Wow, faster speeds thanks to you guys! But I could...

Hi,
Me again. I would just like to say thank you to everyone here who helped me out. I bought a BT Business hub and my speed has rocketed. My line capacity was at around 650-750kbps, now I'm topping 950kbps, which means I went up a profile! This meant my speed increased by 50%, from (512kbps) 60kBps to (750kbps) 90kBps.
I couldn't be more grateful to be honest and I'm actually getting close to the next profile threshold of 1152kbps for a profile of 1000kbps. But, I musn't get greedy now, so I'm content with what I'm at.
The reason I need help is because I'm struggling to decipher the BT Business Hub.
The first question I'd like to ask is. Can I manage the devices connected to the router, i.e. Change their Client IDs to something more readable and apply Port Forwarding (e.g. for a games console) by client as opposed to by the DHCP IP address, like I could on the very user friendly BT Homehub 3?
The second question is, could you help me interpret this information? For instance, where it says Rate. Is that the IP Profile threshold I should be assigned to? And where it says Max Rate, is that my line capacity? The Rate cap, is that just the same as my Max Rate as it seems to change with it?
The reason I'm interested is because I like to know what's going on with my internet, and it frustrates me when I don't.
DSL DetailsDown Up
Modem Type:
Built in modem - ADSL
DSL Line (Wire Pair):
Line 1 (inner pair)
Current DSL Connection:
Rate:
864 kbs
288 kbs
Max Rate:
926 kbs
308 kbs
Noise Margin:
6.0 dB
7.0 dB
Attenuation:
63.0 dB
31.5 dB
Output Power:
16.2 dBm
11.5 dBm
Protocol:
G.DMT Annex A
Channel:
Interleaved
DSLAM Vendor Information
Country: {46336} Vendor: {IFTN} Specific: {48753 }
ATM PVC:
0/38
Rate Cap:
926 kbs
Attenuation @ 300kHz:
63.0 dB
Uncanceled Echo:
-15.9 dB
Ok
VCXO Frequency Offset:
22.4 ppm
Ok
Final Receive Gain:
34.5 dB
Ok
Impulse Noise Comp. Tones:
0
Ok
Excessive Impulse Noise:
0
Ok
Thanks guys,
You really are the best. I've gone from a 128kbps profile to a 750kbps one. That really is amazing.
Thanks again,
Mike

Hi to answer your second question max rate /rate cap the are the max your line can support
rate is your actual connection rate
as to port forwarding this may help
http://business.forums.bt.com/t5/Broadband-and-internet/BT-2700HGV-port-forwarding/td-p/7306 as to changing client ids it can be done but sorry i cannot remember how personally i never bother as all devices i have are permanently connected
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • I'm sorry to bother you guys, but this is all new to me! i'm wanting to place my face on another persons photo as a gag. i've been struggling with this all day! could someone explain to me how this is done, in language i can understand???  thanks in advan

    I'm really sorry to bother you guys, but this is all new to me! i'm trying to put my face on another persons photo as a gag! i have been struggling with this all day! can anyone explain to me how  this is done in language i can understand???  thanks in advance!

    What software do you own?  Give details, please.
    Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
    It's not something you can learn in a forum, question by question.  Teaching someone Photoshop from scratch exceeds the scope of this or any other forum.
    The process involves isolating your face, by selecting it and deleting the unwanted parts around your face or with layer masks, then placing it as a new layer on top of your target image, making sure it's the right size, color, lighting, etc.  Google for tutorials on any of those elements you are unfamiliar with,

  • I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

    I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

    Have you tried using VLC media player it seems to play almost any codec without converting.
    https://www.macupdate.com/app/mac/5758/vlc-media-player

  • I use virginmobilebroadband2go on my desktop, ie8 or anything but google so far is too slow. want to change to you guys, but how fast is it and will it work with my bb2go ?

    Virgin Mobile Broadband2go usb, ie anything too slow and lags, found google chrome to be good, but they have gone Government on us!!! So i wonder if Firefox is compatible, slow? will it be as fast as chrome before I install? Any problems with using bitcomet or other torrent search things? Thanks... If not can you or will you suggest a simple browser that wont Big Brother us? (watching!)
    BTW your Thunderbird is awesome..

