WOW is very slow when using the linksys router

If I connect directly into my cable modem I and run and play WOW with no problem, if I connect back the wireless router the proformance is very slow and can't see the characters sometimes. Is there a setting to turn off or lower the filters?
I have the 54GS

You may need to forward ports in order to make it work properly. This http://portforward.com/cportsnotes/battlenet/wow.htm would be a help.

Similar Messages

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

Unablr to connect when using the Linksys router

I'm using the WRT54Gx2, version 2 router and have configured it per the directions and with a computer directly connected and logged into the router it connects to SBCglobal just fine. When I try to connect to the internet with the computer (not a wireless connection) it will not connect. I'm using a new computer running vista - if that makes a difference. I also tried connecting using another computer running xp and it will not connect.
Any suggestions?

If it's a speedstream or westell modem, you'll need to change the router's address. Do you need to click an SBC icon or enter a username/password to get online on the modem or is it automatic?
The box said windows xp or better... So I installed Linux!

My macbook works normally connected to the charger, but it is very slow when using the battery. What can I do?

I have a Macbook Pro 13'' 2011 OS X 10.9.4, and recently it started giving this problem, which the macbook works well while connected to the charger, but when i use it only with the batery it gets really slow. But in the report system of the macbook says that the battery is operating normally. It has alreary 822 cycles.

Perform a SMC reset:
http://support.apple.com/kb/HT3964
If there is no meaningful change, open System Information>Power and post the following from your MBP:
(Make certain that the charger is connected)
Ciao.

HT1338 my computer it's very slow when surfing the internet?

my computer it's very slow when surfing the internet

Hello again
As suggested I checked all CPU data in the Activity Monitor folder and could not see anything running that appeared to be draining CPU space or competing with other applications. The following are the results from the Activity Monitor data:
CPU: %User - 0.37, %System - 0.62, %Idle - 99.12
System Memory: Free - 4.90GB, Wired - 1.15GB, Active - 1.48GB, Inactive - 468.1MB, Used - 3.09GB
I also ran a test on my Mac using www.sppedtest.net, the results are as follows:
Ping Speed - 1575ms, Download Speed - 0.15Mbps, Upload Speed - 0.04Mbps
I am hoping this provides enough information to direct me on what next to check as my Mac internet performance is still poor.
Thank you for your time

Adobe is slow when using the reader

adobe is slow when using the reader; It is very slow when I give to another person

I am working in Windows 7.
I have a pdf with 1900 pages of maps. I am using adobe acrobat 10 standard and sampling adobe acrobat xI pro. When I click on links moving from each map takes about 8 secs. when I save the file and give to someone that is just using adobe reader the process takes 20 to 30 seconds to move.

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

My iphone 3g is very slow when accessing the internet is there anyway i can improve this

my iphone 3g is very slow when accessing the internet is there anyway i can improve this

What have you done thus far to try and remedy your situation? Have you taken the recommended basic troubleshooting steps outlined in the User Guide?

I did software update for IOS 8 and my I phone 5s coming very slow while using the Internet please I need advise

I did software update iOS 8 for my I phone 5s after That my phone coming very slow when i using internet

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lsot due to a reset.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

Firefox is very slow when using RDP

Firefox is fast when using Windows directly. But when using RDP it is very slow. For example, empty new tab takes about 6 seconds to open. The RDP connection is fast and other programs response immediately (e.g. browsing of the same pages in IE is fast).
What is the problem with Firefox?

Could it be graphics hardware acceleration??
You probably need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.). On the remote system:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
Then restart Firefox. Does that make any difference?

VLC very slow when using libva/vaapi on a Sandy Bridge HD3000

Hi,
this Problem is driving me crazy. On my X220t Laptop i am trying to get the vaapi in vlc working.
my vainfo output:
libva: VA-API version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/i965_drv_video.so
libva: va_openDriver() returns 0
vainfo: VA-API version: 0.32 (libva 1.0.15)
vainfo: Driver version: Intel i965 driver - 1.0.15
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileH264Baseline : VAEntrypointVLD
VAProfileH264Baseline : VAEntrypointEncSlice
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileVC1Simple : VAEntrypointVLD
VAProfileVC1Main : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
Video acceleration with mplayer is working fine, but with vlc is not. But i want to use vlc
When i activate the GPU acceleration in the codecs tab the video becomes very choppy an slow. It's like one frame every 2-4 seconds. Unwatchable.
I've tried different Versions from 1.1.x to 2.x and its the same every time. Don't get me wrong without vaapi the video ist smooth but my cpu usage is around 50%. I want to bring it down to save some power when i'm on battery.
Thanks for your help

I haven't been able to get vaapi working with VLC yet on my X220, but I have found if you use Compiz (or add a clutter environment variable if you use the Gnome 3 shell), the video output is pretty good in VLC. I am using VLC successfully in Arch XFCE, Fedora 16 Gnome, and Mageia 1 KDE.

