Would you like to change the frame rate of the project to 30 to match to m

I just now moved some film clips from the Event Library to the Project Library and a white message window appeared saying: *MISMATCHED FRAME RATES. The frame rate of t his cli is 30 and the frame rate of the project is 25. Would you like to change the frame rate of the project to 30 to match the clip? And two radio buttons: Don't Change and Change.
First of all, the other day I set my Sanyo VPC-HD2000A to shoot film at 1280 x 72 at 30 fps SHQ. Now I just checked and it is set at the topmost red zone960 x 540 at 30fps. The only thing I can think of to explain this is that I selected it but did not "set" it.
Thus now I have a message asking what I noted above. Should I click CHANGE?
WHY IS THE FRAME RATE OF THE PROJECT SET AT 25? How did I do that? What did I do that caused me to have a project that is set at 25 fps?????
Time for another snack. 8-(
-L
A side issue is to find out why I set my Sanyo VPC-HD2000A at one rate (above) but now see that all the footage was shot at a different rate. Very very frustrating.

AppleMan,
It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
-L

Similar Messages

  • 1 new update have been added to the project would you like to close the project and apply these updates message in project 2010

    1 new update have been added to the project would you like to close the project and apply these updates message  in project 2010.
    One of the PM is getting above message and not any recent changes happened?

    Hi,
    This message appears when an update has been sent for his approval and is pending. It could happen while opening the project plan, or when clicking on something like "retreive tasks updates" from the backstage menu of MS Project Pro.
    The PM should go to his approval center and check for any approval pending.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • TS1702 i bought my phone from a friend who came from another country and would now like to change the phone to a system supported in my own south africa

    i bought my phone from a friend who lived in china and would now like to change the phone to allow me to use the internet in south africa

    If it is a genuine iPhone 4S (I know many people who have been duped by the cheap Chinese knock-off) then it should be unlocked for use with an SA SIM card. MTN and Vodacom both use the APN "internet", and you may find that if you are using a Vodacom SIM then the default APN is set as "iphone.vodacom.za". Change this by:
    (iOS 6+) Going into Settings > Mobile Data > APN Settings and changing the APN to "internet".
    (iOS 5<) Going into Settings > General > Network > Cellular Data Network and changing the APN to "internet".
    I'm not sure what the APN is for Cell C, 8.ta and Virgin but I'm certain they are the same.
    Hope this helps.

  • I keep getting this pop-up every few minutes: "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I'm sick of it!!! How can I get rid of it???

    Duplicate of [/questions/860865]
    Question
    I keep getting this pop-up every few minutes: "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I'm sick of it!!! How can I get rid of it???

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    <br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • What can cause "Would you like to update the saved password?" When there is no password saved?

    Lately, I am seeing this prompt for "Would you like to update the saved password?" when I log into password protected sites, where there is actually no saved password. Like the Bank of America site, I don't want the browser to save the password. What would cause this? I can just envision me clicking YES to update the saved password, then I have just somehow sent my password to hackers. Is this a known issue, or am i looking at a possible security breach here?

    Firefox shows this notification if you use the Password Manager to fill the name and password and you change/modify the password that was previously saved. This can also happen if there is a script running that modifies the password field.
    You may disable the remember password incase it's needed by doing the foll:
    Tools-> Options -> Security -> Uncheck remember passwords for site.

  • I keep getting this pop up. This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? Can you please help me figure out how to get this to stop!

    This pop up has been occurring about once a minute when I am on certain sites.
    This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
    How do I get it to stop?

    -> Tap ALT key or press F10 to show the Menu Bar
    -> go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. Now do this:
    -> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
    -> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
    -> go Tools Menu -> Clear Recent History ->'' Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
    -> go to Tools Menu -> Options -> Content -> place Checkmarks on:
    1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
    -> go to Tools Menu -> Options -> Privacy -> History section -> Firefox will: select "Use custom settings for history" -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
    1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
    4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
    -> go to Tools Menu -> Options -> Security -> place Checkmarks on:
    1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
    -> Click OK on Options window
    -> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
    -> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
    You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

  • Everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? With the options cancel, continue restore and delete back-up??

