WoW wireless Headset Mic latency issue with windows 7

I have an latency problem with my mic. I tried to record something with different audio programs (audition, audacity) but i couldn't hit the beat.
the monitoring was enable so i could hear and watched that my voice was time delayed.
Im running windows 7 64bit on my pc, so Im a bit confused, because the problem is just occured on the mac os, as i read in the other threads.
I disabled the Thx, EQ and VoiceFX in the control panel to get the same "settings" like the mac users by deleting the THXTruStudioPCUSBAudioPlugin.kext but it didnt worked for me.

Plug the Droid in and then find the device driver, remove the device driver, restart windows and your Droid and try again.
Here is a link for additional information http://www.droidforums.net/forum/droid-general-discussions/22437-windows-7-will-not-sync-my-droid.html

Similar Messages

Wow Wireless Headset Mic stops working on Mac OSX 10.6.3

I'm running the April drivers and firmware for my wireless wow headset. After the install of the drivers all was working great. No lag from mic etc. I shutdown my computer went to bed. Next day I booted up, worked a bit and then turned on my headset. Sound worked fine but no mic input detectable from any application. Unplugged the transmitter and replugged it. Sound still works but not mic. I rebooted with the headset on and mic worked. I assumed headset needed to be on during boot up. This morning same thing but even reboot with the headset on doesn't give me microphone functionality.
I've double checked the mic is plugged in properly to the headset but i just can't get any sound out of it.

Ok, I found a work around. It seems the mic doesn't initialize sometimes when i boot up and power on the head set. I can tell the mic isn't working because if i press the mute button the red light doesn't come on indicating I'm muted. To fix this i power off the headset and power it back on. This takes several attempts. I also found it seems to do better at initializing when its not plugged into the charging cable.

WoW wireless headset error during driver install windows

Was installing the drivers that i downloaded from the creative website and around half way through the install this error msg popped up"error in launching C:\windows\temp\CRF001\mint64.exe", the install proceeded anyway and kept install before i even hit the ok button on the error box. After the reboot and installation for the latests firmware and rebooted again. I paired the headset up to the usb stick after the 8 hour battery charge and tried to open the audio control panel and it said that it couldn't find the device. I checked device manager and it shows the headset is working fine and all my other applications like vent also see that the headset is there. Even the ALchemy program that came with the install can't find it.
I uninstalled the drivers and reinstalled them and got the same error msg and the audio control panel still can't find it.
I'm running win7 64 bit. anyone know whats going wrong?
The headset itself seems to work fine even with that error during driver installation, but can't get that audio control panel to access whatever features it has.

For your temporary directory entries you listed, simply try this:
If you have WinRar, WinZip, WinAce or even 7-Zip, right click the executable and choose extract to.....and extract the files to any folder you wish. Then open that folder and run the installer manually. Sometimes the Creative Labs programs have a problem when creatiing a folder in the Windows temporary directory.
If that does not work, you can try this for a longshot.
http://ccftp.creative.com/manualdn/D...US_2_11_01.exe
That is a product identification patch for X-FI's and it is designed to fix the detection of those cards under Windows 7. Perhaps this would work for you, it is small and you could always create a system restore point, install it, and if you dont like it, uninstall it and restore back.

World of Warcraft Wireless Headset fails to work with Xbox360 wired controller

Hey all, i've experienced a rather unique problem ever since the original release of the WoW wireless headset.
It works perfectly (Great headset, by the way, except for this one huge issue.) normally, however, upon plugging a Microsoft Xbox 360 controller into another USB port, the sound goes out on the headset.
This problem has existed for me since the original commercial release of the wireless headset. Back then, I opened up a ticket, but didn't really get any help on the issue. The support tech just told me to update my drivers and firmware, despite me already having done that. Eventually, I gave up on trying to fix the issue, since I felt I didn't really have enough games I played on the PC to justify bothering with this bug anymore.
Unfortunately, with the holidays coming up, things have changed, and I was looking to get some help on what the cause of this might be, and how to fix it.
I should mention that the headset works perfectly in conjunction with the controller, on my laptop, which runs Windows 7. The computer that has the problem in question runs Windows XP.
I've checked the audio output, and, after plugging the controller in, the headset is listed as the audio output option. In addition to that, with some jury rigging (Rebooting the computer after plugging the controller in, for instance.) I can get limited sound. However, it is so staticy, extremely low quality, and crackly, as to be almost physically uncomfortable to listen too. Nevermind actually being able to discern what it is i'm actually listening too.
I also have a surround sound system plugged into my computer. I originally assumed that this might be the problem. However, I recently had to move my computer, and the surround sound system is not currently plugged into the computer. The headset still does not work on XP when the 360 USB controller is plugged in.
This problem has persisted beyond a wipe of the hard-drive and re-install of the OS, as well.
Has anyone else experienced this problem, and been able to fix it?

