, do you have any idea how it would look at 1920x1080?
Because i know that resolution looks good at 23" anyway, (think of the 23 inch ACD) but reckon itd look okay because its not the native res?
Many thanks for your previous answer.

Similar Messages

  • External monitor stopped working after 10.6.7 update

    I have a MacBook Pro, model identifier MacBookPro6,2 with an NVIDIA GeForce GT 330M.
    When I updated last night from 10.6.6 to 10.6.7 I stopped being able to use my Dell S2409W external monitor.
    I have tried resetting the pram, resetting the SMC, booting with extensions off.
    When I plug in the cable to the external monitor the Mac screen goes blue for about 0.5 second and re-appears but nothing displays on the external monitor; a second monitor is not listed in the Display preferences and the monitor reports that it is not receiving a signal.
    I don't see anything in the system.log when I plug or unplug the monitor cable (I'm not sure if I should).
    At random intervals while the external monitor cable is plugged in the screen goes blue for a half second and then re-appears.
    The screen does not go blue if I wiggle or flex the monitor cable.

    I see this in the windowserver.log after reboot, login with shift-key, and the external monitor connected.
    There might be a clue here but I don't have anything to compare it to since I haven't collected these data when the external monitor was working.
    I'd be curious to see the same data from the windowserver.log for somebody else with a MacBook Pro with an external monitor connected that does work.
    You can view this log with the console application located: /Applications/Utilities/console.
    If you are willing to share these data please reboot, and hold the shift-key down when logging in to disable extensions (thanks). If you look at the time just when the desktop appears when you end up looking at the windowserver.log you'll be able to see the windowserver starting up about 10 seconds prior to this time.
    Mar 22 21:31:26 [110] Server is starting up
    Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : boot screen
    Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : display alias 0x0 valid
    Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display1 : no display alias property
    Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display2 : display alias 0x0 valid
    Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x3f003e unit 2 alias mask 0x5
    Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x4272dc0 unit 0 alias mask 0x5
    Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, accelerator 0x00003137, unit 0, caps 0x00000003, vram 512 MB
    Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
    Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, accelerator 0x00003c0b, unit 2, caps 0x00000003, vram 288 MB
    Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
    Mar 22 21:31:27 [110] agc_attach: gMux mode is dynamic
    Mar 22 21:31:28 [110] CGXPerformInitialDisplayConfiguration
    Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cb7 S/N 0; online enabled built-in (0,0)[1680 x 1050], Rotation 0, base addr 0x102a00000
    Mar 22 21:31:28 [110] Display 0x4272dc2: MappedDisplay Unit 2; Vendor 0x610 Model 0x9cb7 S/N 0; offline enabled built-in (2704,0)[1 x 1], Rotation 0, base addr 0x113800000
    Mar 22 21:31:28 [110] Display 0x3f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1; offline enabled (2705,0)[1 x 1], Rotation 0, base addr 0x102a00000
    Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; ColorProfile "Color LCD" (MD5 a23cb9c96f2fd096b7a058db0d319259)
    Mar 22 21:31:28 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 202)
    Mar 22 21:31:35 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 206)

  • External monitor only works with clam shell open

    external monitor only works with clam shell open

    Are you using the method in this Apple article? If you do, it should work.
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display

  • External monitor not working - software upgrade

    Use an external LG monitor with my Macbook at work - has worked like a charm. There was an Apple software upgrade this weekend - today, when I came back to work, I can't get my external monitor to work. The Mac doesn't see that it's there and the monitor's stuck in Power Save Mode.
    Thoughts?

    I have reset the PRAM and confirmed that the monitor and cable are functioning properly, but still no change.

