WoW, wine and the x3100
Just made the switch back to linux, due to a job I may be getting. Major issue's with WoW though.
So I'm pretty much going to post a screen shot. I've tried many different WTF configs, and the default still give me this problem so I'm not going to post that. My thoughts are its directly related to the intel driver (using newest from aur)
EDIT
Fixed, though now it crashes whenever I load it in opengl mode, but its a start.
Last edited by kb3pev (2010-03-14 17:01:52)
StuMx wrote:
Did you edit your config.wtf file? if not just add the following to your file:
SET gxAPI "OpenGL"
or try running it with the -opengl flag
wine "/path/to/WoW/Wow.exe" -opengl
Yes, I have tried both of those. I read through the entire arch wiki entry on WoW and followed it exactly, no success. I have also tried directx mode just in case it would prefer that, still corruption.
I previously used Ubuntu and had no issues whatsoever. Not complaining, I just know that at one point it did work with my video card. That was the lucid build so it would have been 10.04 catalyst drivers?
Similar Messages
-
Digital Editions for win and the ASUS ea800
hiya,
First things first: if you're someone inclined to point out that the ASUS ea800 does not appear on the supported devices page, you're a dolt and i would prefer that you didn't.
Now, my query is of the general form: why doesn't Digital Editions for Windows recognise my device? What is the procedure for investigating this issue? Are there knowledge base articles/instructions for this, and if so, where do they live?
Cheers,
andrew phiya,
Thanks for the reply: i wasn't really expecting one after my use of the word "dolt;" it's just that the device doesn't appear on the 'compatible devices list,' but it is actived for DRM and by all accounts, it should work.
To be sure, towards the end of this video (a review of the EA800 by Good Ereader i think; can hardly see a thing, but...)
http://www.youtube.com/watch?v=5Sx8AYBAKFE
the fellow does just that: the EA800 appears as a bookshelf in Digital Editions and content is managed flawlessly. In addition, the device he has is a pre-release version that ASUS sent him.
cheers,
a -
At my office, we've been using Shutterstock to get images. Recently we got some images to use for badge templates, and I've mass edited them in Bridge so that they'll have similar keywords and naming conventions. Now however, when I try to open specific files, the error pops up here:
I assume that through deleting some keywords and adding new ones in bridge, I've messed up the files.
I've tried looking around some forums, but I can't find my specific error, especially with there being no listed context...
I use both Bridge and Illustrator CC 2014. The files in question are all .eps files. They are all vectors downloaded off of shutterstock, during a 30 day subscription.
At the office we use Windows 7 computers.
Can anyone help me out? As we've been stumped on this one for a few days.Lunalutra,
One thing often tried first is to create a new document and File>Place the (PDF contents, if any, of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself (you may search for that specific string in the error meesage when you get to it):
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html -
Wine and WoW: Severe Graphical Corruption
I am running the ATI proprietary drivers (Radeon 4890) and the Wine package from the repos. When I run WoW through wine I experience terrible graphical corruption:
http://img169.imageshack.us/img169/2536/screentb.jpg
I should note that my Catalyst Conrol center does not launch.
Any help with this?StuMx wrote:
Did you edit your config.wtf file? if not just add the following to your file:
SET gxAPI "OpenGL"
or try running it with the -opengl flag
wine "/path/to/WoW/Wow.exe" -opengl
Yes, I have tried both of those. I read through the entire arch wiki entry on WoW and followed it exactly, no success. I have also tried directx mode just in case it would prefer that, still corruption.
I previously used Ubuntu and had no issues whatsoever. Not complaining, I just know that at one point it did work with my video card. That was the lucid build so it would have been 10.04 catalyst drivers? -
couldn't find the adequate forum. I run win 8.1 and the adobe acrobat dc app on my computer doesn't access the doc cloud. I can´t turn the mobile link on. I can access the cloud from my browser, but not from the desktop app. I can access from my mobile app.
Can you please post a screenshot of your Acrobat DC when launched, without opening a PDF?
Thanks,
-Amboo -
After installing win 8.1 and the latest itunes version iTunes does no longer detect my iPhone. On my iPhone I now suddenly get the question: Do you trust this computer (after connecting to the usb port)
Try this!
I had the same problem as you an it worked for me.
http://support.apple.com/kb/HT1923 -
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
thanks in advance,,,ahmad_uetlhr09 wrote:
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
Boot Camp does not come on DVD, what did you install. -
I ask the third time:
How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
hope of feed back: e-mail: [email protected]Chris Cox answered your question here:
I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen? -
i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help
Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.