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • 2 approvals 1 pending, thanks to you guys on this forum

    My mom was telling me she wants to get a travel card. SO, I did a quick search on here at the posts and encouraged her to get the chase sapphire, it was not an instant approval and she was ready to throw in the towel so I gave her the backdoor number and she just needed to verify apt #. $15,300 approval. Next she went for the venture with instant approval for $10,000 Finally she went for the NFCU flagship (not sure why she picked this one and I didn't even browse to see what it was) But got the 3-5 day message and was told to call back next week and it is not a denial. I am happy for her!!!! Thanks to all of you active posters!!!

    Thanks again!
    Revelate, I am not sure, last she told me with her fako scores from CapitalOne was about 750 something.  I know she did check her fico score but cant remember what she said it was. She pretty much have the prime cards, C.O she had for over 5 years (starter), an amex, chase freedom.  One store card: Macy's.

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • I had a problem in the Hard Laptop MacBook Pro you replace hard I could not install the system

    I Abdul Razak from Syria.
    Since a short period of OS X system stops working and request a new download system when what do I install the system and I can not show me a message that the disk is locked. I asked one of my friends about the problem and Nsahana that I replace the hard and you do, but I could not install the system or OS X on the new hard?
    I wish to help and quickly Thank you.

    Zap the PRAM and Reset the SMC, then try again.

  • Oh wow finally apart of a community im so excited. Hi everyone. I just got abode edge animate and am not so familiar wif this product though i sense a hint of flash buried there somewhere can you guys please assist me in the basics of edge? thanks.

    Oh wow finally apart of a community im so excited. Hi everyone. I just got abode edge animate and am not so familiar wif this product though i sense a hint of flash buried there somewhere can you guys please assist me in the basics of edge? thanks.

    That's going to be a ridiculous waste of money and energy.
    First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
    I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
    I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

  • Thank you guys for helping me out now I can now access my IPad. But there is one more challenge, the iPad is showing negative view so I can not see the true color of things

    Thank you guys for helping me out now I can now access my IPad. But there is one more challenge, the iPad is showing negative view so I can not see the true color of things

    Settings>General>Accessibilty and turn off white on black.
    Matt

  • Help! This probably sounds dumb, but I got my Ipod touch fourth generation yesterday and they said I could sync the music from my computer to the Ipod. Could you guys help me do that? All the websites I have looked on don't help. Thanks!

    Help! This probably sounds dumb, but I got my Ipod touch fourth generation yesterday and they said I could sync the music from my computer to the Ipod. Could you guys help me do that? All the websites I checked didn't help. Thanks!

    You need to read the manual
    Click Support at the top of this page, then click manuals
    Open itunes, connect ipod, select what you want, sync

  • Hi, i need your help. I'm thinking of buying an iPod Touch 5..but i own a wireless G Router at home. So can iPod Touch 5 connect to a wireless G router? Will it connect easily and fast? Thank you.

    Hi, i need your help. I'm thinking of buying an iPod Touch 5..but i own a wireless G Router at home. So can iPod Touch 5 connect to a wireless G router? Will it connect easily and fast? Thank you.

    Hi, i need your help. I'm thinking of buying an iPod Touch 5..but i own a wireless G Router at home. So can iPod Touch 5 connect to a wireless G router? Will it connect easily and fast? Thank you.

  • Hello am dominic and i want a help from you guys out there i hope you will be able to help me out...i have an i phone which i bought from a friend but it has this i cloud account i wanna know if you can help me wipe it so i can usse it..thanks

    hello am dominic and i want a help from you guys out there i hope you will be able to help me out...i have an i phone which i bought from a friend but it has this i cloud account i wanna know if you can help me wipe it so i can usse it..thanks

    Only your friend can unlock it, either by giving you his Apple ID and password, or by removing it from his list of devices - please see:
    http://support.apple.com/kb/TS4515
    There is no way at all it can be unlocked without his doing this.

  • Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it acr

    Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
    Thank you, and sorry for the language.
    Vitas Dijokas
    I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me:  “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
    It is ******* outrageous, and you should know that,  guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone)  authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
    Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
    Vitas Dijokas

    Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
    So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
    If someone knows how to fix this and make firefox launch normally, please reply! Thank you

  • ITunes 7.1 - Thank you Apple, but...

    iTunes 7.1 - Thank you Apple, but...
    ...it doesn't fix my problem with Vista
    Here's the details, and the log from iTunes iPod diagnostics. My laptop previously had XP Pro SP2 and I upgraded (not clean install) to Vista Ultimate.
    I uninstalled iTunes 7.0.2, rebooted, downloaded iTunes 7.1 and installed it.
    My Symptom:
    When I connect my iPod, iTunes freezes, Windows explorer stops responding, and the iPod does not show up as a
    device with removable storage. It does appear in Device Manager as a USB Mass Storage Device, though the device
    appears to reset itself apporximately once a minute.
    Following is the diagnostic log. Here, with timestamps to coordinate with the log, are the steps of what I did over
    the duration of the log.
    17:38:56 - Stopped then started the iPodService (to reset the diagnostic logs from previous attempts).
    Started a windows explorer, looking at "Computer" to watch for the removable device storage to appear.
    Started a device manager, looking at USB devices to watch for the iPod USB Mass Storage device to appear.
    Started iTunes 7.1, to watch for iPod to be recognized.
    17:40:45 - plugged in iPod - USB Mass Storage Device appears in device manager.
    Within a few seconds iTunes was frozen - no screen refreshes, no reponse to mouse. Also, Windows Explorer shows as
    "Not Responding" and does not refresh or respond to mouse or keyboard.
    At this point I waited approx 5 minute, and visible symptoms did not change - iTunes and Windows explorer still
    frozen.
    Periodically, the device manage screen refreshes as if a device were disconnected or connected. This appears to
    corespond with the [DevNodesChanged] log messages starting at 17:41:51, 17:41:57, 17:42:57, 17:43:03, 17:44:04,
    17:44:10, 17:45:10, and 17:45:16.
    At 17:45:40 I unplugged the iPod. (Previous tests waiting up to 20 minute showed me this was the only way to
    unfreeze iTunes and Win Explorer).
    Watching carefully at this point I observed:
    Windows explorer refreshed and Drive E: appeared briefly then went away;
    iTunes refreshed it's screen, and would now respond;
    The USB Mass Storage Device in device manager went away.
    Given that I unplugged the iPod at this point, I think we can safely ignore log messages after 17:45:40.
    The one message that stands out for me is:
    [SERVICE: 0x16C4,17:40:50 ERROR] Did not find first letter of stage
    While this shows as an error, I see no evidence of any sort of error recovery taking place.
    To verify that my USB devices are working, I first plugged in a USB mouse which was recognized properly and worked
    fine. I then tried a USB thumb drive which appeared correctly as a USB Mass Storage device and worked perfectly. I
    tried the iPod on two other USB ports with virtually identical results, so I'm certain the hardware and the default
    USB device drivers are fine.
    Here's the log from the experiment:
    Microsoft Windows Vista Professional (Build 6000)
    TOSHIBA Satellite A75
    iTunes 7.1.0.59
    iPodService 7.1.0.59 is
    currently running.
    iTunesHelper 7.1.0.59 is currently running.
    Current user is not an administrator.
    Connected Storage
    Devices:
    DiskDrive, FUJITSU MHU2100AT ATA Device, Channel 0, Target 0, Lun 0
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller.
    Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    IEEE 1394 Host
    Controllers:
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    The last
    connected iPod serial number: 4J549JVQTXK.
    The iPod Service Logging Information:
    [SERVICE: 0x17E0,17:38:56 INFO]
    Started C:\Program Files\iPod\bin\iPodService.exe (Mon Mar 05 17:38:56 2007)
    [SERVICE: 0x17E0,17:38:56 INFO] ##### iPodService starting as a service, version: 7.1.0.59
    [SERVICE: 0x65C,17:38:57 INFO] Timed out... Starting device manager!
    [SERVICE: 0x1474,17:38:57 INFO] Listener Window created