    I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?

    I'm not getting the message anymore!
    What I did:
    1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
    2.- Upgraded to iOS 5.0.1
    Done!
    PS: Maybe upgrading solves the problem without erasing the corrupted backup

  • How do I stop the box "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?

    I have cleared my cookies and cache and disabled some add ons, but when in Facebook and specifically for Farmville, I keep getting the pop up box, "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I have closed and opened the browser, too and it still keeps coming up.... Please help!!! Thanks.

    You can't avoid that if the website is coded that way and data needs to be send from one server to another server.

  • How do i get rid of the confirmation popup that says This web page is being redirected to a new location. Would you like to resend the form data you have typed

    when navigating on certain sites (fiverr.com is one), i get the popup confirmation "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?"
    this is highly annoying and i can't find a way to turn this annoyance off. help!

    because of its impact on security this error message cannot be suppressed. you might want to contact the admins of the website where this is occuring and ask them to implement a handling of user input without sending it to a different server...

  • I keep getting this error message on my Mac after my Mavrick upgrade: This web page is being redirected to a new location. Would you like to resend the form dat

    how do I turn off this notification. I build web stores and this pops up when I access my store now. The stores have a redirect with masking through godaddy.com to hide the source of the store. I have reset fire fox, turned off most of the settings and still having issues. most of the forms on line are outdated.
    Thanks

    There is a way to turn off the warning for a 307 "temporary" redirect. However, bear in mind that customers will still see it, so you may want to reconsider the design for business reasons.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box that appears above the list, type or paste '''redi''' and pause while the list is filtered
    (3) Double-click '''network.http.prompt-temp-redirect''' to switch its value from true (the default) to false.
    References:
    * [https://support.mozilla.org/en-US/questions/779492 I receive this usually in facebook only. " This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" How can I stop this?] - related to filtering/protection service
    * [https://bugzilla.mozilla.org/show_bug.cgi?id=818850 818850 – The dialog "...new location..." is too annoying and is misleading about the page it comes from] - information about the bug tracking system:
    ** [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette]
    ** [https://bugzilla.mozilla.org/page.cgi?id=voting.html Voting]

  • This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?

    This alert pops regularly every 10-15 minutes:
    This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?
    I did some serious research / checked for viruses / removed and reinstalled Thunderbird and Firefox. Please read this carefully.
    1. With Firefox closed (default browser), I can open T-bird without any issues and use it just fine.
    but,
    2. the minute that I open Firefox, T-bird give me a popup message of: This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location? This is not under the Firefox Browser. It is under the T-bird Tab of my computer.
    It does not matter what kind of email you have open, whether it be text or HTML. It pops up.
    If I have T-bird open (default email client) and use Chrome or IE with Firefox closed it doesn't happen.
    Computer is Windows 7 Pro x64-Bit.

    This started after the latest Thunderbird update was applied. Like you I have done the same check outs. I found that Thunderbird starts then, without any direct request, FireFox starts as well. Then the messages start popping up. Have already checked and confirmed that the old FireFox posting fixes did not impact the behavior. Looking for an answer.
    Same configuration Windows 7 ThinkPad T430.

  • I would like to change the project page layouts, but setup option in Project Superuser are not available. How can I change the selected page layouts?

    Hi
    I updated the page layouts for a project in Project Management. Now I woujld like to change those chosen page layouts, but the setup options for the project are no longer available for me to change. How can I update the original chosen page layouts (for performance management) to different layouts or change the chosen layouts to the default (blank) layouts?
    Thanks
    Chris van de Graaf

    AppleMan,
    It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
    I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
    I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
    Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
    -L

  • Question I keep getting this pop-up every few minutes: "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I'm sick of it!!! How can I get rid of it???

    It does it mostly on Facebook...but now it has stared doing it on Google also!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    <br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Would you like tell me the "tp showbuffer sid pf= profile name format?

    Hi, could anybody tell me the format and the means of each column when running command  tp showbuffer <sid> pf=<profile name>) on the SAP ABAP Application Server ?
    Does the columns has any relationships with transport requests via the STMS TCode?