  • Ultra dock + three external monitors not working

    Hardware:
    W540 + Ultra Dock (170W)
    2x 24" LCDs @ 1920X1200 (DVI only)
    1x 30" LCD @ 2560x1600 (DVI only)
    1x Display Port to DVI Active Converter (for the 30" LCD)
    What I want to have is four displays: W540 LCD + 3 external monitors as described above. However, I can only get two of the external displays to turn on regardless of how many chickens I sacrifice. Note: I've searched extensively to see if others have had this problem, which they obviously have, but none of the solutions worked. 
    I think the issue is the 'advanced' mode, but I already turned it on in the BIOS. The laptop LCD works correctly (2880x1620), the 30" LCD works correctly with the display port to DVI active adapter (2560x1600), and one of the 24" LCDs works correctly (1920x1200). However, the other 24" LCD isn't available in Windows as a detected display unless I start swapping cables, which will then enable it while disabling the other 24" LCD.
    For reference, the connections are as follows:
    Laptop LCD (built-in)
    30" LCD: DisplayPort to DVI (active); Ultra Dock DisplayPort 0
    24" LCD number 1: DisplayPort to DVI cable (passive); Ultra Dock DisplayPort 1
    24" LCD number 2: DVI to DVI; Ultra Dock DVI Port 0
    It's my understanding that the K1100M discrete graphics card should be driving all three of the external displays, but that isn't the case right now. I see one 24" and the 30" displays in the Nvidia Control Panel and I see all three working monitors (including the laptop LCD) in botht he Nvidia Control Panel and the Windows Display area.
    Things I've tried:
    Uninstalled + reinstalled Nvidia Quadro drivers
    Uninstalled + reinstalled Intel 4600 drivers
    Enabled Advanced mode in BIOS
    Restarted 5,000 times
    Swapped cables until my fingers started to bleed
    Updated the firmware of the Ultra Dock (it was already fully updated)
    According to this page, I should be able to connect six displays including the built-in LCD. When I first looked at it, I thought I could use both Ultra Dock DisplayPort ports as well as the Ultra Dock DVI port, but it's very unclear if that's actually the case. What does it mean by DP or HDMI and DP or DVI? Does that mean I can use both DisplayPorts (which I'm currently doing and it works) only? Does it mean I can use both DisplayPorts as well as HDMI and DVI? Does it mean if I want to use HDMI and DVI that I can't use either DisplayPort? Does it mean DVI and HDMI both share an output with one of the DisplayPorts so only one of each can be used at a time? TERRIBLE DOCUMENTATION.
    Any help would be greatly appreciated as this has been extremely frustrating. I have a feeing the solution is going to be a disappointment as well because it's probably going to involve buying yet another adapter and/or using the Mini-DP output on the laptop instead of, you know, actually being able to use the expensive Ultra Dock...
    [rant]
    I have no idea how to tell if everything is working because the graphics card situation is extremely confusing. I didn't realize when I bought the laptop that the discrete card couldn't drive the laptop's built-in LCD, which is very annoying. Or, maybe that's not true, but the documentation is so confusing that I can't be sure either way. Also, and this really pissed me off, the Ultra Dock DVI connector can't drive a dual link display. What the hell??? Why was this not clearly annotated somewhere? I really hated needing to purchase a DisplayPort to DVI active adapter to make my brand new laptop dock work as advertised. UGH.
    [/rant]

    I'm struggling with a very similar problem. (Thinkpad W540, K2100, Ultradock 170W)
    I am using 2 external monitors right now in bios display standard mode - it's the only way they work at all for me right now. I have tried uninstalling graphics drivers, enabling advanced mode, and restarting, but none of the external displays are detected. I've also tried updating the dock's firmware, but it doesn't seem to be updating (this may have already been updated).
    Current working setup:
    - 2 x 22" external LCDs connected to Ultradock via DP -> DVI cables
    - Laptop integrated LCD
    Related but not quite as equally frustrating, the integrated LCD does not resume when waking the computer from a sleep state. Only a reboot brings the display back.
    I'd like to connect another 24" display over HDMI, but don't have any confidence of it working since advanced mode is utterly worthless for me at the moment. I'm quite dissatisfied especially since I purchased an extended warranty and last time I called for support Lenovo tried to sell me an additional support plan claiming that software was not covered under my current warranty.