    [SERVICE: 0x1474,17:40:45 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:40:45 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:40:45 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:40:49 INFO] [InterfaceArrival] \\?
    \usbstor#disk&venapple&prod_ipod&rev1.62#000a270014aaa27e&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x1474,17:40:49 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270014aaa27e&0#{53f56307-
    b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x1474,17:40:49 INFO] device is an iPod
    [SERVICE: 0x1474,17:40:49 INFO] type 0x7 drive 0x1 partition 0x0
    [SERVICE: 0x1474,17:40:49 INFO] [-1] set waiting to mount = 1
    [SERVICE: 0x1474,17:40:49 INFO] [1] Assigning session 1
    [SERVICE: 0x1474,17:40:49 INFO] [1] added device interface "\\?
    \usbstor#disk&venapple&prod_ipod&rev1.62#000a270014aaa27e&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to
    m_objDeviceNameMap
    [SERVICE: 0x1474,17:40:49 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0x1474,17:40:49 INFO] [1] added device number 1 to m_objDeviceNumberMap
    [SERVICE: 0x1474,17:40:49 INFO] [1] added device interface "\\?
    \usbstor#disk&venapple&prod_ipod&rev1.62#000a270014aaa27e&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to
    m_vctDeviceInterfaces
    [SERVICE: 0x1474,17:40:49 INFO] [1] input #0 from src #0
    [SERVICE: 0x16C4,17:40:49 INFO] [1] input #0
    [SERVICE: 0x1474,17:40:49 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:40:49 INFO] [1] input #1 from src #0
    [SERVICE: 0x1D8,17:40:49 INFO] [1] input #1
    [SERVICE: 0x1474,17:40:49 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:40:49 INFO] [1] input #2 from src #0
    [SERVICE: 0x1790,17:40:49 INFO] [1] input #2
    [SERVICE: 0x1474,17:40:49 INFO] [VolumeArrive] mask = 0x10
    [SERVICE: 0x1474,17:40:49 INFO] looking up device # for \\.\E:
    [SERVICE: 0x1474,17:40:49 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x1474,17:40:49 INFO] iTunes device #1 found with drive letter E, mask 0x10
    [SERVICE: 0x1474,17:40:49 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x1474,17:40:49 INFO] [1] input #3 from src #0
    [SERVICE: 0x16C4,17:40:49 INFO] [MACHINE 1 INPUT #0] - (HDW) Interface Arrival
    [SERVICE: 0x16C4,17:40:49 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x16C4,17:40:49 INFO] [1] progress is now 2
    [SERVICE: 0x16C4,17:40:49 INFO] [1] progress is now 2
    [SERVICE: 0x16C4,17:40:49 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0x16C4,17:40:49 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0x16C4,17:40:49 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0x16C4,17:40:49 INFO] VendorId: Apple
    [SERVICE: 0x16C4,17:40:49 INFO] ProductId: iPod
    [SERVICE: 0x16C4,17:40:49 INFO] revision: 1.62
    [SERVICE: 0x16C4,17:40:49 INFO] vendor bytes:
    [SERVICE: 0x16C4,17:40:49 INFO] 02 01 00 00 00 00 00 00 00 0B 00 05 92 00 00 00 00 00 00 00
    [SERVICE: 0x16C4,17:40:49 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0x16C4,17:40:49 INFO] [1] Power State: Powered
    [SERVICE: 0x16C4,17:40:49 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0x16C4,17:40:50 ERROR] Did not find first letter of stage
    [SERVICE: 0x16C4,17:40:50 INFO] got HotPlugState 0
    [SERVICE: 0x16C4,17:40:50 INFO] [1] serial number 000A270014AAA27E
    [SERVICE: 0x16C4,17:40:50 INFO] [1] *** CONNECTED - Sending event out, device session 1.
    [SERVICE: 0x1D8,17:40:50 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
    [SERVICE: 0x1D8,17:40:50 INFO] [1] input #3
    [SERVICE: 0x1790,17:40:50 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
    [SERVICE: 0xA84,17:40:50 INFO] <0x4> Got Serial #
    [SERVICE: 0x1D8,17:40:50 INFO] [MACHINE 1 INPUT #3] - (HDW) Volume Mount
    [SERVICE: 0x1D8,17:40:50 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0x1D8,17:40:51 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0x1D8,17:40:51 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x1D8,17:40:51 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x1474,17:40:54 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:40:54 INFO] [1] input #4 from src #0
    [SERVICE: 0x1474,17:40:59 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:40:59 INFO] [1] input #5 from src #0
    [SERVICE: 0x1474,17:41:51 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:41:51 INFO] [1] input #6 from src #0
    [SERVICE: 0x1474,17:41:57 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:41:57 INFO] [1] input #7 from src #0
    [SERVICE: 0x1474,17:42:57 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:42:57 INFO] [1] input #8 from src #0
    [SERVICE: 0x1474,17:43:03 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:43:03 INFO] [1] input #9 from src #0