    Thank you,  Marcus.  I want to know all the transport information in the buffer,so i use tp showbuffer to check the buffer.
    The following is output after i execute the "tp showbuffer U06 pf=/usr/sap/trans/bin/TP_DOMAIN_U06.PFL" command
    [u06adm@tivu06 ~]$ tp showbuffer U06 pf=/usr/sap/trans/bin/TP_DOMAIN_U06.PFL
    This is tp version 340.15.06 (release 640, unicode enabled)
    Warning: Parameter DBHOST is no longer used.
    Warning: Parameter DBNAME is no longer used.
    U06 buffer:
    ITMK621_00004U      |                    | |has already been imported completely. \n\r
    TASK                |PROJECT             |P|CMD I |DD Im |Activ |MainI |MC Ac |ADO I |VersF |XPRA  |Gener |UMODE|TAGS
    ---------------+--+--+--+--+--+--+--+-+--
    ITMK621_00003U      |                    | |0004 |0004 |0004 |0004 |      |      |0000 |0004 |*0000 |I    |   
    TV2K900230          |                    | |0000 |0004 |0004 |0000 |      |      |0000 |0000 |*0008 |I    |   
    SAPKLZH640SR1NW04FF0|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF1|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF2|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF3|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF4|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF5|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF6|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF7|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF8|                    | |has already been imported completely.
    SAPKLZH640SR1NW04FF9|                    | |has already been imported completely.
    ITMK620_68293U      |                    | |0004 |0004 |0004 |0004 |      |      |0000 |0004 |*0000 |I    |   
    ITMK621_00005U      |                    | |0004 |0004 |0004 |0004 |      |      |0000 |0004 |*0000 |26I  |   
    ITMK621_00005_DELETE|                    | |0000 |0000 |0000 |0000 |      |      |0000 |0000 |*0004 |I    |   
    ITMK621_00006U      |                    | |0004 |0004 |0004 |0004 |      |      |0000 |0004 |*0000 |I    |   
    ITMK610_00133       |                    | |0004 |0004 |0004 |0004 |      |      |0000 |0000 |*0000 |I    |   
    ITMK610_DELETE      |                    | |1     |216   |216   |1     |4     |      |291   |17    |40    |     |   
    ITMK620_00047U      |                    | |has already been imported completely.
    ITMK620_10337U      |                    | |0004 |0004 |0004 |0004 |      |      |0000 |0000 |*0000 |I    |   
    ITMK620_00048U      |                    | |0004 |0004 |0004 |0004 |      |      |0000 |0000 |*0000 |I    |   
    that makes 10 transports to be imported.
    tp finished with return code: 0
    meaning:
      Everything OK
    I want to know the column means in the output as below:
    TASK                |PROJECT             |P|CMD I |DD Im |Activ |MainI |MC Ac |ADO I |VersF |XPRA  |Gener |UMODE|TAGS

  • ITunes 10: Would You Like To Find the Location?

    FIRST some housekeeping issues:  This website is shutting down Windows Internet Explorer like a brothel too close to an elementary school.  Secondly, it doesn't remember my password - and don't anybody tell me to "clear my cache" - cache THIS!!
    Now, the above iTunes 10 is increasingly displaying a message along the lines of this thread's header, above.  A small exclamation mark(!) appears after the title of the "missing" song.  What kind of sugar-honey-iced-tea is that?!  The files are all where they've always been - in C:/users/Music/iPod Touch4 Image !! (That's my name for the folder containing everything I want on iTunes, and by extension, on my iPods.
    WTH is going on here?  The songs arent' missing at all.

    I run into this problem from time to time but can't explain why it happens.I approach fixing it in one of two ways depending on how many songs in a playlist have the "!" next to them. If only a few, in turn, I double-click each song in iTunes, locate and and double-click it in the hard drive folder. However, if a lot of songs in a playlist are like this, I delete the songs from the playlist, delete the playlist, delete the songs from the library, and re-import those songs back into iTunes. I then re-create the playlist, select all the songs I've just imported (Recently Added folder), and chooose the re-created playlist.
    Perhaps someone else knows an easier method, but these steps have worked for me.

Maybe you are looking for