  • Strange issue with external monitor, only working when external speakers plugged in (using Thunderbolt to VGA adaptor)

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap Chinese knockoff adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Well, I went back into Best Buy to test on 3 other laptops (2 Asus, and their floor model for this Sony). It seems to be doing the same problem so at least I was able to rule out broken hardware issue on my particular laptop.
    Here's what I did to test:
    Since I couldn't really install Adobe Premiere on their machines, I used the DVIO software (http://www.carr-engineering.com/dvio.htm) and a 5 min clip I captured.  I transferred onto their machines, hooked up my Sony D8, and attempted to play the video.  It would play for 15 seconds and then stop and jitter with a loud noise (like it does on my laptop).  I even tried changing each machine's firewire driver to the legacy one and same results.  I pulled a brand new 4 pin to 4 pin firewire cable off their shelf and still the same problem.
    I think I've nailed it down to Win7x64 bit Home Edition not playing nice with Firewire driver.  Very annoying.  I can't find any concrete evidence of this from other users on any of the forums that have my particular problem, but from my own testing, it's all I can conclude.
    I have 2 other things I can try:
    1.  Opening the laptop and looking at the firewire to maybe find appropriate driver (ugh, I don't want to have to open this thing up).
    2.  Upgrading to Win7x64bit Pro and possibly testing with XP on the new MS Virtual PC (http://www.microsoft.com/windows/virtual-pc/).  I can't do it with my Home edition apparantly.
    Who needs to view video on an external TV anyways....sheeesh...(scarcasm).
    Tim

  • MBP i7 15" - External Monitors not working

    Hi All,
    Ive been using HDTVs over HDMI and Dell Monitors over DVI fine for the last 2 months, but as of a few weeks ago. I cant get any output at all on either connection!
    When I plug in my Miniport adapter, the MBP screen blinks blue (as it usually did, when about to change display settings) but then nothing happens. No external monitor output at all, in any shape or form!
    Similarly, when I plug the HDMI/DVI into the TV, it auto-detects that something has been plugged in and begins trying to auto-detect a signal but to no avail (mean while the macbook screen flicks to blue as described above).
    I refuse to believe that my adapter is knackered, as when plugging and unplugging, both TV and MBP show signs that its trying to connect.
    I've rebooted, and done the SMC reboot, and even uninstalled gfxCardStatus in case that was affecting it, but no Joy.
    I have upgraded to 10.6.5 but I cant be sure when this actually occurred, and as to whether or not this caused the problem.
    Any help would be lovely.
    Kind Regards
    Oli

    I'm struggling with a very similar problem. (Thinkpad W540, K2100, Ultradock 170W)
    I am using 2 external monitors right now in bios display standard mode - it's the only way they work at all for me right now. I have tried uninstalling graphics drivers, enabling advanced mode, and restarting, but none of the external displays are detected. I've also tried updating the dock's firmware, but it doesn't seem to be updating (this may have already been updated).
    Current working setup:
    - 2 x 22" external LCDs connected to Ultradock via DP -> DVI cables
    - Laptop integrated LCD
    Related but not quite as equally frustrating, the integrated LCD does not resume when waking the computer from a sleep state. Only a reboot brings the display back.
    I'd like to connect another 24" display over HDMI, but don't have any confidence of it working since advanced mode is utterly worthless for me at the moment. I'm quite dissatisfied especially since I purchased an extended warranty and last time I called for support Lenovo tried to sell me an additional support plan claiming that software was not covered under my current warranty.

  • Strange issue with external monitor, only working when external speakers plugged in

    Hey – I am having a very strange issue with my external monitor; where it only works if my external speakers are plugged in and connected.
    I am using a late 2011 Macbook pro, running Mavericks 10.9.4, along with an MBox 2 (USB Audio Interface), and two powered speakers (KRK Rokit 5). This setup has had no issues. I have just acquired an external monitor (Benq T2200HD), which I am using with a thunderbolt to VGA adaptor (a cheap non-apple adaptor).
    To start - I plugged the monitor in with the thunderbolt adaptor, and it powers up and works fine. However, there is a nasty buzz coming from the speakers. I did some research and it looks like a simple ground loop issue. I did a bit of troubleshooting, and this is where things get weird.
    What I found is - If I unplug the MBox, the monitor loses signal from the computer (displaying ‘No Signal Detected!’). Further, if I keep the MBox plugged in, however unplug both the cables from the MBox to the speakers, the monitor loses signal. It doesn’t matter if the speakers are turned off, however they need to be plugged in (or the monitor loses signal). Weirder still, I can unplug the MBox, however the monitor will work if I plug in the speakers through my macs headphone jack.
    Simply put, the monitor only works if there is a direct connection between the computer, the speakers, and the power source.  What is going on here? Is the monitor grounding through the computer port, to the speakers (I don’t know how this works, is this possible?). Could it somehow be the cheap VGA adaptor I am using?
    Some other information:
    - Everything is plugged into the same multi-box for power. I have tried plugging things into separate sources, and the result is the same.
    - If I unplug the thunderbolt adaptor, then the speaker noise disappears straight away.
    - The ground noise doesn’t appear in my headphones, which are plugged into the MBox.
    Any information would be great – am I missing something here, or is this genuinely weird?