NIFB OPC very slow when using server explorer

We use Foundation Fieldbus for data acquisition only, to acquire bulk temperature data from Rosemount 848T devices.
We use FBUS Configurator for engineering and set up via a softing FG-100FF/HSE linking device. Operational data is acquired by a softing FG-100FF/M fieldbus to modbus TCPIP gateway onto a PLC.
On the engineering PC (Windows-Xp) The NI software bundle apparently comes communications manager 4.01 which is OPC foundation registered. Having launched NI server explorer on this machine I can drill down the device tags and read them approx 200 tags.
OPC would enable a more direct route to SCADA and a more scalable system for future requirements. Hence we have purchased a new Windows 7 PC and a licensed communications manager v4.1 to test performance of the OPC DA server. Having used the interface configuration utility and connected the new PC to the network I can again see my 4 segments with all my 848T devices. The problem is each each time I try expand the segment/block 5~10 minutes go by before the screen updates. I have set up 6 tags for reading by server explorer but the update is again very slow in comparison to when it is run on the engineering PC. The engineering PC is not connected at the same time as the new OPC PC.
1] ON the New OPC PC - Should the interface config utility have offline Boards as on the Engineering PC?
2] Does the New OPC PC need to by catered for in the fieldbus project, included in the Schedule?
Any tips/suggestions from more experienced user would be greatly appreciated.
Kind Regards
Warren

setAutoCommit = false did not make a difference
Server OS: Ubuntu 10.04 64bit
My OS: Win 7 64bit
JDBC: 5.1.18
JDK: 6u25
my java code doesnt seem that relevant, it's very straightforward.
the processing time for my code is extremely fast, it's just when I get to pstmt.executeBatch(); for the remote server, that is when it takes time. I am about to test on another remote server and see if that makes a difference.
here is my connection:
Class.forName("com.mysql.jdbc.Driver");
 conn = DriverManager.getConnection("jdbc:mysql://"+databaseHost+":"+databasePort+"/"+databaseName,databaseUserName,databasePassword);
 conn.setAutoCommit(false);here is my prepared statement code and loop:
String query = "INSERT INTO teams (id,name,abbr,meet_id) VALUES (?,?,?,?);";
 PreparedStatement pstmt = conn.prepareStatement(query);
 for(int i=1; i<table.length; i++)
 String[] data = table.split(";");
 pstmt.setInt(1, Integer.parseInt(data[map.get("Team_no")]));
 pstmt.setString(2, data[map.get("Team_name")]);
 pstmt.setString(3, data[map.get("Team_abbr")]);
 pstmt.setInt(4, meetID);
 pstmt.addBatch();
pstmt.executeBatch();
 pstmt.close();
Edited by: sabre150 on Jan 17, 2012 12:48 PM
Moderator action : Added { code } tags so the code is formatted correctly.
Edited by: 908427 on Jan 17, 2012 5:42 AM

Keyboard will only type in uppercase, trackpad will high light multiple when clicking, app windows move VERY slow when using corners

I recently spilled a slight amount of water on my Mac Book Pro. I thought I was able to remove and wipe the majority of it off but I believe some may have seeped between my keys. Ever since, keys on my keyboard do not work or they type in all caps, my trackpad will select multiple objects when I click once (i.e. I attempt to open an application and it will select 5 applications and open all), when I use my hot corners to move between windows, the window I click on will 'zoom in' a very slow speed.
Could this all be a result of water damage? Or something further?
Please let me know if more information is needed.
Thanks,
PM

I recently spilled a slight amount of water on my Mac Book Pro. I thought I was able to remove and wipe the majority of it off but I believe some may have seeped between my keys. Ever since, keys on my keyboard do not work or they type in all caps, my trackpad will select multiple objects when I click once (i.e. I attempt to open an application and it will select 5 applications and open all), when I use my hot corners to move between windows, the window I click on will 'zoom in' a very slow speed.
Could this all be a result of water damage? Or something further?
Please let me know if more information is needed.
Thanks,
PM

Retrieval very Slow when using Partition in ASO

Hi - I have partitioned my ASO cube using Transparent partition and I amretrieving it thru BSO.The retrieval for some combinations are VERYVERY SLOW in Excel.We have over 250,000 members.I have usedRetrieval Buffer and Retrieval Sort Buffer sizes of 10000KB and1000KB respectively.Some retrievals take more than 4 minutes. When Designing Aggregation for ASO, I have used the Recommendedviews to materialize aggregation. Do I have to do or change some settings for better Performance? Any help would be greatly appreciated. Thanks, Narain

Making direct I/O (in place of default buffered I/O) candefinitely help a lot.Then you can increase some data file cache upto 2GB [as per yoursys support]. Also check about your dedicated parallel processsides.I wish it helps.

Encore CS5 very slow when selecting the File tab

Good morning.
This is the first I have ever experienced this. Encore CS5 is extremely slow when I try to select the file Tab. All other tabs like Edit are fine. It is also takes forever to Save anytime. I usually just use Encore for short no menu DVD's I'm building a DVD with a few sideshows and an hour of video. I haven't started the menu yet. I updated the latest from Adobe yesterday and I am current with the Window 7 64 bit updates. All other applications in the Master Suite work fine. I think my system should be enough to run Encore without any problems. Any suggestions? I'm all ears!...
CASE: Cooler Master HAF 932
MB: Gigabyte GA EX 58 UD5
VIDEO: Nvidia FX 4800
CPU: i7-860 2.8 Ghz 8mb Cache
COOLER: Zalman CNPS9700LED
RAM: G Skill F3-8500CL7S Rip Jaw 24 GB
HD: (3) Western Digital Caviar Black 2TB 7200/64MB/Sata
HD: (2) Western Digital Caviar Black 500GB 7200/64MB/Sata built as RAID0
HD: (1) Raptor 500GB for Operating System
SOUND: Creative X-fi SB 1040EF
OS: Windows 7 Home premium 64 Bit
Thanks,
Art

Do you have Windows hard drive Indexing ON or OFF?
Some Win7 notes...
http://forums.adobe.com/thread/789809?tstart=0
More Tips http://windowssecrets.com/comp/110127
Utilities http://windowssecrets.com/comp/110106 (Soluto for startup)
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
Harm's Tools http://forums.adobe.com/thread/504907
Also http://www.tune-up.com/products/tuneup-utilities/
Also http://personal.inet.fi/business/toniarts/ecleane.htm

WOW is very slow when using the linksys router

Similar Messages

Maybe you are looking for