    [SERVICE: 0x1474,17:44:04 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:44:04 INFO] [1] input #10 from src #0
    [SERVICE: 0x1474,17:44:10 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:44:10 INFO] [1] input #11 from src #0
    [SERVICE: 0x1474,17:45:10 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:45:10 INFO] [1] input #12 from src #0
    [SERVICE: 0x1474,17:45:16 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:45:16 INFO] [1] input #13 from src #0
    [SERVICE: 0x1D8,17:45:40 INFO] [1] GetVolumeInformation() failed with error 87
    [SERVICE: 0x1D8,17:45:40 INFO] [1] ===== iPod with Video =====
    [SERVICE: 0x1D8,17:45:40 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x1D8,17:45:40 INFO] [1] iPod needs formatting...
    [SERVICE: 0x1D8,17:45:40 INFO] 17:45:40, year 2007, day of yr. 63, GMT offset -20 isDST 0
    [SERVICE: 0x1D8,17:45:40 INFO] FAILED! Last Error = 0x48F
    [SERVICE: 0x1D8,17:45:40 INFO] m_hDisk = 0x00000164, ScsiStatus = 0x00000000, sense pStrBuffer:
    [SERVICE: 0x1D8,17:45:40 INFO] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 00 00
    [SERVICE: 0x1D8,17:45:40 ASSERT] Assertion failure: 'result' [File: .\DeviceManagement\iPodDevice.cpp, Line: 694]
    [SERVICE: 0x1D8,17:45:40 ASSERT] Assertion failure: 'SetCurrentTime()' [File: .\DeviceManagement\iTunesDevice.cpp,
    Line: 2361]
    [SERVICE: 0x1D8,17:45:40 INFO] [1] Perform launch updater check.
    [SERVICE: 0x1D8,17:45:40 INFO] [1] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
    [SERVICE: 0x1D8,17:45:40 INFO] [1] progress is now 0
    [SERVICE: 0x1D8,17:45:40 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 1
    [SERVICE: 0x1D8,17:45:40 INFO] [1] input #4
    [SERVICE: 0x16C4,17:45:40 INFO] [1] input #5
    [SERVICE: 0x1790,17:45:40 INFO] [1] input #6
    [SERVICE: 0x1D8,17:45:40 INFO] [MACHINE 1 INPUT #4] - (HDW) CheckDevNode
    [SERVICE: 0xDF8,17:45:40 ERROR] iTunes is already running...
    [SERVICE: 0x1474,17:45:40 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:45:40 INFO] [1] input #14 from src #0
    [SERVICE: 0x1474,17:45:40 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:45:40 INFO] [1] input #15 from src #0
    [SERVICE: 0x1474,17:45:41 INFO] [InterfaceRemoved]
    [SERVICE: 0x1474,17:45:41 INFO] [1] value = 0
    [SERVICE: 0x1474,17:45:41 INFO] removed device number 1 from m_objDeviceNumberMap
    [SERVICE: 0x1D8,17:45:41 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1D8,17:45:41 INFO] [1] progress is now 1
    [SERVICE: 0x1D8,17:45:41 INFO] [MACHINE 1 TRANSITION] - {Mounted} ==> {Unknown}
    [SERVICE: 0x16C4,17:45:41 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
    [SERVICE: 0x1D8,17:45:41 INFO] [MACHINE 1 ACTIONS] - {Unknown}
    [SERVICE: 0x1B4,17:45:41 ERROR] ERROR!!! Empty Checkpoint!
    [SERVICE: 0x1B4,17:45:41 INFO] <0x4> CItunesDevice::GetCheckPointData() failed
    [SERVICE: 0x1B4,17:45:41 INFO] [1] Progress state is 1, Waiting to disconnect = 0
    [SERVICE: 0x16C4,17:45:41 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x16C4,17:45:41 INFO] [1] input #7
    [SERVICE: 0x1790,17:45:41 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
    [SERVICE: 0x1458,17:45:42 INFO] NOT Mounted
    [SERVICE: 0x1458,17:45:42 INFO] [1] already mounted!
    [SERVICE: 0x1790,17:45:43 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1474,17:45:43 INFO] [1] input #16 from src #0
    [SERVICE: 0x1790,17:45:43 INFO] [1] input #8
    [SERVICE: 0x1B4,17:45:43 ERROR] [1], ERROR, release called when mount lock count is 0
    [SERVICE: 0x1458,17:45:43 INFO] [1] progress state is 1, Waiting to mount = 0
    [SERVICE: 0x1458,17:45:43 INFO] [1] progress state is 1, Waiting to mount = 0
    [SERVICE: 0x1B4,17:45:43 INFO] [1] still don't know format, scanning...
    [SERVICE: 0x1B4,17:45:43 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:43 INFO] [1] Failed to open disk! Try #0
    [SERVICE: 0x1474,17:45:43 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:45:43 INFO] [1] Progress state is 1, Waiting to disconnect = 0
    [SERVICE: 0x1474,17:45:43 INFO] [1] input #17 from src #0
    [SERVICE: 0x1474,17:45:43 INFO] [VolumeRemoved] existing mask 0x10, arrive mask 0x10
    [SERVICE: 0x1D8,17:45:44 INFO] [1] *** DISCONNECTED - Sending event out, device session 1.
    [SERVICE: 0x1B4,17:45:44 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:44 ASSERT] Assertion failure: '0 != m_uchDriveLetter' [File:
    .\DeviceManagement\PnpDiskUtil.cpp, Line: 265]
    [SERVICE: 0x1B4,17:45:44 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:44 INFO] [1] Failed to open disk! Try #1
    [SERVICE: 0x1458,17:45:44 INFO] [1] input #18 from src #389751
    [SERVICE: 0x16C4,17:45:44 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
    [SERVICE: 0x1B4,17:45:45 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:45 ASSERT] Assertion failure: '0 != m_uchDriveLetter' [File:
    .\DeviceManagement\PnpDiskUtil.cpp, Line: 265]
    [SERVICE: 0x1B4,17:45:45 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:45 INFO] [1] Failed to open disk! Try #2
    [SERVICE: 0x16C4,17:45:45 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x16C4,17:45:45 INFO] [1] input #9
    [SERVICE: 0x1790,17:45:45 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
    [SERVICE: 0x1790,17:45:45 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1790,17:45:45 INFO] [1] input #10
    [SERVICE: 0x1B4,17:45:45 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:45 ASSERT] Assertion failure: '0 != m_uchDriveLetter' [File:
    .\DeviceManagement\PnpDiskUtil.cpp, Line: 265]
    [SERVICE: 0x1B4,17:45:45 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:45 INFO] [1] Failed to open disk! Try #3
    [SERVICE: 0x1D8,17:45:45 INFO] [1] progress is now 0
    [SERVICE: 0x1D8,17:45:45 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x1D8,17:45:45 INFO] [1] input #11
    [SERVICE: 0x16C4,17:45:45 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
    [SERVICE: 0x1B4,17:45:46 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:46 ASSERT] Assertion failure: '0 != m_uchDriveLetter' [File:
    .\DeviceManagement\PnpDiskUtil.cpp, Line: 265]
    [SERVICE: 0x1B4,17:45:46 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:46 INFO] [1] Failed to open disk! Try #4
    [SERVICE: 0x16C4,17:45:46 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x16C4,17:45:46 INFO] [1] input #12
    [SERVICE: 0x1790,17:45:46 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
    [SERVICE: 0x1B4,17:45:46 INFO] CreateFile on interface path failed. Last error = 0x2
    [SERVICE: 0x1B4,17:45:46 ASSERT] Assertion failure: '0 != m_uchDriveLetter' [File:
    .\DeviceManagement\PnpDiskUtil.cpp, Line: 265]
    [SERVICE: 0x1B4,17:45:46 INFO] <0x4> GetFormatType() returned unknown format 4
    [SERVICE: 0x1B4,17:45:46 ERROR] ERROR!!! Empty Checkpoint!
    [SERVICE: 0x1B4,17:45:46 INFO] <0x4> CItunesDevice::GetCheckPointData() failed
    [SERVICE: 0x1790,17:45:47 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1790,17:45:47 INFO] [1] input #13
    [SERVICE: 0x1D8,17:45:47 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
    [SERVICE: 0x1D8,17:45:47 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1D8,17:45:47 INFO] [1] input #14
    [SERVICE: 0x16C4,17:45:47 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
    [SERVICE: 0x16C4,17:45:47 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x16C4,17:45:47 INFO] [1] input #15
    [SERVICE: 0x1790,17:45:47 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
    [SERVICE: 0x1790,17:45:47 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1790,17:45:47 INFO] [1] input #16
    [SERVICE: 0x1D8,17:45:47 INFO] [MACHINE 1 INPUT #14] - (HDW) CheckDevNode
    [SERVICE: 0x1D8,17:45:48 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x16C4,17:45:48 INFO] [MACHINE 1 INPUT #15] - (HDW) CheckDevNode
    [SERVICE: 0x16C4,17:45:48 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x16C4,17:45:48 INFO] [1] input #17
    [SERVICE: 0x1790,17:45:48 INFO] [MACHINE 1 INPUT #16] - (HDW) Interface Removal
    [SERVICE: 0x1790,17:45:48 INFO] [1] Got interface removed while in state 0, do nothing!
    [SERVICE: 0x1790,17:45:48 INFO] [1] input #18
    [SERVICE: 0x1474,17:45:48 INFO] [DevNodesChanged]
    [SERVICE: 0x1474,17:45:48 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x1474,17:45:48 INFO] [1] input #19 from src #0
    [SERVICE: 0x1D8,17:45:48 INFO] [1] input #19
    [SERVICE: 0x16C4,17:45:48 INFO] [MACHINE 1 INPUT #17] - (HDW) CheckDevNode
    [SERVICE: 0x1790,17:45:48 INFO] [MACHINE 1 INPUT #18] - (APP) Mountlock Mount
    [SERVICE: 0x1790,17:45:48 INFO] [1] Begin Mounting...
    [SERVICE: 0x16C4,17:45:48 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1790,17:45:48 INFO] [1] progress is now 2
    [SERVICE: 0x1790,17:45:48 INFO] USB
    [SERVICE: 0x1D8,17:45:48 INFO] [MACHINE 1 INPUT #19] - (HDW) CheckDevNode
    [SERVICE: 0x1D8,17:45:49 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x1790,17:45:49 INFO] FAILED
    [SERVICE: 0x1790,17:45:49 INFO] [1] progress is now 3
    [SERVICE: 0x1458,17:45:49 INFO] [1] progress state is 3, Waiting to mount = 0
    The iPod updater logging file cannot be found.
    While I'm obviously frustrated that 7.1 did not resolve my issue, I'll try hard to keep that frustration at bay and
    will make myself available to help diagnose and correct this problem. Contact me directly via email if I can be of
    assistance to Apple and Microsoft on getting this working.
    multiple   Windows XP   XP Upgraded to Vista Ultimate
    multiple   Windows XP   XP Upgraded to Vista Ultimate