    Hello cgoldberg11
    Please go to the below link to test if you are having a speaker hardware failure.
    Testing for Hardware Failures (Windows 7)
    This will rule out hardware failure, let me know how that goes.
    Thanks
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP. .....
    Reguards,
    Mo

  • Can't get external monitor to work

    I've used a Mac laptop for the last 8 years, finally decided to get an external monitor for home use.
    I purchased a 25" Hanns-G HZ251. It's not working as I would expect it to work. I've got a standard DVI connection on my older MacBook Pro so I'm connecting via a DVI to DVI cable.
    The only way I can get the monitor to display what is actually on my laptop is to have my laptop open and mirroring turned on. I thought I could have my laptop shut and the monitor would still work when connected, but when I shut my laptop it just goes black.
    If I leave my laptop open but turn mirroring off, I get the generic purple Mac desktop, not my desktop.
    What am I doing wrong?
    There's an install CD that comes with it, but that only runs on a Windows machine. I appreciate any advice, I'm fairly technically handy but this is my first foray into using external monitors, so I'm definitely struggling to figure this out. Thanks.

    conejo61 wrote:
    Yes, it's connected to the power adaptor and I have an external trackball and keyboard.
    You will have to keep them both open and play around with monitor settings until you get them both working. Keep doing "Gather windows" in System Preferences to get the display preferences window for the 2nd monitor and change it each time it doesn't display anything.
    I don't know what it means "you will have to set it".
    You have to set the desktop for the additional screen. Once you get closed clamshell to work, the external monitor will be your primary screen and you won't have to worry about it.

  • External Monitor Not Working With Macbook Pro

    My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
    I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
    I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
    My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
    I need to get this problem fixed ASAP, any help is appreciated.
    Kind Regards,
    Sergee237

    I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

  • External monitor not working after ML upgrade

    I have a late 2008 Unibody Macbook and normally use it in clamshell mode with a Samsung 2043NW monitor if I'm in the office. Previously working fine in 10.5.8 through mini display port adapter. Upgraded via fresh install of 10.6.8 to ML, and the monitor flickered on occasionally but otherwise would not work - when it did display it showed the same resolution as the macbook screen i.e. 1280 X 800 instead of 1680 X 1050.
    There's a thread here related to this: https://discussions.apple.com/thread/2387462?start=15&tstart=0  but this software was not the answer. I can now view the screen, but it is still being sent a resolution of 1280X800, rather than 1680X1050 (i.e. a fuzzy mess). It also will not work in clamshell mode at all, and just goes to sleep when the case is shut.
    Anyone have a solution for this, or have I been 'obsolesced'? Does anyone have a unibody Macbook that DOES work with an external monitor?

    OK, now here's an interesting thing - the macbook has begun to work in clamshell mode. This is REALLY weird. Tried again this morning in the hope of getting back the monitor control icon in the toolbar and it booted straight into clamshell mode with the lid shut.
    When I first had this running 10.5 it would only work in clamshell mode if you pressed the power button and immediately closed the lid before the screen lit up grey. More recently it has been perfectly happy to enter clamshell mode after a period of use normally, just plugging in the monitor and shutting the lid. It would be nice if this behaviour were to start again soon.

  • Can't seem to get DVI and external monitors to work (works on windows) ?