You might want to:
. Uninstall the headset, make sure all related applications are removed.
2. Perform a clean boot of your system
3. While your system is in it's clean boot state, reinstall the headset.
Do test the headset with a different USB port on your main computer to see if it makes a difference. Hope this hel
ps.
Customer Support can be contacted using this email form if you require further assistance.

Mac OS X, WoW Wireless headset Audio Control Panel

Any updates on the Audio Control panel? As far as I know no mac user has gotten it to work with the headset. The error I found and posted (emailed as well) i hope would have been a lead to fixing it. Any news would be great.
Posting the error again just incase it's gotten over looked (posted in an other thread).
This is about a bug I found in the os X version of the wow wireless headset control panel.
Running the "Audio Control Panel" in the "Sound Blaster World Of Warcraft Audio Control Panel app" I get the following error. (.app are really just packages, so right click on it and view package and you'll find the real app in there under Contents\MacOS\Audio Control Panel).
Last login: Thu Jul 15 00:32:25 on ttys000
/Applications/Sound\ Blaster\ World\ Of\ Warcraft\ Audio\ Control\ Panel.app/Contents/MacOS/Audio\ Control\ Panel ; exit;
XXX-Mac-Pro:~ XXX$ /Applications/Sound\ Blaster\ World\ Of\ Warcraft\ Audio\ Control\ Panel.app/Contents/MacOS/Audio\ Control\ Panel ; exit;2010-07-15 00:34:59.905 Audio Control Panel[2854:903] *** Illegal NSComboBoxCell data source (<IlluminationViewController: 0x128010>). Must implement numberOfItemsInComboBoxCell: and comboBoxCellbjectValueForItemAtIndex:H
IDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.logout
[Process completed]
From a google search this site seems to say you've linked the data to the cell not the actual ComboBox.
http://www.cocoabuilder.com/archive/xcod
e/267584-nscomboboxdatasource-problems.h
tml
Aslo could be looking for HIDBuildMultiDeviceList in the wrong place?
Mac OS X 10.6.4
MacPro4,1
SB WoW Wireless Headset:
Product ID: 0x30d9 Vendor ID: 0x041e (Creative Labs) Version: 1.00 Speed: Up to 12 Mb/sec Manufacturer: Creative Technology Location ID: 0x5d100000 Current Available (mA): 500 Current Required (mA): 100
Thanks,
Casey

The headset works for me... but the control panel does not.
I get this error:
None of the features work. Not EQ, not voice FX, not THX - NOTHING.
And there is no way to clean uninstall to reinstall the drivers - I am having to manually sniff around the system folder... Try and resintstall - same issue.
Is there not a Beta Driver we can try and help with?
Cause this is an expensive failure right now.

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

WoW Wireless Headset Not Charging

I bought my WoW wireless headset in August and so far haven't had many problems, except for when fully charged I can't seem to talk on it unless I plug the USB cord. But today for some unknown reason I will not charge. I tried using different computers and different USB ports and nothing. It will light up for 5 to 0 seconds then go black. For what I paid for this headset it should last longer than it did. Seriously does Creative just slap a few cheap pieces together put the WoW logo on it and charge 0 times what they should?

Hi,
Sorry about that, please write to Customer Support and ask for an RMA.

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Itunes issues with Windows having to do with Apple's patent

I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Itunes issues with windows 8... laggy?

anyone one else having abit a of laggy issue with playing music on windows 8?
i just upgraded to windows 8 con. preview, and its great and fast.
i use to have windows 7 and itunes never skipped a beat.
i have a sony viao with an upgraded ram and ssd hdd.
and its pretty fast.
so i dont think its my computer and windows 8 seems to be fine.
anyone else having this issue? but it only happens now and then.......
NOTE:
i have my music all copied to my sdd hdd aswell
and thats all thats really on there as i have ext. hdd's.
i have a average size library in itunes with around about 50gb of music.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

I have called HP-Support and the answer was:
«Thank you for contacting HP Active Chat Support.
This is in continuation to our response with regards to your chat ID: 63381567
As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
Start the computer.
Press the F10 key to enter the BIOS setup.
Select Restore Defaults .
Under Load Defaults , select Yes .
Choose Save Changes and Exit .
Under Save Changes and Exit , choose Yes .
If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
Open Control Panel .
Expand View by: and select Large Icons .
Click Administrative Tools .
Double-click Services .
Double-click Telephony .
Under the General tab, expand Startup Type , then select Automatic .
Click Apply , click Start , then click OK .
Restart the system.
If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
The issue was not resolved.
So I'm waiting for the release of the new driver...

Is there a known issue with windows 8 supporting itunes?

each time I update itunes I lose my itunes store connection and therefore can't update apps etc. Is this a known issue with windows 8 users?

Yes. Some are complaining.
Search iTunes.exe. RIght Click, Properties, Compatibility, Click Run this program as Adminitrator. OK.
See if this helps

Where is the forum for Windows Update issues with Windows 10 TP 9926

Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

Might try them over here.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

WoW wireless Headset Mic latency issue with windows 7

Similar Messages

Maybe you are looking for