    Well, I found a workaround for my issue. It's described in this article:
    [url="iPod not recognized correctly on Toshiba laptop"]http://docs.info.apple.com/article.html?artnum=300836[/url]
    By disabling the "Sandard Enhanced PCI to USB Host Controller" in device manager, my iPod was correctly recognized and I was able to sync with iTunes. That's the good news.
    The bad news is that: a) Windows warns me that my "device can operate faster if connected to a USB 2.0 port" - and the sync with iTunes runs slowly; b) if I reanable that USB device (as suggested in the Apple article, my iPod is no longer recognized.
    For now, I'll just disable this device when I need to sync, then reenable it when done. But this is going to be a pain. I really don't consider this a fix. It's really annoying that the iPod is the only USB device that requires this kind of nonsense.
    Looking forward to a "real" fix for this some time soon.

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

Maybe you are looking for

  • HTML tags for certain values in a report

    Hi, I have built a report with a list of patient visit to a doctor. This is roughly a custom calendar with the names of the patients at different predefined hours. I am now trying to display a canceled visit by adding a strike through line for the pa

  • How to Install and boot-up New Blank Hard Drive

    I am looking to install a new hard drive on my 2007 MBP C2D. I currently have a stock 200GB 5400rpm Toshiba hard drive installed and I am looking to upgrade. I was looking at a Seagate momentus 320GB 7200rpm SATA or a Western Digital 500GB 5400rpm SA

  • Download issue with Oracle 9i DataBase

    I get the 404.htm error when I click the file download link.

  • Generate thread dump without sending ctrl-break on Win32

    I have a server application running as a service on Win2k (we use Service+ to do this). The output of the console is piped to a text file which we can monitor. But, I can't figure out how to generate a thread dump while running in this configuration.

  • .FLAC Audio suport in Premiere Pro CS6?

    I try http://valion.net/flacimporter64/ but doesn't work in CS6. It's one of most used lossless formats.