    I'm going crazy here and I'm starting to think something is broken/wrong with the mbp I just purchased (I'm hoping it's just me and not the mbp)...
    I have a BenQ FP91G+ LCD monitor that works fine using dvi with my windowsXP machine. When I try to get this monitor to work using DVI with my mbp all I can get is a black screen. The mbp sees the monitor fine since I can see it in the display settings. I've tried every different resolution available in the display options (with mirroring off and then again with mirroring on). No luck with dvi. However, if I use the vga cable with the dvi adapter things are fine.
    I then tried two other lcd external monitors with the dvi input (one a Princeton model here at home, and a different model that I tried in a Best Buy - I think it was a sycmaster). The Princeton at home had the same BenQ problem - just a black screen no matter what I tried. The one in best buy, however, got a 'bit' further when I set its resolution to 800x600 - but even then it was bad since the display was just scrolling vertically.
    I'm a bit stumped what is going on. I really should be able have this digital output work since all three of these monitors work fine with the dvi cable on windows.
    Is there something seriously wrong with my mbp? What else should I try? Thanks for any help. (I've been searching these forums but haven't found anything yet to help.)

    Thanks iVmichael, that makes me feel a little better at least. I'm guessing maybe the issues I'm having might be driver related? Seems odd that all 3 monitors I would have a problem with, but I guess it's possible. I can deal with the dvi-vga adapter usage, just don't want to something to be wrong with the hardware on the mbp.

  • External monitor stopped working!!

    My external monitor just stopped working today as soon as i upgraded to Mac OS 10.6.4 from 10.6.2.
    When I unplug it and plug it back the screen goes blue very briefly but then nothing happens.
    I tried the detect display button, I tried resetting the PRAM and nothing's working.
    I really need to get that monitor to work. Help would be greatly appreciate.
    Thank you

    Yep, have the same problem using a 3rd party cablesson mdp-hdmi adapter. Everything worked fine until quite recently. I have tried pretty much everything to fix it but nothing seems to work. I'm almost convinced it's an OS problem, as everything works fine when I boot into my windows bootcamp partition.
    Apple, please get this sorted! I'm reluctant to shell out $35 only to find that I have the exact same problem with the official adapter. Though I probably will anyway because I urgently need to get my display working again.

  • IMac external monitor not working after lion upgrade

    Hi,
    I have had an external monitor hooked up to my 09' imac for over a year now. I upgraded to Lion and ever since then it hasnt worked but one other random time when I moved and hooked everything back up. Im very tech savy, but this just doesnt make sense. Have combed google to find a solution. I have a Samsung 22in moniter and all the blue power button does is blinks at me. I am using a miniDisplay to DVI connection.
    Does anyone have any suggestions other than resetting the ram?

    I guess it's possible you've got some kind of hardware problem.... but not likley given it started with you installed your OS.
    Here's a few things to try:
    1. see if you can borrow another monitor just to be sure your monitor isn't the problem.
    2. in System Prefs, and the Displays pane, click on the Detect Displays, then then the Gather Displays. If you get two diffenet display panes, that would lead me to think it's a monitor problem.
    3. Lastly, disconnect your 2nd display, and restart. Then Shutdown, reconnect it, and see if that helps.
    and of course..
    4. make sure that all of your connections and adaptors are tight.

  • External Monitor Setup Help

    I was wondering if anyone knew a way that I could connect my laptop to another monitor, and then connect the laptop to my Macbook Pro, and use both the laptop's monitor, and the monitor it's connected to, as external monitors. I was also thinking I could possibly throw in my 2nd Gen iPod Touch and my iPad as even more visual space. This would be an amazing setup and a huge accomplishment for me, and I could amaze everyone I know when they come over. Just in case it's useful, the Macbook Pro is a (I think it's refurbished) 2007 version. If anyone needs more info about ANYTHING, I will gladly provide it.

    Never mind. I posted this on another website and got a little bit of help from there, but I did most of it on my own. I'm using ScreenRecycler trial version (NEVER BUY IT, THERES NO POINT) to connect to my Macbook Pro to my laptop, iPad, or iPod touch, whichever I choose. I can only do one at a time and I didn't have to spend any money at all! I can also connect my laptop to my monitor or TV and add another screen into the play! The only downside is that the TV stays as Windows while the laptop is connected with my Mac, unless I drag the window to the TV and then the laptop stays as windows. It's almost like having 2 Macs and 1 PC! Thanks to anyone who even considered helping me.
    arecusrulz

Maybe you are looking for