-
just got my ATV2 and the stream from my win 7 Itunes library drops out after 30min of when changing movies. I have to turn off and turn on home share to stream again. Should i return all my apple products and go android instead....help, I want it to work. My firewall is off, ATV2 is running on ethernet and library is on wireless. My ps3 streams just fine over the network, I assume Itunes is at fault?
Please any one who comes across this and shares in my fustrations please click below and lodge a complaint. There is no solution to the dropouts until apple sorts it...Lets get the message across loud and clear
http://www.apple.com/feedback/appletv.html -
The title says it all ...
I had to reinstall Win 7 and PS CS5, and the updates fail even when opened using 'run-as-admin'. Why?If you are using Help 》updates, it is outdated. You can however go to Product Updates on the Adobe.com website and download your updates there. I am not at my desk b<t when I get back, I'll get the links unless someone else can do that sooner.
-
why when i download anything thru firefox and try to run it says its not a valid win 32 application and the properties show it is empty
-> Tap ALT key or press F10 to show the Menu Bar
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
If the problem persist check this link:
Unable to download or save files
https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files
Check and tell if its working. -
We have created two partitions in removable drive(USB). One of the partition is active and the other is hidden. We are trying to access the hidden partition in Win PE 3.0 environment using WMI. VBScript code snippet used to detect the partitions is given
below:-
SetobjWMIService = GetObject("winmgmts:"_&
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
Select * from Win32_LogicalDisk")
It will return the partition which is active but fails to list the partition which is hidden. The same piece of code was supported on WinPE 2.0I am giving the complete code, may be you are able to understand better. We are using Win32_LogicalDisk to retrieves the complete information of all the drives (like C:, D:) including removable drives.
Function
LocalDriveFound()
strComputer =
SetobjWMIService = GetObject("winmgmts:"_
"{impersonationLevel=impersonate}!\\"&
strComputer & "\root\cimv2")
SetcolDisks = objWMIService.ExecQuery
"Select * from Win32_LogicalDisk")
ForEachDiskDrive
IncolDisks
DriveLetter = Left(DiskDrive.Name,1)
DriveType = DiskDrive.DriveType
VolumeName = DiskDrive.VolumeName
WScript.echo Driveletter &
"|"& Drivetype &
"|"&VolumeName
SelectCaseDriveType
Case2 ,3
'Fixed or removable
If(VolumeName=USBVolumeName)
Then
If(DriveLetter<>
"Z")
Then
ChangeDriveLetterWithMountvol DriveLetter,
"Z"
EndIf
bIsLocal=
True
EndIf
If(VolumeName=USBRootName)
Then
If(DriveLetter<>
"Y")
Then
ChangeDriveLetterWithMountvol DriveLetter,
"Y"
EndIf
bIsLocal=
True
EndIf
CaseElse
EndSelect
Next
SetDrives =
Nothing
SetFileSystemObject =
Nothing
End
Function -
hey.. when i upgred to cc 2014 all my old projects and the new dose not open anymor and they r whait and have no logo of the program .. like AE or PR ..win 7 , cc2014
You originally posted on a thread that really wasn't related to your problem, so I branched the discussion.
Check the Windows System Event Viewer to see the details of the crash, most importantly the name of the faulting module.
Most crashes on Open or Save are due to OS bugs (especially on MacOS) or bugs in third party extensions to the OS open and save dialogs. -
I have a license for LR 5 (Win) and also have the CC Photography membership. Can I install and use LR on Windows PC and MAC?
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
Maybe you are looking for
-
How to load SD files from Canon Vixia HF200 to Imovie or Final Cut???
I use a card reader and the finder shows a folder "PRIVATE" with several subfolders: AVCHD>BDMV>CLIPINF and Playlist and Stream. It appears that the clips are loaded under the Stream folder as files with .MTS extensions. These files are labeled as MP
-
Validation for ordergroup and costcenter
hi , how to write validation for , at the time of document entry when we give cost center , order should be mandatory ( this order should be from a particular order group) ie document should should get posted only the orders from a particular order g
-
Reset to previous RESTORE POINT only possible with FLASHBACK ?
Ok, I can create a Restore Point (in v10g) by a command like: CREATE RESTORE POINT foobar; Actually I expected a symmetric command which reverts the whole database back with a command like RESET to RESTORE POINT foobar; However I did not found such a
-
Hey guys, I'm a bit feeling low. I was working on my iMac and wanted to restart my device. But since then nothing's the same. It gets stuck on grey screen with spinning circle. Here is what I tried so far: 1. Tested to boot into Bootcamp (Win7) - it
-
Can I deploy Mathscript subfunctions without revealing .m source code?
Good morning. I am developing MATLAB algorithms containing functions and subfunctions. To integrate them in LabVIEW, I plan to use Mathscript nodes. And if I do so, I have to leave the subfunctions .m files in a repository on the PC (right?). My prob